Terra Catalogue - Matchmaster

14SAT IF distribution system5 cable systemTaps and splitter• 2 way splitter and one way tapsof 4 SAT+1 terrestrial signals• low losses• DC pass through H trunk lines;switchable DC pass to tap H outputs• accepts central pin ∅ 1.2 mm max.SS504SS5152 way splitter 1 way 15 dB tapSS510SS5201 way 10 dB tap 1 way 20 dB tapTechnical specificationsT Y P E SS504 SS510 SS515 SS520Ordering number 01747 01748 01749 01750Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzThrough loss SAT IF 4 dB 1.5 dB 1.1 dB 0.7 dBTerr. TV 4 dB 1.5 dB 1.2 dB 1 dBTap loss SAT IF 4 dB 8 ÷ 12 dB 13 ÷ 17 dB 18 ÷ 22 dBTerr. TV 4 dB 10 dB 15 dB 20 dBSAT inputs decoupling SAT IF 30 dBTerr. TV30 dBDC pass through2 A max.Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)120x120x34 mm/0.3 kg4 way splitter• 4 way splitter of 4 SAT+1 terrestrial TV signals• DC pass through H trunk lines;switchable DC pass to tap H outputs• accepts central pin ∅ 1.2 mm max.Technical specificationsT Y P ESSQ508Ordering number 01751Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzThrough loss SAT IF 8 dBTerr. TV8 dBSAT inputs decoupling SAT IF 30 dBTerr. TV30 dBDC pass through2 A max.Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)254x120x34 mm/0.4 kg

SAT IF distribution system5 cable systemLaunch and line amplifiers15• for compensation of through losses ofmultiswitches and interconnection cablesin 5 cable distribution systems• cascadable with 5 cable system components:taps, splitters and multiswitches• signal level control at all inputs• built-in adjustable equalizer and push-pullamplifier on terrestrial TV line• fixed 7 dB (5 dB for SA502, except SA503)slope precorrection on SAT IF linesSA501, SA502, SA503launch amplifiers for amplifying of 4 SAT IF andterrestrial TV signals; built-in switch-mode powersupply allows to feed: 18 V DC via H inputs and14 V DC via V inputs to up lines; 18 V DC (switchable)via H outputs and 14 V DC via V outputs to down lines;12 V DC via Terr. TV input (switchable)SA501 - medium gain 22 dB, with slopeSA503 - medium gain 22 dB, without slopeSA502 - high gain 33 dB, with slopeSA511line amplifier for amplifying of 4 SAT IF andterrestrial TV signals; in line powering through H lines;DC pass through H and V lines (switchable through H lines);12 V feeding via Terr. TV input (switchable)Technical specificationsT Y P E SA501 SA502 SA503 SA511Ordering number 01740 01774 01790 01741Frequency range SAT IF 950-2400 MHzTerr. TV47-862 MHzGain SAT IF, adjustable 15-22 dB (0 ÷ -10 dB) 28-33 dB (0 ÷ -10 dB) 22 dB (0 ÷ -10 dB) 15-22 dB (0 ÷ -10 dB)Terr. TV, adjustable 17 dB (0 ÷ -20 dB) 32 dB (0 ÷ -20 dB) 17 dB (0 ÷ -20 dB)Slope SAT IF, fixed 7 dB 5 dB - 7 dBTerr. TV, adjustable0 ÷ -15 dBIsolation SAT/SAT 30 dBSAT/Terr. TV30 dBNoise figure, typical ≤ 9 dB < 8 dB ≤ 9 dBOutput level IMD3=60 dB(DIN45004B) Terr. TV 112 dBµV 116 dBµV 112 dBµVOutput level IMD3=35 dB (EN50083-3) SAT IF 114 dBµV 116 dBµV 114 dBµVExternal equipment through V lines 14 V 0.6 A max. -powering through H lines 18 V 2 A max. (switchable) -through Terr line 12 V 0.1 A max. (switchable) -DC pass through, switchable through H lines2 A max.Power consumption 230 V~ 50 Hz 7 W* 230 V~ 50 Hz 8 W* 230 V~ 50 Hz 7 W* DC 9-18 V 4 W**Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 227x128x53mm/0.8 kg 170x128x53mm/0.53 kg* without external DC loading; with maximal external DC load - 57 W** in line powering of SA511 through H lines

16SAT IF distribution system5 cable systemApplication diagramsRadial installation for 36 subscribers.Installation of single multiswitch for two floors. 8 subscribers on every floor.AB010 - fixed gain UHF masthead amplifier, page 41MS553 - through line 5x4 multiswitch, page 9MSR532 - 5x32 multiswitch, page 11MSV508 - 5x8 multiswitch, page 12MSV516 - 5x16 multiswitch, page 12SA501 - launch amplifier, page 15SS515 - 1 way 15 dB tap, page 14SS520 - 1 way 20 dB tap, page 14

SAT IF distribution system5 cable systemApplication diagrams17Floor by floor installation powered from SA501.Floor by floor installation powered from external power supply on ground level.MSV504 - 5x4 multiswitch, page 12MSV508 - 5x8 multiswitch, page 12MSV512 - 5x12 multiswitch, page 12MSV516 - 5x16 multiswitch, page 12PS182F - power supply, page 37SA501 - launch amplifier, page 15SA511 - line amplifier, page 15SS510 - 1 way 10 dB tap, page 14

18SAT IF distribution system5 cable systemApplication diagramsFour entrances house, 2 floors house installation. Whole system powered from SA501.Long coridor house installation. Trunk line powered from SA501.Upper coridor line powered from SA501. Lower coridor line powered from MSR512.AB010 - fixed gain UHF masthead amplifier, page 41MSV508 - 5x8 multiswitch, page 12MSV512 - 5x12 multiswitch, page 12MSR512 - 5x12 multiswitch, page 10SA501 - launch amplifier, page 15SA511 - line amplifier, page 15SS515 - 1 way 15 dB tap, page 14SS510 - 1 way 10 dB tap, page 14SS520 - 1 way 20 dB tap, page 14SSQ508 - 4 way splitter, page 14

SAT IF distribution system9 cable systemCascadable multiswitches19• cascadable distribution system of 8 SAT polaritiesand terrestrial TV for floor by floor installationand/or star distribution• economical power using concept - no DC powerconsumption from line; subscriber lineis powered from a corresponding receiver• possibility to supply DC for LNBs through end linemultiswitch MS952;MS952 makes 14V from external 18V source• passive terrestrial TV path allows to receive terrestrialTV programs without switching on SAT TV receiver• depending on interconnection cable up to 5multiswitches can be connected into cascadewithout using a compensation amplifier• ready for return path operation• high isolation between all outputs• recommended power supply - PS182F (page 37)MS951through line 9x4 multiswitchMS952end line 9x4 multiswitchTechnical specificationsT Y P E MS951 MS952Ordering number 01725 01726Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzTap gain SAT IF 3 dBTerr. TV-19 dBMaximal output level for SAT IF circuitIMD3=30 dB (EN50083-3)93 dBµVSAT inputs decoupling> 30 dBOutputs decoupling SAT IF > 30 dBTerr. TV> 30 dBThrough gain SAT IF -3 dB -Terr. TV -3.5 dB -DC pass through 1 A max. -DC pass from external through V lines - 14 V & 0.5 A max.18V power supply through H lines - 18 V & 1 A max.Current consumption from receiver< 60 mA max.Control signals 14/18 V, 0/22 kHz, tone burst or DiSEqC 2.0Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 199x106x34mm/0.4 kg 199x106x34mm/0.37 kg

22SAT IF distribution system9 cable systemRemotely powered multiswitches• for large installations of SAT IF distribution systems• in line powering through H lines• length of the subscriber line up to 80 metres• 4 gain regulators* for SAT IF andseparate regulator for terrestrial TV• optimized for operation with terrestrialdigital/analog signals• active terrestrial TV path is powered from central powersupply allows to receive terrestrial TV programs withoutswitching on SAT TV receiver• LED indication of 18 V line powering• possibility of supply powering for LNBsequipment from external +18V power supply unit:recommended power supply - PS182F (page 37)MSV9089x8 multiswitchMSV9129x12 multiswitchMSV9169x16 multiswitchTechnical specificationsT Y P E MSV908 MSV912 MSV916Ordering number 01770 01771 01772Number of outputs 8 12 16Frequency range SAT IF 950-2400 MHzTerr. TV47-862 MHzGain SAT IF outputs 1-4 7 ÷ 12 dB(fixed slope outputs 5-8 6 ÷ 10 dBpre-correction) outputs 9-12 - 5 ÷ 8 dBoutputs 13-16 - 4 ÷ 6 dBTerr. TV outputs 1-4 3 ÷ 7 dBoutputs 5-82 ÷ 5 dBoutputs 9-12 - 1 ÷ 3 dBoutputs 13-16 - 0 ÷ 1 dBGain adjustment SAT IF* 10 dBTerr. TV17 dBOutput level for SAT IF (IMD3=35 dB)93 dBµVOutput level for Terr. TV outputs 1-4 91 dBµV(DIN45004B) outputs 5-8 89 dBµVoutputs 9-12 - 87 dBµVoutputs 13-16 - 85 dBµVSAT inputs decoupling> 25 dBOutputs decoupling SAT IF > 25 dBTerr. TV> 30 dBCurrent consumption from receiver< 160 mA max.Current consumption from inputs H linesor from external power supply+12 V 100 mA ÷ +18 V 70 mA max.Control signals14/18 V, 0/22 kHz, tone burst or DiSEqC 1.0, DiSEqC 2.0 or compatible versionsOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 170x128x53 mm/0.58 kg 210x128x53 mm/0.68 kg 250x128x53 mm/0.78 kg* synchronic adjustment for high and low band inputs

SAT IF distribution system9 cable systemRemotely powered multiswitches23• for large installations of SAT IF distribution systems• in line powering through H lines• length of the subscriber line up to 80 metres• 4 gain regulators* for SAT IF andseparate regulator for terrestrial TV• optimized for operation with terrestrialdigital/analog signals• active terrestrial TV path is powered from centralpower supply allows to receive terrestrialTV programs without switching on SAT TV receiver• LED indication of 18 V line powering• possibility of supply powering for LNBsequipment from external +18V power supply unit:recommended power supply - PS182F (page 37)MSV9249x24 multiswitchMSV9329x32 multiswitchTechnical specificationsT Y P E MSV924 MSV932Ordering number 01781 01782Number of outputs 24 32Frequency range SAT IF 950-2400 MHzTerr. TV47-862 MHzGain SAT IF outputs 1-8 2 ÷ 6 dB(fixed slope outputs 9-16 1 ÷ 4 dBpre-correction) outputs 17-24 0 ÷ 2 dBoutputs 25-32 - -1 ÷ 0 dBTerr. TV outputs 1-8 -1 ÷ 3 dBoutputs 9-16-2 ÷ 1 dBoutputs 17-24-3 ÷ 0 dBoutputs 25-32 - -4 ÷ -2 dBGain adjustment SAT IF* 10 dBTerr. TV17 dBOutput level for SAT IF (IMD3=35 dB)93 dBµVOutput level for Terr. TV outputs 1-8 91 dBµV(DIN45004B) outputs 9-16 89 dBµVoutputs 17-2487 dBµVoutputs 25-32 - 85 dBµVSAT inputs decoupling> 25 dBOutputs decoupling SAT IF > 25 dBTerr. TV> 30 dBCurrent consumption from receiver< 170 mA max.Current consumption from inputs H linesor from external power supply+12 V 100 mA ÷ +18 V 70 mA max.Control signals14/18 V, 0/22 kHz, tone burst or DiSEqC 1.0, DiSEqC 2.0 or compatible versionsOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 251x128x53 mm/0.9 kg 291x128x53 mm/1.04 kg* synchronic adjustment for high and low band inputsAccess mode control unit PC101Control unit PC101 allows to change the access mode of multiswitches MSR908-MSR932, MSV908-MSV932 bychanging reaction of the multiswitches to receiver’s control commands (analog 14/18 V / 0/22 kHz and DiSEqC 1.0/2.0).Two modes are available:1. Default mode (access to SAT A, SAT B by DiSEqC commands, access to SAT A by analog commands;2. Restricted mode (access to SAT B only by analog or DiSEqC commands).Ordering number 01773

24SAT IF distribution system9 cable systemTaps and splitter• 2 way splitter and one way tapsof 8 SAT+1 terrestrial signals• low losses• switchable DC pass to tap H outputs• accepts central pin ∅ 1.2 mm max.SS904SS9152 way splitter 1 way 15 dB tapSS910SS9201 way 10 dB tap 1 way 20 dB tapTechnical specificationsT Y P E SS904 SS910 SS915 SS920Ordering number 02710 02711 02712 02713Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzThrough loss SAT IF 4 dB 1.7 dB 1.2 dB 0.9 dBTerr. TV 4 dB 1.6 dB 1.2 dB 1 dBTap loss SAT IF 4 dB 8 ÷ 12 dB 13 ÷ 17 dB 18 ÷ 22 dBTerr. TV 4 dB 10 dB 15 dB 20 dBSAT inputs decoupling SAT IF 30 dBTerr. TV30 dBDC pass through2 A max.Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)120x120x51 mm/0.4 kg4 way splitter• 4 way splitter of 8 SAT+1 terrestrial TV signals• switchable DC pass to tap H outputs• accepts central pin ∅ 1.2 mm max.Technical specificationsT Y P ESSQ908Ordering number 02714Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzThrough loss SAT IF 8 dBTerr. TV8 dBSAT inputs decoupling SAT IF 30 dBTerr. TV30 dBDC pass through2 A max.Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)254x120x51 mm/0.8 kg

SAT IF distribution system9 cable systemLaunch and line amplifiers25• for compensation of through losses ofmultiswitches and interconnectioncables in 9 cable distribution systems• cascadable with multiswitches MS951, MS952and other 9 cable system components• signal level control at all inputs• built-in adjustable equalizer andpush-pull amplifier on terrestrial TV line• fixed 7 dB slope precorrection on SAT IF linesSA901launch amplifier for amplifying of 8 SAT IF and terrestrialTV signals; built-in switch-mode power supply allows tofeed: 18 V DC via H inputs and 14 V DC via V inputs toup lines; switchable 18 V DC via H outputs to downlines; 12 V DC via Terr. TV input (switchable)SA911line amplifier for amplifying of 8 SAT IF andterrestrial TV signals; in line powering through H lines;DC pass through H and V lines (switchable through H lines);12 V feeding via Terr. TV input (switchable)Technical specificationsT Y P E SA901 SA911Ordering number 01742 01743Frequency range SAT IF 950-2400 MHzTerr. TV47-862 MHzGain SAT IF 15-22 dB (0 ÷ -10 dB adjustable)Terr. TV17 dB (0 ÷ -17 dB adjustable)Slope SAT IF 7 dB(fixed)Terr. TV0 ÷ -15 dB (adjustable)Isolation SAT/SAT 30 dBSAT/Terr. TV30 dBNoise figure, typical≤ 9 dBOutput level IMD3=60 dB (DIN45004B)112 dBµV (for terrestrial TV)Output level IMD3=35 dB (EN50083-3)114 dBµV (for SAT IF)External equipment through V lines 14 V (14 V+12 V 0.5 A max.) -powering through H lines 18 V 2 A max. (switchable) -through Terr line 12 V 0.1 A max. (switchable) -DC pass through, switchable through H lines2 A max.Power consumption 230 V~ 50 Hz 11 W* DC 9-18 V 6 W **Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 291x128x53 mm/1 kg 234x128x53 mm/0.75 kg* without external DC loading; with maximal external DC load - 57 W** in line powering of SA911 through H lines

26SAT IF distribution system9 cable systemApplication diagramsRadial installation for 36 subscribers.Installation of single multiswitch for two floors. 8 subscribers on every floor.AB010 - UHF masthead amplifier, page 41MS951 - through line 9x4 multiswitch, page 19MSV908 - 9x8 multiswitch, page 22MSV912 - 9x12 multiswitch, page 22MSV916 - 9x16 multiswitch, page 22MSR932 - 9x32 multiswitch, page 21SA901 - launch amplifier, page 25SS915 - 1 way 15 dB tap, page 24SS920 - 1 way 20 dB tap, page 24

SAT IF distribution system9 cable systemApplication diagrams27Floor by floor installation powered from SA901.Floor by floor installation powered from external power supply on ground level.MS951 - through line 9x4 multiswitch, page 19MSV908 - 9x8 multiswitch, page 22MSV912 - 9x12 multiswitch, page 22MSV916 - 9x16 multiswitch, page 22PS182F - power supply, page 37SA901 - launch amplifier, page 25SA911 - line amplifier, page 25SS910 - 1 way 10 dB tap, page 24

28SAT IF distribution system9 cable systemApplication diagramsFour entrances house, 2 floors house installation. Whole system powered from SA901.AB010 - UHF masthead amplifier, page 41MSV908 - 5x8 multiswitch, page 22SA901 - launch amplifier, page 25SS915 - 1 way 15 dB tap, page 24SS920 - 1 way 20 dB tap, page 24SSQ908 - 4 way splitter, page 24

SAT IF distribution system9 cable systemApplication diagrams29Long coridor house installation. Trunk line powered from SA901.Upper coridor line powered from SA901. Lower coridor line powered from MSR916.MSV912 - 9x12 multiswitch, page 22MSV916 - 9x16 multiswitch, page 22MSR916 - 9x16 multiswitch, page 20SA901 - launch amplifier, page 25SS904 - 2 way splitter, page 24SS910 - 1 way 10 dB tap, page 24

30SAT IF distribution system13 cable systemCascadable multiswitches• cascadable distribution system of 12 SAT polaritiesand terrestrial TV for floor by floor installationand/or star distribution• economical power using concept - no DC powerconsumption from line; subscriber lineis powered from a corresponding receiver• possibility to supply DC for LNBs through end linemultiswitch MS1352;MS1352 makes 14V from external 18V source• passive terrestrial TV path allows to receive terrestrialTV programs without switching on SAT TV receiver• depending on interconnection cable up to 5multiswitches can be connected into cascadewithout using a compensation amplifier• ready for return path operation• high isolation between all outputs• recommended power supply - PS182F (page 37)MS1351through line 13x4 multiswitchMS1352end line 13x4 multiswitchTechnical specificationsT Y P E MS1351 MS1352Ordering number 01754 01755Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzTap gain SAT IF 1 dBTerr. TV-19 dBMaximal output level for SAT IF circuitIMD3=30 dB (EN50083-3)90 dBµVSAT inputs decoupling> 30 dBOutputs decoupling SAT IF > 30 dBTerr. TV> 30 dBThrough gain SAT IF -3 dB -Terr. TV -3.5 dB -DC pass through SAT input-output 1 A max. -DC pass from external through V lines - 14 V & 1 A max.18 V power supply through H lines - 18 V & 1 A max.Current consumption from receiver< 90 mAControl signalsDiSEqC 2.0 or lower versionOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 232x106x53 mm/0.7 kg 232x106x53 mm/0.65 kg

SAT IF distribution system17 cable systemCascadable multiswitches31• cascadable distribution system of 16 SAT polaritiesand terrestrial TV for floor by floor installationand/or star distribution• economical power using concept - no DC powerconsumption from line; subscriber lineis powered from a corresponding receiver• possibility to supply DC for LNBs through end linemultiswitch MS1752;MS1752 makes 14V from external 18V source• passive terrestrial TV path allows to receive terrestrialTV programs without switching on SAT TV receiver• depending on interconnection cable up to 5multiswitches can be connected into cascadewithout using a compensation amplifier• ready for return path operation• high isolation between all outputs• recommended power supply - PS182F (page 37)MS1751through line 17x4 multiswitchMS1752end line 17x4 multiswitchTechnical specificationsT Y P E MS1751 MS1752Ordering number 01752 01753Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzTap gain SAT IF 1 dBTerr. TV-20 dBMaximal output level for SAT IF circuitIMD3=30 dB (EN50083-3)90 dBµVSAT inputs decoupling> 30 dBOutputs decoupling SAT IF > 30 dBTerr. TV> 30 dBThrough gain SAT IF -3 dB -Terr. TV -3.5 dB -DC pass through SAT input-output 1 A max. -DC pass from external through V lines - 14 V & 1 A max.18 V power supply through H lines - 18 V & 1 A max.Current consumption from receiver

32SAT IF distribution system17 cable systemCascadable multiswitch• through line 17x8 multiswitch• cascadable distribution system of 16 SAT polaritiesand terrestrial TV for floor by floor installationand/or star distribution• separate SAT IF gain adjustment for every pairof subscribers outputs• DC through path and multiswitch feedingfrom SAT A HLo, SAT A HHi linesOrdering number 01783Frequency range SAT IF 950-2400 MHzTerr. TV5-862 MHzGain, typical (fixed SAT IF outputs 1-4 -6 ÷ 0 dBslope pre-correction)* adjustable outputs 5-813 dB-7 ÷ -1 dBTerr. TV outputs 1-4 -8 ÷ -5 dBadjustable outputs 5-820 dBOutput level for SAT IF (IMD3=35 dB)-9 ÷ -7 dB100 dBµVOutput level for Terr. TV outputs 1-4 94 dBµV(DIN45004B) outputs 5-8 92 dBµVSAT inputs decouplingOutputs decoupling> 25 dB> 40 dBThrough gain SAT IF -6 dBTerr. TVDC pass through SAT input-outputCurrent consumption from receiverCurrent consumption from SAT A HLo, SAT A HHi linesControl signalsTechnical specificationsT Y P EOperating temperature rangeDimensions/Weight (packed)* max. gain on 2150 MHzMS17086 ÷ 8 dB max.1 A max. (through single line)90 mA max.18 V 80 mA ÷ 12 V 120 mADiSEqC 1.0, DiSEqC 2.0 or compatible versions-20 o ÷ + 50 o C190x190x55 mm/0.8 kg

