Hutapea CV - August 2012 - Temple University
Hutapea CV - August 2012 - Temple University
Hutapea CV - August 2012 - Temple University
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Education<br />
CURRICULUM VITAE<br />
<strong>August</strong> <strong>2012</strong><br />
Parsaoran <strong>Hutapea</strong><br />
Department of Mechanical Engineering<br />
1947 N 12 th Street<br />
Philadelphia, PA 19122<br />
Phone: (215) 204-7805, Email: hutapea@temple.edu<br />
2001-2004 Postdoctoral Research Associate, Lehigh <strong>University</strong><br />
Research: Reliability of Microelectronics and Optoelectronics Packages<br />
Mentor: Prof. J. L. Grenestedt<br />
1997-2000 Ph. D. Aerospace Engineering, North Carolina State <strong>University</strong><br />
Dissertation: Microstress Prediction in Composite Laminate<br />
Advisor: Prof. F. G. Yuan<br />
1995-1997 M. S. Aerospace Engineering, North Carolina State <strong>University</strong><br />
Thesis: Effect of Thermal Aging on the Mode I Fracture Toughness of<br />
IM7/LaRC-RP46 Composites<br />
Advisor: Prof. F. G. Yuan<br />
1991-1995 B. S. Aerospace Engineering, North Carolina State <strong>University</strong><br />
Thesis: Mars Sample Return Mission Project<br />
Advisor: Prof. G. D. Walberg<br />
Professional Appointments<br />
2010-Present Associate Professor<br />
Department of Mechanical Engineering, <strong>Temple</strong> <strong>University</strong><br />
2004-2010 Assistant Professor<br />
Department of Mechanical Engineering, <strong>Temple</strong> <strong>University</strong><br />
2005-Present Research Scientific Staff<br />
Shriners Hospital for Children, Philadelphia, Pennsylvania<br />
Journal Articles Published, In Press, or In Review<br />
*undergraduate, **graduate, ***postdoctoral fellow<br />
1. N. V. Datla***, J. Koo**, D. Choi**, B. Kohn**, T. M. Nguyen**, T. K. Podder, K. Darvish, A.<br />
Dicker, Y. Yu, P. <strong>Hutapea</strong>. Polyacrylamide Phantom for Needle-Tissue Interaction Studies with<br />
Active Needles: Medical Physics, in review, <strong>2012</strong>.<br />
2. G. Diloyan**, M. Sobel, K. Das, P. <strong>Hutapea</strong>, Effect of Mechanical Vibrations on Platinum Growth<br />
in PEM Fuel Cells: Journal of Power Sources, 214, pp. 59-67, <strong>2012</strong>.<br />
3. G. Diloyan**, L. Breziner**, P. <strong>Hutapea</strong>. Development of a PEM Fuel Cell Powered Scooter:<br />
ASME Journal of Fuel Cell Science and Technology, 9(3), 034502, <strong>2012</strong>.<br />
4. P. Strahs*, J. Weaver*, L. C. Breziner**, C. Garant*, K. Shaffer*, G. Diloyan**, P. <strong>Hutapea</strong>.<br />
Development of a Hybrid PEM Fuel Cell Vehicle: Journal of Renewable and Sustainable Energy,<br />
4, 033107, <strong>2012</strong>.<br />
5. T. K. Podder, A. P. Dicker, Y. Yu, K. Darvish, P. <strong>Hutapea</strong>, A Novel Curvilinear Approach for<br />
Prostate Seed Implant: Medical Physics, 39(4), pp. 1887-1892, <strong>2012</strong>.<br />
<strong>Hutapea</strong> - 1
6. M. Sobel, K. Das, G. Diloyan**, P. <strong>Hutapea</strong>, A Semi-parametric Bayesian Model for Predicting<br />
Platinum Particle Growth in Fuel Cells: American Statistician, in press, <strong>2012</strong>.<br />
7. N. V. Datla***, J. Koo**, D. Choi**, B. Kohn**, M. Honarvar**, T. M. Nguyen**, T.K. Podder, Y.<br />
Yu, A. P. Dicker, K. Darvish, P. <strong>Hutapea</strong>. Polyacrylamide Phantom for Needle-Tissue Interaction<br />
Studies with Active Needles: Medical Physics, in review, <strong>2012</strong>.<br />
8. W. S. Slovinsky**, P. <strong>Hutapea</strong>. Influence of Bolting Parameters on the Failure Mechanisms of<br />
Fiber-reinforced Composite-Metal Joints: Mechanics Based Design of Structures and Machines,<br />
38(2), pp. 261-271, 2010.<br />
9. K. Jacobs*, M. Harper*, E. Meyer*, B. Roth*, P. <strong>Hutapea</strong>. Development of a Proof-of-Concept<br />
Aircraft Smart Control System: Aeronautical Journal (The Royal Aeronautical Society),<br />
113(1147), pp. 587-590, 2009.<br />
10. Y. Luo**, P. <strong>Hutapea</strong>. Design of Bone Transport Devices using Smart Material Actuators: ASME<br />
Journal of Mechanical Design, 131(9), September 2009.<br />
11. L. C. Breziner**, P. <strong>Hutapea</strong>. Influence of Harsh Environmental Conditions on the Failure<br />
Mechanisms of Carbon Fiber-reinforced Composite-Metal Joints: Aircraft Engineering and<br />
Aerospace Technology, 80(4), pp. 371 - 377, 2008.<br />
12. P. <strong>Hutapea</strong>, J. Kim*, A. Guion*, C. Hanna*, N. Heulitt*. Development of a Smart Wing: Aircraft<br />
Engineering and Aerospace Technology, 80(4), pp. 439-444, 2008.<br />
13. Y. Luo**, P. <strong>Hutapea</strong>. Stress-Strain Behavior of a Smart Magnetostrictive Actuator for a Bone<br />
Transport Device: ASME Journal Medical Devices, 2(4), 2008.<br />
14. M. Smith**, P. <strong>Hutapea</strong>. Optimizing Adhesively Bonded Metal-Composite Hybrid Joints: Journal<br />
of Ship Production, 23(2), pp. 72-81, 2007.<br />
15. P. <strong>Hutapea</strong>, J. L. Grenestedt. Modifying Electric Artworks to Improve Dimensional Stability of<br />
Microelectronic Substrates: Microelectronics International, 24(1), pp. 15-22, 2007.<br />
16. P. <strong>Hutapea</strong>, J. L. Grenestedt, M. Modi, M. Mello, K. Frutschy. Prediction of Microelectronic<br />
Substrate Warpage Using Homogenized Finite Element Models: Intel Technology Journal, 10 (2)<br />
(invited), 2006.<br />
17. P. <strong>Hutapea</strong>, J. L. Grenestedt, M. Modi, M. Mello, K. Frutschy. Prediction of Microelectronic<br />
Substrate Warpage Using Homogenized Finite Element Models: Microelectronic Engineering,<br />
83(3), pp. 557 – 569, 2006.<br />
18. W. J. Shakespeare, R. A. Pearson, J. L. Grenestedt, P. <strong>Hutapea</strong>, V. Gupta. MEMS Integrated<br />
Submount Alignment for Optoelectronics: Journal of Lightwave Technology, 23(2), pp. 504-509,<br />
2005.<br />
19. P. <strong>Hutapea</strong>, J. L. Grenestedt. Reducing Warpage of Printed Circuit Boards using Wavy Traces:<br />
Journal of Electronic Packaging, 126(3), pp. 282 - 287, 2004.<br />
20. P. <strong>Hutapea</strong>, F. G. Yuan, N. J. Pagano. Microstress Prediction in Composite Laminates with High<br />
Stress Gradients: International Journal of Solids and Structures: 40(9), pp. 2215-2248, 2003.<br />
21. J. L. Grenestedt, P. <strong>Hutapea</strong>. Influence of Electric Artwork on Thermomechanical Properties and<br />
Warpage of Printed Circuit Boards: Journal of Applied Physics: 94(1), pp. 686-696, 2003.<br />
22. P. <strong>Hutapea</strong>, J. L. Grenestedt. Effect of Temperature on Elastic Properties of Woven<br />
