TECHNISCHES DATENBLATT - ELTEN GmbH

MOTION Mid ESD S2TECHNICAL DATA SHEETMOTION MidESD S2761820BSz. 38-47LABELLING ACCORDING TO STANDARDIn accordance with EN ISO 20345 S2 SRC• Men’s safety boot, mid cutForm BFITFEATURESSLIP RESISTANCE: When it comes to slip resistance asdefined by EN ISO 20345, SRC signifies the best possiblerating a safety shoe can reach.AREAS OF APPLICATION• Indoors and outdoors• E.g. airports, airplane construction, automobilemanufacturing• No scratches from metal parts• Close to induction loops / metal detectors• Areas where exposure to moisture is expected (S2)• Areas where there is a risk of electrostatic discharge(ESDS/ESD)Design • Modern and sporty designFull, padded bellows tongue • Extremely comfortable• Prevents pressure points• Prevents penetration of dirtCollar padding • Extremely comfortable• Softly padded collar for good stability and firm supportin the shoeESD - Equipment • Suitable when working in areas subject to electrostaticdischarge and electrostatic protected areas (EPA)• Excellent conductivityELTEN GmbH | Ostwall 7-13 | D-47589 Uedem | phone +49 2825 8068 | e-mail service@elten.com | internet www.elten.com

MOTION Mid ESD S2FEATURESLow weight • Use of especially light textile materials• ComfortableNo metal or leather• Textile eyelets• Low weight• Suitable for work areas sensitive to metal• Does not trigger metal detectors• Use around induction loops is possibleUPPER MATERIALTextile material Cordura ® (hydrophobized) • Areas of application S2/S3• Synthetic material• Particularly resistant to wear and tear• Retains its shape• Tear-resistant• Water penetration/absorption in accordance withEN ISO 20345 S2• Quick drying• Abrasion resistant and lightFashmo microfibre (hydrophobized) • Areas of application S2/S3• Synthetic material• Particularly soft• Retains its shape• Tear-resistant• Water penetration/absorption in accordance withEN ISO 20345 S2• Quick drying• Abrasion resistant and lightLININGFabric lining • Climate-regulating• Good ventilation• Skin-friendly• High absorption and emission of moistureHeel pocket lining • Abrasion-resistant microfibre material, sturdy• ComfortableTOE PROTECTION CAPComposite toe cap • Protection against impacts of min. 200 joules andpressure loading of min. 15 kN• Permanent edge coverage for cushioning• Ergonomically shaped• Comfortable toe-room• Good coverage of the little toe area• Low weight• 100% metal-free• 100% anti-magnetic• Weighs less than conventional steel capsELTEN GmbH | Ostwall 7-13 | D-47589 Uedem | phone +49 2825 8068 | e-mail service@elten.com | internet www.elten.com

MOTION Mid ESD S2INLAY SOLEESD inlay sole• The full-length, exchangeable inlay solewith ESD equipment provides thehighest possible comfort in a safetyshoe.• ESD-EQUIPMENT: The ELTEN ESD inlay sole isconductive and fulfils the EN ISO 20345 and DIN EN61340-4-3 standards for areas of electrostatic discharge.• Protection against electrostatic discharge (ESD)(Contact resistance 10 5 -10 7 Ohms)• OPTIMAL FOOT CLIMATE: High moisture absorption andrelease because of the PU foam's open cell structure. Sothe foot is always kept comfortably dry.• SHOCK-ABSORBING AND COMFORTABLE: The extremesoftness of the PU foam absorbs shocks on impact andincreases walking comfort.• ODOUR NEUTRALISING: Activated coal reduces thedevelopment of unpleasant odours in the shoe.• ANTIBACTERIAL: Activated coal prevents thedevelopment and spreading of fungi and other bacteria.• BREATHABLE: Improvement of the shoe climate becauseof the PU foam's open cell structure.INSOLEESD soft-fleece insole • ESD-equipment• Protection against electrostatic discharge (ESD), evenwhen 100% dry, and without the need for additional aidsto provide a bridge to the outsole• Approx. 50% lighter than comparable soles made ofnatural materials• Flexible and shape-retaining• Good air permeability• Excellent wear resistance• High moisture absorption• Quick drying (virtually overnight)OUTSOLETRAINERS double-densitysole with profileOutsole: TPU(thermoplasticpolyurethane)• Colour combination matches upper• Antistatic• Optimal slip resistance• Colour: matches upper• Particularly abrasion-resistant• Heat-resistant to approx. 130°C,flexible at cold temperatures to approx. -30°C• Oil and fuel resistantMidsole: PU • The soft PU core provides a good impact absorption andhigh wearing comfortELTEN GmbH | Ostwall 7-13 | D-47589 Uedem | phone +49 2825 8068 | e-mail service@elten.com | internet www.elten.com