SAT IF distribution system17 cable systemRadial multiswitches33• star distribution system of 16 SAT IF polaritiesand terrestrial TV signal up to 16 users• separate SAT IF gain adjustmentfor every pair of subscribers outputs• built-in power supply with possibilityof remote DC feeding for LNBs andother network components includingamplifiers inside terrestrial TV path• power supply has short-circuit andoverload protection with LED indicatorsMSR170817x8 multiswitchMSR171617x16 multiswitchTechnical specificationsT Y P E MSR1708 MSR1716Ordering number 01784 01785Number of outputs 8 16Frequency range SAT IF 950-2400 MHzTerr. TV47-862 MHzGain, typical SAT IF outputs 1-4 -6 ÷ 0 dB(fixed slope adjustable outputs 5-8 -7 ÷ -1 dBpre-correction)* 13 dB outputs 9-12 - -8 ÷ -2 dBoutputs 13-16 - -9 ÷ -3 dBTerr. TV outputs 1-4 -8 ÷ -5 dBadjustable outputs 5-8-9 ÷ -7 dB17 dB outputs 9-12 - -10 ÷ -9 dBoutputs 13-16 - -11 ÷ -11 dBOutput level for SAT IF (IMD3=35 dB)100 dBµVOutput level for Terr. TV outputs 1-4 94 dBµV(DIN45004B) outputs 5-8 92 dBµVoutputs 9-12 - 90 dBµVoutputs 13-16 - 88 dBµVSAT inputs decoupling> 25 dBOutputs decoupling> 40 dBRejection, SAT/Terr. TV≥ 30 dBOutput voltage through RF inputsH/Lo, H/Hi - 18 V; V/Lo, V/Hi - 14 VDC supply current +18V 2 A max. totalthrough RF inputs +14V 0.6 A max. total+12V 0.1 A max. -Current consumption from receiver90 mA max.Control signalsDiSEqC 1.0 , DiSEqC 2.0 or compatible versionsPower consumption**230 V~ 50 Hz 3.5 WOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 260x190x55mm/1.06 kg 360x190x55 mm/1.7 kg* max. gain on 2150 MHz** without external DC load; with maximal load 55 W

34SAT IF distribution systemSystem accessoriesSplitband amplifiers• for amplification signals of SAT and terrestrial TV bands• suitable for signals combining of SATand terrestrial TV bands• possibility of DC feeding for LNBsfrom external power supply• possibility of DC and DiSEqC signals pass• built-in separate gain & slope regulators for every band• die-cast housingSA100SAT IF amplifier with passive terrestrial TV pathHSA100SAT IF amplifier with active/passive terrestrial TV path,switchableHSA100R30SAT IF amplifier with active/passive terrestrial TV pathand 30 MHz passive return path, switchableHSA100R65SAT IF amplifier with active/passive terrestrial TV pathand 65 MHz passive return path, switchableTechnical specificationsT Y P E SA100 HSA100 HSA100R30 HSA100R65Ordering number 01777 01778 01779 01780Forward pathFrequency range SAT IF 950- 2400 MHzTerr. TV 5-862 MHz 47-862 MHz 87-862 MHzGain SAT IF 23-31 dB (pre-correction)Terr. TV -4 dB 21-24 dB (pre-correction)/-4 dB switchableGain adjustment SAT IF 10 dBTerr. TV* - 18 dBSlope adjustment SAT IF 14/8 dB switchableTerr. TV* - 18 dBInput and output return loss SAT IF ≥ 10 up to 1750 MHz, 1750-2400 MHz linear decrease from 10 dB up to 7 dBTerr. TV≥ 10 dBMaximal output levelSAT IFIMD3=35 dB (EN50083-3)120 dBµV (2 egual carriers)Maximal output level Terr. TV -IMD3=60 dB (DIN45004B)115 dBµVNoise figure SAT IF - 8 dBTerr. TV - 8 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHzLoss - -3 dBReturn loss - >14 dBGeneralMains power consumption 230 V~ 50 Hz 5 W 230 V~ 50 Hz 7.5 WTemperature range-20 o ÷ +50 o CDimensions185x91x47 mm/0.7 kg* terrestrial gain, slope adjustment and return path are not available at passive terrestrial TV modeSA100HSA100, HSA100R30, HSA100R65

SAT IF distribution systemSystem accessoriesSplitband amplifiers35• for amplification signals of SAT and terrestrial TV bands• possibility of DC and DiSEqC signals pass• built-in separate gain regulators for every band• die-cast housing inside plastic caseHSA001SAT IF amplifier with active terrestrial TV path,without return pathHSA001R3SAT IF amplifier with active terrestrial TV path,with 30 MHz passive return pathHSA001R6SAT IF amplifier with active terrestrial TV path,with 65 MHz passive return pathTechnical specificationsT Y P E HSA001 HSA001R3 HSA001R6Ordering number 01786 01787 01788Forward pathFrequency range SAT IF 950- 2400 MHzTerr. TV 47-862 MHz 87-862 MHzGain SAT IF 18-25 dB (pre-correction)Terr. TV14-18 dB (pre-correction)Gain adjustment SAT IF 10 dBTerr. TV15 dBInput and output return loss SAT IF ≥ 10 up to 1750 MHz, 1750-2400 MHz linear decrease from 10 dB up to 7 dBTerr. TV≥ 10 dBMaximal output levelSAT IFIMD3=35 dB (EN50083-3)115 dBµV (2 egual carriers)Maximal output levelTerr. TVIMD3=60 dB (DIN45004B)110 dBµVDC pass400 mA max.Return pathFrequency range - 5 - 30 MHz 5-65 MHzLoss - -4 dBReturn loss - >14 dBGeneralMains power consumption230 V~ 50 Hz 4 WTemperature range-20 o ÷ +50 o CDimensions133x73x39 mm/0.36 kg

36SAT IF distribution systemSystem accessoriesMasthead productsLine amplifier SA002• for recovering of signal loss inSAT IF distribution networks• DC and tone pass through• for outdoor mountingDiplexer DC010• for combining of SAT IF and terrestrial TV signals• DC and tone pass through to SAT TV input• for outdoor mountingDiplexer DC014• for combining of SAT IF andterrestrial TV signals with built in DC switch• allows to feed terrestrial TV preamplifier frompower supply PI011 (page 43) when SAT STBis switched off• built-in short circuit proof for terrestrial TV• DC and tone pass through to SAT TV input• for outdoor mountingTechnical specificationsT Y P E SA002 DC010 DC014Ordering number 01791 02556 02557Frequency range 950-2400 MHz 47-862 MHz/950-2400 MHzAttenuation in the stop-band 18 dB 25 dBGain Terr/SAT - / 6.5 ÷ 10 dB - 2 / -2.5 dBNoise figure, typical ≤ 7 dB - -Maximal output level IMD3=35 dB (EN50083-3) 104 dBµV - -DC pass Terr/SAT - / 0.5 A max. 0.1 / 0.4 A max.Current consumption +12 ÷ +18 V 35 mA - +10 ÷ +18 V 20 mADimensions/Weight (packed)89x107x43mm/0.18 kgDual DC feeding for antennas equipment:1. SAT STB is switched on -for LNB & terrestrial preamplifier DC feeding from STB2. SAT STB is switched off -DC feeding only for terrestrial preamplifier from power supply PI011, page 43DiSEqC controlled switches• metal housing inside and weather-capTechnical specificationsT Y P E TRU4508 TRU4518Ordering number 11796 11797Number of inputs 2 4Frequency range950-2300 MHzThrough loss2 dBCurrent consumption / Through pass10 mA / 0.5 A max.Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 97x101x23 mm/0.11 kg 97x101x23 mm/0.15 kg

SAT IF distribution systemSystem accessories37Line amplifier SA001• for recovering of signal loss inSAT IF distribution networks• DC and tone pass throughDiplexer DC009• for combining of SAT IF and terrestrial TV signals• DC and tone pass through to SAT TV inputPolarity/band switch PI010• for insertion 14 V/18 V / 0/22 kHz control signal• powered from line or external 18 V power supplyTechnical specificationsT Y P E SS001 SS002 SS003Ordering number 00704 00702 00703Frequency rangeGainNoise figureTechnical specificationsMaximal output level IMD3=35 dB (EN50083-3)Current consumptionT Y P E SA001 DC009 PI010Ordering number 00701 01543 01789Frequency range 950-2400 MHz 47-862 MHz/950-2400 MHz 950-2400 MHzAttenuation in the stop-band - 20 dB -Gain 17-22 dB - 1.5 dB - 1 dBNoise figure, typical ≤ 9 dB - -Maximal output level IMD3=35 dB (EN50083-3) 104 dBµV - -DC pass - - 0.3 A max.Current consumption +12 ÷ +18 V 60 mA - 14 V/18 V 30 mADimensions/Weight (packed) 79x40x24mm/0.06 kg 53x64x24mm/0.07 kg 53x64x24mm/0.07 kgActive SAT IF splitters• DC and tone through pass• high outputs isolationSS0012 way active splitterSS0024 way active splitterSS0036 way active splitter950-2400 MHz-1 ÷3 dB≤ 10 dB94 dBµV+12 ÷ +18 V 20 mADimensions/Weight (packed) 79x40x24mm/0.07 kg 79x64x24mm/0.07 kg 79x64x24mm/0.08 kgPower supply• high efficiency 18 V & 2 Aswitch-mode power supplyTechnical specificationsT Y P EPS182FOrdering number 00626DC output+18 V 2 AOutput DC connectorF maleMains voltage180 V÷ 240 V~ 50 HzDimensions78x130x33 mmPower inserter• F female, 5-2400 MHz• I max. 1 AOrdering number 00797Link• F male-quick - F male-quick forinterconnection of the equipmentOrdering number 00933

38SAT IF distribution systemSystem accessoriesSimulation Software SatNetFreeware software for simulation of SAT IF distribution networks the latest versioncould be downloaded from www.terraelectronics.com, section downloads• significantly facilitates designing of complex satelliteIF distribution networks with TERRA components• component library includes all TERRA satellite IFproducts and is constantly updated when newproducts are available• accurateness of calculating allows to avoid preparingof invalid bill of materials, unreasonable estimatednetwork prices and consumed time for troubleshootingthe network during installation• user-friendly graphical interface• include “Path Loss Calculator” in the case if measuredinput levels are not available• realistically simulates action of controls if they are• have a useful tools for automatic positioning of controlsand navigating inside big network• easy to learn - short animated tutorial available1. Allowed complexity of network:- SAT IF trunk lines up to 16 (4 quatro LNB)- terrestrial path 1- subscribers points unlimited- comprihensive information about signal’s level on every nod- indication of overloaded components2. Results - indication of nods with lacking signal strength- total consumed current- report for network’s price estimation3. Memory occupied by software 12 MB (zipped)- 1 GHz CPU4. Minimum hardware requirements - VGA 768 by 1024 pixels- Windows 98/Windows XP or later version

Terrestrial TV productsMasthead productsDiplexers40• diplexers for combining signals from various antennas• shielded metal case inside plastic housing• for outdoor mounting• switchable DC feeding for preamplifier UHFTechnical specificationsT Y P E DC011 DC012 DC013Ordering number 02530 02531 02532Number of inputs 2 3 3Insertion loss FM (88-108 MHz)< 1 dBVHFI/II (47-88 MHz) < 1 dB < 1 dBVHFIII (174-260 MHz)< 2 dBUHF (470-862 MHz) < 2 dB < 2 dB < 5.5 dBInputs isolation > 45 dB > 25 dB > 40 dB*DC pass0.4 A max.Operating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)89x107x43 mm/0.18 kg* UHF inputs >15 dBTV band amplifiers• single input low noise preamplifiers• shielded metal case inside plastic housing• for outdoor mounting• DC feeding via output connectorTechnical specificationsT Y P E AB001 AB002 AB003 AB004 AB005Ordering number 02533 02534 02535 02536 02537Gain FM (88-108 MHz) - - - -VHFI (47-68 MHz) - - - -VHFIII (174-260 MHz) - - - 20 dB20 dBUHFIV (470-590 MHz) - - - -UHFV (614-862 MHz) - - - -UHF (470-862 MHz) 12 dB 12 dB 20 dB -Noise figure≤ 3 dBMaximal output level IMD3=60 dB (DIN45004B)104 dBµVInterstage gain control - 0 ÷ 10 dB -Return loss> 10 dBCurrent consumption 5 V 30 mA 12 V 30 mA 12 V 60 mAOperating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)89x107x43 mm/0.18 kg

Terrestrial TV productsMasthead productsMultiband amplifiers• for combination and balancingof the signals from 3 TV antennas• shielded metal case inside plastic housing• for outdoor mounting• switchable DC feeding for preamplifier UHF• built-in attenuators for every band• DC feeding via output connector41Technical specificationsT Y P E MA061 MA062 MA063 MA064 MA065 MA066Ordering number 02538 02539 02540 02541 02542 02543Gain FM (88-108 MHz) -28 dBVHFI (47-68 MHz) 16 dB 30 dB - 30 dB 16 dBVHFIII (174-260 MHz) 28 dB 28 dBUHFIV (470-606 MHz) - - - - - 22 dB*UHFV (638-862 MHz) - - - - - 22 dB*UHF (470-862 MHz) 2x20 dB 2x34 dB 2x34 dB 38 dB 38 dB -Number of inputs 3 3 3 2 3 3Noise figureVHF 6 dB; UHF 3 dBMaximal output level IMD3=60 dB (DIN45004B)104 dBµVGain controlVHF 0 ÷ -20 dB; UHF 0 ÷ -16 dBReturn loss> 10 dBDC for preamplifiers (switchable)** through UHF input through UHFV inputCurrent consumption*** 12 V 65 mA 12 V 80 mA 12 V 65 mAOperating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)89x107x43 mm/0.18 kg* UHFIV (470-590 MHz) UHFV (614-862 MHz) on request ** 12 V 60 mA max. *** without external DC loadingUHF band amplifiers• single input preamplifiers with extremely low noise figure• shielded metal case inside plastic housing• for outdoor mounting• DC feeding via output connector(AB012 powered via any output)AB01015 dB fixed gain UHF masthead amplifierAB01127 dB switchable gain UHF masthead amplifierAB01222 dB switchable gain UHF masthead amplifierand three RF isolated outputsTechnical specificationsT Y P E AB010 AB011 AB012Ordering number 02544 02545 02546Frequency range470-862 MHzGain 15 dB 27 dB 22 dBNumber of inputs 1 1 1Number of outputs 1 3Noise figure 0.8 dB ≤ 1 dBMaximal output level IMD3=60 dB (DIN45004B) 98 dBµV 108 dBµV 103 dBµVInterstage gain control - 13 dB, switchable 15 dB, switchableReturn loss> 10 dBCurrent consumption 4.5 V ÷ 12 V 30 mA 4.5 V ÷ 12 V 60 mAOperating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)89x107x43 mm/0.18 kg

Terrestrial TV productsApartment amplifiersWide band amplifier42• built-in switchable gain regulator• DC feeding for preamplifiers,with three outputs• die-cast housing inside plastic case• built-in power supplyTechnical specificationsT Y P EAS037POrdering number 02516Frequency range47-862 MHzOutputs number 3Gain11 dB/47 MHz; 14 dB/862 MHzGain, switchable0 ÷ -12 dB by 4 dB stepMaximal output level IMD3=60 dB (DIN45004B)100 dBµV*Input and output return loss>10 dBNoise figure< 5 dBDC feeding for external5.5 V 60 mA max.Power consumption**230 V~ 50 Hz 3 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)133x63x39 mm/0.36 kg* when loaded output** with maximal external current loadingSplitband amplifiers• splitband amplifiers with separategain adjustment in VHF and UHF rangesand DC feeding for preamplifiers• die-cast housing inside plastic case• built-in power supplyHS016Pamplifier with two outputsHS017Pamplifier with four outputsHS018Pamplifier with two outputs;with low VHF gainHS019Pamplifier with four outputs;with low VHF gainTechnical specificationsT Y P E HS016P HS017P HS018P HS019POrdering number 02552 02553 02554 02555Frequency range47-240, 470-862 MHzOutputs number 2 4 2 4Gain (fixed slope pre-correction) 20-22 dB, 20-22 dB 18-20 dB, 18-20 dB 10-12 dB, 20-22 dB 8-10 dB, 18-20 dBGain adjustmentVHF 15 dB, UHF 12 dBMaximal output level IMD3=60 dB (DIN45004B) 104 dBµV 100 dBµV 104 dBµV 100 dBµVInput and output return loss> 10 dBNoise figureVHF < 4.5 dB, UHF 16 dBDC feeding for external12 V 0.1 A max.Power consumption*230 V~ 50 Hz 3.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)133x73x 39 mm/0.26 kg* with maximal external current loading

Terrestrial TV productsApartment amplifiersSplitband amplifiersHS013• splitband amplifier (1 input, 2 outputs) withswitchable remote DC feeding through RF input• separate gain adjustments in VHF and UHF bands• built-in short circuit proofMA051• double band amplifier (2 inputs, 2 outputs) withswitchable remote DC feeding through UHF input• separate gain adjustments in VHF and UHF bands• built-in short circuit proofTechnical specificationsT Y P E HS013 MA051Ordering number 01588 00551Frequency range 47-400/470-862 MHz (47-400 MHz)+(470-862 MHz)Gain22 dB* (adjustable VHF 0 ÷ -15 dB, UHF 0 ÷ -12 dB)Maximal output level IMD3=60 dB (DIN45004B)105 dBµV*Maximal output level IMD2=60 dB (EN50083-3)95 dBµVNoise figureVHF < 4.5 dB, UHF < 3 dBDC feeding for external12 V 0.1 A max.Power consumption**230 V~ 50 Hz 4 WDimensions/Weight (packed)78x118x47 mm/0.36 kg* 1 output loaded; when 2 outputs loaded: gain - 20 dB, output level - 103 dBµV ** without external DC loading43Supplements for masthead productsPower supplies• power supplies for remote DC feeding throughRF input with various quantities of outputs• DC and tone pass (PI011 only)• die-cast housing inside plastic case• built-in short circuit proofTechnical specificationsT Y P E PI007 PI008 PI009 PI011Ordering number 02547 02548 02549 02559Frequency range 47-862 MHz 47-2150 MHzLoss 0.5 dB (1 RF output) 4 dB (2 RF isolated outputs) 8 dB (4 RF isolated outputs) 2 dB (1 RF output)DC feeding for external 12 V 0.1 A max. 11.5 V 0.1 A max.DC pass - 12 V ÷ 18 V 0.5 A max.Power consumption230 V 50 Hz 4 WDimensions/Weight (packed)133x63x39 mm/0.36 kgZS12/100G• stabilized power supplywith DC inserter & IEC plugZS12/250F• stabilized power supplywith power inserter, F socket - F socketTechnical specificationsT Y P E ZS12/100G ZS12/250 FOrdering number 10612 00624DC output +12 V 0.1 A +12 V 0.25 AFrequency range - 45-862 MHzAttenuation - 1 dBOutput connector IEC FMains voltage220 V~ 50 HzDimensions 32x76x50 mm 57x81x49 mm

Terrestrial TV productsHouse amplifiersHigh power splitband amplifier44• splitband amplifier with separategain & slope adjustments in VHF & UHF ranges• possibility of DC feeding for external equipmentthrough RF input port• die-cast housing for indoor mounting• output test point and screw terminalfor equipotential bonding• built-in power supplyTechnical specificationsT Y P EHS200Ordering number 10504Frequency range VHF UHF47-422 MHz 470-862 MHzGain 43-49 dB 49-55 dBFlatness± 1 dBGain control attenuator 0 ÷ -20 dB 0 ÷ -18 dBswitch 0/-10 dB 0/-10 dBSlope adjustment 18 dB 8 dBMaximal output level IMD3=60 dB (DIN45004B) 118 dBµV 121 dBµVInput and output return loss>10 dBNoise figure< 6 dBTest point-30 dBDC feeding for external, switchable12 V 0.1 A max.Power consumption*230 V~ 50 Hz 10 WOperating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)265x175x60 mm/1.1 kg* with external DC loadingHS200

Terrestrial TV productsMedium power multiband amplifiersUp to 4 inputs amplifiers• splitband amplifier for combination andbalancing of the signals from 4 TV antennas• protection and indication of DC overload• built-in attenuators for every band• DC feeding for preamplifiers throughUHF switchable input• die-cast housing inside plastic case45Technical specificationsT Y P E MA046 MA047Ordering number 02550 02551Gain VHFI/II (47-108 MHz) 30 dBVHFIII (174-230 MHz)30 dBUHFIV/V (470-862 MHz) 2 x 33-35 dB 33-35 dBNumber of inputs 4 3Noise figureVHF

