Jubilee Clips - F R Scott Ltd
Jubilee Clips - F R Scott Ltd
Jubilee Clips - F R Scott Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Aerospace <strong>Clips</strong>BS2SP91/BSSP144SP91 – Carbon steel worm drive clamps for aircraftManufactured to BS2SP91 in mild steel cadmium platedSize Ref.SPECIFICATIONmmAdjustmentinchesA 13 – 16 0.5 – 0.625B 13 – 19 0.5 – 0.75C 16 – 22 0.625 – 0.875D 19 – 25 0.75 – 1.0E 22 – 28 0.875 – 1.125F 25 – 35 1.0 – 1.375G 28 – 41 1.125 – 1.625H 32 – 48 1.25 – 1.875J 38 – 54 1.5 – 2.125K 44 – 60 1.75 – 2.375L 50 – 70 2.0 – 2.75M 60 – 80 2.375 – 3.125N 70 – 90 2.75 – 3.5P 82 – 100 3.25 – 4.0Q 95 – 115 3.75 – 4.5R 105 – 125 4.125 – 5.0SP144 – Corrosion resisting worm drive clamps for aircraftManufactured to BSSP144 in all 18/8 stainless steelSPECIFICATION<strong>Jubilee</strong> ® is a registered trade mark of L Robinson & Co (Gillingham) Limited.Size Ref.mmAdjustmentinches13 9 – 13 0.375 – 0.516 13 – 16 0.5 – 0.62519 13 – 19 0.5 – 0.7522 16 – 22 0.625 – 0.87525 19 – 25 0.75 – 1.028 22 – 28 0.875 – 1.12535 25 – 35 1.0 – 1.37541 28 – 41 1.125 – 1.62548 32 – 48 1.25 – 1.87554 38 – 54 1.5 – 2.12560 44 – 60 1.75 – 2.37570 50 – 70 2.0 – 2.7580 60 – 80 2.375 – 3.12590 70 – 90 2.75 – 3.5100 82 – 100 3.25 – 4.0115 95 – 115 3.75 – 4.5125 105 – 125 4.125 – 5.0L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
High TorqueFor applications requiring extra high levels of tightening torqueTwice the tightening torque of standard worm drivehose clips which creates more than twice the bandtension for those stubborn leakage and highvibration applications.All stainless steel construction. Breaking torque of <strong>Jubilee</strong> high torque iscomparable to conventional ‘T’ bolt clamp of equalsize.Recommended tightening torque 17 Nm (150 lb in).<strong>Jubilee</strong> High Torque clips for applications thatrequire extra high levels of tightening torque.They can be used on hose applications such asspiral wound wire reinforced suction hose.High Torque clips are appropriate in those heavyduty situations where the general British Standardproduct is not suitable.Ask our Sales Department for further information.MATERIAL SPECIFICATIONStainless SteelBand:BS/AISI 304 A2Housing: BS/AISI 304 A2Screw: BS/AISI 410Size Working DiameterNo. mm Inches3540455070809510012014016018020022024026028030032034036038040042044046048050020- 3525- 4025- 4530- 5040- 7060- 8070- 9580-10090-120110-140130-160150-180170-200190-220210-240230-260250-280270-300290-320310-340330-360350-380370-400390-420410-440430-460450-480470-5003/4 - 1 3 /81 - 1 5 /81 - 1¾1 1 /4 - 21 5 /8 - 2 3 /42 3 /8 - 3 1 /82¾ - 3¾3 1 /8 - 43½ - 4¾4 3 /8 - 5½5 1 /8 - 6¼5 7 /8 - 76 3 /4 - 7 7 /87½ - 8 5 /88¼ - 9½9 - 10¼9 7 /8 - 1110 5 /8 - 11¾11 3 /8 - 12½12¼ - 13 3 /813 - 14 1 /813¾ - 1514½ - 15¾15 3 /8 - 16½16 1 /8 - 17¼17 - 18 1 /817¾ - 18 7 /818½ - 19 5 /8BoxQuantities50505050505050505050505025252525252525252525252525252525<strong>Jubilee</strong> ® is a registered trade mark of L Robinson & Co (Gillingham) <strong>Ltd</strong>.We reserve the right, without prior notice, to alter the materials used to accord with new and/or improved specificationsL Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
