11.07.2015 Views

Knot filler - Bøgh Consult Denmark A/S

Knot filler - Bøgh Consult Denmark A/S

Knot filler - Bøgh Consult Denmark A/S

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

We carry a selection of refill bags for the wood repair kit. Thereare two different mixed bags (see below), and these eight coloursare also made as single bags.<strong>Knot</strong> <strong>filler</strong>- the best solution for wood repair<strong>Knot</strong> holes, splits and damage to edges are easily repairedwith the revolutionary <strong>Knot</strong> <strong>filler</strong>. This is a polyamide <strong>filler</strong>specifically developed for wood filling. The polyamide <strong>filler</strong> isa non-toxic product and is very flexible – it expands andcontracts with the wood.The <strong>Knot</strong> <strong>filler</strong> is user friendly as it is applied with a <strong>filler</strong> gun.The surplus <strong>filler</strong> is removed with a chisel after a very shortcooling period (normally a matter of seconds). Now therepair is ready for treatment (oil, stain, paint or varnish).Refill bag 1Refill bag 2BeforeAfterBøgh <strong>Consult</strong> <strong>Denmark</strong> A/SCharles Lindberghs Vej 6DK-9430 VadumT: +45-9827 1919 - F: +45-9827 2081www.boeghconsult.dk – bcd@mail.tele.dkBøgh <strong>Consult</strong> <strong>Denmark</strong> A/SCharles Lindberghs Vej 6DK-9430 VadumT: +45-9827 1919 - F: +45-9827 2081www.boeghconsult.dk – bcd@mail.tele.dk


<strong>Knot</strong> <strong>filler</strong>- How to doBCD180 gun- for use together with <strong>Knot</strong> <strong>filler</strong>1.Place a stick of <strong>Knot</strong> <strong>filler</strong> in thegun.Close alu bag tightly.Technical specifications:Dimensions220x170x35mmWeight250gOperating voltage220-240 V, 50 Hz2.Apply the <strong>Knot</strong> <strong>filler</strong> to therepair area.Working temperatureAdhesiveMelting capacity190 o CThermelt <strong>Knot</strong> <strong>filler</strong> Ø12mm0,3-0,6 kg/hour3.Let the repair area cool for amoment using the chisel or apiece of metal.4.Remove surplus <strong>Knot</strong> <strong>filler</strong> withthe chisel.Operating instructions:1. Plug into a socket 220 V.5.Sand the repair area.2. Heating of the gun, approx. 2 min.3. Put a knot <strong>filler</strong> stick into the gun.4. Upright position - never lay gun on the side!6.Ready for treatment such as oil,varnish or stain.5. Turn off the gun after use and by longer breaks.6. Be careful - the knot <strong>filler</strong> gets very hot!7. Never pull the stick out of the gun.Bøgh <strong>Consult</strong> <strong>Denmark</strong> A/SCharles Lindberghs Vej 6DK-9430 VadumT: +45-9827 1919 - F: +45-9827 2081www.boeghconsult.dk – bcd@mail.tele.dkBøgh <strong>Consult</strong> <strong>Denmark</strong> A/SCharles Lindberghs Vej 6DK-9430 VadumT: +45-9827 1919 - F: +45-9827 2081www.boeghconsult.dk – bcd@mail.tele.dk

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!