Catalogue classification system · Chapter 1

alfer ®combitech ® system· logika ®The logically perforated profile range · AluminiumAngle, unequal-sided, drilledMin. OU = 5 pcs.Colour Dim. a Dim. b Dim. c PackagingEAN / Item no.EAN / Item no.EAN / Item no.Uncoated aluminiumuncoated 23.5 mm 43.5 mm 1.5 mm looseuncoated 35.5 mm 65.6 mm 2.4 mm looseAnodized aluminiumsilver 23.5 mm 43.5 mm 1.5 mm loosesilver 35.5 mm 65.6 mm 2.4 mm loosetitanium 23.5 mm 43.5 mm 1.5 mm loosetitanium 35.5 mm 65.6 mm 2.4 mm loosePowder-coated aluminiumbeech 23.5 mm 43.5 mm 1.5 mm loosebeech 35.5 mm 65.6 mm 2.4 mm looseT-profile, drilledlength: 1.00 m4001116 23012 74001116 23002 8length: 1.00 m4001116 23162 94001116 23152 04001116 23312 84001116 23302 9length: 1.00 m4001116 23462 04001116 23452 1length: 2.00 m4001116 23062 24001116 23052 3length: 2.00 m4001116 23212 14001116 23202 24001116 23362 34001116 23352 4length: 2.00 m4001116 23512 24001116 23502 3length: 2.50 m4001116 23112 44001116 23102 5length: 2.50 m4001116 23262 64001116 23252 74001116 23412 54001116 23402 6length: 2.50 m4001116 23562 74001116 23552 8Catalogue classification system · Chapter 1 · 99950 024 · 71708 · 1009Min. OU = 5 pcs.Colour Dim. a Dim. b Dim. c PackagingUncoated aluminiumuncoated 35.5 mm 68.6 mm 2.4 mm looseEAN / Item no.length: 1.00 m4001116 23005 9EAN / Item no.length: 2.00 m4001116 23055 4EAN / Item no.length: 2.50 m4001116 23105 6Anodized aluminiumsilver 35.5 mm 68.6 mm 2.4 mm looselength: 1.00 m4001116 23155 1length: 2.00 m4001116 23205 3length: 2.50 m4001116 23255 8titanium 35.5 mm 68.6 mm 2.4 mm loosePowder-coated aluminium4001116 23305 0length: 1.00 m4001116 23355 5length: 2.00 m4001116 23405 7length: 2.50 mbeech 35.5 mm 68.6 mm 2.4 mm loose4001116 23455 24001116 23505 44001116 23555 9User tipsApart from untreated aluminium, our logika ®profiles are also available in anodised or powder-coated silver, titanium and beechcolouredfinishes. They have a particularly attractive and technical appearance, which is ideally suited for bulding designer furniture.These six profiles are available in up to four sizes, which can all be combined and installed with one another, irrespective of size.This is a result of the hole measurements from the centre of one hole to another with the two gap sizes 25.0 mm and 12.5 mm,which thus fit over each other exactly.alfer ®aluminium Gesellschaft mbH · Horheim, Industriestrasse 7 · D-79793 Wutoeschingen · Tel.: +49 (0)7746 9201-0 · Fax: +49 (0)7746 9201-92 · E-mail: info.eng@alfer.de · www.alfer.com1.08