T-Set Trifold.pdf - Hunting Titan

T-Set ® Firing HeadsT-Set Size(in)[mm]Assembly PartNumber †Contact KitPart NumberIgniterTypeUpper HeadConnectionNo. 5 2005-000-000 2005-000-002 BP3/BP4 1-3/16”-12 GO Box2010-000-000 2010-000-002 BP3/BP4 1-3/16”-12 GO Box2010-000-020 2010-000-022 BP3/BP4 3-1/8” O.D. GO Quick-Change Assembly2010-000-040 2010-000-042 BP3/BP4 2-3/4” O.D. GO Quick-Change AssemblyNo. 102010-000-070 2010-000-072 BP3/BP4 3-1/8” O.D. SIE Quick-Change Assembly2010-000-100 - GO 3-1/8” O.D. GO Quick-Change Assembly2010-000-105 - RED 3-1/8” O.D. GO Quick-Change Assembly2010-000-111 - GO 3-1/8” O.D. SIE Quick-Change Assembly2010-000-115 - RED 3-1/8” O.D. SIE Quick-Change Assembly2020-000-000 2020-000-002 BP3/BP4 1-3/16”-12 GO Box2020-000-020 2020-000-022 BP3/BP4 3-1/8” O.D. GO Quick-Change Assembly2020-000-070 2020-000-072 BP3/BP4 3-1/8” O.D. SIE Quick-Change AssemblyNo. 20 2020-000-100 - GO 3-1/8” O.D. GO Quick-Change Assembly2020-000-105 - RED 3-1/8” O.D. GO Quick-Change Assembly2020-000-111 - GO 3-1/8” O.D. SIE Quick-Change Assembly2020-000-115 - RED 3-1/8” O.D. SIE Quick-Change AssemblyBP3/BP4 Firing HeadsCorporate Sales & Tech Services 16770 Imperial Valley Dr. Houston, TX 77060 (281) 448 2200Europe & North Africa Tech Sales Badentoy Ave. Portlethen, Aberdeen AB12 4YB +44 (0) 1224 787 127Middle East Technical Sales Building B23, Oilfield Supply Centre, Jebel Ali, Dubai +971 4 887 6850Asia Pacific Technical Sales 403 Cilandak Commercial Estate, Jl. Raya Cilandak KKO, Jakarta 12560 +62 21 7807865Distribution Centers1.50 [38]1.72 [43]2.13 [54]2.50 [64]6110-000-000 6110-000-002 BP3/BP4 1-3/16”-12 GO Box6035-000-111 - GO 3-1/8” O.D. SIE Quick-Change Assembly3.50 [89]6035-000-115 - RED 3-1/8” O.D. SIE Quick-Change Assembly3.63[92] WST-3625-115 - RED 3-1/8” O.D. SIE Quick-Change Assembly†All firing heads rated to 400°F (204°C), 20,000psi (138MPa), 600VDC and 2,000mA. Viton O-rings needto be used above 325°F (163°C)T-Set Igniters and Power ChargesGO Firing HeadBossier City, LA 711114710 B Viking Dr.Toll Free: (877) 549 0847Phone: (318) 549 0844Fax: (318) 549 0845Bridgeport, TX 764261033 CR 1300Toll Free: (866) 683 2726Phone: (940) 683 2726Fax: (940) 683 8326Dilley, TX 780173271 W. FM 117Toll Free: (800) 221 0145Phone: (830) 378 5944Fax: (830) 378 5945DuBois, PA 15801165 Enterprise DriveToll Free: (877) 771 4840Phone: (814) 371 4840Fax: (814) 371 4814Marietta, OH 457502345 State Route 821Toll Free: (877) 374 6323Phone: (740) 374 6323Fax: (740) 374 6363Marshall, TX 756726390 Hwy 59 SouthToll Free: (888) 831 8633Phone: (903) 923 0990Fax: (903) 923 0997Schriever, LA 703951717 Highway 311Toll Free: (866) 958 4826Phone: (985) 872 2686Fax: (985) 872 2581Shafter, CA 9326319479 Creek RdPhone: (661) 746 6544Fax: (661) 746 6554T-Set Size (in)[mm]1 Hour Temp.Rating (°F)[°C]PowerChargeSlow SetChargeStandardCharge1.50 [38] Compact Single