Glass/Epoxy Substrates for Printed Circuit Board Applications: Journal of Electronic Materials,<br />
32(4), pp. 221-227, 2003.<br />
23. J. L. Grenestedt, P. <strong>Hutapea</strong>. Using Waviness to Reduce Thermal Warpage in Printed Circuit<br />
Boards: Applied Physics Letters, 81(21), pp. 4079-4081, 2002.<br />
<strong>Hutapea</strong> - 2
24. P. <strong>Hutapea</strong>, P. Qiao. Determination of Micropolar In-plane Shear and Rotation Moduli of<br />
Unidirectional Fiber Composites with Fiber-Matrix Interfacial Debonding: Journal of Composite<br />
Materials, 36(11), pp. 1381-1400, 2002.<br />
25. P. <strong>Hutapea</strong>, F. G. Yuan. The Effect of Thermal Aging on the Mode-I Interlaminar Fracture<br />
Behavior of High-Temperature IM7/LaRC-RP46 Composites: Composites Science and<br />
Technology, 59, pp. 1271-1286, 1999.<br />
Refereed Conference Proceedings<br />
*undergraduate, **graduate, ***postdoctoral fellow<br />
1. N. V. Datla, M. Honarvar, T. M. Nguyen, B. Konh, T. K. Podder, K. Darvish, A. Dicker, Y. Yu, P.<br />
<strong>Hutapea</strong>. Towards a Nitinol Actuator for an Active Surgical Needle: ASME <strong>2012</strong> Conference on<br />
Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Stone Mountain, GA,<br />
September 19 – 21, <strong>2012</strong>.<br />
2. G. Diloyan**, P. <strong>Hutapea</strong>. Platinum Particle Agglomeration and Growth in PEM Fuel Cells due to<br />
Mechanical Vibrations: Proceedings of ASME <strong>2012</strong> 6 th International Conference on Energy<br />
Sustainability & 10 th Fuel Cell Science, Engineering and Technology Conference, San Diego,<br />
CA, July 23 - 26, <strong>2012</strong>.<br />
3. Brian Ruiz**, P. <strong>Hutapea</strong>, K. Darvish, A. Dicker, Y. Yu, T. K. Podder. SMA Actuated Flexible<br />
Needle Control using EM Sensor Feedback for Prostate Brachytherapy: IEEE International<br />
Conference on Robotic and Automation (ICRA) <strong>2012</strong> Needle Steering Workshop, St. Paul,<br />
Minnesota, May 18, <strong>2012</strong>.<br />
4. N. V. Datla***, M. Honarvar**, T. M. Nguyen**, T. K. Podder, Y. Yu, A. P. Dicker, K. Darvish, P.<br />
<strong>Hutapea</strong>. Thermomechanical Behavior of a Smart Actuator for an Active Surgical Needle: <strong>2012</strong><br />
ASME Design of Medical Device Conference, Minneapolis, MN, April 10-12, <strong>2012</strong>.<br />
5. N. V. Datla***, J. Koo**, D. Choi**, S. Assari**, A. Hemmasizadeh**, T.K. Podder, Y. Yu, A. P.<br />
Dicker, K. Darvish, P. <strong>Hutapea</strong>. Mechanical Characterization of Prostate Tissue-Mimicking<br />
Phantoms for the Development of an Active Surgical Needle: <strong>2012</strong> ASME Design of Medical<br />
Device Conference, Minneapolis, MN, April 10-12, <strong>2012</strong>.<br />
6. G. Diloyan**, P. <strong>Hutapea</strong>. Platinum Dissolution in Polymer Electrolyte Membrane Fuel Cell<br />
Under Mechanical Vibrations: Proceedings of ASME 2011 5th International Conference on<br />
Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference,<br />
Washington, DC, <strong>August</strong> 7-10, 2011.<br />
7. P. <strong>Hutapea</strong>, T. K. Podder, K. Darvish. Smart Needling System for Fully Conformal Radiation<br />
Dose Delivery in Treating Prostate Cancer: 2011 ASME Summer Bioengineering Conference,<br />
Farmington, Pennsylvania, June 22 – 25, 2011.<br />
8. G. Diloyan**, P. <strong>Hutapea</strong>. PEM Fuel Cell Loses due to Vibration: 6 th Fuel Cells Durability &<br />
Performance, Knowledge Foundation, December 9-10, 2010 - Boston, MA.<br />
9. P. <strong>Hutapea</strong>, T. K. Podder, K. Darvish, A. Dicker, Y. Yu. Smart needling system for fully<br />
conformal radiation dose delivery in treating prostate cancer: ASME 2010 Conference on Smart<br />
Materials, Adaptive Structures and Intelligent Systems (SMASIS), Philadelphia, PA, September<br />
28 – October 1, 2010.<br />
10. L. C. Breziner**, P. Strahs*, J. Weaver*, C. Garrant*, K. Shaffer, G. Diloyan**, P. <strong>Hutapea</strong>.<br />
Development of a Hybrid PEM Fuel Cell Vehicle: ASME 8 th Annual Fuel Cell Science,<br />
Engineering & Technology Conference, Brooklyn, New York, June 14-16, 2010.<br />
11. L. C. Breziner**, P. Strahs*, P. <strong>Hutapea</strong>. Influence of Vibration on the Water Transport of PEM<br />
Fuel Cells: ASME International Mechanical Engineering Congress and Exposition, Lake Buena<br />
Vista, Florida, November 13-19, 2009.<br />
<strong>Hutapea</strong> - 3
12. P. <strong>Hutapea</strong>. Development of a Proof-of-Concept Smart Airplane Control System: ASME<br />
SMASIS, Oxnard, CA, September 20-24, 2009.<br />
13. L. C. Breziner**, P. Strahs*, P. <strong>Hutapea</strong>. Influence of Vibration on the Water Transport of PEM<br />
Fuel Cells: ASME 7 th Annual Fuel Cell Science, Engineering & Technology Conference, Newport<br />
Beach, California, June 8-10, 2009.<br />
14. P. <strong>Hutapea</strong>. Magnetostrictive Actuator for a Bone Transport Device: ASME SMASIS, Ellicott<br />
City, MD, October 28-30, 2008.<br />
15. L. C. Breziner**, P. <strong>Hutapea</strong>. Development of a PEM Fuel Cell Scooter: ASME 6 th Annual Fuel<br />
Cell Science, Engineering & Technology Conference, Denver, Colorado, June 16-18, 2008.<br />
16. R. M. Brooks, P. <strong>Hutapea</strong>, I. Obeid, L. Bai, K. V. Takkalapelli. Finite Element Method - a Tool for<br />
Learning Runway Design: ASEE Mid-Atlantic (Zone I) Conference, West Point, NY, March 28 –<br />
29, 2008.<br />
17. W. S. Slovinsky**, P. <strong>Hutapea</strong>. The Influence of Bolting Parameters on the Failure Mechanisms<br />
of Fiber-reinforced Composite-Metal Joints: Cancom 2007, Winnipeg, Manitoba, Canada, <strong>August</strong><br />
15 - 17, 2007.<br />
18. L. C. Breziner**, P. <strong>Hutapea</strong>. The Influence of Harsh Environmental Conditions on the Failure<br />
Mechanisms of Carbon Fiber-reinforced Composite-Metal Joints: 18 th ASCE Engineering<br />
Mechanics Conference, Virginia Tech, Blacksburg, Virginia, June 3 - 6, 2007.<br />
19. W. S. Slovinsky**, P. <strong>Hutapea</strong>. The Influence of Bolting Parameters on the Failure Mechanisms<br />
of Fiber-reinforced Composite-Metal Joints: 18 th ASCE Engineering Mechanics Conference,<br />
Virginia Tech, Blacksburg, Virginia, June 3 - 6, 2007.<br />
20. Y. Luo**, P. <strong>Hutapea</strong>. Development of a Bone Lengthening Device for Children: 18 th ASCE<br />
Engineering Mechanics Conference, Virginia Tech, Blacksburg, Virginia, June 3 - 6, 2007.<br />
21. P. <strong>Hutapea</strong>. Improving the Dimensional Stability of Electronic Substrates Influenced by<br />
Temperature and Moisture: Proceedings of IMECE, ASME International Mechanical Engineering<br />
