Installing Dyna Coils - XJ4Ever

ePAPER READ

DOWNLOAD ePAPER

xj4ever.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Small sections of suitable size shrink-wrap tubing (preferred...)...or electrical tape (better than nothing).Assortment of hand wrenches and/or sockets(preferably deep) and ratchet, 3/8" drive for the1/4" coil-to-bracket mounting bolts and thehorizontal bracket-to-frame mounting bolts.Pair of pliers and/or small vise grips.2

HCP9982 Battery Sensor Bypass Device - XJ4Ever

Installing the Oil Filter Spinon Kit - XJ4Ever

Replacing the Rear Drum Brake Pads - XJ4Ever

CHANGING YOUR HITACHI THROTTLE SHAFT SEALS - XJ4Ever

Page 1: DYNA COIL ADAPTER BRACKETS INSTALLA
Page 5 and 6: You should ALWAYS re-attach these g
Page 7 and 8: 4) Remove the original spark plug b
Page 9 and 10: The preferred procedure illustrated
Page 11 and 12: d) Now, back to the brackets. First
Page 13 and 14: WE STRONGLY SUGGEST THAT YOU TAKE Y
Page 15 and 16: j) Although you may have marked the
Page 17 and 18: A set of these “helping hands”
Page 19 and 20: Step Three: Heat up your trusty sol
Page 21 and 22: If you bought our HCP9740 wire mark
Page 23: We’re pretty much down to final a

Installing Dyna Coils - XJ4Ever

Create successful ePaper yourself

Delete template?

Save as template?