Stage1.72 [43] Compact Single StageHDO-1500-100HDO-1500-100----2.50 [64] Compact Single Stage HDO-2500-200 - -3.50 [89] Compact Single Stage HDO-3500-100 - -400 [204]3.63 [92] Compact Single Stage HDO-3625-100 - -1.72 [43] Multi-Stage HDO-1687-100 - -2.13 [54] Multi-Stage HDO-3625-100 - -3.25 [83] Multi-Stage JEC-5336-099 - -4.50 [114] Multi-Stage 250 [121] JEC-0450-140 - -Size 05- - BPC-0800-005SSize 10 400 [204]- BPC-1300-010 BPC-1300-010SSize 20 - BPC-1500-020 BPC-1500-020ST-Set Adapter KitsT-Set Size(in)[mm]Assembly PartNumberAdapter Type1.72 [43] WST-1500-040 Adapter kit to 1-11/16” O.D. setting tool setting adapter2.50 [64] WST-2500-040 Adapter kit to #10 setting equipmentWST-5321-023MTop sub adapter to TCP firing head3.50 [89] WST-5303-117Adapter kit to #10 setting equipmentWST-5303-120Adapter kit to #20 setting equipmentWST-3625-120MTop sub adapter to TCP firing head3.63 [92] WST-5303-117Adapter kit to #10 setting equipmentWST-5303-120Adapter kit to #20 setting equipmentSize 10 2010-000-101M Top sub adapter to TCP firing headSize 20 2020-000-101-MOD Top sub adapter to TCP firing headPrimaryIgniterSecondaryIgniterDET-2700-074 -DET-2700-075DET-2700-076T-Set Bleeder valve & Wrench AssembliesT-Set Size(in)[mm]1.50 [38]1.72 [43]2.13 [54]Size 053.25 [83]3.63 [92]4.50 [114]Size 10Size 20Bleeder WrenchPart NumberStem TypeBleeder ValveAssemblyBleeder WrenchPart NumberWST-2125-146 WST-2125-142 WST-2125-150WST-5125-146 WST-5125-142 WST-3625-244Rupture Disc TypeBleeder ValveAssemblyWST-2125-135(WST-2125-138redress kit)WST-3625-135(WST-3625-138redress kit)Torque SocketAssembly-WST-3625-240ATorque SetStem TypeBleeder ValveRED Firing HeadAdapter KitsRupture Disc TypeBleeder ValveBroussard, LA 70518204 LaffertyToll Free: (866) 848 2610Phone: (337) 837 1135Fax: (337) 837 1137Casper, WY 826042702 North 6 Mile Rd.Toll Free: (877) 496 8174Phone: (307) 472 1138Fax: (307) 472 1310Clairmont, Alberta, CanadaT0H 0W0 Bay 3, 10219 88 Ave.Phone 1: (780) 538 0096Phone 2: (780) 538 0042Fax: (780) 538 0052Cleburne, TX 760334723 N. Hwy 171Toll Free: (877) 779 9717Phone: (817) 202 9717Fax: (817) 202 9721Manufacturing CentersPERFORATING HARDWAREPampa, TXToll Free: (800) 692 4486Phone: (806) 665 3781Oklahoma City, OKToll Free: (800) 692 4486Phone: (806) 665 3781Right Tools. Right Location. Right Time.Copyright © 2012 Hunting Energy Services. All Rights Reserved.Edmonton, Alberta, CanadaT6E 4W8 9757 51 AvenuePhone 1: (780) 989 1040Phone 2: (780) 989 1042Fax: (780) 989 1059Ellisville, MS 39437626 County Home Rd.Toll Free: (888) 477 3260Phone: (601) 477 3260Fax: (601) 477 3259Grand Junction, CO 815043164 Pipe CourtToll Free: (855) 523 0544Phone: (970) 523 0544Fax: (970) 523 0549Hobbs, NM 882406524 S. Eunice HwyPhone: (575) 393 0659Fax: (575) 393 0657TCP SYSTEMS & T-SET ®Milford, TXToll Free: (800) 320 5110Phone: (972) 493 1200ENERGETICSMilford, TXToll Free: (800) 