Congress and Exposition, Orlando, Florida USA, November 5-11, 2005.<br />
22. B. Bogicevic**, P. <strong>Hutapea</strong>. Reliability of SMT Packages due to Harsh Conditions: IMAPS 2005:<br />
International Microelectronics and Packaging Society, Philadelphia, Pennsylvania, September<br />
25-29, 2005.<br />
23. P. <strong>Hutapea</strong>, J. L. Grenestedt, M. Modi, K. Frutschy, M. Mello. Prediction of CPU Substrate<br />
Warpage Using Homogenized Thermomechanical Finite Element Models: ASME Interpack05,<br />
San Francisco, California, July 17-22, 2005.<br />
24. A. Shugar, M. Notis, L. Limata, D. N. Wong, P. <strong>Hutapea</strong>, H. Rubin. Early Chinese Scissors and<br />
Shears: Category, Design and Shape: A Metallurgical Study: 34 th International Symposium on<br />
Archaeometry, 3-7 May 2004, Zaragoza, Spain.<br />
25. P. <strong>Hutapea</strong>, J. L. Grenestedt. Tuning Electric Artworks of Printed Circuit Boards to Reduce<br />
Warpage: 9 th International Symposium and Exhibition on Advanced Packaging Materials, IEEE<br />
CPMT, Atlanta, Georgia, March 24 - 26 2004. BEST PAPER AWARD<br />
26. J. L. Grenestedt, P. <strong>Hutapea</strong>, K. Frutschy. Prediction of CPU Substrate Warpage using a<br />
Combined Homogenization and Finite Element Method. Mechanics and Materials Conference,<br />
Scottsdale, Arizona, June 17 - 20, 2003.<br />
27. P. <strong>Hutapea</strong>, F. G. Yuan, N. J. Pagano. Microstress Prediction in Composite Laminates with High<br />
Stress Gradients: Proceedings of the American Society for Composites (ASC) 17 th Technical<br />
Conference, West Lafayette, Indiana, October 2002.<br />
<strong>Hutapea</strong> - 4
28. P. <strong>Hutapea</strong>, F. G. Yuan. Mode-I Fracture Toughness of IM7/LaRC-RP46 Composites Under<br />
Thermal Aging: 39 th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials<br />
Conference, Long Beach, California, 1998.<br />
29. P. <strong>Hutapea</strong>, J. Wang, P. Graham, E. Setiawan, G. K. Lee. A Teleoperated Mobile Robocrane:<br />
Testbed For Control Algorithm Verification: International Society for Computers and Applications<br />
(ISCA) 11 th International Conference, San Francisco, California, 1996.<br />
30. J. Wang, P. Graham, P. <strong>Hutapea</strong>, E. Setiawan, G. K. Lee. A Mobile Manipulator System Using<br />
the Robocrane: International Society for Computers and Applications (ISCA) 10th International<br />
Conference, pp. 298-302, Indianapolis, Indiana, 1995.<br />
Abstracts or Presentations<br />
*undergraduate, **graduate, ***postdoctoral fellow<br />
1. M. Honarvar**, T. M. Nguyen**, J. Koo**, D. Choi**, B. Konh**, N. V. Datla***, P. <strong>Hutapea</strong>. Smart<br />
Needle for Prostate Brachyteraphy: 6 th College of Engineering Research Poster Competition,<br />
<strong>Temple</strong> <strong>University</strong>, February <strong>2012</strong>. BEST POSTER (2 ND PLACE)<br />
2. G. Diloyan**, P. <strong>Hutapea</strong>. Platinum Dissolution in PEM Fuel Cell Under Mechanical Vibrations:<br />
6 th College of Engineering Research Poster Competition, <strong>Temple</strong> <strong>University</strong>, February <strong>2012</strong>.<br />
3. B. Dallas**, P. <strong>Hutapea</strong>. Mechanics of PEM Fuel Cell Stack Compression, ASEE Middle Atlantic<br />
Conference, <strong>Temple</strong> <strong>University</strong>, Philadelphia, PA, October 28 – 29, 2011.<br />
4. T. M. Nguyen**, P. <strong>Hutapea</strong>. Study of Mechanical Behavior of Shape Memory Alloy for Smart<br />
Needling System: 5 th College of Engineering Research Poster Competition, <strong>Temple</strong> <strong>University</strong>,<br />
March 2011.<br />
5. G. Diloyan**, P. <strong>Hutapea</strong>. Platinum Dissolution in PEM Fuel Cell Under Mechanical Vibrations:<br />
5 th College of Engineering Research Poster Competition, <strong>Temple</strong> <strong>University</strong>, March 2011.<br />
6. P. <strong>Hutapea</strong>. Development of a Hybrid PEM Fuel Cell Vehicle: 2010 World Green Energy<br />
Symposium, Philadelphia, PA, October 21 – 23, 2010.<br />
7. P. <strong>Hutapea</strong>, PEM Fuel Cell Losses under Vibrations: 2010 Fuel Cells Gordon Research<br />
Conference, Bryant <strong>University</strong>, Smithfield, RI, <strong>August</strong> 1 – 6, 2010.<br />
8. L. C. Breziner**, P. <strong>Hutapea</strong>, Influence of Vibration on Water Transport of PEM Fuel Cells:<br />
AIAA/ASME 4 th Annual Aerospace/Mechanical Engineering Mini-Symposium, Philadelphia,<br />
Pennsylvania, 2008.<br />
9. K. Davis*, P. <strong>Hutapea</strong>. Development of an Actuator for a Bone Lengthening Device for Children:<br />
Undergraduate Research Presentation at The Capitol, Harrisburg, PA, January 28, 2008.<br />
10. P. <strong>Hutapea</strong>, J. Kim*, A. Guion*, C. Hanna*, N. Heulitt*. Development of Smart Wing:<br />
AIAA/ASME 3 rd Annual Aerospace/Mechanical Engineering Mini-Symposium, Philadelphia,<br />
Pennsylvania, 2007.<br />
11. W. S. Slovinsky**, P. <strong>Hutapea</strong>. The Influence of Bolting Parameters on the Failure Mechanisms<br />
of Fiber-reinforced Composite-Metal Joints: AIAA/ASME 3 rd Annual Aerospace/Mechanical<br />
Engineering Mini-Symposium, Philadelphia, Pennsylvania, 2007.<br />
12. L. C. Breziner**, P. <strong>Hutapea</strong>. The Influence of Harsh Environmental Conditions on the Failure<br />
Mechanisms of Carbon Fiber-reinforced Composite-Metal Joints: AIAA/ASME 3 rd Annual<br />
Aerospace/Mechanical Engineering Mini-Symposium, Philadelphia, Pennsylvania, 2007.<br />
13. Y. Luo**, P. <strong>Hutapea</strong>. Development of a Bone Transport Device: AIAA/ASME 3 rd Annual<br />
Aerospace/Mechanical Engineering Mini-Symposium, 2007.<br />
14. M. Smith**, P. <strong>Hutapea</strong>. Optimizing Adhesively Bonded Metal-Composite Hybrid Joints:<br />
AIAA/ASME 2 nd Annual Aerospace/Mechanical Engineering Mini-Symposium, 2006.<br />
<strong>Hutapea</strong> - 5
15. M. El-Mougharbel*, P. <strong>Hutapea</strong>. Reducing Anisotropy to Improve the Dimensional Stability of<br />
Composite Laminates: AIAA/ASME 2 nd Annual Aerospace/Mechanical Engineering Mini-<br />
Symposium, 2006.<br />
16. P. <strong>Hutapea</strong>, B. Bogicevic**. Reliability of Surface Mount Technology Packages: AIAA/ASME 2 nd<br />
Annual Aerospace/Mechanical Engineering Mini-Symposium, 2006.<br />
17. W. J. Shakespeare, R. A. Pearson, J. L. Grenestedt, P. <strong>Hutapea</strong>, V. Gupta. MEMS Integrated<br />
Submount Alignment for Optoelectronics: International Microelectronics and Packaging Society<br />
(IMAPS) Optoelectronics Device Packaging Topical Workshop and Exhibition, Bethlehem,<br />
