Sartorius Cubis® Series - Sartorius - Sartorius AG

Cubis ® Display and Control UnitsTypes MSA MSU MSEOperationTouch screen, keys for central basic KeysKeysfunctionsDisplayHigh-resolution color TFT,5.7" graphic displayHigh-resolution black-and-white,5.7" graphical displayLiquid crystal display, black-andwhiteAdaptation of thedisplay and control unitTiltable display, removable display and control unitRemovable display and control unitStandard data interfaces– USB (integrated into weighing module)– Various data protocols available (can also be connected to softwaredesigned for external manufacturers)– RS-232C accessory interface, 25-pin (integrated into weighing module)– Ethernet (integrated into display and service unit)SD card reader Integrated as standard into display and control unit –Operation of the motorizeddraft shield (only for DA, DI,DM draft shields)ApplicationsActivated by side keys or touch-free usingIR switch (optional); learning capabilityUnit conversion, SQmin function for minimum initial weight accordingto USP, isoCAL automatic calibration | adjustment function, individualidentifiers, density determination, statistics, calculations, averaging,formulation, weighing in percent, time-controlled functions, totalizing, DKDmeasurement uncertainty, second tare memory, counting, checkweighing,alibi memory, audit trail– USB (integrated into weighingmodule)– RS-232C accessory interface,25-pin (integrated into weighingmodule)Activated by key or touch-freeusing IR switch (optional); learningcapabilityUnit conversion, isoCAL automaticcalibration | adjustment function,density determination (buoyancymethod only), calculations,averaging, net | total formulation,weighing in percent, countingCubis ® Weighing ModulesUltramicrobalances 0.0001 mgModel 2.7S 2.7S (with DF filter draft shield)Readability mg 0.0001 0.0001Weighing Capacity g 2.1 2.1Tare range (subtractive) g – 2.1 – 2.1Repeatability

Pipette Calibration Hardware and SoftwarePipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readabilityConsists of moisture trap and all required adaptersPipette calibration kit (hardware) for microbalance weighing modules 6.6S and 3.6PConsists of moisture trap and all required adaptersPipette Tracker pipette calibration software. Software and user manual in English only.Pipette Tracker Pro pipette calibration software, for use in regulated areas, networkable and validatable,according to the 21 CFR Part 11 regulations. Software and user manual in English only.Documentation basis for validation (IQ, OQ) of Pipette Tracker PRO version.All documents are in English only.Filter Weighing and Antistatic AccessoriesAntistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mgFilter weighing pan d 75 mm, for ultramicrobalance or microbalance models(weighing modules 6.6S, 2.7S; only together with DF draft shield)Filter weighing pan d 90 mm, for ultramicrobalance or microbalance models(weighing modules 6.6S, 2.7S; only together with DF draft shield)Ionization blower to eliminate electrostatic charges on sample containers and samplesStat-Pen ionization probe for discharging electrostatically charged samples and filtersSpecial ApplicationsDensity determination kit for solids and liquids for weighing modules with a readability of < 1 mgDensity determination kit for solids and liquids for weighing modules with a readability of 1 mgQ-Grip, flexible holder for weigh-in containers and filters up to 120 mm diameter (replaces the original weighing pan;for Cubis ® models with 0.01 and 0.1 mg readability)Q-Grid grid weighing pan for Cubis ® models with 10 mg or 100 mg readability for weighing in laboratory hoods, safety weighingcabinets, or workbenches (smaller areas exposed to draft on the weighing pan; replaces the standard weighing pan)Weighing TablesWeighing table made from synthetic stone, with vibration dampeningWall consoleWeighing table made from wood with synthetic stone for precise, reliable measurementsYCP04MSVF988YCP04-PTYCP04-PTProYCP04-VTKYWP01MSVF2562VF2880YIB01-0DRYSTP01YDK01MSYDK02MSYFH01MSYWP03MSYWT03YWT04YWT09Weighing AccessoriesWeighing scoop made from chrome nickel steel, 90 + 32 × 8 mm 641214Aluminum weighing scoop, 4.5 mg (250 pieces) for ultramicrobalance and microbalance models 6565-250Aluminum weighing scoop, 52 mg (50 pieces) for ultramicrobalance and microbalance models 6566-50Support arm for 10 | 100 mg precision weighing modules for raising MSE, MSU, and MSA display and control unitsYDH01MSThe brand name and logo for Bluetooth ® wireless technology are owned by Bluetooth SIG Inc. The use of this brand name and trademark bySartorius AG is under license. Other brand names and trademarks are the property of their respective owners.13

Balance DimensionsUltramicrobalance | Microbalance control unit MSA | MSU with E-boxAll dimensions are given in millimeters14

Ultramicrobalance | Microbalance weighing module with DM draft shieldAll dimensions are given in millimeters16

Ultramicrobalance | Microbalance weighing module with DF draft shieldAll dimensions are given in millimeters17

Semi-microbalances with Motorized Draft ShieldAll dimensions are given in millimetersInnenmaße Windschutz DUDraft shield DU interiordimensions(H)250 + (W)192 + (D)15418

Semi-micro and Analytical Balances with Manual DU Draft ShieldAll dimensions are given in millimetersInnenmaße Windschutz DUDraft shield DU interiordimensions(H)261 + (W)193 + (D)19119

Precision Balances with a Readability of 1 mg and Manual DE Draft ShieldAll dimensions are given in millimetersInnenmaße WindschutzWindshield inside dimensions(H)172 + (W)193 + (D)19120

Precision Balances with a Readability of 1 mg and Framed DR Draft ShieldAll dimensions are given in millimeters21

Precision Balances with No Draft ShieldAll dimensions are given in millimeters22

Sartorius Weighing Technology GmbHWeender Landstrasse 94-10837075 Goettingen, GermanyPhone +49.551.308.0Fax +49.551.308.3289info.mechatronics@sartorius.comwww.sartorius-mechatronics.comTechnical specifications subject to changewithout notice.Printed in Germany.Printed on bleached, chlorine-free paper. | WPublication No.: W--2025-e11083Order No.: 98649-011-60