320 5110Phone: (972) 493 2580Odessa, TX 797653508 S. County Rd. #1290Toll Free: (877) 883 8153Phone: (432) 561 8153Fax: (432) 561 5067Oklahoma City, OK 731278600 W. Reno Ave.Toll Free: (866) 448 4826Phone: (405) 682 2680Fax: (405) 682 2681Robstown, TX 78380415 Industrial Blvd.Toll Free: (877) 909 3055Phone: (361) 387 3055Fax: (361) 387 3218INSTRUMENTSPampa, TXToll Free: (800) 692 4486Phone: (806) 665 3781Tyler, TXPhone: (903) 581 5675Tyler, TX 757085072 Shirley Dr.Toll Free: (866) 526 0260Phone: (903) 526 0260Fax: (903) 526 3810Van Buren, AR 729563011 River Road EastPhone: (479) 474 0107Fax: (479) 474 0651Williston, ND 588014953 Hwy 85 SouthPhone 1: (701) 572 5510Phone 2: (701) 572 5515Fax: (701) 572 5520www.hunting-intl.comwww.titanspecialties.comsales@titanspecialties.comsupport@titanspecialties.com0417130314SLFamily of Setting Toolswww.hunting-intl.com 800 320 5110 or +1 972-493-1200

Size 05 – 10 – 20 T-SetFeatures• Case hardened pressure cylinders• Black oxide coated components• Options for bleeder valvesBenefits• Greater surface hardness and increased abrasive wear from case hardening• Black oxide coating improves corrosion and chemical resistance• Bleeder valves provide a safer option to bleed off pressure inside the tool at surfaceThe Size 05 – 10 – 20 T-Set series features a classic design that theoilfield has been familiar with for decades. Hunting Titan has mademany improvements to the original design, making it the most ruggedand reliable setting tool in the oilfield today.The ignition of a slow set power charge creates high gas pressure insidethe setting tool. The generated high pressure gas pushes a piston,which in turn drives hydraulic oil through a small orifice, initiating thesetting sequence. Once the required setting force is achieved, a shearstud breaks releasing the T-Set from the plug/packer.O.D. (in)[mm]No. 051.72 [43]No. 102-3/4 [70]No. 10 Non-Ported2-3/4 [70]No. 10 Non-PortedHigh Pressure3.20 [81]No. 203.81 [97]No. 20 Non-Ported3.81 [97]No. 20 Non-PortedHigh Pressure4.12 [105]Assembly PartNumberRedress KitPart NumberMax. Temp(°F)[°C] †Max. Pressure(psi)[MPa]Length(ft)[m]EmptyWeight(lbm)[kg]Stroke(in)[cm]Max. Setting Force(lbf)[kN]Fishing Strength(lbf)[kN]Upper HeadConnectionWST-BK05-001 WST-BK05-010** 400 [204] 23,500 [162] 6.02 [1.83] 34 [15] 6.0 [15.2] 7,000 [31] 43,900 [195] No. 05 Firing Head PinWST-BK10-001 WST-BK10-010** 400 [204] 18,500 [128] 5.32 [1.62] 64 [29] 5.8 [14.7] 33,000 [147] 139,500 [621] No. 10 Firing Head BoxWST-BK10-201 WST-BK10-010-ND** 400 [204] 18,500 [128] 5.32 [1.62] 64 [29] 5.8 [14.7] 33,000 [147] 139,500 [621] No. 10 Firing Head BoxWST-BK10-### WST-BK10-010-ND** 400 [204] 25,000 [172] 5.32 [1.62] 92 [42] 5.8 [14.7] 33,000 [147] 139,500 [621] No. 10 Firing Head BoxWST-BK20-001 WST-BK20-010** 400 [204] 17,500 [121] 6.24 [1.90] 146 [66] 11.1 [29.2] 55,000 [245] 184,500 [821] No. 