Technical Data Sheet Installation Tools - Oetiker

More documents

Recommendations

Info

7.77.79131313.5Special Pincer Heads for Oetiker ME/ELwww.oetiker.comSpecial Pincer Heads for Oetiker ME/EL– Installation of Oetiker Stepless ® Low Profile Clamps14All Oetiker Stepless ® Low Profile Clamps have unique headrequirements and are specific to the product group designationand type.When using Oetiker ME pneumatic pincers, it is essential to usea throttle valve for adjusting the closing speed.Oetiker recommends the use of appropriate calibration equipmentand techniques to ensure that the closing force is achieved.When used in conjunction with the HO EL body assembly, theforce and closed gap can be controlled and monitored.Pincer heads for installing reusable Stepless ® Low ProfileClamps – Product Group 168 (RWV)The hold-down springs fitted to both jaws make closure easierand improve handling. Compatible with pincer types HO 2000to HO 4000.90Pincer headsJaw width (mm) 9.0Pincer typesHO ME Pincer head complete 13900257Replacement-jaw kit 13900295Spring accessory 13900302Calibration adaptor 13900590Throttle valve with plug DN6 13900636Throttle valve with adaptor for NPT 1 13900637HO EL Pincer head complete 13900634Replacement-jaw kit 13900295Spring accessory 13900302Calibration adaptor 13900590Pincer heads for installing Stepless ® Low Profile Clamps –Product Group 168The optional hold-down springs improve handling, especially forproduction-line applications. Can be used for standard clampsfrom 40 mm (or approx. 19.5 mm for special types). Can be usedfor clamps 7, 9 mm and 10 mm wide. Compatible with pincertypes HO 3000 and HO 4000.83.1SpecialPincer headsStandard Special*Jaw width (mm) 7.7 7.7Pincer typesHO ME Pincer head complete 13900664 13900666Replacement-jaw kit 13900673 13900673Spring accessory 13900675 13900676Calibration adaptor 13900590 13900590Throttle valve with plug DN6 13900636 13900636Throttle valve with adaptor for NPT 1 13900637 13900637HO EL Pincer head complete 13900663 13900665Replacement-jaw kit 13900673 13900673Spring accessory 13900675 13900676Calibration adaptor 13900590 13900590* Low-profile clamp with single closure hook – only for 7 mmband width. Especially suitable for small low-profile clampsPincer heads for installing Stepless ® Low Profile Clampswith tolerance compensation – Product Group 168Compatible with pincer types HO 3000 and HO 4000.83.1Pincer heads RT 8Jaw width (mm) 7.7Pincer typesHO ME Pincer head complete 13900670Replacement-jaw kit 13900673Calibration adaptor 13900590HO EL Pincer head complete 13900669Replacement-jaw kit 13900673Calibration adaptor 13900590Rights to make technical changes in the interests of further development reserved.
7.513Special Pincer Heads for Oetiker ME/ELwww.oetiker.com15Pincer head for installing Stepless ® Low Profile Clamp 192 –Product Group 192Compatible with pincer types HO 5000 EL and HO 7000 EL.10.511217Stepless ® Low Profile Clamp 192with tolerance compensation elementPincer heads1/3 wavesJaw width (mm) 10.5Pincer typesHO EL Pincer head complete 13900555Replacement-jaw kit 13900556Calibration adaptor EL 13900495Pincer head for installing Clamps ER – Product Group 194Compatible with pincer types HO 2000 – 4000.Pincer headsJaw width (mm) 7.5~112Pincer typesHO ME/ELOn request
Page 2 and 3: Installation of Ear Clamps and Low
Page 4: Installation of Ear Clamps and Low
Page 13: Special Pincer Heads for Oetiker ME
Page 22: www.oetiker.comThe Oetiker Group: w

Technical Data Sheet Installation Tools - Oetiker

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?