Pennsylvania, October 11-14, 2004.<br />
18. J. L. Grenestedt, P. <strong>Hutapea</strong>. Optimization Techniques for Reducing Warpage of Unpopulated<br />
Organic Substrates: International Microelectronics and Packaging Society (IMAPS)<br />
Optoelectronics Device Packaging Topical Workshop and Exhibition, Bethlehem, Pennsylvania,<br />
October 11-14, 2004.<br />
19. W. J. Shakespeare, R. A. Pearson, J. L. Grenestedt, P. <strong>Hutapea</strong>, V. Gupta. MEMS Integrated<br />
Submount Alignment for Optoelectronics: Lehigh <strong>University</strong> Center for Optical Technologies<br />
Spring Symposium: Bethlehem, Pennsylvania, November 10, 2003.<br />
20. J. L. Grenestedt, P. <strong>Hutapea</strong>. Dimensional Stability of Optoelectronic Packages: Lehigh<br />
<strong>University</strong> Center for Optical Technologies Fall Symposium: Bethlehem, Pennsylvania,<br />
November 10, 2003.<br />
21. J. L. Grenestedt, P. <strong>Hutapea</strong>. Tuning Organic Substrates for Improving Reliability: International<br />
Microelectronics and Packaging Society (IMAPS) Conference on Optoelectronics Packaging and<br />
Micro-Optoelectromechanical Systems (MOEMS), Northampton County Community College,<br />
Allentown, Pennsylvania, June 5, 2003. BEST PRESENTATION AWARD<br />
22. P. <strong>Hutapea</strong>, J. L. Grenestedt. Warpage of Printed Circuit Boards: International Microelectronics<br />
and Packaging Society (IMAPS) Conference on Optoelectronics Packaging and Micro-<br />
Optoelectromechanical Systems (MOEMS), Bethlehem, Pennsylvania, October 21-23, 2002.<br />
23. P. <strong>Hutapea</strong>, J. Wang, P. Graham, E. Setiawan. A Teleoperated Mobile Robocrane: Testbed For<br />
Control Algorithm Verification: International Society for Computers and Applications (ISCA) 11th<br />
International Conference, pp. 7-10, San Francisco, California, 1996.<br />
24. J. Wang, P. Graham, P. <strong>Hutapea</strong>, E. Setiawan, G. K. Lee. A Mobile Manipulator System Using<br />
the Robocrane: International Society for Computers and Applications (ISCA) 10th International<br />
Conference, pp. 298-302, Indianapolis, Indiana, 1995.<br />
25. P. <strong>Hutapea</strong>, P. Graham, E. Setiawan, J. Wang. A Mobile Manipulator System using the<br />
Robocrane: A Testbed for Control Algorithm and System Integration Studies: AIAA Southeastern<br />
Regional Student Conference, Atlanta, Georgia, 1995.<br />
Grants Awarded<br />
1. P. <strong>Hutapea</strong> (PI), X. Xi, S. Neretina, N. Davatzes: DURIP: Acquisition of SEM for Multidisciplinary<br />
Research. DOD Office of Naval Research ($475,000), 06/12 – 05/13.<br />
2. P. <strong>Hutapea</strong> (PI), T. Podder, A. Dicker: Development of a Smart Needling Device for Image-<br />
Guided Percutaneous Intervention and Delivery of Therapeutic Agents in Prostate. DOD CDMRP<br />
Prostate Cancer Research Program ($1,128,024), 05/11 – 04/14.<br />
3. S. Neretina (PI), P. <strong>Hutapea</strong>, M. Kiani, R. Suri, Z. J. Delalic: NUE: A Sustainable Urban<br />
Environment Advanced by Engineers Empowered with Nanotechnology. NSF ($199,967), 09/10<br />
– 08/12.<br />
<strong>Hutapea</strong> - 6
4. D. Strongin (PI), P. <strong>Hutapea</strong>, L. C. Knight, B. Wayland, E. Borguet: MRI: Acquisition of a TEM<br />
for Multidisciplinary Research at <strong>Temple</strong> <strong>University</strong>. NSF ($644,000: $431,480 plus $212,520<br />
match), 07/09.<br />
5. P. <strong>Hutapea</strong> (PI): Development of a Hybrid PEM Vehicle. PA Department of Environmental<br />
Protection AFIG ($255,443 plus $250,000 match from Industry and <strong>Temple</strong>), 08/09 – 06/10.<br />
6. P. <strong>Hutapea</strong> (PI): PEM Fuel Cell Equipment for Development of a Hybrid PEM Vehicle. Relion Inc<br />
Spokane, Washington ($13,500), 06/09.<br />
7. P. <strong>Hutapea</strong> (PI): Smart Nano Pipet for a Novel 2-D Membrane Electrophoresis (Phase II). The<br />
Nanotechnology Institute ($50,000), 02/09 – 12/09.<br />
8. P. <strong>Hutapea</strong> (PI): Smart Aviation. Wolf Aviation Fund ($2,000), 06/08 – 09/08.<br />
9. P. <strong>Hutapea</strong> (PI): Smart Nano Pipet for a Novel 2-D Membrane Electrophoresis (Phase I). The<br />
Nanotechnology Institute ($50,000), 04/08 – 09/08.<br />
10. P. <strong>Hutapea</strong> (PI), F. N. Chang: Smart Nano Pipet for a Novel 2-D Membrane Electrophoresis.<br />
The Office of Provost Multidisciplinary Seed Grant ($25,000), 05/08 – 07/09.<br />
11. P. <strong>Hutapea</strong> (PI): Smart Wearable Device for Dropped Foot Condition. The McDonnell<br />
Foundation ($22,000), 01/08 – 12/08.<br />
12. P. <strong>Hutapea</strong> (PI): Magnetostrictive Actuator for a Smart Bone Transport Device. The Scholler<br />
Foundation ($24,985), 06/07 – 06/08.<br />
13. P. <strong>Hutapea</strong> (PI): Influence of Vibration on PEM Fuel Cells. The Office of Vice President<br />
Research Grant ($50,000), 06/07 – 06/08.<br />
14. P. <strong>Hutapea</strong> (PI): Magnetostrictive Actuator for a Smart Bone Transport Device. The<br />
Pennsylvania Department of Health ($30,000), 01/07 – 06/08.<br />
15. J. Chen (PI), P. <strong>Hutapea</strong>: Robert M. and Mary Haythornthwaite Distinguished Lecture Series.<br />
Robert and M. Mary Haythornthwaite Foundation ($10,000), 01/06 – 05/07.<br />
16. P. <strong>Hutapea</strong> (PI): Magnetostrictive Actuator for a Smart Bone Transport Device. Philadelphia<br />
Shriners Hospital ($3,000), 06/05 – 07/05.<br />
Invited Talks or Meetings<br />
1. Review Panelist for the American Heart Association (AHA) Grant Program, 2011.<br />
2. Keynote Speaker for the 2010 World Green Energy Symposium, October 21 – 23, 2010.<br />
3. Poster presenter at the 2010 Fuel Cells Gordon Research Conference, Bryant <strong>University</strong>,<br />
Smithfield, RI, <strong>August</strong> 1 – 6, 2010.<br />
4. Review Panelist for the DOE Advanced Research Projects Agency – Energy (ARPA-E) Grant<br />
Program, 2009.<br />
5. Review Panelist for the DOE Smart Grid Grant Program (Office of Electricity Delivery and Energy<br />
Reliability), 2009.<br />
6. Review Panelist for the NSF SBIR/STTR Phase I BCT: Biomedical Devices Panel, Washington,<br />
DC, <strong>August</strong> 19, 2009.<br />
7. Smart Nano Pipet: The Nanotechnology Institute, September 18, 2008.<br />
8. Finalist (one of four teams in a nation-wide competition). The National Collegiate Inventors<br />
Competition, Caltech, Pasadena, California, October 31-November 1, 2007.<br />
9. Ohio Fuel Cell Symposium, Kent State Stark Professional Education and Conference Center in<br />
Canton, Ohio, May 23 - 24, 2006.<br />
<strong>Hutapea</strong> - 7