Juniors(Nut & Bolt <strong>Clips</strong>)Small nut and bolt clipsused mainly in themotor trade forsecuring petrol pipes,heater hoses and smallbore applications etc.Manufactured in zincplated mild steel with astandard 7mm hexagonheaded screw. Sizerange from 7 to 20mm.SPECIFICATIONPart No. AdjustmentNB 070907-09mmNB 081008-10mm Tightening Torque:NB 091109-11mm Maximum 1.2 NmNB 101210-12mmNB 111311-13mm Screw: 7mm A/FNB 121412-14mmNB 131513-15mm Material: Zinc finishedNB 141614-16mm mild steelNB 151715-17mmNB 161816-18mmNB 182018-20mm<strong>Jubilee</strong> Juniors are ideal for use on petrol pipes and small borehoses.L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
L-R ®Lightweight Range Hose <strong>Clips</strong> to DIN 3017The L-R clip has been designedfor low torque applications. It ismanufactured to meet andexceeds DIN 3017. The L-R cliphas been developed overseveral years and meets thehigh standard of quality andperformance required of all<strong>Jubilee</strong> products.The benefits of weight savingand extra corrosion resistanceallow this addition to the fullrange of <strong>Jubilee</strong> clips to offerthe customer a greater flexibilityin meeting their ownrequirements.SizeRecommendedWorking Range(mm)LR2212- 22LR2516- 25LR3022- 30LR3220- 32LR3523- 35LR4025- 40LR4530- 45LR5032- 50LR5540- 55LR6040- 60LR7050- 70LR8060- 80LR9070- 90LR10080-100LR11090-110LR120100-120LR130110-130LR140120-140LR150130-150LR160140-160LR170150-170LR180160-180LR190170-190For larger sizes please contact usBandHousingScrewPlating“Z” LengthMaximum(mm)2424242428282828333333333333333333333333333333MATERIAL SPECIFICATIONMild SteelBS1449BS1449BS970BS1706 ZN3Stainless Steel304 A2304 A2304 A2304 A2<strong>Jubilee</strong> L-R ® is a registered trade mark of L Robinson & Co (Gillingham) <strong>Ltd</strong>.BandThickness(mm)0.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.76Band Width(mm)9.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.99.9RecommendedTightening TorqueN.M. Kg/cm.3 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.63 30.6L-R Clip Dispenser available in bothmild steel and stainless steel.Ask for details.L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
MultibandMultiband“SNIP THE CLIP”Don’t get caught out in an emergency…….Choose <strong>Jubilee</strong> Ç Multiband to make a clip to any sizeQuick, versatile and handySimply cut to length, add a housing, insert a screw and tighten to sizeDid you know?……. The <strong>Jubilee</strong> Ç Multiband range is available in:-11MM ZINC PLATED MILD STEEL:-1701 Banding in dispensers containing 10 metres1702 Banding in dispensers containing 30 metres1703 Housings/screws in boxes containing 100 sets1704 Housings/screws in boxes containing 25 sets1705 Housings/Allen socket screws in boxes containing 100 sets1706 Captive screws in boxes containing 1001708 Handy Pack (10 metres of band with 25 housings/screws)Slotted Screw11mm zinc platedmild steel orstainless steel.Allen Screw11mm zinc platedmild steel orstainless steel.(3/16”)Captive Screw11mm zinc platedmild steel orstainless steel.Flip/Lock Screw7mm all stainlesssteel.11MM STAINLESS STEEL (304):-1802 Banding in dispensers containing 30 metres1803 Housings/screws in boxes containing 100 sets1804 Housings/Allen socket screws in boxes containing 100 sets1805 Captive screws in boxes containing 1001806 Handy Pack (10 metres of band with 25 housings/screws)7MM SLIMLINE STAINLESS STEEL (304):-1601 Banding in dispensers containing 25 metres1602 Banding in dispensers containing 50 metres1603 Flip/Lock housings/screws in boxes containing 25 sets1604 Flip/Lock housings/screws in boxes containing 100 setsEvery toolbox should have a versatile Multiband handy pack containing all you need to make your own fastenerL Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
