Technical Data Sheet Installation Tools - Oetiker

Installation of Ear Clamps and Low Profile Clampswww.oetiker.com17Technical Data* CP 01 CP 02 CP 03Closing force range: 1000 N–4200 N** 4200 N–8500 N** 4500 N–9000 N*External dimensions: 410 x 56 x 80 mm 445 x 56 x 80 mm 445 x 56 x 80 mmWeight: 2050 g (4.5 lbs) 2250 g (5.0 lbs) 2300 g (5.0 lbs)Closing time: 2 seconds 2 seconds 2 seconds** Approx. data** Closing force, depending on pincer head, can be determined via:– CAL 01, only with Software Generation V2.2 or higher– SKM 01 or SKM 02Selection of complete pincer systemsThe complete pincer system consists of pincer head and pincer.1) First select the pincer head in accordance with the requirement.2) Then select the pincer type in the corresponding columns below. The item numbers for the pincer include the pincerand the desired pincer head.Pincer heads CP 01 CP 01 CP 01 CP 02 CP 02 CP 03Jaw width (mm) 7.5 10.2 10.2 10.5 10.5 14.5Open gap (mm) 13.2 13.2 16.2 13.7 16.6 16.6For ear width* (mm) 10 10 13 10 13 13Item No. 13900683 13900659 13900725 13900662 13900660 13900711Selection of pincer type according to language/country (main plug)CP set withoutpincer headCP 01 (AUS) - 13900651 - - - - 13900698Replacement-jaw kit 13900163CP 01 (EU) - 13900650 - - - - 13900699Replacement-jaw kit 13900163CP 01 (UK) - 13900653 - - - - 13900700Replacement-jaw kit 13900163CP 01 (US) - 13900652 - - - - 13900701Replacement-jaw kit 13900163CP 02 (AUS) - - - 13900655 - - 13900702Replacement-jaw kit 13900164CP 02 (EU) - - - 13900654 - - 13900703Replacement-jaw kit 13900164CP 02 UK) - - - 13900657 - - 13900704Replacement-jaw kit 13900164CP 02 (US) - - - 13900656 - - 13900705Replacement-jaw kit 13900164CP 03 (AUS) - - - - - 13900713 13900717Replacement-jaw kit 13900545CO 03 (EU) - - - - - 13900712 13900716Replacement-jaw kit 13900545CP 03 (UK) - - - - - 13900715 13900719Replacement-jaw kit 13900545CP 03 (US) - - - - - 13900714 13900718Replacement-jaw kit 13900545* Measured inside