Fastrack - DieMMe

InstallationThe Fastrack system from BSW is quicklyinstalled, using a very cost effectivemethod. The finished surface meetshighest demands. The base mat is aspecially formulated grade of Regupol,the famous brand successfullymanufactured from rubber andpolyurethane by BSW for decades. Thebase mat is prefabricated under verycontrolled circumstances in our factoryto guarantee a consistent quality anduniform physical properties. The toplayer consists of a stabilizing mesh ontop of which the PUR/EPDM compoundis applied ”wet-in-wet”.432151.The existing surface is levelled, compacted and the slopeis re-adjusted. If required, the drainage system is repairedor renewed.2. The Regupol ® base mat is loose laid on to the dynamicbase.3. The stabilizing mesh is applied on top of the Regupol ®base mat and fixed with PUR seal coating.4.On top of the stabilizing mesh the self-levelling polyurethanecoating is applied. Into the freshly poured polyurethanecompound special EPDM granules are broadcast to achievea granulated texture subject to the specifications.Alternatively, a structural spray-coating can be applied ontop of the mesh.5. The next day the lines can be put on to the finished surface.