‘O’ <strong>Clips</strong> from2-Ear Clamps from Tube2-Ear clamp widelyused for maintenanceand OEM applications.Mainly used on air,fluid, gas and steamlines, also suitable forlow pressure hydraulicapplications.Ideal for where therequirement is for aneat finish with nobulky housing to catchon obstructions.Pincers are used tocrimp the ears of theclamps and affect aproper seal.Material:Mild steel zinc plated, clearpassivated and stainless steel304 (special order)Pincers:Normal Closing (Part No. 1098)Side Closing* (Part No. 1099)*For use when access to ear is difficultmore over…………..Part No.0041004503050507070908110911111313151517151816191720192220232225232725282731283131343437374040434346TheoreticalClampingRange mm3.1-4.13.5-4.53.0-5.05.0-7.07.0-9.08.0-11.09.0-11.011.0-13.013.0-15.015.0-17.015.0-18.016.0-19.017.0-20.019.0-22.020.0-23.022.0-25.023.0-27.025.0-28.027.0-31.028.0-31.031.0-34.034.0-37.037.0-40.040.0-43.043.0-46.0Widthmm3.53.55.06.07.07.07.07.07.58.08.08.08.59.09.010.010.010.010.010.010.010.010.010.010.0Thicknessmm0.50.60.70.71.01.01.01.01.01.21.21.21.21.51.51.51.51.51.51.51.51.51.51.51.5InnerWidthof Earmm1.51.52.53.03.24.53.53.54.05.05.05.06.06.56.56.57.06.57.56.57.58.08.08.58.5PolybagPackQty.50505050505050505050505050505025252525252525252525
Rubber hose, plastictubing, coaxial, ropeand electrical cableare all easily clampedwith this product.When installing ‘O’ clips, please note Position clip on hose as illustrated. Give each ear a firm squeezethat each ear must be crimped aswith your pincers.recommendedto obtain aproper seal.An incorrectly made installation mayimpair the best connection. If a clampear can be closed all the way, the clipsize selected is probably too big andthe next smaller size should beordered.hose sizes.Where access to ear isdifficult, use side closingpincers.Grip the outer edge of ear firmly and Cut the ear by taking several small Then grip ear firmly andcut through it with either pincers. bites at its base with either pincers. twist it off.The one piece designoffers a positive,tamper-proof sealwithout damage to thehose.<strong>Jubilee</strong> ’O’ clips assureadequate closure andwill compensate fortolerance variations inWhile both ears must be closed all the way to effect a proper seal, 2-ear clamps are bestinstalled with one ear closed all the way first. The second ear is then closed so that the firstear opens slightly (gap to be approximately 1.5mm). This builds a resilient strength into theclamp in a spring-like action to hold against pressure, vibration and hose shrinkage due totemperature changes or ageing.‘O’ <strong>Clips</strong> Kit fromThe ‘O’ clip kit is a versatile andconvenient dispenser for themost popular sizes of double earclips.The kit comes completewith/without normal closingpincer and is ideal for the userwho needs to have a selection ofdifferent size clips availablewhen on the move.Total contents: 175 ‘O’ clipsCONTENTSQuantityPartNo.200507200709200811200911201113151315201517201518201720Material: Mild steel zinc plated and clear passivatedAvailable: With/without normal closing pincerDimensions mm: 40 [H] x 270 [W] x 175 [D]ClampingRange5- 7mm7- 9mm8-11mm9-11mm11-13mm13-15mm15-17mm15-18mm17-20mmNominalSize1/4”5/16”3/8”7/16”1/2"9/16”19/32”5/8”3/4"Available from:-<strong>Jubilee</strong> Å is a registered trade mark of L Robinson & Co (Gillingham) Limited.’O’ CLIPS FROM:-L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