20 Firing Head BoxWST-BK20-201 WST-BK20-010-ND** 400 [204] 17,500 [121] 6.24 [1.90] 146 [66] 11.1 [29.2] 55,000 [245] 184,500 [821] No. 20 Firing Head BoxWST-BK20-### WST-BK20-010** 400 [204] 21,500 [148] 6.24 [1.90] 170 [77] 11.1 [29.2] 55,000 [245] 184,500 [821] No. 20 Firing Head Box†Hardware only. Viton O-rings need to be used above 325°F (163°C)** Use “HT” for high temperature operations (above 325°F (163°C))### Use “002” for high pressure assembly; use “101” for high pressure, high temperature assemblyCompact Single Stage T-SetFeatures• Short compact design• Self-bleeding compensating system• Options for bleeder valves• Black oxide coated componentsBenefits• Ideal for horizontal pump down operations• Compensation oil level adjustments are not necessary• Bleeder valves provide a safer option to bleed offpressure inside the tool at surface• Black oxide coating improves corrosion and chemicalresistanceThe compact, single stage T-Set is the shortest setting tool in in the T-Set family. Its low weight andshort length make it ideal for stage frac jobs requiring pump down operations.The top cylinder is filled with oil and self-bleeds with increased temperature. The trouble-free designmakes it quick and easy to redress at the wellsite providing fast turnaround times.The ignition of a slow set power charge creates gas pressure inside the setting tool. The gas migratesthrough the piston initiating the setting sequence. The hydraulic oil slowly bleeds out of the toolproviding a cushioning effect while setting. Once the required setting force is achieved, a shear studbreaks releasing the T-Set from the plug/packer.O.D. (in)[mm]Assembly PartNumberRedress KitPart NumberMax. Temp Max. Pressure( o F)[ o C] † (psi)[MPa]Length(ft)[m]EmptyWeight(lbm)[kg]Stroke(in)[cm]Max. Setting Force(lbf)[kN]FishingStrength(lbf)[kN]Upper HeadConnection1.50 [38] WST-1500-001 WST-1500-010** 400 [204] 20,000 [138]‡ 4.66 [1.42] 17 [8] 6.4 [16.3] 10,000 [44] 19,500 [87] 1-3/16” - 12 GO Box1.72 [43] WST-1718-001 WST-1718-001** 400 [204] 20,000 [138]‡ 4.24 [1.29] 21 [10] 6.4 [16.3] 13,000 [59] 30,750 [137] 1-3/16” - 12 GO Box2.50 [64]Self Bleeding2.50 [64]Manual Bleeding3.50 [89]Self BleedingWST-2500-001 WST-2500-010** 400 [204] 20,000 [138] 4.98 [1.52] 51 [23] 10.5 [26.7] 30,000 [133] 64,500 [287] 1-3/16” - 12 GO BoxWST-2500-002 WST-2500-010** 400 [204] 20,000 [138] 4.98 [1.52] 51 [23] 10.5 [26.7] 30,000 [133] 64,500 [287] 1-3/16” - 12 GO BoxWST-5321-501 WST-5321-110** 400 [204] 15,000 [103] 4.45 [1.36] 94 [43] 9.6 [24.4] 55,000 [245] 172,400 [767]3-1/8” O.D. GOQuick-Change Assembly3.63 [92] WST-3625-101 WST-3625-110** 400 [204] 10,000 [69] 3.29 [1.00] 70 [32] 10.0 [25.4] 55,000 [245] 164,300 [731]3-1/8” O.D. GOQuick-Change Assembly3.63 [92] WST-3625-102 WST-3625-102** 400 [204] 10,000 [69] 3.66 [1.12] 70 [32] 10.0 [25.4] 55,000 [245] 164,300 [731] No. 10 Firing