Terrestrial TV productsMedium power multiband amplifiersUp to 4 inputs amplifiers46• for combination and balancingof the signals up to 4 TV antennas• protection and indication of DC overload• built-in attenuators for every band• switchable DC feeding for preamplifiers through all inputsand separate DC output via 2.1/5.5 mm socket• built-in test point• metal-plastic housingTechnical specificationsT Y P E MA021 MA024 MA025 MA026Ordering number 10557 10558 10559 10560Gain VHFI+FM (47-108 MHz) 30 dB 30 dB 30 dB -VHFIII (174-230 MHz) 30 dB 30 dB 22 dB/30 dB*UHF (470-862 MHz) 30 dB 2x34 dB 30 dB 2x34 dBNumber of inputs 2 4 3 4Noise figureVHF < 5 dB; UHF < 7 dBMaximal output level IMD3=60 dB (DIN45004B)115 dBµVGain control0 ÷ -20 dBReturn loss> 10 dBDC feeding for external12 V 0.1 A max.Power consumption**230 V~ 50 Hz 9 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)201x128x53 mm/0.77 kg* two inputs of different gain** without external DC loadingUp to 6 inputs amplifiers• protection and indication of DC overload• switchable DC feeding for preamplifiers through all inputsand separate DC output via 2.1/5.5 mm socket• built-in test point• metal-plastic housingTechnical specificationsT Y P E MA011 MA012 MA013 MA014 MA015 MA016 MA017Ordering number 10549 10550 10551 10552 10553 10554 10556Gain VHFI (47-68 MHz) 30 dB 40 dB 30 dBFM (88-108 MHz) 30 dB 40 dB 30 dB40 dB 30 dB 30 dB 30 dBVHFIII (174-230 MHz) 30 dB 40 dB 30 dB 40 dB 30 dB 22/30 dB* 22/30 dB*UHFIV (470-606 MHz) 34 dB - - 44 dB 34 dB - 34 dBUHFV (638-862 MHz) 34 dB - - 44 dB 34 dB - 34 dBUHF (470-862 MHz) 34 dB 2x44 dB 2x34 dB 44 dB 34 dB 2x34 dB 34 dBNumber of inputs 6 5 5 5 5 5 6Noise figureVHF < 5 dB; UHF < 7 dBMaximal output level IMD3=60 dB (DIN45004B)115 dBµVGain control (every band)0 ÷ -20 dBReturn loss> 10 dBDC feeding for external12 V 0.1 A max.Power consumption*230 V~ 50 Hz 12 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)243x128x53mm/0.85 kg* with external DC loading

Terrestrial TV productsHigh power multiband amplifiersUp to 5 inputs amplifiers47• splitband FM+VHF and UHF amplifiers• gain level control with interstage amplifiers and attenuators• protection and indication of DC overload• switchable +12 V DC feeding for preamplifiers through all inputs*• built-in test point• die-cast housingTechnical specificationsT Y P E MA201 MA202 MA203Ordering number 10500 10501 10502GainFM (88-108 MHz)30 dB30 dBVHFI (47-68 MHz)40 dB40 dBVHFIII (174-260 MHz) 40 dB 40 dB 40 dBUHF (470-862 MHz) 47 dB 2x47 dB 3x47 dBUHFV (614-862 MHz) 47 dB - -UHFIV (470-590 MHz) 47 dB - -Number of inputs 5 5 5Noise figureVHF < 5 dB; UHF 10 dBTest point-30 dBDC feeding for external12 V 0.1 A max.Power consumption**230 V~ 50 Hz 9.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)265x175x60 mm/1.1 kg* version with 24 V feeding for preamplifiers under reguest** with external DC loading

Terrestrial TV productsMultichannel headendTwin TV channel amplifier48• twin TV channel amplifier tunable in all UHF range• SAW filters provide a high selectivity processingof digital and analog channels• each section has a built-in AGC system andan independent regulator of output level• output signal level indication allows toaccelerate the search of fault• digital indication setting of output level• built-in indicators and push buttons allowoperatively to set required parameters• DIN rail or wall mounting• robust die-cast housing• connectors:4xRF - type Fscrew terminal block for DC entryOrdering number 02558Sections 2Tuning range of channels470-862 MHz (21-69 ch.)RF input TV standard pr.analog digitallevel/impedance 60-90 dBµV/75 Ω 45-80 dBµV/75 Ωfrequency range of RF distributionloop through gainreturn loss47-862 MHz0 ± 1.5 dB>12 dBRF output level/ impedance 90 dBµV/75 Ω 85 dBµV/75 ΩAGC dynamic rangeNoise figureRejectionTechnical specificationsT Y P Efrequency range of RF combiningDC pass throughcombining through loss Terr/SATlevel adjustment range pr.return lossSpurious signals level, typicalMirror channel selectivity, typicalFlatness of channel 6 MHzFlatness of channel 8 MHzDC feeding for externalCurrent consumption*Operating temperature rangeDimensions/Weight (packed)* without external DC loadingpr.at4205-2150 MHz0.3 A1.5/2.5 dB0 ÷ -10 dB by 1 dB step≥10 dB35 dB8 dB45 dB -2 MHz; 45 dB +1.25 MHz from channel border60 dBc60 dBc± 0.7 dB± 1.5 dB12 V 0.1 A max.12 V 0.45 A0 o ÷ +50 o C198x107.5x36 mm/0.9 kgpr.software control

Terrestrial TV productsMultichannel headendMultiband system amplifierAVAILABLE 3 rdquarter 201149• FM, BIII & DAB and UHF inputs• high output level• built-in gain controls• DIN rail or wall mounting• robust diecast housing• connectors:4xRF - type Fscrew terminal block for DC entryOrdering number 10503Gain FM (88-108 MHz) 30 dBVHFIII (174-260 MHz)UHF (470-862 MHz)Number of inputs 3Noise figureMaximal output level IMD3=60 dB (DIN45004B)30 dB30 dBVHF < 5 dB; UHF < 4 dBVHF 118 dBµV; UHF 118 dBµVGain control attenuator 0 ÷ -15 dBReturn lossTechnical specificationsT Y P EDC feeding for externalCurrent consumption*Operating temperature rangeDimensions/Weight (packed)* without external DC loadingswitchma4000/-10 dB> 10 dB12 V 0.1 A max.12 V 0.45 A0 o ÷ +50 o C198x107.5x36 mm/ 0.9 kg• the modulators could be used as stand-alone unitsas well as modular system powered from single power supply• DIN rail or wall mounting• all controls and connectors placed on the front side of the module• loop through output RF combining circuitryPower supply• high efficiency 12 V & 1.25 Aswitch-mode power supplyTechnical specificationsT Y P EGS15E-3P1JOrdering number 00632DC output+12 V 1.25 AMains voltage100 V÷ 240 V~ 50 HzOperating temperature range0 o ÷ +40 o CDimensions/Weight (packed)34x71x50 mm/0.18 kgInstallation example of filtering 6 TV channels from 2 directions &combining with FM and DAB signals.DC power is distributed from single power supply by powering bus.

Terrestrial TV productsMultichannel headendAccessories50DIN rail power supplyTechnical specificationsT Y P EDR-60-12Ordering number 00630DC output+12 V 4.5 AMains voltage100 V÷ 240 V~ 50 HzOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)78x97x56 mm/0.4 kg• DC distribution cable for 4 modules 699.20Ordering number 21875• 19” system mountable rackOrdering number 01957• Fmale - Fmale quick coaxial bridge 699.026Ordering number 21876• Rail for wall mounting, 1 meter, 699.027Ordering number 21877DIN rail mountingWall mounting

Channel processing equipmentAgile TV modulatorsDSB TV modulators52• frequency agile double sideband multistandard TV modulators• LED display and push buttons control of internal microprocessor• non-volatile channel memory• PLL crystal stabilization of carriers frequency• die-cast housing inside plastic case• built-in power supply• adjustable audio input level & RF output level• protection from unauthorized access• loop through RF combining• connectors:video/audio - RCA socketsRF - type FMT41standards: G/H/I/L/K/M/N/Au (UHF range)MT47standards: B/G/D/K/H/I/L/M/N/Au(UHF & VHF ranges)MT57standards: B/G/Au/stereo A2,D/K/H/I/L/M/N/mono (UHF & VHF ranges)Technical specificationsT Y P E MT41 MT47 MT57Ordering number 12860 12862V1 12863V1Video input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 0.1 V/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel adjustment 0 ÷ 7 dB ±6 dB by 2 dB step pr.level/impedance/deviation 775 mV RMS/10 kΩ/50 kHz 2x775 mV RMS/10 kΩ/50 kHz 2x775 mV RMS/10 kΩ/50 kHzRF output level (typical)/impedance 90 dBµV/75 Ω 85 dBµV/75 Ωlevel adjustment0 ÷ -20 dBoutput channels pr.according channels chartsG/H/I/L/K/M/N/AustraliaB/G/D/K/H/I/L/M/N/Australiafrequency range pr.470-862 MHz 45-84 MHz, 170-300 MHz, 470-862 MHzSound subcarrier frequency pr.4.5 MHz, 5.5 MHz, 6.0 MHz, 6.5 MHz B/G/Australia stereo A2*Fine tuning range of video carrier frequency pr.±2.25 MHz max. by 0.25 MHz stepCombining through loss 1.5 dB 2.5 dBFrequency range of RF combining5-862 MHzA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted≥ 55 dBPower consumption 230 V~ 50 Hz 3.5 W 230 V~ 50 Hz 3 W 230 V~ 50 Hz 4 WOperating temperature range -10 o ÷ + 50 o C +0 o ÷ + 50 o CDimensions/Weight (packed) 133x63x39 mm/0.36 kg 133x73x39 mm/0.36 kg* second sound subcarrier frequency 5.742 MHzpr.software control

Channel processing equipmentAgile TV modulatorsDSB TV modulators• frequency agile double sideband TV modulators• non-volatile channel memory• PLL crystal stabilization of carriers frequency• adjustable audio input level• loop through RF combining• whole TV range covered by one model• built-in test pattern generator• connectors:video/audio - type 3xRCA socket,RF - type FMT29standards: B/G/D/K/H/I/L/M/NMT29Cstandards: B/G/D/K/stereo A253Technical specificationsT Y P E MT29 MT29COrdering number 11830 11831Video input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 0.1 V/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel/impedance/deviation775 mV RMS/10 kΩ/50 kHzRF output level (typical) /impedance 100 dBµV/75 Ωlevel adjustment0 ÷ -15 dBoutput channels pr.according channels chartsB/G/D/K/H/I/M/NB/G/D/Kfrequency range pr.47-84 MHz, 170-300 MHz, 470-862 MHzSound subcarrier frequency pr. 4.5 MHz, 5.5 MHz, 6.0 MHz, 6.5 MHz stereo A2Fine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepCombining trough loss2 dBFrequency range of RF combining47-862 MHzA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted≥ 55 dBII, III order intermodulation distortion< -60 dBPower consumption 230 V~ 50 Hz 4.5 W 230 V~ 50 Hz 5 WOperating temperature range-10 o ÷ + 50 o CDimensions/Weight (packed)128x120x54 mm/0.5 kgpr.software control

Channel processing equipmentAgile TV modulatorsVSB TV modulators54• frequency agile vestigial sideband TV modulators• LED display and push buttons control of internal microprocessor• non-volatile channel memory• PLL crystal stabilization of carriers frequency• adjustable RF output level and audio input level• loop through RF combining• low level harmonics and intermodulation products• built-in test pattern generator• connectors:video/audio - type RCA socketRF - type FMT30Astandards: D/K/LMT30Bstandards: B/G/IMT30Cstandards: B/G/stereo A2MT31standards: B/G/D/K/I/LMT31Cstandards: B/G/D/K/stereo A2Technical specificationsT Y P E MT30A MT30B MT30C MT31 MT31COrdering number 00897 00898 00899 14801 14802Video input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 0.1 V/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel/impedance 775 mV/10 kΩ 2x775 mV/10 kΩRF output level/impedance 80 ÷ 95 dBµV/75 Ω 70÷80 dBµV/75 Ωlevel adjustment 0 ÷ -15 dB 0 ÷ -10 dBoutput channels/ L05-69 (L)/ E2-E69 (B/G)/ E2-E69 (B/G)/ E21-E69 (B/G/D/K/I/L) E21-E69 (B/G/D/K)pr.frequency range 176÷862 MHz; 47÷862 MHz; 47÷862 MHz 470÷862 MHz 470÷862 MHz1-69 (D/K)/ 4-69 (I)/48.5÷862 MHz 174÷862 MHzSound subcarrier frequencypr. 6.5 MHz 5.5 MHz, 6.0 MHz stereo A25.5 MHz, 6.0 MHz,6.5 MHzstereo A2Fine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepCombining through loss 3.5 dB 2.5 dBFrequency range of RF combining47-862 MHzA/V ratio pr.12/16 dB 14/18 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted≥ 55 dBII, III order intermodulation distortion< -60 dBPower consumption 230 V~ 50 Hz 6 W 230 V~ 50 Hz 4 W 230 V~ 50 Hz 4.5 WOperating temperature range -10 o ÷ +50 o C 10 o ÷ +40 o CDimensions/Weight (packed) 180x87.5x50.5 mm/0.65 kg 133x73x39 mm/0.36 kgAVAILABLE 3 rdquarter 2011pr.software control

Channel processing equipmentAgile TV modulatorsTwin TV modulatorsModulating analogue video/audio signals intoVSB RF channel with mono or stereo A2 sound.• two independent frequency agile vestigial sidebandTV modulators integrated into one module• LED display and push buttons control of internal microprocessor• non-volatile channel memory• PLL crystal stabilization of carriers frequency• adjustable RF output level and audio input level for every section• loop through RF combining• low level harmonics and intermodulation products• built-in test pattern generator• robust diecast housing• connectors:video/audio input - RCA socketRF - type Fscrew terminal block for DC entrymt420VSB modulator,standard B/G/D/K/I/L/Aumt420CVSB modulator,standard B/G/D/K/Au stereo A255Technical specificationsT Y P E mt420 mt420COrdering number 02872 02873Sections 2TV standard pr.B/G/D/K/I/L/Au B/G/D/K/Au stereo A2Frequency range110-862 MHzVideo input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 0.1 V/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel/impedance775 mV/10 kΩlevel adjustmentpr.+ 6 ÷ -6 dB by 2 dB stepRF output level/impedance 90 dBµV/75 Ωlevel adjustment range0 ÷ -10 dB by 1 dB stepfrequency range of RF combining47-2150 MHzDC pass through0.3 Acombining through loss Terr/SAT1.5/2.5 dBreturn loss≥ 10 dBFine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepIF bandwidthpr.7/8 MHzS/N ratio, weighted> 55 dBA/V ratiopr.12/16 dBIMD2/IMD3 spurious level< -60 dBCurrent consumption 12 V 0.45 A 12 V 0.47 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)198x107.5x36 mm/0.9 kgsoftware conpr.

Channel processing equipmentAgile TV modulatorsTwin TV modulators• the modulators could be used as stand-alone unitsas well as modular system powered from single power supply• DIN rail or wall mounting• all controls and connectors placed on the front side of the module• loop through output RF combining circuitry56Power supply• high efficiency 12 V & 1.25 Aswitch-mode power supplyTechnical specificationsT Y P EGS15E-3P1JOrdering number 00632DC output+12 V 1.25 AMains voltage100 V÷ 240 V~ 50 HzOperating temperature range0 o ÷ +40 o CDimensions/Weight (packed)34x71x50 mm/0.18 kgInstallation example of combining 8 modulated channels.DC power is distributed from single power supply by powering bus.AccessoriesDIN rail power supplyTechnical specificationsT Y P EDR-60-12Ordering number 00630DC output+12 V 4.5 AMains voltage100 V÷ 240 V~ 50 HzOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)78x97x56 mm/0.4 kg• DC distribution cable for 4 modules 699.20Ordering number 21875• 19” system mountable rackOrdering number 01957• Fmale - Fmale quick coaxial bridge 699.026Ordering number 21876• Rail for wall mounting, 1 meter, 699.027Ordering number 21877

Channel processing equipmentMini modular headend MMH3000Main system featuresMini modular headend MMH3000 is compact solution for thedistribution of DVB signals in SMATV and CATV networks in analogueas well as in digital format.The modern master-slave technology allows to build costeffectiveanalog TV installations and simplify a circuitry of SAT IFand terrestrial input signal distribution.Very flexible DVB-C and DVB-T transmitting system with minimalamount of the modules could be done due to the original transportstream distribution systemCommunication over LAN, WAN or the Internet using bi-directionalTSoIP module significantly extends possibilities of the headend.Programming of MMH3000 could be made locally by handheldprogrammer and software or remotely through internet or othercommunication line using advanced control and monitoringsoftware. Also is possible to “clone” headend’s settings from thesaved configuration file.Almost all parameters of the modules are controlled byprogramming via CMH data bus.It is necessary minimal amount of additional external equipmentsfor installation of the headend.57Mini modular headend MMH3000 consists of:• DVB-S, DVB-T, DVB-ASI & MPEG2 TS processingmodules into VSB or DSB analogue channel• VSB TV modulators• TV channel converting module• DVB-S/S2 & DVB-T processing modules toDVB-T/C channels• FM radio amplifier• TSoIP bi-directional interface module• H.264 (MPEG4) to MPEG2 transcoder• MPEG2 encoder• control software and accessoriesUC380UC360

Channel processing equipmentMini modular headend MMH3000Base unitsUC360• base unit for up 6 modules installation• wall mounting• built-in power supply, RF output amplifier withcombiner, power and data distribution bus• data bus extension ports• all external connections from top and bottom sides58UC380• base unit for up 8 modules installation• wall or 19” rack 5U height mounting• built-in µ-controller for measure and monitoring ofvoltage, current and temperature• built-in power supply, RF output amplifierwith combiner, power and data distribution bus• data bus extension ports• all external connections from top and bottom sides• integrated fanTechnical specificationsT Y P E UC360 UC380Ordering number 14810 13810Power supplyInput voltage180- 250 V~ 50 HzPower consumption, max. 100 W 125 WOutput voltage, current 5.5 V, 11 A max. 5.7 V, 14 A max.Output voltage for LNB poweringvia DVB-S module, switchable18 V 0.6 A max.RF combinerFrequency range47-862 MHzInsertion loss-18 dBIsolation> 20 dBOutput amplifierFrequency range47-862 MHzGain 13 dB 20 dBGain adjustment10 dBOperating output level 95 dBµV (6 modules) 102 dBµV (8 modules)RF test-20 dBGeneralOperating temperature range0 0 ÷ +50 0 CPC connectionRS485 and USB (optional) portsDimensions/Weight (packed) 374.5x235x181.5 mm/6.8 kg 450.5x235x126 mm/6.5 kg

Channel processing equipmentMini modular headend MMH3000Plug-in modules - overviewType Description Catalogue pagerd315 DVB-S/S2 receiver with VSB modulator (mono/A2 stereo/NICAM) 60rdc315 DVB-S/S2 receiver with CA interface and VSB modulator (mono/A2 stereo/NICAM) 60rd316 DVB-S/S2 receiver with DSB modulator (mono/A2 stereo) 60rdc316 DVB-S/S2 receiver with CA interface and DSB modulator (mono/A2 stereo) 60rt315 DVB-T receiver with VSB modulator (mono/A2 stereo/NICAM) 61rtc315 DVB-T receiver with CA interface and VSB modulator (mono/A2 stereo/NICAM) 61rt316 DVB-T receiver with DSB modulator (mono/A2 stereo) 61rtc316 DVB-T receiver with CA interface and DSB modulator (mono/A2 stereo) 61ra315 DVB-ASI receiver with VSB modulator (mono/A2 stereo/NICAM) 62rac315 DVB-ASI receiver with CA interface and VSB modulator (mono/A2 stereo/NICAM) 62ra316 DVB-ASI receiver with DSB modulator (mono/A2 stereo) 62rac316 DVB-ASI receiver with CA interface and DSB modulator (mono/A2 stereo) 62dm315 MPEG2 TS receiver with VSB modulator (mono/A2 stereo/NICAM) 63dmc315 MPEG2 TS receiver with CA interface and VSB modulator (mono/A2 stereo/NICAM) 63dm316 MPEG2 TS receiver with DSB modulator (mono/A2 stereo) 63dmc316 MPEG2 TS receiver with CA interface and DSB modulator (mono/A2 stereo) 63mt310 VSB modulator (mono/A2 stereo/NICAM) 64af310B FM radio amplifier 64ct311 Analog & digital TV channel converter 66tdx311 DVB-S/S2 transmodulator to DVB-T 67tdx311c DVB-S/S2 transmodulator to DVB-T with CA interface 67tdq311 DVB-S/S2 transmodulator to DVB-C 67tdq311c DVB-S/S2 transmodulator to DVB-C with CA interface 67ttx311 DVB-T transmodulator to DVB-T 68ttx311c DVB-T transmodulator to DVB-T with CA interface 68ttq311 DVB-T transmodulator to DVB-C 68ttq311c DVB-T transmodulator to DVB-C with CA interface 68trx360 6 TS inputs remultiplexer - DVB-T modulator 69trq360 6 TS inputs remultiplexer - DVB-C modulator 69ia310 TSoIP-TS-ASI bi-directional converter 70ia311 TS-ASI switch/converter 70dc310 DVB-S/S2 MPEG2/H.264 to MPEG2 transcoder 71dcc310 DVB-S/S2 MPEG2/H.264 to MPEG2 transcoder with CA interface 71tc310 DVB-T MPEG2/H.264 to MPEG2 transcoder 71tcc310 DVB-T MPEG2/H.264 to MPEG2 transcoder with CA interface 71ac310 DVB-ASI MPEG2/H.264 to MPEG2 transcoder 71acc310 DVB-ASI MPEG2/H.264 to MPEG2 transcoder with CA interface 71mc310 MPEG2 TS/H.264 to MPEG2 transcoder 71mcc310 MPEG2 TS/H.264 to MPEG2 transcoder with CA interface 71md330 MPEG2 encoder 7259

