Part Numbering System

More documents

Recommendations

Info

TMTMPart Numbering SystemSOICSmall Outline Circuit - Gull Wing LeadsSOL 16 MLeadPlating-OptionDEVICEBODY WIDTHSERIES MILS MMSO 150 3.9mmSOL 300 7.5mmSOM 220 5.6mmSOP 208 5.3mmSOW 330~350 8.4~8.9mmSOX 400 10.0mmSOY 450 11.4mmSOZ 525 13.3mmPitch = 50 mil (1.27mm) StandardNUMBER LEADSPACKAGINGM = TubesE4A = 4” Tape & ReelE7A = 7” Tape & ReelE13A = 13” Tape & ReelX = Small Qty.LEAD PLATINGBlank = Sn85/Pb 15TIN = Sn100B = Sn97/Bi3.0C = Sn98/Cu2.0OPTIONBlank = unspecifiedDE = Daisy Chain EvenISO = Isolated28 ©2003 TopLine. All Rights Reserved. Rev. 2/03
TMPart Numbering SystemSubstituting SOICTubeSOL20MSOL20M-DESOL20M-DE-DIEPlating = Sn85/Pb15Plating = Sn85/Pb15Plating = Sn85/Pb15PackDC = NoDIE = Not SpecifiedDC = YesDIE = Not SpecifiedDC = YesDIE = YesSOIC Body WidthSO 150milSOP 208milSOM 220milSOL 300milSOW 330milSOX 400milSOY 450milSOZ 525milNoLeadFreeYesReelSOL20E13AApplication =General PurposeSOL20E13A-DEApplication =Continuity TestSOL20E13A-DE-DIEApplication =Temperature Profileand Continuity TestPackTubeReelSOL20M-TIN SOL20M-TIN-DE SOL20M-TIN-DE-DPlating = -TIN, C or BDC = NoDIE = Not SpecifiedPlating = -TIN, C or BDC = YesDIE = Not SpecifiedPlating = -TIN, C or BDC = YesDIE = YesSOL20E13A-TIN SOL20E13A-TIN-DE SOL20E13A-TIN-DE-DCheaperMore ExpensiveSuffix Codes:"DIE" is sometimes abbreviated to "D"."DE" = Daisy Chain "Even" (1-2, 3-4, 5-6, 7-8, etc) "ISO"= Isoloated connections "BUS" = All Leads Connected.Lead Free Plating: "TIN" = Sn100, B = Sn97/Bi3.0 C = Sn98/Cu2.0Pack: "M" = Tubes, E13A = 13" Reels, E7A = 7" Reel (special), "X" = mini Pack BagsPitch in mils: Always 50mils (1.27mm). No code necessary.©2003 TopLine. All Rights Reserved. Rev. 2/0329
Page 1 and 2: TMPart Numbering SystemSeries Page
Page 3 and 4: TMPart Numbering SystemQuick Guide
Page 5 and 6: TMPart Numbering SystemSubstituting
Page 27: TMPart Numbering SystemSubstituting
Page 35 and 36: TMPart Numbering System(Temporary B
Page 73 and 74: TMPart Numbering SystemDO - Through
Page 75 and 76: TMPart Numbering SystemNotes©2003

Part Numbering System

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?