Head Box3.63 [92]High Pressure3.63 [92]High PressureWST-3625-105 WST-3625-110** 400 [204] 15,000 [103] 3.52 [1.07] 76 [34] 10.0 [25.4] 55,000 [245] 164,300 [731]3-1/8” O.D. GOQuick-Change AssemblyWST-3625-106 WST-3625-112** 400 [204] 15,000 [103] 3.89 [1.19] 76 [34] 10.0 [25.4] 55,000 [245] 164,300 [731] No. 10 Firing Head Box†Hardware only. Viton O-rings need to be used above 325°F (163°C)‡No bleeder valve. Assembly with bleeder valve rated to 15,000 psi (103 MPa)** Use “HT” for high temperature operations (above 325°F (163°C))Multi-Stage T-SetFeatures• Long stroke• Higher forces necessary for tubing patches• Self-bleeding compensating system• Options for bleeder valves• Black oxide coated componentsBenefits• Ideal for plugs and packers requiring a long stroke• Compensation oil level adjustments are not necessary• Bleeder valves provide a safe option to bleed off pressure inside the tool at surface• Black oxide coating improves corrosion and chemical resistanceThe Multi-Stage T-Set offers the capability to set plugs and packers requiringlong setting strokes and higher forces necessary for tubing patches.The design concept of the Multi-Stage T-Set is the same as the CompactSingle Stage T-Set. A self-bleeding compensation system allows for quickoil filling without the need for oil level gauges.A larger slow set power charge is used to compensate for the extra pistonmovement required for longer strokes. Once ignited, the generated highpressure gas migrates through the upper and lower pistons initiating thesetting sequence. Like the Compact Single Stage T-Set, the hydraulicoil slowly bleeds out of the tool providing a cushioning effect. Once therequired setting force is achieved, a shear stud breaks releasing the T-Setfrom the plug/packer.O.D. (in)[mm]Assembly PartNumberRedress KitPart NumberMax. Temp(°F)[°C] †Max. Pressure(psi)[MPa]Length(ft)[m]EmptyWeight(lbm)[kg]Stroke(in)[cm]Max. Setting Force(lbf)[kN]FishingStrength(lbf)[kN]Upper HeadConnection1.72 [43] WST-1718-101 WST-1718-110** 400 [204] 20,000 [138] ‡ 7.70 [2.35] 36 [16] 10.5 [26.7] 20,000 [89] 25,000 [111] 1-3/16” - 12 GO Box2.13 [54] WST-2125-101 WST-2125-110** 400 [204] 20,000 [138] ‡ 7.27 [2.22] 53 [24] 10.4 [26.4] 32,000 [142] 52,000 [231] 1-3/16” - 12 GO Box3.25 [83] WST-3250-001 WST-3250-010** 400 [204] 20,000 [138] 10.23 [3.12] 178 [801] 14.9 [37.8] 72,000 [320] 120,000 [534]4.50 [114] WST-4500-001 WST-4500-010** 250 [121] 20,000 [138] 12.88 [3.93] 433 [196] 20.0 [50.8] 95,000 [423] 194,000 [863]3-1/8” O.D. GOQuick-Change Assembly3-1/8” O.D. GOQuick-Change Assembly†Hardware only. Viton O-rings need to be used above 325°F (163°C)‡No bleeder valve. Assembly with bleeder valve rated to 15,000 psi (103 MPa)** Use “HT” for high temperature operations (above 325°F (163°C))Right Tools. Right Location. Right Time.Copyright © 2012 Hunting Energy Services. All Rights Reserved.