Channel processing equipmentMini modular headend MMH30008PSK/QPSK-PAL/SECAM receivers-modulatorsConverting DVB-S/S2 MPEG2/H.264 coded SAT IF signals into analoguePAL or SECAM program with mono or stereo A2/NICAM sound.60• for receiving of DVB-S/S2 SAT IF signals andconverting it to analogue TV programs• works as “master” module for distributionMPEG2 transport stream to “slave” modules (dm31xx)• input signal level measurement• built-in CA interface*• teletext reinsertion & DVB subtitles decoding• software/hardware watchdog timer• low level harmonics and intermodulation products• input RF loop through• connector:MPEG2 TS outputRF input & output - type Frd315C*8PSK/QPSK-PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2rd315CN*8PSK/QPSK-PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2, NICAMrd316*8PSK/QPSK-PAL/SECAM receiver-DSB modulator,standard B/G/D/K/I/L/M/Nrd316C*8PSK/QPSK-PAL/SECAM receiver-DSB modulator,standard B/G/D/K/stereo A2Technical specificationsT Y P E rd315C rd315CN rd316 rd316CAVAILABLE 3 rdquarter 2011AVAILABLE 3 rdquarter 2011Ordering number 13855 13856 13857 13858ReceiverRF input frequency range pr.950 -2150 MHzlevel/impedance30-88 dBµV/75 ΩLNB powering/controlpr.0/18 V & 400 mA max.Input data symbol rate1÷ 45 MS/sMPEG2 TS output2 ÷ 80 Mbit/sModulatorTV standard pr. B/G/D/K/stereo A2 B/G/D/K/stereo A2, NICAM B/G/D/K/I/L/M/N B/G/D/K/stereo A2RF output level/impedance 100 dBµV /75 Ωfrequency range pr.110-862 MHz 119-300 MHz & 470-862 MHzOutput level adjustment range0 ÷ -15 dBCarriers accuracy± 20 kHzFine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepVideo frequency response± 1 dBA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted ≥ 57 dB ≥ 55 dBII, III order intermodulation distortion< -60 dBCurrent consumption 5.5 V 1.25 A (1.55 A*) 5.5 V 0.8 A (1.1 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)45x115x232 mm/0.46 kgpr.software control* option with CA interface: rdc315C (ordering number 13855C)rdc315CN (ordering number 13856C)rdc316 (ordering number 13857C)rdc316C (ordering number 13858C)

Channel processing equipmentMini modular headend MMH3000OFDM-PAL/SECAM receivers-modulatorsConverting DVB-T MPEG2/H.264 coded terrestrial TV signals intoanalogue PAL or SECAM program with mono, stereo A2/NICAM sound.• for receiving of DVB-T MPEG2 and H.264 codedsignals and converting it to analogue TV programs• works as “master” module for distributionMPEG2 transport stream to “slave” modules(dm31xx)• input signal level measurement• built-in CA interface*• teletext reinsertion & DVB subtitles decoding• software/hardware watchdog timer• low level harmonics and intermodulation products• input RF loop through• connector:MPEG2 TS outputRF input & output - type Frt315C*OFDM-PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2rt315CN*OFDM-PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2, NICAMrt316*OFDM-PAL/SECAM receiver-DSB modulator,standard B/G/D/K/I/L/M/Nrt316C*OFDM-PAL/SECAM receiver-DSB modulator,standard B/G/D/K/stereo A2Technical specificationsT Y P E rt315C rt315CN rt316 rt316COrdering number 13863 13864 13846 13865ReceiverRF input frequency range pr.174-230 MHz, 470 -862 MHzlevel/impedance30-88 dBµV/75 ΩPreamplifier poweringpr.0/12 V 100 mA max.MPEG2 TS output2 ÷ 80 Mbit/sModulatorTV standard pr. B/G/D/K/stereo A2 B/G/D/K/stereo A2, NICAM B/G/D/K/I/L/M/N B/G/D/K/stereo A2RF output level/impedance 100 dBµV /75 Ωfrequency range pr.110-862 MHz 119-300 MHz & 470-862 MHzOutput level adjustment range0 ÷ -15 dBCarriers accuracy± 20 kHzFine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepVideo frequency response± 1 dBA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted ≥ 57 dB ≥ 55 dBII, III order intermodulation distortion< -60 dBCurrent consumption 5.5 V 1.15 A (1.45 A*) 5.5 V 0.6 A (0.9 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)45x115x232 mm/0.46 kgAVAILABLE 3 rdquarter 2011AVAILABLE 3 rdquarter 201161pr.software control* option with CA interface: rtc315C (ordering number 13863C)rtc315CN (ordering number 13864C)rtc316 (ordering number 13846C)rtc316C (ordering number 13865C)

Channel processing equipmentMini modular headend MMH3000DVB-ASI - PAL/SECAM receivers-modulatorsDecoding DVB-ASI MPEG2/H.264 programs and converting intoanalogue PAL or SECAM program with mono, stereo A2/NICAM sound.62• for receiving DVB-ASI MPEG2 and H.264 coded signalsand converting it to analogue TV programs• works as “master” module for distributionMPEG2 transport stream to “slave” modules(dm31xx)• input signal level measurement• built-in CA interface*• teletext reinsertion & DVB subtitles decoding• software/hardware watchdog timer• low level harmonics and intermodulation products• input loop through• connector:MPEG2 TS outputASI input & output - type Fra315C*DVB-ASI - PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2ra315CN*DVB-ASI - PAL/SECAM receiver-VSB modulator,standard B/G/D/K/stereo A2, NICAMra316*DVB-ASI - PAL/SECAM receiver-DSB modulator,standard B/G/D/K/I/L/M/Nra316C*DVB-ASI - PAL/SECAM receiver-DSB modulator,standard B/G/D/K/stereo A2Technical specificationsT Y P E ra315C ra315CN ra316 ra316CAVAILABLE 3 rdquarter 2011AVAILABLE 3 rdquarter 2011Ordering number 13859 13860 13861 13862ReceiverASI input packet length 188 /204 bytesbit rateup to 72 Mbpsinput voltage200...880 mVppimpedance75 Ωreturn loss>15 dBMPEG2 TS output2 ÷ 80 Mbit/sModulatorTV standard pr. B/G/D/K/stereo A2 B/G/D/K/ stereo A2, NICAM B/G/D/K/I/L/M/N B/G/D/K/stereo A2RF output level/impedance 100 dBµV /75 Ωfrequency range pr.110-862 MHz 119-300 MHz & 470-862 MHzOutput level adjustment range0 ÷ -15 dBCarriers accuracy± 20 kHzFine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepVideo frequency response± 1 dBA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted ≥ 57 dB ≥ 55 dBII, III order intermodulation distortion< -60 dBCurrent consumption 5.5 V 1.25 A (1.55 A*) 5.5 V 0.6 A (0.8 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.46 kgpr.software control* option with CA interface: rac315C (ordering number 13859C)rac315CN (ordering number 13860C)rac316 (ordering number 13861C)rac316C (ordering number 13862C)

Channel processing equipmentMini modular headend MMH3000MPEG2 TS decoders-modulatorsConverting MPEG2/H.264 coded transport stream signal into analoguePAL or SECAM program with mono, stereo A2, NICAM sound.• “slave” module for decoding of DVB MPEG2 and H.264signals and converting it to analogue TV programs• built-in CA interface*• teletext reinsertion & DVB subtitles decoding• software/hardware watchdog timer• low level harmonics and intermodulation products• connector:MPEG2 TS inputdm315C*MPEG2/H.264-PAL/SECAM decoder-VSB modulator,standard B/G/D/K/stereo A2dm315CN*MPEG2/H.264-PAL/SECAM decoder-VSB modulator,standard B/G/D/K/stereo A2, NICAMdm316*MPEG2/H.264-PAL/SECAM decoder-DSB modulator,standard B/G/D/K/I/L/M/Ndm316C*MPEG2/H.264-PAL/SECAM decoder-DSB modulator,standard B/G/D/K/stereo A2Technical specificationsT Y P E dm315C dm315CN dm316 dm316CAVAILABLE 3 rdquarter 2011AVAILABLE 3 rdquarter 2011Ordering number 13866 13867 13847 13868MPEG2 TS input2 ÷ 80 Mbit/sModulatorTV standard pr. B/G/D/K/stereo A2 B/G/D/K/ stereo A2, NICAM B/G/D/K/I/L/M/N B/G/D/K/stereo A2RF output level/impedance 100 dBµV /75 Ωfrequency range pr.110-862 MHz 119-300 MHz & 470-862 MHzOutput level adjustment range0 ÷ -15 dBCarriers accuracy± 20 kHzFine tuning range of video carrier frequency pr.± 2.25 MHz max. by 0.25 MHz stepVideo frequency response± 1 dBA/V ratiopr.12/16 dBAmplitude modulation depth, typical 81 %Signal/noise ratio, weighted ≥ 57 dB ≥ 55 dBII, III order intermodulation distortion< -60 dBCurrent consumption 5.5 V 1.05 A (1.4 A*) 5.5 V 0.5 A (0.8 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)45x115x220.5 mm/0.42 kg63pr.software control* option with CA interface: dmc315C (ordering number 13866C)dmc315CN (ordering number 13867C)dmc316 (ordering number 13847C)dmc316C (ordering number 13868C)

Channel processing equipmentMini modular headend MMH3000TV modulatorsModulating analogue video/audio signals into VSB RF channelwith mono, stereo A2 sound or stereo NICAM 728 sound.• output level stabilization• carriers crystal stabilization• low level harmonics and intermodulation products• connectors:video/audio, input - 15 Sub-D socketmt310VSB modulator,standard B/G/D/K/I/Lmt310CVSB modulator,standard B/G/D/K/stereo A2mt310NVSB modulator,standard B/G/D/K/stereo NICAM 72864Technical specificationsT Y P E mt310 mt310C mt310NOrdering number 13819 13820 13869TV standard pr.B/G/D/K/I/L B/G/D/K/stereo A2 B/G/D/K/stereo NICAMFrequency range110-862 MHzVideo input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 3 dB/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel/impedance775 mV/10 kΩRF output level/impedance 100 dBµV/75 ΩSound subcarrier frequency 5.5 MHz, 6.0 MHz, 6.5 MHz stereo A2* stereo NICAM 728**Return loss≥ 14 dBOutput level adjustment range0 ÷ -10 dBS/N ratio, weighted> 57 dBA/V ratiopr.12/16 dBAudio level adjustmentpr.+ 6 ÷ -6 dB by 2 dB stepIMD2/IMD3 spurious level< -60 dBCurrent consumption 5.5 V 0.63 A 5.5 V 0.67 A 5.5 V 0.85 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)45x115x220.5 mm/0.38 kg* second sound subcarrier frequency 5.742 MHz B/G/stereo A2; 6.257 MHz D/K/stereo A2** second sound subcarrier frequency 5.85 MHz B/G, D/K/stereo NICAM 728software conpr.FM radio amplifierWhole FM radio band amplifier for insertion ofFM radio programs into distribution network.• output level control• input RF loop through• connector:RF input and test - type FTechnical specificationsT Y P Eaf310BOrdering number 13840Frequency range87.5-108 MHzNoise figure, typical5 dBGainpr.40 dBGain adjustment30 dB by 1 dB stepTest point-10 dBCurrent consumption5.5 V 0.25 ADimensions/Weight (packed)45x115x220.5 mm/0.42 kgsoftware conpr.

Channel processing equipmentMini modular headend MMH3000Application diagramsDVB-T to analog TV channels & FM radioprograms processing:# 1 & 2 - 2 programs, UHF1 direction# 3 & 4 - 2 programs, UHF2 direction# 5 & 6 - 2 programs, VHF direction# 7 - signal of CCTV camera inserting# 8 - FM radio re-transmitting65DVB-S to analog TV channels processing:# 1 & 2 - 2 programs, 1 sub-band# 3 - 1 program, 2 sub-band# 4 - 1 program, 3 sub-band# 5, 6, 7 & 8 - 4 programs, 4 sub-bandDVB-S to analog TV channels processing fromsingle sub-band:# 1, 2, 3 & 4 - 4 programs from 4 differenttransponders# 5, 6, 7 & 8 - 4 programs from singletransponder

Channel processing equipmentMini modular headend MMH3000Analog and digital TV channel converterInput channel to output channel converter. Works via low frequencyIF and allows to change program’s retransmitting frequency.66• double conversation technology• high selectivity determinated by double SAW filters• AGC system at input• input signal level and P/S carriers ratio measurement• low level harmonics and intermodulation products• 12V DC for preamplifier powering• connector:RF input & output - type FTechnical specificationsT Y P Ect311Ordering number 13841RF input TV standard pr.analog DVB-C DVB-Tfrequency range pr.45-862 MHz 170-230 MHz, 470-862 MHzTV channel accordingchannels chartspr.B/G/D/K/Australia/NZlevel/impedance 60-90 dBµV/75 Ω 50-80 dBµV/75 Ωshut down input level pr.< 50 dBµV ≤ 40 dBµVDC for external powering12 V & 0.1 A max.loop through frequency range47-862 MHzloop through gain1.5 ± 1 dBRF output frequency range pr.110-862 MHz 170-230 MHz, 470-862 MHzlevel/impedance 100 dBµV/75 Ω 90 dBµV/75 ΩNoise figure< 6 dBOutput level adjustment rangepr.0 ÷ -15.5 dB by 0.5 dB stepIF bandwidthpr.7/8 MHzIMD2/IMD3 spurious level< -60 dBCurrent consumption5.5 V 0.91 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)45x115x220.5 mm/0.42 kgpr.software control

Channel processing equipmentMini modular headend MMH30008PSK/QPSK-COFDM/QAM transmodulatorsConverting of DVB-S/S2 8PSK/QPSK modulated SAT IF signalinto COFDM/QAM modulated DVB-T/DVB-C RF channel.• TS processing:EPG multiplexingPCR restampingservice filteringPSI/SI regenerationNIT generationPMT version monitoring• connectors:MPEG2 TS outputRF input & output - type Ftdx311*8PSK/QPSK - COFDM transmodulatortdq311*8PSK/QPSK - QAM transmodulator67Technical specificationsT Y P E tdx311 tdq311Ordering number 13842 13848RF input frequency range pr.950 - 2150 MHzlevel/impedance45-85 dBµV/75 ΩmodulationQPSK, 8PSK (DVB-S/S2)symbol ratepr.1 ÷ 45 MS/sLNB powering/control pr.0/18 V 500 mAloop through frequency range/gain950-2150 MHz/2 dBRF output frequency range pr.110 - 860 MHzlevel/impedance90 dBµV/75 Ωoutput C/N≥ 50 dBMER ≥ 35 dB ≥ 40 dBmodulation pr.QPSK, QAM16, QAM64 QAM16, QAM32, QAM64, QAM128, QAM256channel bandwidth pr.7/8 MHz 4...8.3 MHzguard interval pr.1/4, 1/8, 1/16, 1/32 -code rate pr.1/2, 2/3, 3/4, 5/6, 7/8 -transmission mode 2K -symbol rate pr.- 3.5 ÷ 7.2 MS/soutput level adjustment range pr.0 ÷ -15.5 dB by 0.5 dB stepCurrent consumption5.5 V 1.5 A (1.8 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.7 kgpr.software control* option with CA interface: tdx311c (ordering number 13842C)tdq311c (ordering number 13848C)

Channel processing equipmentMini modular headend MMH3000COFDM-COFDM/QAM transmodulatorsConverting of DVB-T COFDM modulated input signalinto COFDM/QAM modulated DVB-T/DVB-C RF channel.68• tunable DVB-T in VHF & UHF range• allowing to regenerate the qualityof the multiplex (for ttx311 only)• TS processing:EPG multiplexingPCR restampingservice filteringPSI/SI regenerationNIT generationPMT version monitoring• connectors:MPEG2 TS outputRF input & output - type Fttx311*COFDM - COFDM transmodulatorttq311*COFDM - QAM transmodulatorTechnical specificationsT Y P E ttx311 ttq311Ordering number 13843 13850RF input frequency range pr.174 - 230 MHz & 470-862 MHzlevel/impedance35-90 dBµV/75 ΩmodulationQPSK, QAM16, QAM64preamplifier powering0/12 V 100 mA max.loop through frequency range/gain47-862 MHz/2 dBRF output frequency range pr.110- 860 MHzlevel/impedance90 dBµV/75 Ωoutput C/N≥ 50 dBMER ≥ 35 dB ≥ 40 dBmodulation pr.QPSK, QAM16, QAM64 QAM16, QAM32, QAM64, QAM128, QAM256channel bandwidth pr.7/8 MHz 4...8.3 MHzguard interval pr.1/4, 1/8, 1/16, 1/32 -code rate pr.1/2, 2/3, 3/4, 5/6, 7/8 -transmission mode 2K -symbol rate pr.- 3.5 ÷ 7.2 MS/soutput level adjustment range pr.0 ÷ -15.5 dB by 0.5 dB stepCurrent consumption5.5 V 1.3 A (1.6 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.7 kgpr.software control* option with CA interface: ttx311c (ordering number 13843C)ttq311c (ordering number 13850C)

Channel processing equipmentMini modular headend MMH3000DVB-T/DVB-C remultiplexers-modulatorsMultiplexing up to 6 transport streams and convertinginto COFDM/QAM modulated DVB-T/DVB-C RF channel.• TS processing:EPG multiplexingPCR restampingservice filteringPSI/SI regenerationNIT generation• connectors:6xMPEG TS inputsMPEG2 TS output (multiplexed)trx360DVB-T remultiplexer-modulatortrq360DVB-C remultiplexer-modulator69Technical specificationsT Y P E trx360 trq360Ordering number 13844 13849TS input typeserialTS input channels 6TS output typeserialTS input bit rate< 100 Mbit/sTS output bit rate < 31 Mbit/s < 53 Mbit/sRF output frequency range pr.110 - 860 MHzlevel/impedance90 dBµV/75 Ωoutput C/N≥ 50 dBMER ≥ 35 dB ≥ 40 dBmodulation pr.QPSK, QAM16, QAM64 QAM16, QAM32, QAM64, QAM128, QAM256channel bandwidth pr.7/8 MHz 4...8.3 MHzguard interval pr.1/4, 1/8, 1/16, 1/32 -code rate pr.1/2, 2/3, 3/4, 5/6, 7/8 -transmission mode 2K -symbol rate pr.- 3.5 ÷ 7.2 MS/soutput level adjustment range pr.0 ÷ -15.5 dB by 0.5 dB stepCurrent consumption5.5 V 1.2 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.66 kgpr.software control

Channel processing equipmentMini modular headend MMH3000TSoIP-TS-ASI and TS-ASI convertersAVAILABLE 3 rdquarter 2011Bi-directional converting TSoIP to TS/ASI and ASI to TS.70• for communication over LAN, WAN or theInternet (for ia310 only)• controllable priority/redundancy TS switch• inputs: TS1, TS2, ASI (TSoIP for ia310 only)• outputs: TS, ASI or (TSoIP for ia310 only)• connectors:2xMPEG2 TS inputMPEG2 TS outputASI input & output - type FEthernet port - RJ45 (for ia310 only)ia310TSoIP-TS-ASI bi-directional converteria311TS-ASI switch/converterTechnical specificationsT Y P E ia310 ia311Ordering number 13870 13871TS input typeserialTS input bit rate80 Mbps max.TS output typeserialTS output bit rate80 Mbps max.ASI input/output type75 ΩASI bit rate214 Mbps maxTSoIP data rate 100/1000 Mbps -input/output Ethernet encapsulation IEE802.2 SNAP, Eth. II -IP support IPv4 -IP-address assignment pr.DHCP or static IP -multicast support IGMP v2 -TP per IP pr.1..7 -TS encapsulation pr.UDP or RTP -FEC SMPTE 2022 -jitter tolerance range 1..500 mS -Directions of conversionpr.TSoIP → TS, ASI TS1 input → TS, ASI outputTS, ASI → TSoIPTS2 input → TS, ASI outputASI input → TS, ASI outputCurrent consumption 5.5 V 1.5 A 5.5 V 1.0 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.66 kgpr.software control

Channel processing equipmentMini modular headend MMH3000MPEG2/H.264 to MPEG2 transcodersTranscoding MPEG2/H.264 coded signals intoMPEG2 transport stream (TS) output and MPEG2 DVB-ASI.AVAILABLE 3 rdquarter 2011• flexible decoder stream input:- DVB-S/S2- DVB-T- DVB-ASI- MPEG2/H.264 TS• input signal level measurement• input loop through• built-in CA interface*• programmable MPEG2 encoder compression bitrates• simultaneous transcoded TS output on DVB-ASIand MPEG2 TS connector• connectors:MPEG2/H.264 RF/ASI ports - type FMPEG2 TS input/output (MPTS)transcoded MPEG2 TS output (SPTS)MPEG2 ASI/SDI ports - type Fdc310*DVB-S/S2 input MPEG2/H.264 to MPEG2 transcodertc310*DVB-T input MPEG2/H.264 to MPEG2 transcoderac310*DVB-ASI input MPEG2/H.264 to MPEG2 transcoderwith SD SDI inputmc310*MPEG2/H.264 TS input to MPEG2 transcoder71Technical specificationsT Y P E dc310 tc310 mc310 ac310Ordering number 13872 13873 13874 13875ReceiverRF input level/impedance 45-85 dBµV/75 Ω 30-88 dBµV/75 Ω - 200...880 mVpp/75 Ωfrequency range pr. 950 -2150 MHz 174-230 MHz, 470 -862 MHz - -External powering/control pr.0/18 V & 250 mA max. 12 V & 100 mA max. - -Modulation typeQPSK (DVB-S);QPSK, 8PSK (DVB-S2)QPSK, QAM16, QAM64 - -Input data rate pr.1÷ 45 MS/s 2 ÷ 80 Mbit/s up to 72 MbpsMPEG2 TS output - SD/HD MPTS 2 ÷ 80 Mbit/s - 2 ÷ 80 Mbit/sTranscoded MPEG2 TS output - SD SPTS1÷ 15 Mbit/sType F port 1 DVB-ASI OUT, SD-SDI OUT DVB-ASI OUT, SD-SDI IN/OUTType F port 2standard definition SPTS DVB-ASI OUTEncoderVideo encoding ISO/IEC13818-2 MPEG-2 MP@MLresolutionpr.720 x 576 (at 25 fps), 720 x 480 (at 30 fps)frame rate pr.25 max. PAL, 30 max. NTSCAudio encoding ISO /IEC11172-3 (MPEG1 audio) layer 2 compliantsampling rate pr.48 kHzcompressed bit rate pr.56 to 384 Kbps per channelAudio/Video multiplexingISO/IEC13818-1 MPEG2 TSCompressed system bit ratepr.1 to 15 Mbit/sCompressed system bit rate mode pr.constant, variableTranscoded outputDVB-ASI, MPEG2 TSCurrent consumption5.5 V 1.15 A (1.45 A*)Operating temperature range0 o ÷ +50 o CDimensions/Weight (packed) 47.5x117x220.5 mm/0.68 kg 47.5x117x220.5 mm/0.62 kg 47.5x117x220.5 mm/0.68 kgpr.software control* option with CA interface: dcc310 (ordering number 13872C)tcc310 (ordering number 13873C)acc310 (ordering number 13874C)mcc310 (ordering number 13875C)

