Aluminium Louvre Systems - Ullrich Aluminium

More documents

Recommendations

Info

ULLRICHALUMINIUMMODEL UL5354V/UL5354HMODEL:UL5354V & UL5354HAPPLICATION:Vertical or horizontal sunscreen commercialbuildings, hospitals, covered paths.MATERIAL:All blades are extruded from 6000 seriesaluminium alloy.All screws and rivets are stainless steel.FINISH:Louvre components can be supplied in either mill,anodised or powdercoated fi nish.SIZES:Can be manufactured to suit opening up to6000mm high x 2000mm wide.TO SPECIFY:Louvres shall be Ullrich Aluminium model UL5354Hor UL5354V. Blade pitched to suit opening.Finishing – see above.Installation shall be as per manufacturersrecommendations.– For typical fi xing details see page 21FREE AIR:UL5354V = 77%UL5354H = 54%RHSSECTION15
ULLRICHALUMINIUMMODEL UL5354V/UL5354HNOTE: Pitch can be varied to suit height. Louvre blades are riveted to braces and either riveted or bolted to supports. 2000mm max width.For fabrication drawing details contact Ullrich Aluminium Sales.16
Page 1 and 2: ULLRICH LOUVRE SYSTEMSSTANDARDSTORM
Page 3 and 4: ULLRICHALUMINIUMMODEL UL3101/UL3102
Page 5 and 6: ULLRICHALUMINIUMMODEL UL1368NOTE: P
Page 7: ULLRICHALUMINIUMMODEL UL1089NOTE: P
Page 10 and 11: ULLRICHALUMINIUMMODEL UL7173MODEL:U
Page 12 and 13: ULLRICHALUMINIUMMODEL UL1572BMODEL:
Page 14 and 15: ULLRICHALUMINIUMMODEL UL3101B/UL310
Page 18: ULLRICHALUMINIUMTYPICAL FIXING DETA

Aluminium Louvre Systems - Ullrich Aluminium

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?