10. <strong>Temple</strong> <strong>University</strong> Undergraduate Research Forum & Creative Works Symposium, April 5, 2007.<br />
11. AIAA, Careers in Aerospace: A Panel Discussion of Opportunities in the Aerospace Industry,<br />
Philadelphia, Pennsylvania, April, 2006.<br />
12. <strong>Temple</strong> <strong>University</strong> Undergraduate Research Forum & Creative Works Symposium, April 5, 2006.<br />
13. Honda Grant Symposium: Performance and Durability of Hybrid Joints for Automotive<br />
Applications, Chicago, Illinois, November 16, 2005<br />
14. Workshop on Wireless Sensor Networks, North Carolina State <strong>University</strong>, June 7, 2005.<br />
15. The 2005 NSF Career Workshop, Columbia <strong>University</strong>, New York, New York, May 24, 2005.<br />
16. Shriners Children Hospital Research Staff Conference, Philadelphia, Pennsylvania, April, 2005.<br />
17. The <strong>University</strong> of Akron College of Engineering Seminar Series: Reducing Microelectronic<br />
Substrate Warpage, Akron, Ohio, December 8, 2004.<br />
18. Intel Corporation: CPU Substrate Warpage Project, Chandler, Arizona, December 6, 2004.<br />
19. Lehigh <strong>University</strong> College of Engineering Seminar Series: Dimensional Stability of Electronic<br />
Substrate, Bethlehem, Pennsylvania, December 3, 2004.<br />
20. Lehigh <strong>University</strong> and Semiconductor Research Corporation (SRC) Workshop: Dimensional<br />
Stability of Electronic Substrates, July 13 - July 14, 2004.<br />
21. Visteon Corporation: Reducing Warpage in Printed Circuit Boards, Dearborn, Michigan, May 13,<br />
2003.<br />
22. Visteon Corporation: Dimensional Stability of Organic Substrates, Lansdale, Pennsylvania, May<br />
2003.<br />
23. Intel Corporation: Prediction of CPU Substrate Warpage using a Combined Homogenization and<br />
Finite Element Method, Chandler, Arizona, March 3, 2003.<br />
24. Lehigh <strong>University</strong>: Dimensional Stability in Microelectronics and Optoelectronic Packages:<br />
Lehigh Center of Optical Technology Industry-<strong>University</strong> Seminar, Lehigh <strong>University</strong>, Bethlehem,<br />
Pennsylvania, January 17, 2003.<br />
25. Visteon Corporation: Wavy Electric Artworks of Printed Circuit Boards, Lansdale, Pennsylvania,<br />
May 2002.<br />
26. Visteon Corporation: Influence of Supports and Surrounding Air on the Vibration of Plates,<br />
Lansdale, Pennsylvania, May 2001.<br />
Technical or Grant Progress Reports<br />
1. P. <strong>Hutapea</strong>. Development of a Smart Needling Device for Image-Guided Percutaneous<br />
Intervention and Delivery of Therapeutic Agents in Prostate. DOD CDMRP Prostate Cancer<br />
Research Program, May <strong>2012</strong>.<br />
2. S. Neretina (PI), P. <strong>Hutapea</strong>, M. Kiani, R. Suri, Z. J. Delalic: NUE: A Sustainable Urban<br />
Environment Advanced by Engineers Empowered with Nanotechnology. NSF, 09/10 – 08/12.<br />
3. D. Strongin (PI), P. <strong>Hutapea</strong>, L. C. Knight, B. Wayland, E. Borguet: MRI: Acquisition of a TEM for<br />
Multidisciplinary Research at <strong>Temple</strong> <strong>University</strong>, 07/09 – 6/12.<br />
4. P. <strong>Hutapea</strong>. Development of Smart Bone Transport Device: Pennsylvania Department of Health<br />
Formula Fund, June 2009.<br />
5. P. <strong>Hutapea</strong>. Smart Nano Pipet: The Nanotechnology Institute, July 2009.<br />
6. P. <strong>Hutapea</strong>. Development of Smart Bone Transport Device: Pennsylvania Department of Health<br />
Formula Fund, June 2009.<br />
<strong>Hutapea</strong> - 8
7. P. <strong>Hutapea</strong>. Smart Nano Pipet: The Nanotechnology Institute, September 2008.<br />
8. P. <strong>Hutapea</strong>. Development of Smart Wearable Device: McDonnell Foundation, May 2008.<br />
9. P. <strong>Hutapea</strong>. Development of Smart Bone Transport Device: Pennsylvania Department of Health<br />
Formula Fund, March 2007.<br />
10. P. <strong>Hutapea</strong>, J. L. Grenestedt. Substrate Warpage Project: Intel Corporation Assembly<br />
Technology Division, December 2004.<br />
11. P. <strong>Hutapea</strong>, J. L. Grenestedt. Thermoelastic Effective Properties of Intel Substrate Features:<br />
Lehigh <strong>University</strong> Technical Report for Intel Corporation, February 2004.<br />
12. P. <strong>Hutapea</strong>, J. L. Grenestedt. Dimensional Stability of Organic Substrates: Lehigh <strong>University</strong><br />
Technical Report for Visteon Corporation, June 2003.<br />
13. F. G. Yuan, P. <strong>Hutapea</strong>. Micromechanics Failure of Fiber Reinforced Composite Laminates:<br />
North Carolina State <strong>University</strong> Technical Report for Air Force Office of Scientific Research,<br />
Dayton, Ohio, 2001.<br />
14. F. G. Yuan, P. <strong>Hutapea</strong>. Fracture behavior of High-Temperature IM7/LaRC-RP46 Composites:<br />
North Carolina State <strong>University</strong> Technical Report for NASA Langley, Virginia, 1997.<br />
Patents, Provisional Patents, or Invention Disclosure Submitted<br />
*undergraduate, **graduate, ***postdoctoral fellow<br />
1. P. <strong>Hutapea</strong>, N. V. Datla***, K. Darvish, T. K. Podder. Smart Needling System for Fully Conformal<br />
Radiation Dose Delivery in Treating Prostate Cancer, Invention Disclosure, 2007.<br />
2. P. <strong>Hutapea</strong>, Y. Luo**. Design of a Bone Lengthening Device using Magnetostrictive Alloy,<br />
Invention Disclosure, 2007.<br />
3. P. <strong>Hutapea</strong>, J. Kim*, A. Guion*, C. Hanna*, N. Heulitt*. Smart Aviation, Invention Disclosure,<br />
2007.<br />
4. W. J. Shakespeare, R. A. Pearson, J. L. Grenestedt, P. <strong>Hutapea</strong>, V. Gupta. MEMS Integrated<br />
Submount Alignment for Optoelectronics, Invention Disclosure, 2004.<br />
Newspapers or Online Publication Articles<br />
1. Featured in Mishimoto Radiators, http://blog.mishimoto.com/. <strong>Temple</strong> Students Keep Senior<br />
Project Cool with Mishimoto, December, 2011.<br />
2. Gatra (Indonesian Weekly Magazine). Banjir Order di Negeri Paman Sam, January 25, <strong>2012</strong>.<br />
3. Featured in CBS3 TV Philadelphia, February 2011.<br />
4. The <strong>Temple</strong> News. Hybrid Hype, September 22, 2009.<br />
5. <strong>Temple</strong> Times. Students Engineers High-Tech Scooter, April 17, 2008.<br />
6. Phyorg.com. Engineering Students Use Smart Materials to Design a Smart Wing, November 16,<br />
2007.<br />
7. <strong>Temple</strong> Times. Students Take New Path to Flying with Lighter, Quiter ʻSmart Wingʼ, November<br />
15, 2007.<br />
8. Philadelphia Inquirer. <strong>Temple</strong> Students Design a Lighter Aircraft Lift System, October 8, 2007.<br />