Channel processing equipmentMini modular headend MMH30003-channel MPEG2 encoderConverting analogue video/audio signals into MPEG2 coded transport stream.72• three composite video and three stereo audio inputs• three individual MPEG2 TS outputs• MPEG2 TS PID control• video brightness, contrast, saturation, hue control• programmable audio and video compression bit rates• programmable audio sampling rate• audio level control• parameters control via CMH data bus extension port• firmware upgradeable• connectors:3-channel video/audio input – 15-pin Sub-D socket on the bottom sidethree MPEG2 TS outputs: TS1, TS2 and TS3 on the front panelTechnical specificationsT Y P Emd330Ordering number 13845Sections 3Video encoding ISO/IEC13818-2 MPEG-2 MP@MLresolutionpr.720 x 576 (at 25 fps), 720 x 480 (at 30 fps)frame ratepr.25 max. PAL, 30 max. NTSCAudio encoding ISO /IEC11172-3 (MPEG1 audio) layer 1/2 compliantsampling ratepr.32 kHz, 44.1 kHz, 48 kHzcompressed bit rate pr.32 to 384 Kbps per channelaudio modepr.Stereo, Joint Stereo, Dual Channel, MonoAudio/Video multiplexingISO/IEC13818-1 MPEG2 TSCompressed system bit ratepr.1 to 15 Mbps per channelCompressed system bit rate mode pr.constant, variableVideo standardpr.PAL (I, B, G, H, D, N), SECAM, NTSCCurrent consumption5.5 V 1 AOperating temperature range0 o ÷ +50 o CDimensions/Weight (packed)47.5x117x220.5 mm/0.9 kgpr.software control

Channel processing equipmentMini modular headend MMH3000Application diagramsTerrestrial TV & CCTV processing to DVB-T channels:# 1, 2 & 3 - 3 DVB-T channels from single directionand 2 transponders# 4 & 5 - 2 DVB-T channels converting from single direction# 6, 7 & 8 - 6 CCTV cameras inserting in DVB-T format 73DVB-S programs processing from single sub-bandand single transponder to:# 1, 2, 3, 4, 5 & 6 - 6 analog RF programs# 7 - 1 DVB-T multiplex# 8 - 1 DVB-C multiplexDVB-S programs processing from 2 sub-bands anddifferent transponders to:# 1, 2, 3, 5, 6, 7 - 6 analog RF programs# 4 - 1 DVB-T multiplex# 8 - 1 TSoIP multiplex

Channel processing equipmentMini modular headend MMH3000Application diagrams74TSoIP multiplex processing to analog TV programsrack A:# 2 - converting from TSoIP to TS and ASI# 3, 4, 5, 6, 7 - 6 analog not scrambled TV programs transmitting# 7 - DVB-C multiplex of 5 programs# 1 - automatic switch on to external ASI source in case ofinterruption receiving from NETrack B:# 1 - receiving, descrambling TS on ASI andtransmitting 1 analog descrambled TV program# 2, 3, 4, 5, 6, 7, 8 - transmitting of 7 descrambled analog TVprogramsDVB-S, DVB-ASI and TSoIP MPEG2/H.264 programs transcoded to:- 1 DVB-T multiplex of 6 SD MPEG2 programs

Channel processing equipmentMini modular headend MMH3000Control and monitoring softwareTerra Link - free software program allows to control up to 16 modules -2 subracks of CMH3000, MMH3000 in any configuration (could be downloadedfrom www.terraelectronics.com, section downloads).• PC is connected to the headend through appropriate USB interface• maximal count of the addressable modules - 16• automatic statusing of the headend configuration• user-friendly graphical presentation of all programmable parameters• obtaining information of the modules status• save/load configuration files of the headends settings to/from the PCCMH Master - the program is intended for management and diagnostics ofthe headends CMH3000, MMH3000.• PC to the headend is connected through appropriate USB interface• maximal number of served modules - 256• maximal number of served subracks or groups - 16• automatic statusing of the headend configuration• user-friendly graphical presentation of all programmable parameters• obtaining information of the modules status• fixing of diagnostic information in log-file• changing headend’s settings in time by composed schedule of events• possibility to send alarm SMS and remote control of the headendthrough GSM network by PC with GSM terminal75Handheld control unit PC100• for programming up to 16 modules in 2 subracks ofCMH3000, MMH3000 headends• connection to the data bus through connector,placed on the base unit• 2 line, 16 characters LCD display with back lightOrdering number 11825USB-CMH data bus adapter UD104• MMH3000, CMH3000 headends PC control• supplied with program TERRA LinkOrdering number 13825USB-CMH data bus adapter UD101• MMH3000 headend control via USB port of the PC• mounted inside of the base units UC360 and UC380• supplied with program TERRA LinkOrdering number 13826

Channel processing equipmentMini modular headend MMH3000Remote control and monitoring server76• remote control for CMH3000, MMH3000 headends• management from anywhere using a web browser• software upgrade via HTTP• controls up to 256 modules• custom access levels for multiple users• I/O control for external devices• all parameters are controlled by programming via CMH data bus• integrated LCD control panel and keyboard• connectors:PC control port - USBLAN ports - RJ45 Ethernet 10/100CMH data bus extension ports - 4P4Cserial interface - RS232Technical specificationsT Y P EPCS200Ordering number 13828Configurable inputs-outputstwo optoisolated inputstwo relay outputsSpecial-purpose inputs-outputsUPS status porttemperature sensor input (1-Wire)Power consumption187-250V~ 50 Hz 3.5 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3 kgFan cooling block• fan cooling block for UC380 base unit;powered and controlled from the base unit• placed on the top of UC380, see picture at bottomT Y P EFP380Ordering number 13834Supply voltage / Current consumption24 ± 3 V / 0.14 ADimensions/Weight (packed)452x121x160 mm/1.35 kgAccessoriesT Y P E Ordering number DescriptionCable 400.38 11868 V/A cable (15 Sub-D/3xRCA, length 1.5 m ) for external equipment connection to modulators mt310, mt310CCable 440.60 21872 TS distribution cable, 8 connectors, length 40.8 cmCable 440.41 21873 coaxial link for input loop through line, F male - F male, 2 quick connectors, length 14.7 cmSupports 440.077 13833 fixing supports for vertical mounting of UC380 base unit on the horizontale plane, see picture aboveSwitch PI010 01789 forms commands for selection band/polarity by SAT IF; allows to use universal LNB, page 37

Channel processing equipmentCompact modular headend CMH3000Main system features• all parameters of the modules arecontrolled by programming via CMH data bus• local or remote control/monitoringsystem using PC• extended self-diagnostic• open architecture system for easyintegration of new components• headend powering redundancy• possibility of hot installing/replacing modules• possibility to “clone” headend’s settingsfrom the saved configuration file77The technical platformThe basic unit of CMH3000 headend is 19” width 6U subrack.One subrack has 8 identical slots for 8 modules. Data and DC distributing, RF combining and RF input signal feeding of each module is realized throughpassive bus bar. Input RF signal distribution panel and rear mount output amplifier can be installed optionally.

Channel processing equipmentCompact modular headend CMH3000Main system featuresData communicationUp to 16 subracks can be connected to single USB port of PC. Hand held control unit can also be used for programming up to 16 modules in 2 subracks(connection on the front panel of power supply unit).DC distributionModern concept of single relatively high voltage DC power distribution is chosen. It allows to make easily reliable power redundancy system of the headend.Power supply connection in parallel or N+1 redundancy is available. All DC powering elements are based on high effective switch mode technology.78RF combining8 way RF combiner is incorporated in every subrack. There is possible further combining by system RF combiners and amplification by modular broadbandhigh linearity amplifier. In case of large installation, RF level of subracks can be increased by buffer drive amplifier for proper operation of system combiner.RF input feedingOptional input distribution panel can be connected to bus bar easily. It allows to make elegant implementation of individual input signal feeding needs.Also standard versions of distribution panel for N+1 redundancy and other typical installations are available.Technical specificationsT Y P ECMH3000InputFrequency range terrestrial TV 47-862 MHzradio FM87.5-108 MHzsatellite TV900-2150 MHzreturn path5-30 MHz, 5-55 MHz, 5-65 MHzVideo/AudioAudio frequency range 20 Hz - 15 kHzlevel775 mVVideo frequency range 20 Hz - 6 MHzlevel/impedance1 Vp-p/75 ΩRFFrequency range47-862 MHzLevel98 dBµVS/N, weighted58 dBSpurious attenuation60 dBReturn loss, output14 dB/40 MHz - 1.5 dB/octaveGeneralSupply voltage187-250 V~ ACMains line frequency50 HzEMC compatibilityEN50083-2Operating temperature0 ÷ +50 o CPC connectionUSB port

Channel processing equipmentCompact modular headend CMH3000Twin DVB-S/S2 receiver with ASI outputsDecoding DVB-S/S2 MPEG2 programs and converting to analog videoand stereo audio output signals; converting and descrambling DVB-S/S2multiplexes of services to DVB-ASI transport stream signal.• twin DVB-S/S2 receiver with 2x2 mirrored ASI outputs• 4:2:0 quality rate decoder of SD MPEG2 coded programswith PAL/SECAM video and audio outputs• HD/H.264 coded programs available on ASI outputs only• teletext reinsertion for further transmission• built-in video test generator• DVB subtitles decoding• BISS descrambling on A/V output• optionally BISS descrambling on ASI output• built-in double CI slot for CA modules• flexible routing of transport streams through CI slots• input RF loop through• input signal measurement & BER monitor• software and hardware watchdog timer• self dianostics and non-volatile event log• connectors:2xCI ports - PCMCIA2x2 ASI outputs - BNC2xRF inputs - type F2xRF outputs - type Fvideo/audio, output - 15 pins Sub-D socket79Technical specificationsT Y P Erd212Ordering number 02899Sections 2RF input frequency range pr.950 - 2150 MHzlevel/impedance45-85 dBµV/75 ΩLNB powering/control pr.0/14/18 V & 250 mA max. DiSEqC 1.0Modulation typeQPSK (DVB-S); QPSK, 8PSK (DVB-S2)Input data symbol rate1 ÷ 45 MspsVideo outputs frequency range20 Hz - 6 MHzlevel/impedance1 V/75 Ωvideo modepr.PAL/SECAMAudio outputs frequency range20 Hz - 15 kHzlevel775 mV related to 10 kΩadjusting rangepr.+12 ÷ -6 dBaudio modepr.L&R/L/R/muteASI outputs bit rate up to 80 Mbpsimpedance75 Ωpacket length188 bytesVideo testpr.ON/OFFCurrent consumption*0.45 ADimensions/Weight (packed)54x265x160 mm/1.5 kg* without LNB and CAM poweringpr.software control

Channel processing equipmentCompact modular headend CMH3000OFDM-PAL/SECAM receiver with ASI outputDVB-T receiver of MPEG2 coded programswith video, audio and DVB-ASI outputs.80• MPEG2 decoder 4:2:0 quality rate• input signal level measurement• BER monitor• teletext reinsertion• built-in CA interface• BISS mode decoder*• software/hardware watchdog timer• self dianostics and non-volatile event log• built-in video test generator• connectors:CI port - PCMCIAASI output - BNCvideo/audio, output - 15 pins Sub-D socketpr.Technical specificationsT Y P Esoftware controlrt112Ordering number 02826RF input frequency range pr.174-230 MHz, 470-862 MHzlevel/impedance30-88 dBµV/75 Ω**minimal S/N ratio19 dB*Channel bandwidthpr.7 MHz/8 MHzVideo output frequency range 20 Hz - 6 MHzlevel/impedance1 V/75 Ωvideo mode pr.PAL/SECAMAudio output frequency range 20 Hz - 15 kHzlevel775 mV related to 10 kΩadjusting range pr.± 6 dBaudio mode pr.L&R/L/R/muteASI output bit rate up to 80 Mbpsimpedance75 Ωpacket length188 bytesVideo testpr.ON/OFFCurrent consumption***0.3 ADimensions/Weight (packed)54x265x160 mm/1.5 kg* decoded program presents only on V/A output** QEF receiving with test signal 8k, QAM64, 1/4 GI, 2/3 FEC*** without LNB and CAM powering

Channel processing equipmentCompact modular headend CMH3000Twin DVB-ASI receiver-decoderDecoding DVB-ASI MPEG2 programs and converting to analog video andstereo audio output signals; descrambling of DVB-ASI transport stream signal.• twin DVB-ASI receiver-decoderwith 2x2 mirrored ASI outputs• input stream pass through to two mirrored ASI outputs• 4:2:0 quality rate decoder of SD MPEG2 codedprograms with PAL/SECAM video and audio outputs• teletext reinsertion for further transmission• built-in video test generator• DVB subtitles decoding• built-in double CI slot for CA modules• flexible routing of transport streams through CI slots• software/hardware watchdog timer• self dianostics and non-volatile event log• connectors:2xCI ports - PCMCIA2 ASI inputs - BNC2x2 ASI outputs - BNCvideo/audio, output - 15 pins Sub-D socket81Technical specificationsT Y P Era212Ordering number 13851Sections 2ASI input packet length 188 /204 bytesbit rateup to 72 Mbpsinput voltage200...880 mVppimpedance75 Ωreturn loss>15 dBVideo outputs frequency range 20 Hz - 6 MHzlevel/impedance1 V/75 Ωvideo mode pr.PAL/SECAMAudio outputs frequency range 20 Hz - 15 kHzlevel775 mV related to 10 kΩadjusting range pr.+12 ÷ -6 dBaudio mode pr.L&R/L/R/muteASI outputs bit rate up to 72 Mbpsimpedance75 Ωpacket length188 bytesVideo testpr.ON/OFFCurrent consumption*0.40 ADimensions/Weight (packed)54x265x160 mm/1.5 kg* without CAM poweringpr.software control

Channel processing equipmentCompact modular headend CMH3000Twin COFDM/QAM modulatorAVAILABLE 3 rdquarter 2011Processing of 2 DVB-ASI transport streams into DVB-T/DVB-C signals and convertingby integrated agile up-converter to RF channel in CATV frequency range.82• 2 full speed DVB-ASI interfaces• incoming transport stream bit rate measurement• output transport stream modulatedaccording to ETS 300 429 (QAM),ETS 300 744 (COFDM)• bit rate adaption with PCR restamping• TS processing (for option with remultiplexer only):PID remappingEPG multiplexingPCR restampingservice filteringPSI/SI regenerationNIT generationPMT version monitoring• user-friendly control panel• connectors:2xASI inputs - BNCSoftware options:- transparent QAM modulator- 2 ASI inputs remultiplexer & QAM modulator- transparent COFDM modulator- 2 ASI inputs remultiplexer & COFDM modulator- twin transparent COFDM modulator*Technical specificationsT Y P EOrdering number 13852ASI input/channels 2ASI input packet length 188 /204 bytesbit rateup to 200 Mbpsinput voltage200...1000 mVimpedance75 Ωreturn loss17 dBRF output frequency range pr.110 - 860 MHzlevel/impedance90 dBµV/75 Ωoutput level adjustment range pr.0 ÷ -15.5 dB by 0.5 dB stepCOFDMQAMroll off - 15 %MER pr.≥ 35 dB ≥ 40 dBmodulation pr.QPSK, QAM16, QAM64 QAM16, QAM32, QAM64, QAM128, QAM256channel bandwidth pr.7/8 MHz / 14/16 MHz* 4...8.3 MHzguard interval pr.1/4, 1/8, 1/16, 1/32 -code rate 1/2, 2/3, 3/4, 5/6, 7/8 -transmission mode 2K -symbol rate - 3.5 ÷ 7.2 MS/sCurrent consumption0.45 ADimensions/Weight (packed)54x265x160 mm/1.5 kg* RF bandwidth for twin modulator option - 2 adjacent channelsmx110pr.software control

Channel processing equipmentCompact modular headend CMH3000Twin DVB remultiplexer with simulcrypt interfaceTwin DVB-ASI remultiplexer with 8 input channels and 2 independentoutput channels. It has possibility to multiplex services, remap PIDs orchange identifiers of services. Supports EPG multiplexing, automaticrecognition of PMT changes and remultiplexing new PIDs.AVAILABLE 3 rdquarter 2011• EPG multiplexing• PMT version change monitoring• compact 19” rack• scrambling support on standard DVB-CSAthrough DVB simulcrypt interface• PCR restamping• automatic PID remapping• service filtering, PSI/SI regeneration including all original descriptors• remultiplexing of encrypted programs• NIT generation• LCN support• any service from any input channel can be selected• any stream of any service can be enabled/disabled• multilanguage character support - automatic recognition of charset• web based user-friendly control interfaces (CMH data bus)• all parameters are controlled by programming via CMH data bus• integrated LCD control panel and keyboard• connectors:ASI inputs/outputs - BNCsimulcrypt port - RJ45 Ethernet 10/100CMH data bus extension ports - 4P4CSoftware options:- single DVB remultiplexer (base option)- twin DVB remultiplexer- simulcrypt interface83Technical specificationsT Y P ETRS181Ordering number 13853ASI inputs channels 8bit rateup to 200 Mbit/s per inputpacket size188 /204 bytesmaximal PID count256 per inputmaximal PMT monitoring16 per inputASI outputs channels 2 independent + 2 parallelbit rateup to 200 Mbit/s (by step 1 Mbit/s)packet length188 bytesPower consumption187-250 V~ 50 Hz 4 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3 kg

Channel processing equipmentCompact modular headend CMH3000Twin TV modulatorsModulates analogue video/audio signal into VSB RF channelwith mono, stereo A2 or NICAM sound.84• double SAW filtering on IF• output level stabilization• carriers crystal stabilization• low level harmonics and intermodulation products• connectors:video/audio, input/output - 2x15 Sub-D socketmt120Astandard D/K/Lmt120Bstandard B/G/I*mt120Cstandard B/G/stereo A2mt120Estandard D/K/stereo A2Technical specificationsT Y P E mt120A mt120B mt120C mt120EOrdering number 11815 11816 11817 11817ETV standard D/K/L B/G/I* B/G/stereo A2 D/K/stereo A2Sections 2Frequency range47-862 MHzVideo input frequency range 20 Hz - 6 MHzlevel/impedance1 V ± 3 dB/75 ΩAudio input frequency range 20 Hz - 15 kHzlevel/impedance775 mV/10 kΩNICAM input level/impedance 85 dBµV/75 ΩRF output level/impedance 98 dBµV/75 ΩOutput level adjustment rangepr.0 ÷ -10 dB by 0.5 dB stepS/N ratio, weighted> 58 dBAdjusting A/V ratio pr. 10 ÷ 16 dB by 1 dB step 12 ÷ 18 dB by 1 dB stepVideo level adjustmentpr.+ 3 ÷ -3 dB by 1 dB stepAudio level adjustmentpr.+ 6 ÷ -6 dB by 2 dB stepIMD2/IMD3 spurious level< -60 dBCurrent consumption 0.44 A 0.46 ADimensions/Weight (packed)54x265x160 mm/1.58 kg* not suitable for insertion of I standard NICAM stereo sound signalpr.software control

Channel processing equipmentCompact modular headend CMH3000Twin TV channel convertersInput adjacent channel to output adjacent channelconverter of analogue TV programs.Works via low frequency IF and allows to changeprogram’s retransmitting frequency.• double SAW filtering on IF• high selectivity determinated by SAW filter• AGC system at input• V/A ratio adjustable, D/K (ct120A)• low level harmonics and intermodulation products• 12V DC for preamplifier poweringct120Astandard D/K/Lct120Bstandard B/G/I*85Technical specificationsT Y P E ct120A ct120BOrdering number 11813 11814Sections 2RF input frequency range pr. 48-100 MHz, 174-230 MHz, 470-862 MHz 47- 68 MHz, 174-230 MHz, 470-862 MHzTV standard pr.D/K/L B/G/I*level/impedance60-90 dBµV/75 Ωshut down input level pr.≤ 45 dBµVDC for external powering12 V & 0.3 ARF output frequency range pr.47-862 MHzlevel/impedance98 dBµV/75 ΩOutput level adjustment rangepr.0 ÷ -10 dB by 0.5 dB stepSound carrier adjustment rangepr.0 ÷ -10 dBNoise figure< 11 dBFrequency unstability < 5⋅10 -5Carriers accuracy± 20 kHzIMD2/IMD3 spurious level< -60 dBCurrent consumption0.61 ADimensions/Weight (packed)54x265x160 mm/1.6 kg* not suitable for conversion of I standard NICAM stereo sound channelspr.software control

Channel processing equipmentCompact modular headend CMH3000FM radio converterFour input FM radio program to four output FM radio programconverter. Works via low frequency IF and allows to change program’sretransmitting frequency.86• CCIR FM radio band converter• output level control• connector:RF input test point - type FTechnical specificationsT Y P Ecf140Ordering number 02811RF input frequency range pr.87.5-108 MHz by 50 kHz steplevel/impedance50-100 dBµV/75 Ωtest point attenuation0 dBRF output frequency range pr.87.5-108 MHzoutput level/impedance88 dBµV/75 Ωspurious attenuation60 dBoutput leveladjustment rangepr.20 dB by 1 dB stepCurrent consumption0.3 ADimensions/Weight (packed)54x265x160 mm/1.6 kgsoftware conpr.FM radio amplifiersWhole FM radio band amplifier for insertion ofFM radio programs into distribution network.• output level control• connector:RF input test point - type Faf110AOIRT FM band amplifieraf110BCCIR FM band amplifierTechnical specificationsT Y P E af110A af110BOrdering number 11826 11827Frequency range 66-74 MHz 87.5-108 MHzNoise figure≤ 5 dBGainpr.40 dBGain adjustment30 dB by 1 dB stepTest point attenuation-10 dBCurrent consumption0.15 ADimensions/Weight (packed)54x265x160 mm/1.1 kgsoftware conpr.

