Fire Resistant ARCTIC-SHIELD Fabric - SEI Industries Ltd.
Fire Resistant ARCTIC-SHIELD Fabric - SEI Industries Ltd.
Fire Resistant ARCTIC-SHIELD Fabric - SEI Industries Ltd.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Fire</strong> <strong>Resistant</strong><strong>ARCTIC</strong>-<strong>SHIELD</strong> <strong>Fabric</strong><strong>Fire</strong> <strong>Resistant</strong> (FR) Arctic-Shield has been specifically designedfor the Canadian climate and is the most advanced fabric on themarket today for use in above ground secondary containmentberms. Exclusive to <strong>SEI</strong>, this proprietary fabric comes in tan/greenand features the following:ProductInsta-BermL-RodProduct Application TableDrumsandTanksCollasp.FuelTanksEquipment Vehicles TransferAreax x x1. Suitable for deployment to -50 °C2. Impermeable to fuel and hydrocarbons3. <strong>Fire</strong> <strong>Resistant</strong> per NFPA 7014. Exceeds the requirements set by Canadian Council ofMinisters of the Environment (CCME) Environmental Codeof Practice for Above Ground and Underground StorageTank Systems Containing Petroleum and Allied PetroleumProducts for secondary containment5. Meets Environmental Canada regulations for fuel storageInsta-BermFrameRide-SideVehicleBermx x x xx x x xMini-Berm x x x<strong>SEI</strong> can use (FR) Arctic-Shield for any of its manufacturedsecondary containment products including Frame SupportedInsta-Berms (Frame or L-Rod), Mini-Berms, Ride-Side Bermsand Drip Defenders.<strong>SEI</strong> can also provide certified secondary containment drawingsfor site permitting.DripDefenderx x x<strong>SEI</strong> <strong>Industries</strong> <strong>Ltd</strong>. 7400 Wilson Ave, Delta, BC Canada V4G 1H3604.946.3131 seisales@sei-ind.com www.sei-ind.com
<strong>Fire</strong> <strong>Resistant</strong><strong>ARCTIC</strong>-<strong>SHIELD</strong> <strong>Fabric</strong>SpecificationsSTANDARD METRICBASE FABRICBase <strong>Fabric</strong> Weight 7.87 oz/yd 2 268 g/m 2<strong>Fabric</strong> / StylePolyester / WovenCOATED FABRICTotal Weight 36±2 oz/yd 2 1220±68 g/m 2Coat TypeTPUCoating Distribution 50 / 50MATERIAL PROPERTIESASTM TESTMETHODS<strong>SEI</strong>’s Insta-Berms (Frame and L-Rod) and othersecondary containment systems help industriesmeet today’s strict guidelines on environmentalprotectionThe following fluids are acceptable forsecondary containment in Arctic-Shieldberms: Jet A, Jet B, JP-1, JP-4, JP-8,kerosene, avgas, diesel fuels with lessthan 60% aromatic content. Specificationssubject to change without notice.1NFPA 701 is a vertical flame test morerigorous than ULC-ORD-C58.9.2Material tested after 30 days inASTM IRM 902 reference fuel at roomtemperature. This test exceeds ULC-ORD-C58.9 and meets CanadianCouncil of Minsters of the Environment(CCME) above ground secondarycontainment requirements.Tensile Strength, Grab Warp 600 lbs 2,670 NFill 500 lbs 2,220 ND751-AStrip Tensile Strength 363 x 373 lbs/in 636 x 636 N/cm D751Tear Strength, Tongue Warp 100 lbs 445 NFill 100 lbs 445 ND751-BPuncture, Screwdriver 100 lbs 445 N D751Puncture, Ball 600 lbs 2,670 N D751Hydrostatic Resistance 600 psi 4.1 MPa D751-AAdhesion RF 40 lbs/in 70 N/cm D751Low Temp -65 °F -54 °C D2136High Temp, Cont/Interim 180 / 200 °F 82 / 93 °C D1204Abrasion Resistance(Wheel H18 / 1 kg)Flame Resistance 1 Warp 0.4 secFill2,000 cycles D38840.6 secImmersion Testing 2 Strip Tensile 99% retainedWeightThicknessRF Adhesion-3.0% change+3.5% change98% retainedNFPA 701D471Diffusion 6.23 x 10 -5 oz/ft 2 /h 0.019 g/m 2 /h MIL-T-52983<strong>SEI</strong> <strong>Industries</strong> <strong>Ltd</strong>. 7400 Wilson Avenue, Delta, B.C. Canada V4G 1H3604.946.3131 seisales@sei-ind.com www.sei-ind.com
Change language