SuperclampsHeavy Duty Bolt Clampsfor use on heavy duty hosesUsed for demanding applications,the <strong>Jubilee</strong> Superclamp is easilyadjusted by a single nut and bolt.Available in mild steel zinc platedand also in 316 (A4) stainless steel.Mild steel zinc plated product specification:-PartNo.JSC019JSC022JSC025JSC028JSC031JSC035JSC039JSC043JSC047JSC051JSC055JSC059JSC063JSC067JSC073JSC079JSC085JSC091JSC097JSC103JSC112JSC121JSC130JSC139JSC148JSC161JSC174JSC187JSC200JSC213JSC226JSC239JSC252JSC265Min-MaxDia. mm17-1920-2223-2526-2829-3132-3536-3940-4344-4748-5152-5556-5960-6364-6768-7374-7980-8586-9192-9798-103104-112113-121122-130131-139140-148149-161162-174175-187188-200201-213214-226227-239240-252253-265ScrewDIN933[A]BandWidthmm[B]BandThicknessmm[C]TighteningTorqueNmScrewHeadA/F mm[D]M5 18 0.6 6 8M6 20 1 8 10M8 25 1.5 25 13M8 25 1.8 25 13Qty.PerBox1001001001001001009075757060504060524844363224242016161284228282814141414WeightPerBoxKgs2.82.93.13.23.37.36.75.75.86.05.04.43.611.810.910.79.17.27.35.65.95.04.34.43.82.514.210.210.210.56.06.06.36.3ADBCB<strong>Jubilee</strong> ® is a registered trade mark of L Robinson & Co (Gillingham) Limited.316 S/S Product – Please contact us for the full product specificationL Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
Wingspade ®SIZE / PACK GUIDEWorking DiameterSize No.Polybag(mm)Qty.WS129.5-1220WS1611-1620WS2013-2020WS2516-2520WS3220-3220WS4025-4020WS5032-5020WS6040-6020WS7050-7020Mild steel clips with their own spade for easy hand tighteningMaterial SpecificationBand/Screw/Housing:Wingspade:Colour:<strong>Jubilee</strong> Wingspade ® is a registered trade mark of L Robinson & Co (Gillingham) LimitedMild Steel Zinc ProtectedAcetal PlasticBlue (For colours other than blue, minimum order quantity 10000 per size)This product range ismanufactured to DINStandard and has aplastic spade for easeof use.Wingspades aretypically used ongarden hoses anddomestic applicationswhere there is arequirement forfrequent tightening/loosening on lowtorque applications;mainly for thehardware market.The range starts from9.5mm and extendsthrough to 70mm.Mild steel zincprotected clips only.L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
<strong>Jubilee</strong> Ä Standard Range <strong>Clips</strong>Just one Concept - Thousands of UsesMild Steel Zinc Protected / 304 Stainless Steel / 316 Stainless SteelKitemarked to BS 5315 : 1991 and manufactured under a BS EN ISO 9001:2008 quality systemaccepted by the British Standards Institution. Used on most day to day requirements for joining hosein industries such as motor, general engineering, hardware etc. <strong>Jubilee</strong> stainless is used in the foodindustry (where a high standard of hygiene is required), the chemical industry (where corrosive acidsare present) and the marine market (where salt intrusion causes high corrosion). <strong>Jubilee</strong> stainless isalso Lloyd’s Register Approved. Size range from 9.5 to 318mm ( 3 /8 to12Å”).<strong>Jubilee</strong> Ä High TorqueAll Stainless Steel ConstructionHigh Torque clips are used on heavy duty rubber and high pressure hoses. They compare inapplication to our Superclamp and can be tightened to twice the normal hose clip tightening torque.Ideal for high vibration applications and where the general British Standard product is not suitable.Size range from 20 to 500mm.‘O’ <strong>Clips</strong> from <strong>Jubilee</strong> Ä with Pincers (normal and side closing)Mild Steel Zinc Plated / 304 Stainless SteelA medium pressure 2-ear clamp widely used for maintenance and OEM applications. The clamps areinstalled on air, fluid, gas and steam lines and are also suitable for low pressure hydraulicapplications. The pincers are used to crimp the ears of the clamps and affect a proper seal. Sizerange from 3.1 to 46mm.