Channel processing equipmentCompact modular headend CMH3000Powering redundancy switcherControls status of connected power supplies and in case ofmultifunction of any PS switch on the reserve unit and generatesalarm message.• 6 way automatic N+1 powering redundancy switchersuitable for operation with UP100 power supply• LED status indication87Technical specificationsT Y P EUR100Ordering number 11822Input/output DC voltage24 VSwitching current9 A max.Current consumption0.1 ADimensions/Weight (packed)54x265x160 mm/1.4 kgPower supplyProvides the powering voltage for all components of CMH3000 system.This is high efficienty unit with short circuit and overload protection.• switch-mode technology• socket for handheld control unit connection PC100• suitable for operation in parallel connectionfor back-up function implementation• measurement of output level and currentIndication:• over temperature• overloadTechnical specificationsT Y P EUP100Ordering number 11823Power supply input voltage 187-250 V~ 50 Hzoutput voltage, current24 V 9 A max.power consumption245 W max.Dimensions/Weight (packed)54x265x160 mm/1.89 kg

Channel processing equipmentCompact modular headend CMH3000Output amplifiersAmplifying RF signal incoming from one or two base units UC180.88• 2 inputs high output level system amplifier• measurement of output level and current internal consumption• integrated switch for redundancy• test points of forward and return channelsTechnical specificationsT Y P E UA200R30 UA200R55 UA200R65Ordering number 11819 11820 11821Frequency range forward path 47-862 MHz 75-862 MHz 87-862 MHzreturn path 5-30 MHz 5-55 MHz 5-65 MHzGainpr.24 dB - 2 inputs, 28 dB - 1 inputOutput level CTB (-60 dB, EN50083-3)111 dBµVOutput level CSO (-60 dB, EN50083-3)112 dBµVNoise figure6 dB max.Slope adjustmentpr.10 dB by 0.5 dB stepGain adjustmentpr.10 dB by 0.5 dB stepTest point-20 dB max. (± 0.75 dB)Current consumption0.65 ADimensions/Weight (packed)54x265x160 mm/ 1.5 kgsoftware conpr.

Channel processing equipmentCompact modular headend CMH3000Base unit• 6U height 19” width subrack for up to 8 modules installation;internal DC & data distribution bus and output RF combiner• rear mount output amplifier can be integrated optionally• DC and data bus extension ports• possibility to supply DC from centralised PS• two base units could be interconnected for redundancyby DC powering• built-in switcher for setting of virtual addressTechnical specificationsT Y P EUC180Ordering number 11824RF inputs frequency range 5 - 2500 MHzinsertion loss≤ 0.75 dBRF combiner frequency range 47-862 MHzinsertion loss≤ 18 ± 1.5 dBPowering voltage DC 23-26 Vtotal current at feedingfrom external power supply6 A max.for external equipment1 A max.Mechanical width 489 mmheight267 mmmounting depth180 mmweight (packed)3.6 kg89Output combiner, amplifier• for assembling on the rear side of the base unit UC180UA1004 way active combinerUA102output amplifier with switchablenumber of inputs: 1 or 2Technical specificationsT Y P E UA100 UA102Ordering number 11873 02821Frequency range47-862 MHzInputs number, switchable 4 1 2Impedance75 ΩGain 0 ± 0.5 dB 28/16 dB (switchable) 23/11 dB (switchable)Flatness≤ 1 dBReturn loss > 14 dB ≥18 dB (40 MHz) - 1.5 dB/octaveIsolation between inputs20 dBOutput level CTB (-60 dB, EN50083-3) 95 dBµV 107 dBµVOutput level CSO ( -60 dB, EN50083-3) 96 dBµV 107 dBµVNoise figure 10 dB max. ≤ 6 dB ≤ 10 dBGain adjustment range - 0 ÷ 10 dBTest point-20 dB max. ± 0.5 dBCurrent consumption 0.14 A 0.26 A/0.17 AOperating temperature range0 ÷ +50 o CDimensions/Weight (packed)30x165x65 mm/0.4 kg

Channel processing equipmentCompact modular headend CMH3000Application diagrams90Transparent transmodulation from 6 DVB-Stransponders to 6 DVB-T multiplexesDVB-S programs processing from 4 sub-bands12 transponders each to:- 8 analog RF programs- remultiplexing and transmitting 2xDVB-C multiplexes- powering redundancy

Channel processing equipmentCompact modular headend CMH3000Application diagrams91DVB-ASI programs processing to:- 6 analog RF programs- 1 DVB-C multiplexDVB-S programs processing from 2 SAT, 4 sub-bandeach SAT, 8 transponders (single transponder fromsingle sub-band) by remultiplexing and scrambling to:- 1 DVB-C and 1 DVB-T multiplexes- powering redundancy

Channel processing equipmentCompact modular headend CMH3000Control and monitoring softwareTerra Link - free software program allows to control up to16 modules -2 subracks of CMH3000, MMH3000 in any configuration (could be downloadedfrom www.terraelectronics.com, section downloads).• PC is connected to the headend through appropriate USB interface• maximal count of the addressable modules - 16• automatic statusing of the headend configuration• user-friendly graphical presentation of all programmable parameters• obtaining information of the modules status• save/load configuration files of the headends settings to/from the PC92CMH Master - the program is intended for management and diagnostics ofthe headends CMH3000, MMH3000.• PC to the headend is connected through appropriate USB interface• maximal number of served modules - 256• maximal number of served subracks or groups - 16• automatic statusing of the headend configuration• user-friendly graphical presentation of all programmable parameters• obtaining information of the modules status• fixing of diagnostic information in log-file• changing headend’s settings in time by composed schedule of events• possibility to send alarm SMS and remote control of the headendthrough GSM network by PC with GSM terminalRemote monitoring subsystem “MasterWatch - remote monitoringsubsystem is a simple and cost effective way to get information about statusof remotely located optical nodes OD010, OD110, OD200 series. The set ofthe equipment allows to ensure two ways data communication service and thereal time status monitoring without additional plugged modules into the nodes.Remotely monitored parameters of the nodes: internal DC powering voltages,current consumption, temperature, input optical level, AC remote powering voltage,status of external access sensor, bias current of laser diode.Maximal number of monitored nodes - 256.USB-CMH data bus adapter UD104• CMH3000, MMH3000 headends PC control• supplied with program TERRA LinkOrdering number 13825USB-CMH data bus adapter UD102• CMH3000 headend control via USB port of the PC• for assembling on the rear side of the base unit UC180• supplied with program TERRA LinkOrdering number 13827

Channel processing equipmentCompact modular headend CMH3000Handheld control unit PC100• for programming up to 16 modules in 2 subracksof CMH3000, MMH3000 headends• connection to the data bus through connector,placed on the base unit• 2 line, 16 characters LCD display with back lightOrdering number 11825Remote control and monitoring server93• remote control for CMH3000, MMH3000 headends• management from anywhere using a web browser• software upgrade via HTTP• controls up to 256 modules• custom access levels for multiple users• I/O control for external devices• all parameters are controlled by programming via CMH data bus• integrated LCD control panel and keyboard• connectors:PC control port - USBLAN ports - RJ45 Ethernet 10/100CMH data bus extension ports - 4P4Cserial interface - RS232Technical specificationsT Y P EPCS200Ordering number 13828Configurable inputs-outputstwo optoisolated inputstwo relay outputsSpecial-purpose inputs-outputsUPS status porttemperature sensor input (1-Wire)Power consumption187-250V~ 50 Hz 3.5 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3 kg

Channel processing equipmentCompact modular headend CMH3000Accessories• 1U height 19” width blank panel 400.023Ordering number 1187494• 1U height 19” width ventilation panel 400.024Ordering number 11875• 1 module width blank panel 400.025Ordering number 11876T Y P E Ordering number DescriptionCable 400.38 11868 V/A cable (15 Sub-D/3xRCA, length 1.5 m ) for external equipment connection to modulators mt120XCable 400.39 11870 cable for interconnection of 2 subracks by powering 2xMATE-N-LOK 6 pins, length 0.5 mCable 625.31 21874 V/A cable (15 Sub-D/15 Sub-D, length 1.5 m) for interconnection of mt120x to receiver rd212Cable 404.39 11870A V/A cable (15 Sub-D/15 Sub-D, length 0.6 m) for interconnection of mt120x to receiver rt112Cable 400.40 21870 75 Ω coaxial cable (BNC-BNC, length 1.2 m) for ASI ports connectionCable 400.47 21871 V/A cable (15 Sub-D/3xRCA, length 1.5 m ) for external equipment connection to receiver rt112Cable 625.31-01 21878 V/A cable (15 Sub-D/15 Sub-D, length 0.3 m) for interconnection of mt120x to receiver rd212

Fiber optics equipment19” systemOptical transmitter 1310 nm• compact DFB cooled laser transmitter• automatic thermo-cooler control forconstant laser temperature• input signal level measurement• user selectable automatic/manualRF level control• AGC circuit for constant laser loading• various output powers available• advanced predistortion circuity• all parameters are controlled via CMH data bus• integrated LCD control panel and keyboard• connectors:RF input and test - type Foptical - SC/APCCMH data bus extension ports - 4P4C96Technical specificationsT Y P E MOS211A MOS211B MOS211C MOS211D MOS211E MOS211FOrdering number 02838A 02838B 02838C 02838D 02838E 02838FOptical power 6 dBm (4 mW) 8 dBm (6 mW) 10 dBm (10 mW) 12 dBm (16 mW) 13 dBm (20 mW) 14 dBm (25 mW)Type of laserDFBModulation typedirectOptical wave length1310 ± 10 nmRF frequency range47-862 MHzRF input level75...90 dBµVRelative intensity noise RIN< -155 dB/HzIntermodulation distortion CSO*> 62 dBIntermodulation distortion CTB*> 65 dBCarrier/noise ratio C/N*> 51 dBAGC range± 5 dBGain adjustmentpr.15 dB by 0.5 dB stepSlope adjustment controlpr.10 dB by 0.5 dB stepPower consumption187-250V~ 50 Hz 10 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3.8 kg* CENELEC 42 channels, level of receiver input optical power - 0 dBmpr.software control

Fiber optics equipment19” systemOptical transmitter 1550 nm• directly modulated 1550 nm transmitterfor CATV broadcast application up to 15 km• compact DFB cooled laser transmitter• automatic thermo-cooler control forconstant laser temperature• input signal level measurement• user selectable automatic/manualRF level control• AGC circuit for constant laser loading• advanced predistortion circuity• all parameters are controlled via CMH data bus• integrated LCD control panel and keyboard• connectors:RF input and test - type Foptical - SC/APCCMH data bus extension ports - 4P4CTechnical specificationsT Y P E MOS212B MOS212COrdering number 02841B 02841COptical power 8 dBm (6 mW) 10 dBm (10 mW)Type of laserDFBModulation typedirectOptical wave length1550 ± 10 nmRF frequency range47-862 MHzRF input level70...85 dBµVRelative intensity noise RIN< -155 dB/HzIntermodulation distortion CSO*> 58 dBIntermodulation distortion CTB*> 65 dBCarrier/noise ratio C/N*> 50 dBAGC range± 5 dBGain adjustmentpr.15 dB by 0.5 dB stepSlope adjustment controlpr.10 dB by 0.5 dB stepPower consumption187-250V~ 50 Hz 10 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3.8 kg97* CENELEC 42 channels, level of receiver input optical power - 0 dBmpr.software control

Fiber optics equipment19” systemOptical receiver• dual return path receiver with remote monitoringpossibility of OD010, OD110, OD200 series opticalnodes in the “MasterWatch” subsystem, page 113• AGC based on optical input power• all parameters are controlled via CMH data bus• integrated LCD control panel and keyboard• connectors:2xRF output and test - type Foptical - 2xSC/APCCMH data bus extension ports - 4P4C98Technical specificationsT Y P EROS121MOrdering number 02836Sections 2Frequency range5-200 MHzOptical input power-15...2 dBmOptical wave length1100-1600 nmRF output level95 dBµVOutput return losspr.18 dBGain adjustment30 dB by 0.5 dB stepRemote monitoring functionusing CMH Master softwarePower consumption187-250V~ 50 Hz 8 WOperating temperature range0 o ÷ + 50 o CDimensions/Weight (packed)485x58.5x171 mm/3 kgpr.software control

Fiber optics equipmentCompact modular headend CMH3000*Optical transmitter 1310 nm• compact DFB cooled directly modulatedlaser transmitter• automatic thermo-cooler control forconstant laser temperature• input signal level measurement• user selectable automatic/manualRF level control• AGC circuit for constant laser loading• various output powers available• advanced predistortion circuity• connectors:RF input and test - type Foptical - SC/APCTechnical specificationsT Y P E mo211A mo211B mo211C mo211D mo211E mo211FOrdering number 02837A 02837B 02837C 02837D 02837E 02837FOptical power 6 dBm (4 mW) 8 dBm (6 mW) 10 dBm (10 mW) 12 dBm (16 mW) 13 dBm (20 mW) 14 dBm (25 mW)Type of laserDFBModulation typedirectOptical wave length1310 ± 10 nmRF frequency range47-862 MHzRF input level75...90 dBµVRelative intensity noise RIN< -155 dB/HzIntermodulation distortion CSO**> 62 dBIntermodulation distortion CTB**> 65 dBCarrier/noise ratio C/N**> 51 dBAGC range± 5 dBGain adjustmentpr.15 dB by 0.5 dB stepSlope adjustment controlpr.10 dB by 0.5 dB stepCurrent consumption24 V 0.42 ADimensions/Weight (packed)54x265x160 mm/1.8 kg99* detailed description of CMH3000 headend on page 77** CENELEC 42 channels, level of receiver input optical power - 0 dBmpr. software control

Fiber optics equipmentCompact modular headend CMH3000*Optical transmitter 1550 nm• directly modulated 1550 nm transmitterfor CATV broadcast application up to 15 km• compact DFB cooled laser transmitter• automatic thermo-cooler control forconstant laser temperature• input signal level measurement• user selectable automatic/manualRF level control• AGC circuit for constant laser loading• advanced predistortion circuity• connectors:RF input and test - type Foptical - SC/APC100Technical specificationsT Y P E mo212B mo212COrdering number 02842B 02842COptical power 8 dBm (6 mW) 10 dBm (10 mW)Type of laserDFBModulation typedirectOptical wave length1550 ± 10 nmRF frequency range47-862 MHzRF input level70...85 dBµVRelative intensity noise RIN< -155 dB/HzIntermodulation distortion CSO**> 58 dBIntermodulation distortion CTB**> 65 dBCarrier/noise ratio C/N**> 50 dBAGC range± 5 dBGain adjustmentpr.15 dB by 0.5 dB stepSlope adjustment controlpr.10 dB by 0.5 dB stepCurrent consumption24 V 0.42 ADimensions/Weight (packed)54x265x160 mm/1.8 kg* detailed description of CMH3000 headend on page 77** CENELEC 42 channels, level of receiver input optical power - 0 dBmpr. software control

Fiber optics equipmentCompact modular headend CMH3000*Optical receiver• dual return path receiver with remote monitoringpossibility of OD010, OD110, OD200 series opticalnodes in the “MasterWatch” subsystem, page 113• two receivers per module• AGC based on optical input power• connectors:RF output and test - type Foptical - 2xSC/APCTechnical specificationsT Y P EOrdering numberFrequency rangeOptical input powerOptical wave lengthRF output levelOutput return lossGain adjustmentpr.Remote monitoring functionCurrent consumptionDimensions/Weight (packed)* detailed description of CMH3000 headend on page 77pr. software controlro121M02813M5-200 MHz-15...2 dBm1100-1600 nm95 dBµV18 dB30 dB by 0.5 dB stepusing CMH Master software24 V 0.26 A54x265x160 mm/1.5 kg101

Fiber optics equipmentOptical nodesOptical receiver• very compact optical receiver for cost sensitiveinstallations with extended frequency range 1002 MHz• electronic setting of all parameters• AGC based on optical input level• digital indication of optical input leveland other parameters• connectors:RF output - type Foptical - SC/APC102Technical specificationsT Y P EOD003Ordering number 02843Optical optical wave lenght 1100-1600 nminput optical input level (AGC range) -10 ...-3 dBmnoise current density≤ 8.0 pA/√HzRF output frequency range 47-1002 MHzimpedance75 Ωreturn loss16 dB/40 MHz-1.5 dB/octfrequency response± 0.75 dBoutput level (AGC controlled, 4.9% OMI)80 dBµVCTB (42 ch., 4.9% OMI, 80 dBµV)65 dBCSO (42 ch., 4.9% OMI, 80 dBµV)63 dBinterstage attenuatorpr.0-15 dB by 1 dB stepPower consumption230 V~ 50 Hz 4 WOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)133x73x39 mm/0.36 kgpr.software control

Fiber optics equipmentOptical nodesOptical receivers• electronic setting of all parameters• AGC based on optical input level• thermal compensation of RF output level drift• digital indication of optical input leveland other parameters• die-cast housing• connectors:RF output and test - type Foptical - SC/APCOD001Aoutput level 94 dBµVOD002output level 106 dBµVOD100output level 113 dBµVTechnical specificationsT Y P E OD001A OD002 OD100Ordering number 02823 02824 02825Optical wave lenght1100-1600 nmOptical input level (AGC range)-7 ...2 dBmNoise current density≤ 7.0 pA/√HzFrequency range47-862 MHzImpedance75 ΩReturn loss18 dB/40 MHz-1.5 dB/octFrequency response± 0.75 dBOutput level (AGC controlled, 4.9% OMI) 94 dBµV 106 dBµV 113 dBµVOutput level (CTB, EN50083-3)* 99 dBµV (42 ch.) 107 dBµV (42 ch.) 113 dBµV (42 ch.)Output level (CSO , EN50083-3)* 101 dBµV (42 ch.) 110 dBµV (42 ch.) 113 dBµV (42 ch.)Interstage attenuator pr.0-10 dB by 0.5 dB step 0-15.5 dB by 0.5 dB stepInterstage equalizer pr.0/5/10 dB 0-15.5 dB by 0.5 dB stepLoss in test point-20 dB ± 0.7 dBPower consumption 230 V~ 50 Hz 5 W or DC 12-18 V 4 W 230 V~ 50 Hz 6 W 230 V~ 50 Hz 14 WOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed) 185.5x95x47 mm/0.9 kg 213x138x76 mm (with fixing ears)/1.35 kg* output level (CTB, CSO) is measured with 5 dB (6 dB - OD100) interstage equalizer103pr.software control

Fiber optics equipmentOptical nodesOptical receiverOptical receiver with capability to monitor and controlall major functions via Ethernet.• monitor and control all major receiver parametersvia Ethernet (transmission protocol TCP/IP(supports SNMPv2c))• supplying with free management software OD_Explorer, page 105• input and output controllable ports for external devices• electronic setting of all parameters• AGC based on optical input level• 1 or 2 RF outputs, switchable• thermal compensation of RF output level drift• digital indication of optical input leveland other parameters• die-cast housing• connectors:RF output and test - type Foptical - SC/APCEthernet - RJ45104Technical specificationsT Y P EOD120Ordering number 02850Optical wave lenght1100-1600 nmOptical input level (AGC range)-7 ...2 dBmNoise current density≤ 7.0 pA/√HzFrequency range47-862 MHzImpedance75 ΩReturn loss18 dB/40 MHz-1.5 dB/octFrequency response± 0.75 dBOutput level (AGC controlled, 4.9% OMI)113 dBµVOutput level CTB (≤ 60 dB, 42 ch. Cenelec)*113 dBµVOutput level CSO (≤ 60 dB, 42 ch. Cenelec)*113 dBµVInterstage attenuatorpr.0-15 dB by 1 dB stepInterstage equalizerpr.0-15 dB by 1 dB stepLoss in test point-20 dB ± 0.7 dBPower consumption187-250 V~ 50 Hz 15 WOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)213x138x76 mm (with fixing earth)/1.4 kg* output level (CTB, CSO) is measured with 6 dB interstage equalizerpr.software controlRemotely monitored parameters:- temperature- optical input power- RF output level- internal DC supply voltageRemotely controlled parameters:- value of first attenuator- value of second attenuator- value of equalizerRemotely controllable ports:- alarm circuit input- relay output- UPS status port

Fiber optics equipmentOptical nodesApplication diagramApplication diagram of OD120 installation withpossibility to send security alarm signal, mainsfail signal and reset off Ethernet switch in caseof dissapearing response to PING.105Control and monitoring softwareOD Explorer - software for remote management of OD120 optical receivers:• control and diagnostic by SNMP protocol• automatic discovery of receivers OD120 in the LAN• user-friendly graphical presentation• embedded Telnet clientFree software program OD Explorer could be downloaded fromwww.terraelectronics.com, section downloads.

