MANUAL - Lichtgitter GmbH

Lichtgitter ceiling patterns, in aluminum
or other materials, offer an economical
and decorative finish wherever halls,
assembly rooms or other places of any
size are decorated in a modern way.
Lichtgitter ceiling patterns are distinguished
by the following features:
● Venting property: Air can circulate
unconstrained and the whole room
can be ventilated and/or air-conditioned.
● Light transmittance: An optimal antiglare
room-illumination is achieved
by an advantageous dispersion of all
reflexions.
● Dust: Dirt cannot accumulate.
Therefore, maintenance is not necessary.
● Acoustic absorption: Acoustic
waves are broken and, therefore,
noise levels are reduced.
● Lightweight: No overload of ceiling
construction.
● No electrostatic charging.
● Lichtgitter ceiling patterns do not
create any fire hazard.
● Attractive shapes: These provide
many new interior design possibilities
for architects.
● Rich range of colours and surfaces:
Lichtgitter ceiling patterns can be
supplied unfinished, coloured, anodised,
baked painted or plasticlaminated
in all RAL-colours.
Ceiling patterns can be used as insert
ceilings with decorative and functional
features in any room. They can be laid
out seamlessly or endlessly one after
another.
When indirect anti-glare lighting is
Types Heights Heights
of of
bearing bars cross bars pitch
37
P Ceiling Patterns
required, lighting rows or other lamps
can be placed above ceiling pattern.
Cables and other supply pipes, heating,
air conditioning and acoustic absorption
equipment can be usefully installed
between room ceiling and ceiling pattern.
They are invisible, but easily accessible
for repair or maintenance.
30 mm 30 mm ca. 33 x 33 mm
60 mm 60 mm ca. 33 x 66 mm
60 mm 60 mm ca. 66 x 66 mm
Endlessly/seamlessly fixed ceiling
patterns
One possible suspension
Special Gratings