4096-630 - General Dynamics SATCOM Technologies

More documents

Recommendations

Info

4096-630General Dynamics Satcom Technologies 1.2M Ku-BAND Rx/Tx SERIES 11322.2 FEED SUPPORT ASSEMBLYNOTE:These instructions are intended as a general reference for feedsupport assembly. If your antenna system has specific feed supportinstallation instructions, then refer to them at this time.CAUTION:During the assembly procedure, the sequence of instructionsmust be followed. DO NOT TIGHTEN ANY HARDWARE UNTILINSTRUCTED. Refer to the feed support parts list and steps.FEED SUPPORT PARTS LIST - TABLE 2.2ITEM NO. PART NO. DESCRIPTION QTY1 VARIES Feed Rod 22 VARIES Feed Support Tube 13 8031-008 5 / 16” x 1.00” Bolt34 8031-026 5 / 16” x 3.25” Bolt15 8201-041 5 / 16” Flatwasher86 8202-041 5 / 16” Lock Washer47 8101-009 5 / 16” Hex Nut49
4096-630General Dynamics Satcom Technologies 1.2M Ku-BAND Rx/Tx SERIES 1132See Detail ASTEP 1.A) Attach feed rods to reflector with(items: 3, 6, 7 and with [ 2 ] of (item5).NOTE: The 2.00” flat end of thefeed rod mounts to the outside rimof the reflectorFeed RodsSTEP 2.A) Attach feed support tube to thereflector with (items: 3, 6, 7)and with [ 2 ] of (item 5).Feed Support Tube10
Page 1 and 2: 4096-630May 29, 2007ASSEMBLY MANUAL
Page 3 and 4: 4096-630General Dynamics Satcom Tec
Page 9: 4096-630General Dynamics Satcom Tec
Page 15: 4096-630General Dynamics Satcom Tec

4096-630 - General Dynamics SATCOM Technologies

Create successful ePaper yourself

Delete template?

Save as template?