Fiber optics equipmentOptical nodesOptical receiver with return path transmitter• electronic setting of all parameters• AGC based on optical input level• digital indication of optical input level andother parameters on built-in LED display• switchable ingress blocking filter• uncooled FP laser diodefor CATV return path application• integrated data transmitter for remotemonitoring subsystem “MasterWatch”, page 113• 5 MHz pilot generator inside• connectors:optical - SC/APCRF output and test - type F106Technical specificationsT Y P EForward pathOptical wave lenghtOptical input level (AGC range)Noise current densityFrequency range*ImpedanceReturn lossFrequency responseOutput level (AGC controlled, 4.9% OMI)Output level (CTB, EN50083-3)Output level (CSO , EN50083-3)Interstage attenuatorpr.Interstage equalizerpr.Test pointReturn pathLaser diode typeOptical output power*Wave length**Frequency range*Ingress blocking filter attenuationRF input levelReturn path attenuatorpr.Input return lossPilot tonepr.Test pointGeneralPower consumptionOperating temperature rangeDimensions/Weight (packed)OD010*1100-1600 nm-7 ...2 dBm≤ 7.0 pA/√Hz47/75/87/108-1002 MHz75 Ω18 dB/40 MHz-1.5 dB/oct± 0.75 dB106 dBµV106 dBµV (42 ch.)108 dBµV (42 ch.)0-15 dB by 1 dB step0/3/6/9 dB-20 dB ± 0.7 dBFP1/2 mW1310 ± 10 nm5-30/55/65/85 MHz>20 dB up to 15 MHz;

Fiber optics equipmentOptical nodesOptical nodes• electronic setting of all parameters• AGC based on optical input level• digital indication of optical input level andother parameters on built-in LED display• switchable ingress blocking filter• uncooled FP laser diodefor CATV return path application• integrated data transmitter for remotemonitoring subsystem “MasterWatch”, page 113• 5 MHz pilot generator inside• die-cast housing• connectors:optical - SC/APCRF output and test - type FTechnical specificationsT Y P E OD110 OD110DForward pathOptical wave lenght1100-1600 nmOptical input level (AGC range)-7 ...2 dBmNoise current density≤ 7.0 pA/√HzFrequency range** (depending on diplexer)47/75/87/108-1002 MHzImpedance75 ΩReturn loss18 dB/40 MHz-1.5 dB/octFrequency response± 0.75 dBOutput level (AGC controlled, 4.9% OMI)113 dBµVOutput level (CTB, EN50083-3)111 dBµV (42 ch.)Output level (CSO , EN50083-3)112 dBµV (42 ch.)Interstage attenuatorInterstage equalizerpr.pr.0-15 dB by 1 dB step0-15 dB by 1 dB stepTest point-20 dB ± 0.7 dBReturn pathLaser diode typeFPOptical output power*1/2 mWWave length***1310 ± 10 nmFrequency range** (depending on diplexer)5-30/55/65/85 MHzIngress blocking filter attenuationRF input levelpr.>20 dB up to 15 MHz;

Fiber optics equipmentOptical nodesOptical nodesStructure diagram108Remotely monitored parameters of the nodes OD110, OD110Dusing monitoring subsystem “MasterWatch“:- temperature- power supply DC voltage- remote power supply AC voltage- optical input power- laser bias current- RF output level- node statusRemotely monitored ports:- external alarm circuit port- UPS status port

Fiber optics equipmentOptical nodesOptical receivers with plug-in return pathtransmitter• electronic setting of all parameters• AGC based on optical input level• plug-in return path optical transmitter withintegrated data transmitter for remotemonitoring subsystem “MasterWatch“, page 113• digital indication of optical input level andother parameters on built-in LED display• possibility to control node parametersby HMS transponderTechnical specificationsT Y P E OD200 OD200POrdering number 02816 02817Optical wavelenght1100-1600 nmOptical input level (AGC range)-7... 2 dBmNoise current densitymax. 8.0 pA/√HzFrequency range*47/75/87-862 MHzReturn path*5-30/55/65 MHzImpedance75 ΩReturn loss18 dB/40 MHz-1.5 dB/octFrequency response± 0.75 dBOutput level (AGC controlled, 4.9% OMI)114 dBµVOutput level CTB (EN50083-3)**112 dBµV (42 ch.)Output level CSO (EN50083-3)**113 dBµV (42 ch.)Interstage attenuatorpr.0-10 dB by 0.5 dB stepInterstage equalizerpr.0-10 dB by 0.5 dB stepReturn path attenuatorpr.0-25 dB by 1 dB stepReturn path ingress switchpr.0/-6/

Fiber optics equipmentOptical nodesOptical receivers with plug-in return pathtransmitter110Structure diagramOrdering notesBand no return path pl 01-0030/47 MHz pd 05-3055/75 MHz pd 05-5565/87 MHz pd 05-65Output 0 dB output1/no output 2 pl 02-003.5 dB output1/3.5 dB output 2 ps 01-032.0 dB output1/6.0 dB output 2 ps 01-061.5 dB output1/10 dB output 2 ps 01-101.0 dB output1/14 dB output 2 ps 01-140.5 dB output1/18 dB output 2 ps 01-18Return path 1 mW Tx po 01-1F2 mW Tx po 01-2F20 MHz RP band ph 01-20

Fiber optics equipmentOptical nodesPlug-in modules for OD200 (P)Plug-in return path optical transmitter• uncooled FP, DFB, CWDM laser diodefor CATV return path application applied• integrated data transmitter for remotemonitoring subsystem "MasterWatch", page 113• 5 MHz pilot generator inside• local laser bias current, pilot level controlvia front panel OD200X• 5-200 MHz transmission bandwidth• LED indication of module status• connector:optical - SC/APCTechnical specificationsT Y P E po 01-1F po 01-2F po 01-2DXX*Ordering number 02819 02820 *Laser diode type FP DFBOptical output power 1 mW 2 mWWave length 1310 ± 10 nm CWDM plan* ± 3 nmBandwidth5-65 MHzRF input level70 -95 dBµVRelative intensity noise RIN -130 dB/Hz -125 dB/Hz -145 dB/HzAdditional input5-200 MHzInput return loss18 dBPilot tone5 MHzFailure indicationLED indication on module coverPower consumption 1.8 W 2 WOperating temperature range-20 o ÷ + 50 o CDimensions80x71x18 mm111* CWDM transmitters:Wave length Type Ordering number1470 po 01-2D47 028641490 po 01-2D49 028651510 po 01-2D51 028661530 po 01-2D53 028671550 po 01-2D55 028681570 po 01-2D57 028691590 po 01-2D59 028701610 po 01-2D61 02871

Fiber optics equipmentOptical nodesPlug-in modules for OD110 (D), OD200 (P)Ingress blocking filterTechnical specificationsT Y P E ph 01-20Ordering number 02818Attenuationband pass >20 MHz, band stop < 15 MHzReturn loss*> 23 dBPlug-in diplexers112Technical specificationsT Y P E pd 05-30 pd 05-55 pd 05-65 pd 05-85Ordering number 01896 01897 01898 02894Frequency range return path 5-30 MHz 5-55 MHz 5-65 MHz 5-85 MHzforward path 47-1002 MHz 75-1002 MHz 87-1002 MHz 108-1002 MHzAttenuation 5 MHz ≤ 0.2 dB≤ 0.8 dB at 30 MHz ≤ 0.9 dB at 55 MHz ≤ 0.9 dB at 65 MHz ≤ 0.9 dB at 85 MHz≤ 0.8 dB at 47 MHz ≤ 0.9 dB at 75 MHz ≤ 0.9 dB at 87 MHz ≤ 0.9 dB at 108 MHz862 MHz ≤ 0.4 dBReturn loss*> 20 dB* at 40 MHz reduction - 1.5 dB/octaveHandheld control unit PC100• for control and monitoring parametersof the optical nodes OD200 (P)• connection through connector placed on theinternal panel of the optical node OD200 (P)• 2 line, 16 characters LCD display with back lightOrdering number 11825

Fiber optics equipmentOptical nodesRemote monitoring subsystem “MasterWatch”Remote monitoring subsystem is a simple and cost effective way to get information aboutstatus of remotely located optical nodes OD010, OD110, OD200 series. The set of the equipmentallows to ensure two ways data communication service and the real time status monitoring withoutadditional plugged modules into the nodes. Remotely monitored parameters of the nodes: internalDC powering voltages, current consumption, temperature, input optical level, AC remote poweringvoltage, status of external access sensor, bias current of laser diode.Maximal number of monitored nodes - 256.113List of the equipment:ROS121M or ro121M - return path optical receiver of CMH3000 headendOD010, OD110, OD110D, OD200, OD200P - optical nodepo 01-1F, po 01-2F, po 01-2DXX - plug-in return path optical transmitterCMH Master - control and monitoring software

Broadband equipmentHouse amplifiersApartment amplifiers• built-in adjustable gain regulators• die-cast housing inside plastic case• built-in power supplyAS036amplifier with two outputsAS038amplifier with four outputsAS036R65amplifier with two outputs;with passive return path from output #1AS038R65amplifier with four outputs;with passive return path from output #1AS039amplifier with two outputsAS039R65amplifier with two outputs;with passive return pathTechnical specificationsT Y P E AS036 AS036R65 AS038 AS038R65 AS039 AS039R65Ordering number 02510 02511 02512 02513 02514 02515Forward pathFrequency range 47-862 MHz 87-862 MHz 47-862 MHz 87-862 MHz 47-862 MHz 87-862 MHzOutputs number 2 4 2Gain 19 dB/47 MHz; 23 dB/862 MHz 16 dB/47 MHz; 20 dB/862 MHz 16 dB/47 MHz*; 20 dB/862 MHz*Gain adjustment 0 ÷ -16 dB 0 ÷ -12 dBMaximal output level IMD3=60 dB (DIN45004B) 103 dBµV 100 dBµV 100 dBµV*Input and output return loss >10 dB -Noise figure < 5 dB < 6 dBTest point -20 dB -Outputs decoupling > 16 dB -Return pathFrequency range - 5 - 65 MHz - 5-65 MHz - 5-65 MHzGain - -2 dB - -2 dB - -5 dB*Return loss - > 14 dB - > 14 dB - > 12 dB*GeneralPower consumption230 V~ 50 Hz 3 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed) 133x63x39 mm/0.36 kg 133x73x39 mm/0.36 kg 133x63x39 mm/0.36 kg* when loaded other symmetrical output115AS036AS038AS036R65AS038R65AS039AS039R65for AS036R65,AS038R65 onlyfor AS039R65 only

Broadband equipmentHouse amplifiersApartment amplifiers• splitband amplifiers with separategain adjustment in VHF and UHF ranges• die-cast housing inside plastic case• built-in power supplyHS016amplifier with two outputsHS017amplifier with four outputsHS018amplifier with two outputs;with low VHF gainHS019amplifier with four outputs;with low VHF gain116Technical specificationsT Y P E HS016 HS017 HS018 HS019Ordering number 02523 02524 02525 02526Frequency range47-240, 470-862 MHzOutputs number 2 4 2 4Gain (fixed slope pre-correction) 20-22 dB, 20-22 dB 18-20 dB, 18-20 dB 10-12 dB, 20-22 dB 8-10 dB, 18-20 dBGain adjustmentVHF 15 dB, UHF 12 dBMaximal output level IMD3=60 dB (DIN45004B) 104 dBµV 100 dBµV 104 dBµV 100 dBµVInput and output return loss> 10 dBNoise figureVHF < 4.5 dB, UHF 16 dBPower consumption230 V~ 50 Hz 3.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)133x73x 39 mm/0.36 kgfor HS016,HS017 only

Broadband equipmentHouse amplifiersMedium power amplifiers• built-in adjustable gain & slope regulators• die-cast housing inside plastic case• interstage switchable forward path gain allowingto reduce gain without affect noise figure of theamplifierHA024without return pathHA024R30passive return path 30 MHzHA024R65passive return path 65 MHzTechnical specificationsT Y P E HA024 HA024R30 HA024R65Ordering number 02520 02521 02522Forward pathFrequency range 47- 862 MHz 87- 862 MHzGain, switchable*18-20/27-30 dB (fixed slope pre-correction)Gain adjustment17 dBSlope adjustment17 dBFlatness* ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB, CSO (EN50083-3)97 dBµVTest point- 30 dB bi-directionalNoise figure8.5 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHzGain - -1.5 dB -2.5 dBReturn loss - > 14 dBGeneralPower consumption230 V~ 50 Hz 3.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)133x63x39 mm/0.36 kg117* for amplifier with return path measured 10 MHz after the starting frequency of forward pathHA024HA024R30HA024R65for HA024RXX only

Broadband equipmentHouse amplifiersMedium power amplifiers• discrete gain & slope regulators ensure high stabilityof operation (for HA130 series only)• built-in adjustable gain & slope regulators(for HA129 series only)• die-cast housing inside plastic case• interstage switchable forward path gain allowingto reduce gain without affect noise figure of theamplifier (for HA129 series only)HA129, HA130without return pathHA129R30, HA129R65active return path 30 MHz or 65 MHzHA130R30, HA130R65passive return path 30 MHz or 65 MHz118Technical specificationsT Y P E HA129 HA129R30 HA129R65 HA130 HA130R30 HA130R65Ordering number 10589 10590 10591 02527 02528 02529Forward pathFrequency range 47- 862 MHz 87- 862 MHz 47- 862 MHz 87- 862 MHzGain* 24-27/32-36 dB (fixed slope pre-correction), switchable 32 dBGain adjustment 17 dB 15 dB by 1 dB stepSlope adjustment 17 dB 15 dB by 1 dB stepFlatness* ±0.5 dB ±0.75 dB ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB, CSO (EN50083-3)100 dBµVTest point- 30 dB bi-directionalNoise figure 8.5 dB < 6.5 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHz - 5 - 30 MHz 5-65 MHzGain - 18-21 dB (fixed slope pre-correction) - - 3 dB -3.5 dBGain adjustment - 15 dB -Flatness - ±0.75 dB -Return loss - > 14 dB - > 14 dBNoise figure - 6 dB -Maximal output level IMD3=60 dB (DIN45004B) - 114 dBµV -GeneralPower consumption 230 V~ 50 Hz 2.5 W 230 V~ 50 Hz 3 W 230 V~ 50 Hz 4.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)133x63x39 mm/0.36 kg* for amplifier with return path measured 10 MHz after the starting frequency of forward pathHA129HA129R30HA129R65HA130HA130R30HA130R65for HA129RXX onlyfor HA130RXX only

Broadband equipmentHouse amplifiersMedium power amplifiers• built-in adjustable gain & slope regulators• metal-plastic housing for indoor mounting• output test point and screw terminal for equipotential bondingHA123medium gain - 28 dBHA123R30, HA123R65passive return path 30 MHz and 65 MHzHA126high gain - 34 dBHA126R30, HA126R65passive return path 30 MHz and 65 MHzTechnical specificationsT Y P E HA123 HA123R30 HA123R65 HA126 HA126R30 HA126R65Ordering number 01559 01566 01597 10539 10540 10541Frequency range forward path 47- 862 MHz 87- 862 MHz 47- 862 MHz 87- 862 MHzreturn path - 5-30 MHz 5-65 MHz - 5-30 MHz 5-65 MHzGain 28 dB 34 dBFlatness* ± 0.5 dB ± 0.7 dB ± 0.5 dB ± 0.7 dBGain adjustment20 dBSlope adjustment, typical18 dBMaximal output level IMD3=60 dB (DIN45004B)117 dBµVOutput level CTB, CSO (EN50083-3)101 dBµVInput and output return loss**> 14 dBNoise figure 6 dB 7 dBTest point attenuation- 30 dBPower consumption230 V~ 50 Hz 5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)107x148x53 mm/0.6 kg* for amplifiers with return path measured 10 MHz after the starting frequency of forward path** when f≥40 MHz, return loss ≥14 dB (40 MHz) - 1.5 dB/octave, but not less 10 dB119

Broadband equipmentHouse amplifiersMedium power amplifiers• built-in adjustable gain & slope regulators• metal-plastic housing• active return path• for indoor installation120Technical specificationsT Y P E HA128R30 HA128R65Ordering number 10524 10528Forward pathFrequency range 47- 862 MHz 87- 862 MHzGain30-34 dB (fixed slope pre-correction)Gain adjustment18 dBSlope adjustment18 dBFlatness*±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB, CSO (EN50083-3)101 dBµVNoise figure7 dBOutput test point-30 dBReturn pathFrequency range 5-30 MHz 5-65 MHzGain24 dBGain adjustment18 dBFlatness±0.75 dBReturn loss> 14 dBNoise figure6 dBMaximal output level IMD3=60 dB (DIN45004B)114 dBµVGeneralPower consumption230 V~ 50 Hz 6 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)107x148x53 mm/ 0.6 kg* measured 10 MHz after the starting frequency of forward pathMedium power splitband amplifier• splitband amplifier with separategain & slope adjustments in VHF & UHF ranges• metal-plastic housing for indoor mounting• output test point and screw terminal forequipotential bonding• built-in power supplyTechnical specificationsT Y P EHS003Ordering number 01590Frequency range VHF UHF47-414 MHz 470-862 MHzGain 29-33 dB 33-39 dBFlatness± 0.75 dBGain adjustment20 dBSlope adjustment 18 dB 6 dBMaximal output level IMD3=60 dB (DIN45004B) 119 dBµV 117 dBµVMaximal output level IMD2=60 dB (EN50083-3) 116 dBµV 114 dBµVInput and output return loss >14 dB >10 dBNoise figure< 6 dBPower consumption230 V~ 50 Hz 11 WOperating temperature range-20 0 ÷ +50 0 CDimensions/Weight (packed)180x87.5x50.5 mm/0.83 kg

Broadband equipmentHouse amplifiersMedium power amplifiers• built-in adjustable gain & slope regulators• switchable forward path gain• switchable passive or active return path• input attenuator for active return path• die-cast housingHA127without return pathHA127R30active return path 30 MHzHA127R65active return path 65 MHzTechnical specificationsT Y P E HA127 HA127R30 HA127R65Ordering number 10525 10526 10527Forward pathFrequency range 47- 862 MHz 87- 862 MHzGain, switchable*24-27/32-36 dB (fixed slope pre-correction)Gain adjustment18 dBSlope adjustment18 dBFlatness* ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB, CSO (EN50083-3)101 dBµVNoise figure7 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHzGain, switchable - 21-24 dB (fixed slope pre-correction)/-3 dB (passive)Gain adjustment - 18 dBInput attenuator - -10/0 dBFlatness - ±0.75 dBReturn loss - > 14 dBNoise figure - 6 dB (active)Maximal output level IMD3=60 dB (DIN45004B) - 114 dBµV (active)GeneralPower consumption 230 V~ 50 Hz 5 W 230 V~ 50 Hz 7.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)185x91x47 mm/ 0.8 kg121* for amplifiers with return path measured 10 MHz after the starting frequency of forward pathfor HA127RXX only

Broadband equipmentHouse amplifiersHigh power amplifiers122• push-pull output stage• built-in adjustable gain & slope regulators• interstage attenuator and equalizer• switchable passive or active return path• input attenuator for active return path• test points: input - bi-directional, output - directional• die-cast housingHA204local powered; without return pathHA204R30, HA204R65local powered; with return path 30 MHz or 65 MHzHD204remote powered; without return pathHD204R30, HD204R65remote powered; with return path 30 MHz or 65 MHzTechnical specificationsT Y P E HA204 HA204R30 HA204R65 HD204 HD204R30 HD204R65Ordering number 10511 10512 10513 10516 10514 10515Forward pathFrequency range 47- 862 MHz 87- 862 MHz 47- 862 MHz 87- 862 MHzGain*37 dBGain adjustment18 dBSlope adjustment18 dBFlatness* ±0.5 dB ±0.75 dB ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBInterstage attenuator-6/0 dBInterstage equalizer-6/0 dBMaximal output level CTB, CSO (EN50083-3)**105 dBµVNoise figure8 dBTest points-20 dBReturn pathFrequency range - 5-30 MHz 5-65 MHz - 5-30 MHz 5-65 MHzGain, switchable - 27/-4 dB - 27/-4 dBGain adjustment - 18 dB - 18 dBInput attenuator - -10/0 dB - -10/0 dBOutput equalizer - -6/-3/0 dB - -6/-3/0 dBFlatness - ±0.75 dB - ±0.75 dBReturn loss - > 14 dB - > 14 dBNoise figure - 7 dB (active, 0 dB attenuator) - 7 dB (active, 0 dB attenuator)Maximal output level IMD3=60 dB (DIN45004B) - 115 dBµV (active) - 115 dBµV (active)GeneralPower consumption 230 V~ 50 Hz 7.5 W 24-65 V~ 50 Hz 6.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)185x91x47 mm/ 0.68 kg* for amplifiers with return path measured 10 MHz after the starting frequency of forward path** with 6 dB interstage equalizerfor HA204RXX,HD204RXX only

Broadband equipmentHouse amplifiersHigh power amplifiers• built-in adjustable gain & slope regulators• switchable forward path gain• switchable passive or active return path• input attenuator for active return path• test points: input - bi-directional, output - directional• die-cast housingHA205local powered; without return pathHA205R30, HA205R65local powered; with return path 30 MHz or 65 MHzHD205R30, HD205R65remote powered; with return path 30 MHz or 65 MHzTechnical specificationsT Y P E HA205 HA205R30 HA205R65 HD205R30 HD205R65Ordering number 10529 10530 10531 10532 10533Forward pathFrequency range 47- 862 MHz 87- 862 MHz 47- 862 MHz 87- 862 MHzGain, switchable *27/36 dBGain adjustment18 dBSlope adjustment18 dBInterstage equalizer-6/-3/0 dBFlatness* ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB,CSO (EN50083-3)**109 dBµVNoise figure8 dBTest points-20 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHz 5 - 30 MHz 5-65 MHzGain, switchable - 27/-4 dBGain adjustment - 18 dBInput attenuator - -10/0 dBOutput equalizer - -6/-3/0 dBFlatness - ±0.75 dBReturn loss - > 14 dBNoise figure - 7 dB (active, 0 dB input attenuator)Maximal output level IMD3=60 dB (DIN45004B) - 115 dBµV (active)GeneralPower consumption 230 V~ 50 Hz 7.5 W 24-65 V~ 50 Hz 6.5 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)185x91x47 mm/0.7 kg123* for amplifiers with return path measured 10 MHz after the starting frequency of forward path** with 6 dB interstage equalizerfor HA205RXXHD205RXX only

