Part Numbering System

More documents

Recommendations

Info

TMPart Numbering SystemCERQUADCeramic Quad Flat PackCERQUAD 68 F 50-OptionsBODYCERAMIC = CeramicQuad Flat PackNUMBER LEADSLEAD PITCH (MIL)MIL MM50 1.27mm30 0.8mm25 0.635 or 0.65LEAD STYLEF = Flat Leads with Tie Bars (Standard)G = Gull WingOPTIONSBlank = With Lid, Gold LeadsN = Without LidDE = Daisy Chain EvenISO = IsolatedSC = Solder Coat leadsEnd is attachedto tie-barCeramicGlassEnd is attachedto tie-barFlat Leadon lead frameGull-Wingwith tie-bar50 ©2003 TopLine. All Rights Reserved. Rev. 2/03
TMPart Numbering SystemSubstituting “CERQUAD”Gull Leads on Tie-BarCERQUAD196G25-NCERQUAD196G25-N-ISOPlating = GoldPlating = GoldLeadsDC = NoISO = Guaranteed IsolatedDIE = Not SpecifiedDIE = Suitable for Die AttachFlat Leads on Tie-BarCERQUAD196F25-NCERQUAD196F25-N-ISONoCERQUADWithLidApplication =General PurposeApplication =General PurposeApplication =Continuity TestApplication =ContinuityYesGull Leads on Tie-BarCERQUAD196G25CERQUAD196G25-SCCERQUAD196G25-DECERQUAD196G25-DE-SCPlating = GoldPlating = Solder CoatedPlating = GoldPlating = Solder Coat / TinnedLeadsDC = NoDC = NoDC = YesDC = YesDIE = Not SpecifiedDIE = Not SpecifiedDIE = Not SpecifiedDIE = Not SpecifiedFlat Leads on Tie-BarCERQUAD196F25CERQUAD196F25-SCCERQUAD196F25-DECERQUAD196F25-DE-SCCheaperMore ExpensiveSuffix Codes:"DE" = Daisy Chain "Even" (1-2, 3-4, 5-6, 7-8, etc) "ISO"= Isolated connectionsPlating: Blank = Gold SC = Solder Coated with Tinned Sn63 SolderPack: "G" = Gull Wing Leads on Tie Bar "F" = Flat Leads on Tie-Bar.Note: "F" and "G" Leads must be trimmed and formed by customer prior to assembly.©2003 TopLine. All Rights Reserved. Rev. 2/0351
Page 1 and 2: TMPart Numbering SystemSeries Page
Page 3 and 4: TMPart Numbering SystemQuick Guide
Page 5 and 6: TMPart Numbering SystemSubstituting
Page 35 and 36: TMPart Numbering System(Temporary B
Page 49: TMPart Numbering SystemSubstituting
Page 73 and 74: TMPart Numbering SystemDO - Through
Page 75 and 76: TMPart Numbering SystemNotes©2003

Part Numbering System

Create successful ePaper yourself

Delete template?

Save as template?