<strong>Hutapea</strong> - 9
Awards and Memberships<br />
1. Best Poster Award (2 nd Place): Smart Needle for Prostate Brachyteraphy: 6 th College of<br />
Engineering Research Poster Competition, <strong>Temple</strong> <strong>University</strong>, February <strong>2012</strong>.<br />
2. Best Senior Design Project in Department of Mechanical Engineering (Ridenour Prize): Hybrid<br />
Electric Fuel Cell Vehicle, 2010.<br />
3. Finalist in the prestigious National Collegiate Inventors Competition, 2007.<br />
4. Best Senior Design Project in Department of Mechanical Engineering (Ridenour Prize): Smart<br />
Wing, Ridenour Prize, 2007.<br />
5. Best Paper Award in the 9 th IEEE/CPMT Conference, Atlanta, Georgia, 2004.<br />
6. Best Presentation Award in the IMAPS Conference on Optoelectronics Packaging and Micro-<br />
Optoelectromechanical Systems (MOEMS), Northampton County Community College,<br />
Allentown, Pennsylvania, June 5, 2003<br />
7. Air Force Office of Scientific Research graduate student assistantship, 1997-2000<br />
8. NASA graduate student assistantship, 1995-1997<br />
9. Certificate of Teaching Workshop from Southeastern <strong>University</strong> and College Coalition for<br />
Engineering Education, 1998<br />
10. Inducted to the Sigma Gamma Tau Aerospace and Astronautics Honor Society, 1995<br />
11. Inducted to the Tau Beta Pi Engineering Honor Society, 1994<br />
12. Inducted to the Pi Mu Epsilon Mathematics Honor Society, 1994<br />
13. Recipient of World Bank College Scholarship, 1991-1995<br />
14. Professional Memberships: American Society of Mechanical Engineers (ASME), American<br />
Institute of Aerospace and Astronautics (AIAA), Institute of Electrical and Electronics Engineers<br />
(IEEE), International Microelectronics and Packaging Society (IMAPS), American Society for<br />
Composites (ASC)<br />
Teaching Experience, Course, and Curriculum Developed<br />
1. Developed and taught a graduate course Fracture Mechanics (ME 8315) for Spring 2011.<br />
2. Taught an undergraduate course Vibrations (ME 4422) for Fall 2010.<br />
3. Taught an undergraduate course Mechanics of Solids (ME 2333) for Fall 2010.<br />
4. Developed and taught a graduate course Finite Element Analysis (ME 5117) for Spring 2010.<br />
5. Developed Energy Systems concentration curriculum with Dr. M. F. Kiani (ME Chair), Fall 2008.<br />
6. Developed and taught Renewable and Alternative Energy (ME 4575/5575), Fall 2008 and Fall<br />
2011.<br />
7. Developed and taught Mechanics of Composite Materials (ME 4311/5312), <strong>Temple</strong> <strong>University</strong>,<br />
Fall 2005, 2007, 2009, 2011.<br />
8. Developed and taught Metallurgy (ME 4333), <strong>Temple</strong> <strong>University</strong>, Spring 2007.<br />
9. Developed and taught Computer-Aided-Design (ENG 3117), <strong>Temple</strong> <strong>University</strong>, Spring 2005 -<br />
2009.<br />
10. Taught Statics (ENG 2331), <strong>Temple</strong> <strong>University</strong>, Fall 2004, 2006.<br />
11. Aerospace Vehicle Structures II Laboratory, North Carolina State <strong>University</strong>, Spring 2000.<br />
12. Solid Mechanics, North Carolina State <strong>University</strong>, Fall 1999.<br />
<strong>Hutapea</strong> - 10
Students, Postdocs, Visiting Scholars Advised<br />
Postdoctoral Associate:<br />
1. Dr. Naresh V. Datla (from the <strong>University</strong> of Toronto), PhD: June 2011 to present.<br />
Visiting Scholars:<br />
1. Lixin Zhao (Associate Professor, Hebei <strong>University</strong> of Engineering, Handan, Peopleʼs Republic of<br />
China): March – October 2011.<br />
2. Fazel Ashkan (MSE student from Nancy Université, France): April - <strong>August</strong> 2010.<br />
3. Mohamed Abd El Malek Mahmoud Ghaly (PhD student from Cairo <strong>University</strong>, Egypt): May –<br />
<strong>August</strong> 2007.<br />
Graduate Thesis and Dissertation:<br />
1. Mohammad Honarvar, PhD: Summer 2011 to present.<br />
2. Mark Jahanbin, PhD: Fall 2011 to present.<br />
3. Bardia Konh, PhD: Fall 2011 to present.<br />
4. Luis C. Breziner, BSEʼ07/MSEʼ09/PhD: Spring 2006 to present.<br />
5. Georgiy Diloyan, PhD: Fall 2008 to <strong>2012</strong>. Graduated in Spring <strong>2012</strong>.<br />
6. Tuan M. Nguyen, MSE: Fall 2010 to <strong>2012</strong>. Graduated in Spring <strong>2012</strong>.<br />
7. Jing Yuen (Joe) Koo, MSE: Summer 2011 to <strong>2012</strong>. Graduated in Spring <strong>2012</strong>.<br />
8. Daniel J. Won Choi, MSE: Spring 2011 to <strong>2012</strong>. Graduated in Spring <strong>2012</strong>.<br />
9. Christopher Altenderfer, MSE: Fall 2008 to 2010. Graduated in Spring 2010.<br />
10. Jitendra Bambharoliya, PhD: Fall 2009 to Spring 2011.<br />
11. Yuehao Luo, MSE: Graduated in Fall 2007.<br />
12. Mark Smith, BSEʼ06/MSEʼ07: Graduated in Spring 2007.<br />
13. William S. Slovinsky, MSE: Graduated in Fall 2006.<br />
14. Christian Obwogi, MSE: Graduated in May 2005.<br />
15. Teri-Lynn Allonardo, MSE: Fall 2004 to Spring of 2005.<br />
Graduate Thesis and Dissertation Committee Member:<br />
1. Alan Kaufmann (ME), MSE, <strong>2012</strong>.<br />
2. Chukwuemeka Aduba (ECE), PhD <strong>2012</strong>.<br />
3. Mobin Agah (ME), PhD 2011.<br />
4. Jing Bao (ME), MSE 2011.<br />
5. Ali Hemmasizadeh (ME), PhD 2010.<br />
6. Kaveh Laksari (ME), MSE 2009, PhD 2010.<br />
7. Mehdi Shafieian (ME), PhD Qualifying Exam, 2009.<br />
8. Zachary Szczerbinski (ME), MSE 2007.<br />
9. Abdelsalam Elbastawisy (ME), MSE 2005.<br />
10. Payman Saffari (ME), MSE 2005.<br />
<strong>Hutapea</strong> - 11
Undergraduate Thesis (Capstone Senior Design):<br />
1. Bryan Dallas, Project: Lithium-ion Battery Thermal Management System, 2011-<strong>2012</strong>.<br />
2. Chris Decker, Project: Lithium-ion Battery Thermal Management System, 2011-<strong>2012</strong>.<br />
3. Hung Ly, Project: Lithium-ion Battery Thermal Management System, 2011-<strong>2012</strong>.<br />
4. Stephen Barrett, Project: Development of Battery Management System for a Hybrid PEM Fuel<br />
Cell Vehicle, 2010-2011.<br />
5. Emmy Messina, Project: Development of Battery Management System for a Hybrid PEM Fuel<br />
Cell Vehicle, 2010-2011.<br />
6. Jonathan Childs, Project: Development of Battery Management System for a Hybrid PEM Fuel<br />
Cell Vehicle, 2010-2011.<br />
7. Dean Cun, Project: Development of Battery Management System for a Hybrid PEM Fuel Cell<br />
Vehicle, 2010-2011.<br />
8. Peter Strahs (Diamond Scholar), Project: Development of a Hybrid PEM Fuel Cell Vehicle, 2009-<br />
2010.<br />
9. Keith Shaffer, Project: Development of a Hybrid PEM Fuel Cell Vehicle, 2009-2010.<br />
