Standard Shock Absorbers - JHBennett.com

Standard Shock AbsorbersSUB-MINIATURE, NON-ADJUSTABLE, FULL-THREADED BODY SERIESNEW!Enertrols NEW SM 9, SM 10,SM 25 and SM 75 Sub-MiniatureSelf-Compensating SeriesENERTROLS new durable line of Sub-Miniature non-adjustable shock absorbers offers highenergyabsorption capability in confined spaces. The wide range of Effective Weightcapacities for these rugged black-oxide finished models permits the handling of a varietyof damaging impact load conditions. Dependable sub-miniature self-compensating modelshocks offer smooth deceleration over a wide range of conditions. Applications for thesereliable units include; small linear slides, material handling and packaging equipment,small robotics, medical and office equipment. See pages 24, 27 & 29 for Energy CapacityRatings, complete dimensional data and “How to Order” information.STANDARD & ARMOR LINE MINIATURE, NON-ADJUSTABLE,FULL THREADED-BODY SERIESEnertrols versatile, high-capacity, miniature, non-adjustable hydraulicshock absorbers offer true linear deceleration to protect relativelysmall, high-speed moving machines and equipment. Standardblack oxide finish models and Armor Line models areidentical dimensionally and in their energy capacities.Accessories (see page 30) are the same for adjustableand non-adjustable models.These “self-compensating” shocks are available in manydifferent Effective Weight ranges to solve a wide range ofsmall, but damaging impact problems. A built-in positivestop in this series prevents bottoming out damage andprovides a positive work-positioning point. See pages 24, 28& 31 for Energy Capacity Ratings, complete dimensional dataand “How to Order” information.SERIES 150SERIES 225SERIES 450SERIES 600STANDARD & ARMOR LINE MINIATURE, ADJUSTABLE, FULL THREADED-BODY SERIESENERTROLS miniature, adjustable, hydraulic shock absorbers feature completely threaded bodies for almost unlimited mountingversatility. They permit mounting, in or through a threaded hole in the mounting structure, at almost any point along the shockabsorber body. Standard models feature an attractive black oxide finish. Armor Line models were developed for corrosiveapplications and have a thin, dense chrome-plated finish that is FDA approved. Both series are identical dimensionally and in energyabsorbing capacity. SA 30m and SA 35 models are some of the new additions to the Enertrols line.SA 35SA 1/4 x 1/2SA 30mStandard black oxide finish models may be installed using an optional universalmounting bracket (internally threaded) for foot or flange mounting. A jam nutlocks the bracket anywhere on the body. Positive stops built in all modelsprevent bottoming out the shock absorbers.All Enertrols threaded-body models feature a locking adjustment. Theyare shipped prefilled with hydraulic oil, ready to use with no externalpiping or components required. See pages 24, 29 & 31 for EnergyCapacity Ratings and dimensional data plus “How to Order” information.Armor LineModel SALD 1 /2 x 1-SA3/4" Bore Model4575-310STANDARD MID-SIZE, THREADED-BODY, NON-ADJUSTABLE SERIES 33,45 & 64Enertrols larger Mid-Size Threaded-Body, Non-Adjustable, Self-Compensating shock absorbers aredesigned for higher capacities to a maximum Effective Weight capacity of 140,400 lbs. Four effectiveweight ranges are available per model. Threaded bodies permits mounting, in or through a threadedhole, in the mounting structure at almost any point on the black oxide finished body. Studmounting using the furnished jam nut is the simplest. All of the mounting accessoriesoffered for the Sub-Miniature series (above) are available for the Mid-Size shocks. Seepages 30-31 for Energy Capacity Ratings and dimensional data plus “How to Order”information for 32 different models