MANUAL - Lichtgitter GmbH

More documents

Recommendations

Info

SP P Square Gratings In accordance with the instructions of the professional associations, square gratings should be avoided where only two supports are provided, in order to ensure bearing bars are not running in the wrong direction following erection. Where it is not practical to avoid supplying square gratings, supports should be provided for all four sides of the grating, or arrangements should be made to prevent installation with bearing bars running in the wrong direction. This can be achieved for example, by welding a 20 x 3 flat bar x 20 mm long, to the side of at least one of the side bearing bars, with at least 10 mm projecting SP P Hazards generated by falling objects Mesh Pitch In accordance with the instructions of the professional association (see BGI 588) only gratings for working platforms with a maximum pitch of approximately 34,33 x 50,8 mm are permissible. Furthermore is determined in the standard EN ISO 14122 „Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways“, Article 4.2.4.4. „Hazards ge- 20 below the grating, at a suitable distance away from bearing bar supports (see detail). These flat bars can be fixed upon request of the clients nerated by falling objects“ that „the flooring of a working platform or walkway shall only have such maximum openings that a ball with a diameter of 35 mm cannot fall through.“
21 P Pressure-Locked Gratings Pressure-Locked Gratings
Page 1: MANUAL
Page 4 and 5: Lichtgitter - Head Office Stadtlohn
Page 6 and 7: 6 A G I
Page 8 and 9: Technical Terms Metal floors are gr
Page 10 and 11: Service To us „Service“ means
Page 12 and 13: SP Forge-Welded Gratings Permanent
Page 14 and 15: SP Forge-Welded Gratings Forge-weld
Page 16 and 17: SP Load table for Forge-Welded Grat
Page 18 and 19: SP Standard Gratings All standard g
Page 22 and 23: P Pressure-Locked Gratings Roughly
Page 24 and 25: P Pressure-Locked Gratings Pressure
Page 26 and 27: P Loadtable for Pressure-Locked Gra
Page 28 and 29: P Standard Gratings and stairtreads
Page 30 and 31: SP bearing bar dimension P Loadtabl
Page 32 and 33: SP P Fixings for Gratings Fixings a
Page 34 and 35: SP clamp clamp clamp P Fixings Hook
Page 36 and 37: P Façade gratings Lichtgitter faç
Page 38 and 39: P Convector Covers More and more ne
Page 40 and 41: Floor of an intermediate storage ha
Page 42 and 43: B Production Perforated Metal Plank
Page 44 and 45: BP-Ü BN-O Perforated metal planks,
Page 46 and 47: BP BR The table indicates the distr
Page 48 and 49: BP BR The table indicates distribut
Page 50 and 51: BN-G The table indicates distribute
Page 52 and 53: BZ The table indicates distributed
Page 54 and 55: BZ The table indicates distributed
Page 56 and 57: BP BR BZ Loadtable for concentrated
Page 58 and 59: B Treads Standard and tailor-made p
Page 60 and 61: B Fixings for Perforated Metal Plan
Page 62 and 63: BZ BP-Ü Adaptive elements at floor
Page 64 and 65: BP BR Protection panels made from p
Page 66 and 67: T Spiral Staircase „LG Standard
Page 68 and 69: T Spiral Staircase „LG Standard
Page 70 and 71:
T Spiral Staircase „LG Special“
Page 72 and 73:
T Spiral Staircase„LG Special“
Page 74 and 75:
SP P B Serration Metal gratings hav
Page 76 and 77:
SP P B Serration Test results of se
Page 78 and 79:
Surface treatment The preferred sur
Page 80 and 81:
SP P B Surface Treatment 1. Surface
Page 82 and 83:
SP P B Tolerances Gratings and perf
Page 84 and 85:
P Tolerances Tolerances (deformatio
Page 86 and 87:
SP P B Static Load Calculations Spa
Page 88 and 89:
SP Static Calculations Calculation
Page 90 and 91:
Calculation example: Perforated met
Page 92 and 93:
SP P B Production Production Produc
Page 94 and 95:
SP Notes for invoice P Complete rec
Page 96 and 97:
SP Enquiry-/Order Form P (Stamp of
Page 98 and 99:
Main Works Stadtlohn Lichtgitter Ge
Page 100:
Head Office Stadtlohn Lichtgitter G
show all

MANUAL - Lichtgitter GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?