<strong>Jubilee</strong> Ä SuperclampsMild Steel Zinc Plated / 316 Stainless SteelHeavy duty bolt clamps for use on delivery hoses and demanding applications. A single nut and boltis used to adjust the diameter of the clamp. Size range from 17 to 265mm.<strong>Jubilee</strong> Ä Juniors (Nut & Bolt <strong>Clips</strong>)Zinc Plated Mild SteelSmall nut and bolt clips used mainly in the motor trade for securing petrol pipes, heater hoses andsmall bore applications etc. Manufactured in zinc plated mild steel with a standard 7mm hexagonheaded screw. Size range from 7 to 20mm.<strong>Jubilee</strong> Flexidriver Ä & <strong>Jubilee</strong> Clipdrivers ÄHigh precision tools specifically designed for efficient, rapid and easy adjustment of <strong>Jubilee</strong> clips totheir optimum torque. The invaluable Flexidriver with flexible shaft has been designed to reach allthose awkward places while the Clipdriver has a rigid shaft and is available in two lengths (95mm &160mm).more over…………..
<strong>Jubilee</strong> Ä Smart DispenserAvailable in Mild Steel Zinc Protected or Stainless SteelIncrease your sales of <strong>Jubilee</strong> clips with this smart visible display, keeps your stock tidy and readyfor sale. This stylish new display holds 540 <strong>Jubilee</strong> clips in both ’10 boxes’ and singly together withtwo invaluable Flexidrivers.<strong>Jubilee</strong> Ä Workshop PackAvailable in Mild Steel Zinc Protected or Stainless SteelVersatile, re-usable box; 8 compartments holding 143 assorted <strong>Jubilee</strong> mild steel clips (sizes 9.5 to40mm).<strong>Jubilee</strong> Ä Handy Pack & Clip DispenserAvailable in Mild Steel Zinc Protected or Stainless SteelThe Handy Pack (HP100) can be used as a point of sale dispenser, stores assortment pack or amobile stock pack; it has 10 individual compartments each holding a box of 10 clips. The ClipDispenser (CD100) is the ultimate point of sale for <strong>Jubilee</strong> clips, it holds loose clips, as well as anindispensable Flexidriver, on a strong wire frame and is easily re-stockable.Junior Assortment PackZinc Plated Mild SteelThe essential fastener pack for small bore hoses. 165 assorted <strong>Jubilee</strong> Juniors (nut and bolt clips)in a plastic re-usable box.‘O’ Clip Kits from <strong>Jubilee</strong> Ä (with/without Pincer)Mild Steel Zinc PlatedFlexible and convenient dispenser for the most popular size of double ear clips. The kit comescomplete with/without normal closing pincer and is ideal for the user who needs to have a selectionof different size clips available at all times. Holds 175 ‘O’ clips.<strong>Jubilee</strong> Ä MultibandCan’t find what you are looking for? A larger selection is available ……..Mild Steel Zinc Plated & Stainless SteelIdeal for emergency situations mainly in the heating and ventilation industries. Multiband iscontinuous banding which is cut to size and constructed using a housing/screw from the wide choiceavailable. Mild steel available in 11mm width and stainless steel available in both 11mm and 7mm.<strong>Jubilee</strong> Ö , <strong>Jubilee</strong> Flexidriver Ö , <strong>Jubilee</strong> Clipdriver Ö are registered trademarks of L Robinson & Co (Gillingham) <strong>Ltd</strong>.L Robinson & Co. (Gillingham) <strong>Ltd</strong>., Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.Tel: +44 (0)1634 281200 Fax: +44 (0) 1634 280101 Email: sales@jubileeclips.co.uk Website: www.jubileeclips.co.uk
Change language