10. Christophe Garant (NIST Undergraduate Research Fellow), Project: Development of a Hybrid<br />
PEM Fuel Cell Vehicle, 2009-2010.<br />
11. Jordan Weaver (NIST Undergraduate Research Fellow): Development of a Hybrid PEM Fuel Cell<br />
Vehicle, 2009 - 2010.<br />
12. Michael Acri, Senior Design Project: Design of Smart Wing III, 2008-2009.<br />
13. Thomas Kirk, Senior Design Project: Design of Smart Wing III, 2008-2009.<br />
14. Kaneshia McClendon, Senior Design Project: Design of Smart Wing III, 2008-2009.<br />
15. Elyse Meyer, Senior Design Project: Design of Smart Wing II, 2007-2008 (1 paper; a mechanical<br />
engineer at Boeing, Seattle, WA).<br />
16. Brendan Roth, Senior Design Project: Design of Smart Wing II, 2007-2008 (1 paper; pursuing a<br />
medical school).<br />
17. Kyle Jacobs, Senior Design Project: Design of Smart Wing II, 2007-2008 (1 paper; an HVAC<br />
engineer in Camden, NJ).<br />
18. Michael Harper, Senior Design Project: Design of Smart Wing II, 2007-2008 (1 paper; a<br />
bioengineer in Horsham, PA).<br />
19. Jinho Kim, Senior Design Project: Design of Smart Wing, 2006-2007 (1 paper/provisional<br />
patent/national award; a PhD student at Columbia <strong>University</strong>, NY).<br />
20. Andrew Guion, Senior Design Project: Design of Smart Wing, 2006-2007 (1 paper/provisional<br />
patent/national award; a mechanical engineering at Federal Aviation Administration, Seattle,<br />
WA).<br />
21. Charlie Hanna, Senior Design Project: Design of Smart Wing, 2006-2007 (1 paper/provisional<br />
patent/national award; an HVAC engineer in Portland, OR).<br />
22. Noah Heulit, Senior Design Project: Design of Smart Wing, 2006-2007 (1 paper/provisional<br />
patent/national award; a metallurgy engineer in Baltimore, MD).<br />
Undergraduate Non-Thesis (Research Assistants):<br />
1. Tyler Tolton, Project: NSF NUE: A Sustainable Urban Environment Advanced by Engineers<br />
Empowered with Nanotechnology, Summer <strong>2012</strong>.<br />
<strong>Hutapea</strong> - 12
2. Kyle Stern, Project: NSF NUE: A Sustainable Urban Environment Advanced by Engineers<br />
Empowered with Nanotechnology, Spring <strong>2012</strong>.<br />
3. Bryan Dallas, Project: NSF NUE: A Sustainable Urban Environment Advanced by Engineers<br />
Empowered with Nanotechnology, Spring 2011 to Fall 2011.<br />
4. Stephen Barrett, Project: Smart Nano Pipet for 2D Membrane Electrophoresis, 2009 – 2010.<br />
5. Peter Strahs (Diamond Scholar), Project: Development of a Hybrid PEM Fuel Cell Vehicle, 2009-<br />
2010.<br />
6. Keith Shaffer, Project: Development of a Hybrid PEM Fuel Cell Vehicle, 2009-2010.<br />
7. Christophe Garant (NIST Undergraduate Research Fellow), Project: Development of a Hybrid<br />
PEM Fuel Cell Vehicle, 2009-2010.<br />
8. Jordan Weaver (NIST Undergraduate Research Fellow): Development of a Hybrid PEM Fuel Cell<br />
Vehicle, 2009 - 2010.<br />
9. Daniel Faro (from Lehigh <strong>University</strong>), Project: Smart Nano Pipet for 2D Membrane<br />
Electrophoresis, 2009 – 2010.<br />
10. Timothy Jennings (Diamond Scholar), Project: Influence of Vibration on PEM Fuel Cells, Summer<br />
to Fall 2008.<br />
11. Patrick McCunney, Project: Smart Nano Pipet, Summer 2008.<br />
12. Chaitanya Sakhalkar, Project: Smart Nano Pipet, Summer 2008.<br />
13. Kendrick Davis (Diamond Scholar), Project: Development of Bone Lengthening Device using<br />
Magnetostriction Smart Materials, Summer and Fall 2007.<br />
14. Luis C. Breziner (Diamond Scholar), Project: The Influence of Harsh Environmental Conditions<br />
on the Failure Mechanisms of Carbon Fiber-reinforced Composite-Metal Joints, Summer and Fall<br />
2006.<br />
15. Michael Mahan, Summer 2006, 2006 Fatigue and Fracture Conference Student Award, <strong>August</strong> 6<br />
– 9, 2006, Philadelphia, PA<br />
16. Mark Smith (Diamond Scholar), Project: Development of Composite-Metal Hybrid Joints,<br />
Summer to Fall 2005.<br />
17. Marwan Mougharbel, Project: Microelectronic Package, Spring 2006.<br />
18. Modi Amodou (from Drexel <strong>University</strong>), Project: Development of a Bone Lengthening Device,<br />
Summer 2005.<br />
19. Elyse Meyer, Project: Development of a Bone Lengthening Device, Spring 2005.<br />
20. Bhavesh Patel, Project: Development of a Bone Lengthening Device, Summer 2005.<br />
High School:<br />
1. Anu Thomas (9 th Grade), Project: Composites and its applications, Summer 2006.<br />
Awards Received by Students Advised<br />
1. Mohammad Honarvar for 2 nd Place in Undergraduate Division: 3 rd College of Engineering<br />
Research Poster Competition ($250), <strong>2012</strong>.<br />
2. Kyle Stern, Diamond Peer Teaching ($2,750), Fall 2011.<br />
3. Peter Strahs, Jordan Weaver, Christophe Garant, Keith Shaffer: Hybrid Electric Fuel Cell<br />
Vehicle, Ridenour Prize for Best Senior Design Project ($1,000), 2010.<br />
4. Jordan Weaver, Engineers Week Scholarship ($1,000), 2010.<br />
<strong>Hutapea</strong> - 13
5. Peter Strahs for 1st Place in Undergraduate Division: 3 rd College of Engineering Research<br />
Poster Competition ($250), 2010.<br />
6. Kendrick Davis: <strong>Temple</strong> <strong>University</strong> Class of 2009 Commencement Speaker.<br />
7. Peter Strahs: Development of a Hybrid PEM Fuel Cell Vehicle, Summer Undergraduate<br />
Research Award ($4,000) and Diamond Award, 2009.<br />
8. Christophe Garant: Development of a Hybrid PEM Fuel Cell Vehicle, Summer Undergraduate<br />
Research Award and NIST Research Fellowship ($8,000), 2009.<br />
9. Jordan Weaver: Development of a Hybrid PEM Fuel Cell Vehicle, NIST Research Fellowship<br />
($4,000), 2009.<br />
10. Timothy Jennings: Influence of Vibration on PEM Fuel Cells, Diamond Scholars ($2,750 plus 3<br />
credit hour tuition), 2008.<br />
11. Peter Strahs: Influence of Vibration on PEM Fuel Cells, Summer Undergraduate Research<br />
Award ($2,400), 2008.<br />
12. Chaitanya Sakhalkar: Smart Nano Pipet, Summer Undergraduate Research Award ($2,400),<br />
2008.<br />
13. Luis C. Breziner: 3 rd place in the graduate division in the 2 nd College of Engineering Research<br />
Poster Competition ($200), 2008.<br />
14. Kendrick Davis: 1 st place in the undergraduate division in the 2 nd College of Engineering<br />
Research Poster Competition ($200), 2008.<br />
15. Luis C. Breziner: Future Faculty Fellowship ($44,800 plus 48 credit hour tuition), 2007-2009.<br />
16. Jinho Kim: Finalist in the 2007 National Collegiate Inventors Competition, Caltech, Pasadena,<br />
CA. ($2,000 and Travel Award).<br />
17. William S. Slovinsky: 1 st place in the 1st College of Engineering Research Poster Competition<br />
($200), 2007.<br />
18. Kendrick Davis: Development of Bone Lengthening Device, Diamond Scholars ($2,750 plus 3<br />
credit hour tuition), 2007.<br />
19. Jinho Kim, C. Hanna, A. Guion, N. Heulitt: Fly by Heat: Smart Wing, Ridenour Prize for Best<br />
Senior Design Project ($1,000), 2007.<br />
20. Zachary S. Szczerbinski, Djodjo Amorin, Emilio E. Drakes: Design of New Multi-Layered Fabric<br />
for Use in Armour Protection, Finalist of the 2006 AATCC Engineering Design Competition.<br />
21. Michael Mahan: Travel Award to attend 1 st International Conference on Fatigue and Fracture in<br />
the Infrastructure Bridges and Structures of the 21 st Century, Philadelphia, PA ($2,750), 2006.<br />
22. Luis C. Breziner: Development of Composite Wings for Small Aircraft, Diamond Scholars ($2,750<br />
plus 3 credit hour tuition), 2006.<br />
23. Mark Smith: Development of Composite-Metal Hybrid Joints, Summer Undergraduate Research<br />
Award ($1,500), 2005.<br />
24. Mark Smith: Development of Composite-Metal Hybrid Joints, Diamond Scholars ($2,750 plus 3<br />
credit hour tuition), 2005.<br />
25. Bhavesh Patel: Development of Bone Lengthening Device, Summer Undergraduate Research<br />
Award ($1,500), 2005.<br />
26. Modi Amodou: Development of Bone Lengthening Device, Summer Research Fellowship,<br />
<strong>Temple</strong> <strong>University</strong> NSF Alliance for Minority Participation ($2,000), 2005.<br />
27. Teri-Lynn Allonardo: Dimensional Stability of Microelectronic Substrate, NSF Graduate Research<br />
Fellowship (Honorable Mention), 2005.<br />
<strong>Hutapea</strong> - 14
Service Activities<br />
Service to the Profession:<br />
1. Reviewer for Journal of Vibration and Control, <strong>2012</strong>.<br />
2. Committee Member, Advanced Materials and Structures (AMS) for Earth and Space <strong>2012</strong><br />
Conference, Pasadena, California, April 15-18, <strong>2012</strong>.<br />
3. Reviewer for Journal of Renewable and Sustainable Energy, <strong>2012</strong>.<br />
4. Session Chair for the 2011 ASME Summer Bioengineering Conference, Farmington,<br />
Pennsylvania, June 22 – 25, 2011.<br />
5. Review Panelist for the American Heart Association (AHA) Grant Program, Spring - Fall 2011.<br />
6. Speaker for the 2010 World Green Energy Symposium, October 21 – 23, 2010.<br />
7. Reviewer for Journal of Composite Materials, 2011.<br />
8. Reviewer for Medical Physics, 2011 - <strong>2012</strong>.<br />
9. Reviewer for Nanotechnology, 2009 – 2011.<br />
10. Review Panelist for the DOE Advanced Research Projects Agency – Energy (ARPA-E) Grant<br />
Program, <strong>August</strong> 2009.<br />
11. Review Panelist for the DOE Smart Grid Grant Program (Office of Electricity Delivery and Energy<br />
Reliability), <strong>August</strong> 2009.<br />
12. Review Panelist for the NSF SBIR/STTR Phase I BCT: Biomedical Devices Panel, Washington,<br />
DC, <strong>August</strong> 19, 2009.<br />
13. Committee Member, Advanced Materials and Structures (AMS) for 2009 ASCE-ASME-SES Joint<br />
Conference, Virginia Tech, VA, June 24 – 27, 2009.<br />
14. Reviewer for Applied Physics Letter, 2008.<br />
15. Reviewer for Microelectronic Engineering, 2008.<br />
16. Reviewer for Journal of Vibration, 2008.<br />
17. Session Chair at AIAA/ASME 3 rd Annual Aerospace/Mechanical Engineering Mini-Symposium,<br />
Philadelphia, Pennsylvania, 2007.<br />
18. Reviewer for ASCE Journal of Aerospace Engineering, 2006-2007.<br />
19. Reviewer for Indian Journal of Engineering & Materials Sciences, 2007.<br />
20. Reviewer for Experimental Mechanics, 2007.<br />
21. Session Chair at the ASCE Engineering Mechanics Conference Mechanics of Advanced Materials and<br />
Structures, Blacksburg, Virginia, June 2007.<br />
22. Panelist. AIAA, Careers in Aerospace: A Panel Discussion of Opportunities in the Aerospace Industry,<br />
Philadelphia, Pennsylvania, 2006.<br />
23. Reviewer for IMECE, ASME International Mechanical Engineering Congress and Exposition, Orlando,<br />
Florida USA, November 5-11, 2005<br />
24. Workshop on Wireless Sensor Networks, North Carolina State <strong>University</strong>; June 7, 2005, Raleigh, North<br />
Carolina, 2005.<br />
25. Reviewer for a book titled: Evolvable Design of Experiments: Applications for Printed Circuit Boards<br />
(Taylor and Francis Books, Inc.), 2005.<br />
26. Reviewer for Composite Science and Technology, 2005.<br />
27. Emerging Infrastructure Materials Advancements in Science and Mechanics, Woodhead Publishing,<br />
2004.<br />
<strong>Hutapea</strong> - 15
28. Semiconductor Research Corporation (SRC) Workshop, Dimensional Stability of Electronic Substrates,<br />
Bethlehem, Pennsylvania, 2004.<br />
29. The <strong>University</strong> of Akron Engineering Seminar Series, Akron, Ohio, December, 2004.<br />
30. Lehigh <strong>University</strong> Engineering Seminar Series, Bethlehem, Pennsylvania, December, 2004.<br />
31. Intel Corporation Seminar Series, Chandler, Arizona, December, 2004.<br />
32. Lehigh <strong>University</strong>, Dimensional Stability of Electronic Substrates, Bethlehem, Pennsylvania, 2004.<br />
33. Visteon Corporation Seminar Series, Lansdale, Pennsylvania, May, 2003.<br />
34. Reviewer for Acta Materialia, 2002.<br />
35. Visteon Corporation Seminar Series, Lansdale, Pennsylvania, May, 2002.<br />
Service to the <strong>University</strong>:<br />
1. Member of College of Engineering Promotion and Tenure Committee, 2010 - <strong>2012</strong>.<br />
2. Organized Department of Mechanical Engineering Faculty Search, 2010 – 2011.<br />
3. Peer Review of Teaching Workshop, Spring 2011.<br />
4. Member of College of Engineering Research, Computer, and Communications Committee, 2009 - <strong>2012</strong>.<br />
5. Member of College of Engineering Personnel, Nominations, and Elections Committee, 2005 - 2009.<br />
6. Member of College Personnel, Nominations, and Elections Committee, 2005 - 2009.<br />
7. Developed the Robert M and Mary Haythornthwaite Distinguished Lecture Series, 2006 - 2007.<br />
8. Member of Faculty Advisors: Diamond Honors Program, 2005-2007.<br />
9. Member of Faculty Advisors: NSF Alliance for Minority Participations, 2005-2007.<br />
Service to the Community:<br />
1. Women Exploration in Engineering (WE2) for high school students, July 2009.<br />
2. Mentoring of a High School Student, Anu Thomas (Philadelphia Central High School), 2006-2007.<br />
3. Review of high school teachers to assess their competences in engineering-related technology (through<br />
<strong>Temple</strong> <strong>University</strong> Career & Technical Education), 2005 - 2008.<br />
<strong>Hutapea</strong> - 16