Broadband equipmentHouse amplifiersHigh power amplifiersAVAILABLE 3 rdquarter 2011• switchable by 1 dB step, noninterruptablegain & slope regulators ensure high stability of operation• switchable forward path gain, passive or activereturn path, ingress blocking filter• input attenuator for active return path• test points: input - bi-directional, output - directional• die-cast housingHA208local powered; without return pathHA208R30, HA208R65local powered; with return path 30 MHz or 65 MHzHD208remote powered; without return pathHD208R30, HD208R65remote powered; with return path 30 MHz or 65 MHz124Technical specificationsT Y P E HA208 HA208R30 HA208R65 HD208 HD208R30 HD208R65Ordering number 10572 10573 10574 10575 10576 10577Forward pathFrequency range 47-862 MHz 87-862 MHz 47-862 MHz 87-862 MHzGain, switchable *27/36 dBGain adjustment15 dB by 1 dB stepSlope adjustment15 dB by 1 dB stepInterstage equalizer-6/-3/0 dBFlatness* ±0.5 dB ±0.75 dB ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB,CSO (EN50083-3)**109 dBµVNoise figure≤ 6.5 dBTest points-20 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHz - 5 - 30 MHz 5-65 MHzGain, switchable - 27/-3 dB - 27/-3 dBGain adjustment - 15 dB by 1 dB step - 15 dB by 1 dB stepIngress blocking filter attenuation - >20 dB up to 13.5 MHz; 20 dB up to 13.5 MHz; 14 dB - > 14 dBNoise figure - 6 dB (active, 0 dB input attenuator) - 6 dB (active, 0 dB input attenuator)Maximal output level IMD3=60 dB (DIN45004B) - 115 dBµV (active) - 115 dBµV (active)GeneralPower consumption 230 V~ 50 Hz 8 W 24-65 V~ 50 Hz 7 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)185x91x47 mm/0.7 kg* for amplifiers with return path measured 10 MHz after the starting frequency of forward path** with 6 dB interstage equalizerfor HA208RXX andHD208RXX only

Broadband equipmentHouse amplifiersHigh power amplifiers• switchable by 1 dB step, noninterruptablegain & slope regulators ensure high stability of operation• switchable forward path gain, passive or activereturn path, ingress blocking filter• input attenuator for active return path• test points: input - bi-directional, output - directional• die-cast housingHA209local powered; without return pathHA209R30, HA209R65local powered; with return path 30 MHz or 65 MHzHD209remote powered; without return pathHD209R30, HD209R65remote powered; with return path 30 MHz or 65 MHzAVAILABLE 3 rdquarter 2011Technical specificationsT Y P E HA209 HA209R30 HA209R65 HD209 HD209R30 HD209R65Ordering number 10578 10579 10580 10581 10582 10583Forward pathFrequency range 47-1002 MHz 87-1002 MHz 47-1002 MHz 87-1002 MHzGain, switchable *27/36 dBGain adjustment15 dB by 1 dB stepSlope adjustment15 dB by 1 dB stepInterstage equalizer-6/-3/0 dBFlatness* ±0.5 dB ±0.75 dB ±0.5 dB ±0.75 dBInput and output return loss> 14 dB at 40 MHz; -1.5 dB/oct., but not less 10 dBOutput level CTB,CSO (EN50083-3)**109 dBµVNoise figure≤ 6.5 dBTest points-20 dBReturn pathFrequency range - 5 - 30 MHz 5-65 MHz - 5 - 30 MHz 5-65 MHzGain, switchable - 27/-3 dB - 27/-3 dBGain adjustment - 15 dB by 1 dB step - 15 dB by 1 dB stepIngress blocking filter attenuation - >20 dB up to 13.5 MHz; 20 dB up to 13.5 MHz; 14 dB - > 14 dBNoise figure - 6 dB (active, 0 dB input attenuator) - 6 dB (active, 0 dB input attenuator)Maximal output level IMD3=60 dB (DIN45004B) - 115 dBµV (active) - 115 dBµV (active)GeneralPower consumption 230 V~ 50 Hz 8 W 24-65 V~ 50 Hz 7 WOperating temperature range-20 o ÷ +50 o CDimensions/Weight (packed)185x91x47 mm/0.7 kg125* for amplifiers with return path measured 10 MHz after the starting frequency of forward path** with 6 dB interstage equalizerfor HA209RXX andHD209RXX only

Broadband equipmentHouse amplifiers with changeable plug-in modulesMedium power amplifiers• flexibility provided by changeable plug-in modules:return path passive pd 02-xx or active pr 02-xx• change of plug-ins without demountingthe amplifier by easily removing the cover• supplied with plug-in links• push-pull output stage• built-in adjustable gain & slope regulators• metal-plastic housing for indoor mounting• output test point and screw terminal for equipotential bondingHA113Ulocal poweredHD113Uremote powered; switchable AC pass to output connector126Technical specificationsT Y P E HA113U HD113UOrdering number 01585 01586Frequency forward path* 47/75/87- 862 MHzrange return path* 5-30/55/65 MHzGain forward path 34 dBreturn path with pd 02-xx/pr 02-xx-1.5 /20 dBFlatness**± 0.5 dBGain adjustment20 dBSlope adjustment, typical18 dBOutput level CTB, CSO (EN50083-3)101 dBµVInput and output return loss***> 14 dBNoise figure< 6 dBTest point- 30 dBPower mains powering 230 V~ 50 Hz 6 W -consumption remote powering - 24-65 V~ 50 Hz 3.5 WAC pass current, switchable - 0.4 A max.Operating temperature range-20 o ÷ +50 o CDimensions/Weight (packed) 107x148x53 mm/0.66 kg 107x148x53 mm/0.43 kg* depends on return path modules: passive pd 02-xx or active pr 02-xx, page 129 (return path modules should be ordered separately)** for amplifiers with return path - ± 0.7 dB*** when f≥40 MHz, return loss ≥14 dB (40 MHz) - 1.5 dB/octave, but not less 10 dBHA113UHD113U

Broadband equipmentHouse amplifiers with changeable plug-in modulesHigh power amplifiers with interstage plug-ins• flexibility provided by changeable plug-in modules:return path passive pd 02-xx or active pr 02-xx,interstage attenuator JXP, slope precorrection andadjustable gain & slope regulators• supplied with plug-in links• GaAs push-pull output stage• weatherproof and RF-screened die-cast housing• test points: input - bi-directional, output - directionalBA203Ulocal powered; F connectorsBD203Uremote powered; switchable AC pass to output; F connectorsBD203U-5/8remote powered; switchable AC pass to output;Technical specificationsT Y P E BA203U BD203U BD203U-5/8Ordering number 00597 00598 00599Frequency forward path* 47/75/87- 862 MHzrange return path* 5-30/55/65 MHzGain forward path** 34 dBreturn path with pd 02-xx/pr 02-xx-2.5/19 dBFlatness***± 0.5 dBGain adjustment20 dBSlope adjustment, typical18 dBOutput level CTB, CSO (EN50083-3)****106 dBµVInput and output return loss*****> 14 dBNoise figure< 6.5 dBTest points- 20 dBPower mains powering 230 V~ 50 Hz 5 W -consumption remote powering - 24-65 V~ 50 Hz 6 WAC pass current, switchable - 2 A max.Operating temperature range-20 o ÷ +50 o CDimensions180x132x76 mm (main body); 213x132x76 mm (with fixing ears)Weight (packed) 1.4 kg 1.3 kg127* depends on plug-in modules: return path passive pd 02-xx or active pr 02-xx, page 129 (return path modules should be ordered separately)** with link 0 dB instead of interstage attenuator JXP-xx and interstage equalizer; 4 dB and 6 dB JXP-xx attenuators are supplied in scope of the amplifier delivery*** for amplifiers with return path - ± 0.7 dB**** measured with 6 dB interstage equalizer***** when f≥40 MHz, return loss ≥14 dB (40 MHz) - 1.5 dB/octave, but not less 10 dBBA203UBD203UBD203U-5/8

Broadband equipmentHouse amplifiers with changeable plug-in modulesHigh power amplifiers with interstage plug-ins• flexibility provided by changeable plug-in modules:return path passive pd 02-xx or active pr 02-xx,interstage attenuator JXP-xx, cable simulator, slopeprecorrection and adjustable gain & slope regulators• plug-in inverse equalizer• supplied with plug-in links• GaAs push-pull output stage• weatherproof and RF-screened die-cast housing• test points: input - bi-directional, output - directionalBA204U, BA213Ulocal powered; F connectorsBD204U, BD213Uremote powered; switchable AC pass to output; F connectorsBD204U-5/8, BD213U-5/8remote powered; switchable AC pass to output;input and output connector 5/8”128Technical specificationsT Y P E BA204U BD204U BD204U-5/8 BA213U BD213U BD213U-5/8Ordering number 00591 00593 00588 02501 02502 02503Frequency forward path* 47/75/87- 862 MHzrange return path* 5-30/55/65 MHzGain forward path** 36 dB 39 dBreturn path with pd 02-xx/pr 02-xx-2.5/19 dBFlatness***± 0.5 dBGain adjustment20 dBSlope adjustment, typical18 dBInverse cable equalizer0-9 dB in 1 dB stepOutput level CTB, CSO (EN50083-3)**** 107 dBµV 109 dBµVInput and output return loss*****> 14 dBNoise figure< 7 dBTest points- 20 dBPower mains powering 230 V~ 50 Hz 5.5 W - 230 V~ 50 Hz 11 W -consumption remote powering - 24-65 V~ 50 Hz 6 W - 24-65 V~ 50 Hz 12 WAC pass current, switchable - 2 A max. - 2 A max.Operating temperature range-20 o ÷ +50 o CDimensions180x132x76 mm (main body); 213x132x76 mm (with fixing ears)Weight (packed) 1.4 kg 1.3 kg 1.4 kg 1.3 kg* depends on plug-in modules: return path passive pd 02-xx or active pr 02-xx, page 129 (return path modules should be ordered separately)** with link 0 dB instead of interstage attenuator JXP-xx and interstage equalizer; 4 dB and 6 dB JXP-xx attenuators are supplied in scope of the amplifier delivery*** for amplifiers with return path - ± 0.7 dB**** measured with 6 dB interstage equalizer***** when f≥40 MHz, return loss ≥14 dB (40 MHz) - 1.5 dB/octave, but not less 10 dBBA204UBA213UBD204UBD204U-5/8BD213UBD213U-5/8

Broadband equipmentHouse amplifiers with changeable plug-in modulesPlug-in modulesActive plug-in return path modules• active module with adjustable equalizerand attenuator on the output of the amplifier• switchable ingress blocking filter• for use in house amplifiers with changeable plug-insHx113U, Bx203Uxxxx, Bx204Uxxxx, Bx213Uxxxx• should be odered separatelyTechnical specificationsT Y P E pr 02-30 pr 02-55 pr 02-65Ordering number 01882 01884 01885Frequency range return path 5-30 MHz 5-55 MHz 5-65 MHzforward path 47-862 MHz 75-862 MHz 87-862 MHzGain return path 21 dBforward path-1 dBOutput level IMD3=60 dB (DIN45004B)113 dBµVGain adjustment20 dBSlope adjustment20 dBNoise figure4 dBPassive plug-in return path modules• passive module composedof input/output diplex filters• switchable ingress blocking filter• for use in house amplifiers with changeable plug-insHx113U, Bx203Uxxxx, Bx204Uxxxx, Bx213Uxxxx• should be odered separately129Technical specificationsT Y P E pd 02-30 pd 02-55 pd 02-65Ordering number 01886 01888 01889Frequency range return path 5-30 MHz 5-55 MHz 5-65 MHzforward path 47-862 MHz 75-862 MHz 87-862 MHzAttenuation return path 1.5 dBforward path1 dBPlug-in interstage attenuators• supplying in scope of delivery of amplifiers:Bx203Uxxxx, Bx204Uxxxx, Bx213UxxxxTechnical specificationsT Y P E JXP-4 JXP-6Ordering number 01847 01848Frequency range5- 862 MHzAttenuation 4 dB 6 dBReturn loss≥16 dB

Broadband equipmentDistribution amplifiersUniversal distribution amplifier• combined type of power supply for local or remote powering• GaAs push-pull technology• flexibility provided by plug-in return path diplexers• plug-in interstage attenuator and equalizerfor improving amplifier performance• weatherproof and RF-screened die-cast housing• switch-mode power supply unit• transient protection at all inputs and outputs130Technical specificationsT Y P EDA213COrdering number 00894Frequency range*47/75/87-862 MHzReturn path*5-30/55/65 MHzInput and output impedance75 ΩGain, 20 0 C24 dB**Flatness± 0.5 dB/± 0.75 dB**Input and output return loss18 dB/40 MHz-1.5 dB/octaveGain adjustment18 dBSlope adjustment18 dBNoise figuremax. 6 dBOutput level CTB (EN50083-3)112 dBµV (42 ch.)Output level CSO (EN50083-3)113 dBµV (42 ch.)Mains voltage, 50 Hz 24÷65 V~ / 187-250 V~Power consumption, max.16/15 WCurrent consumption 24 V AC 0.95 A/-42 V AC 0.61 A/-65 V AC 0.45 A/-Maximal AC pass current7 ALoss in internal input test point (trasformer)-20 ± 2.0 dBLoss in internal output test point (directional)-20 ± 0.5 dBInput and outputs connectorsPG11Test point connectorsFHum modulation distance (7 A)min. 65 dBEnclosure category IP 64Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)229x159x87 mm (main body); 261x159x87 mm (with fixing ears)/2.5 kg* frequency range depends on inserted plug-in diplexer** 36 ± 0.75 dB for amplifier with plug-in pf 01-12All parameters are measured with links pl 01-00 instead of return path diplexers, plug-in input splitter; pl 02-00 instead of plug-in equalizer, plug-in output splitter,preamplifier; JXP-0.Output level (CTB, CSO) is measured with 6 dB interstage equalizer.

Broadband equipmentDistribution amplifiersUniversal distribution amplifier131Structure diagramOrdering notesBand no return path 2 x pl 01-0030/47 MHz 2 x pd 03-30 (pd 04-30)55/75 MHz 2 x pd 03-55 (pd 04-55)65/87 MHz 2 x pd 03-65 (pd 04-65)Input 0 dB input, no through pl 01-003.5 dB through/3.5 dB input ps 01-032.0 dB through/6.0 dB input ps 01-061.5 dB through/10 dB input ps 01-101.0 dB through/14 dB input ps 01-140.5 dB through/18 dB input ps 01-18Output 0 dB output1/no output 2 pl 02-003.5 dB output1/3.5 dB output 2 ps 01-032.0 dB output1/6.0 dB output 2 ps 01-061.5 dB output1/10 dB output 2 ps 01-101.0 dB output1/14 dB output 2 ps 01-140.5 dB output1/18 dB output 2 ps 01-18Return path 0 dB passive pl 02-00+JXP-00÷20 dB by 1 dB step, passive pl 02-00+JXP-XX20/25 dB gain 30 MHz, variable adjustments pr 04-30+JXP-XX20/25 dB gain 55 MHz, variable adjustments pr 04-55+JXP-XX20/25 dB gain 65 MHz, variable adjustments pr 04-65+JXP-XX20/25 dB gain 30 MHz, plug-in adjustments pr 05-30+3 x JXP-XX20/25 dB gain 55 MHz, plug-in adjustments pr 05-55+3 x JXP-XX20/25 dB gain 65 MHz, plug-in adjustments pr 05-65+3 x JXP-XXInterstage attenuator 0÷10 dB by 1 dB step JXP-XXthermal attenuator 1÷4 dBJXP-T-XXequalizer 862 MHzpe 03-XX

Broadband equipmentDistribution amplifiersUniversal distribution amplifiers• GaAs push-pull technology• flexibility provided by plug-in return path diplexers• plug-in interstage attenuator and equalizer for improving amplifier performance• plug-in inverse equalizer• weatherproof and RF-screened die-cast housing• switch-mode power supply unit• possibility to inject supply voltagefor remote powering (DA2XX)• transient protection at all inputs and outputs132Technical specificationsT Y P E DA23X DA23XP DA23XCFrequency range*47/75/87-862 MHzReturn path*5-30/55/65 MHzInput and output impedance75 ΩGain, 20 0 C36 dBFlatness± 0.75 dBInput and output return loss18 dB/40 MHz-1.5 dB/octaveInput attenuator0-18 dBInput cable equalizer0-18 dBInverse cable equalizer0-9 dB in 1 dB stepNoise figuremax. 6 dBOutput level CTB (EN50083-3)**112 dBµV (42 ch.)Output level CSO (EN50083-3)**113 dBµV (42 ch.)Mains voltage, 50 Hz 24÷65 V~ 187-250 V~ 24÷65 V~/187-250 V~Power consumption, max. 17 W 14.5 W 17/14.5 WCurrent consumption 24 V AC 1 A - 1 A/-42 V AC 0.67 A - 0.67 A/-65 V AC 0.5 A - 0.5 A/-Maximal AC pass current7 ALoss in internal input test point (bi-directional)-20 ± 2.0 dBLoss in internal output test point (directional)-20 ± 0.5 dBInput and outputs connectorsPG11Test point connectorsFHum modulation distance (7 A)min. 65 dBEnclosure category IP 64Operating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)229x159x87 mm (main body); 261x159x87 mm (with fixing ears)/2.5 kg* frequency range depends on inserted plug-in diplexer** output level (CTB, CSO) is measured with 6 dB interstage equalizerAll parameters are measured with links pl 01-00 instead of return path diplexers, plug-in input splitter; pl 02-00 instead of plug-in output splitter and in universal slot; JXP-0 insteadof input attenuator, cable equalizer, cable inverse equalizer; interstage attenuator and cable equalizer.DA233 plug-in JXP typeremote powering4variable inputattenuator & equalizerPClocal poweringcombined powering

Broadband equipmentDistribution amplifiersUniversal distribution amplifiersStructure diagram of DA233X133

Broadband equipmentDistribution amplifiersUniversal distribution amplifiersStructure diagram of DA234X134Ordering notesBand no return path 2 x pl 01-0030/47 MHz 2 x pd 03-30 (pd 04-30)55/75 MHz 2 x pd 03-55 (pd 04-55)65/87 MHz 2 x pd 03-65 (pd 04-65)Input 0 dB input, no through pl 01-003.5 dB through/3.5 dB input ps 01-032.0 dB through/6.0 dB input ps 01-061.5 dB through/10 dB input ps 01-101.0 dB through/14 dB input ps 01-140.5 dB through/18 dB input ps 01-18Output 0 dB output1/no output 2 pl 02-003.5 dB output1/3.5 dB output 2 ps 01-032.0 dB output1/6.0 dB output 2 ps 01-061.5 dB output1/10 dB output 2 ps 01-101.0 dB output1/14 dB output 2 ps 01-140.5 dB output1/18 dB output 2 ps 01-18Return path 0 dB passive pl 02-00+JXP-00÷20 dB by 1 dB step, passive pl 02-00+JXP-XX20/25 dB gain 30 MHz, variable adjustments pr 04-30+JXP-XX20/25 dB gain 55 MHz, variable adjustments pr 04-55+JXP-XX20/25 dB gain 65 MHz, variable adjustments pr 04-65+JXP-XX20/25 dB gain 30 MHz, plug-in adjustments pr 05-30+3 x JXP-XX20/25 dB gain 55 MHz, plug-in adjustments pr 05-55+3 x JXP-XX20/25 dB gain 65 MHz, plug-in adjustments pr 05-65+3 x JXP-XXInput adjusments cable simulator 0÷9 dB by 1 dB step JXP-XXattenuator 0÷20 dB by 1 dB step(for DA2X3X only)JXP-XXequalizer 0÷20 dB by 1 dB step(for DA2X3X only)JXP-XXInterstage attenuator 0÷10 dB by 1 dB step JXP-XXequalizer 0÷9 dB by 1 dB stepJXP-XXthermal attenuator 1÷4 dBJXP-T-XXUniversal slot 0 dB passive pl 02-00automatic gain control modulepg 01-XXXOrdering numberDA233 11862DA233P 11864DA233C 11866DA234 11863DA234P 11865DA234C 11867

Broadband equipmentDistribution amplifiersHouse connection amplifiers• GaAs push-pull technology• flexibility provided by plug-in return path diplexers• plug-in inverse equalizer• plug-in interstage attenuator and equalizerfor improving amplifier performance• weatherproof and RF-screened die-cast housing• switch-mode power supply unit• remote powering through input RF port• transient protection at input and outputTechnical specificationsT Y P E DA12X DA12XP DA13X DA13XPFrequency range*47/75/87-862 MHzReturn path*5-30/55/65 MHzInput and output impedance75 ΩGain, 20 0 C36 dBFlatness± 0.75 dBInput and output return loss18 dB/40 MHz-1.5 dB/octaveInput attenuator0-18 dBInput cable equalizer0-18 dBInverse cable equalizer0-9 dB in 1 dB stepNoise figuremax. 6 dBOutput level CTB (EN50083-3)** 108 dBµV (42 ch.) 111 dBµV (42 ch.)Output level CSO (EN50083-3)** 110 dBµV (42 ch.) 112 dBµV (42 ch.)Mains voltage 24÷65 V~ 50 Hz 187-250 V~ 50 Hz 24÷65 V~ 50 Hz 187-250 V~ 50 HzPower consumption max. 12.5 W max. 11 W max. 15.5 W max. 13.5 WCurrent consumption 24 V AC 0.77 A - 0.94 A -42 V AC 0.49 A - 0.59 A -65 V AC 0.36 A - 0.43 A -Loss in internal input test point (bi-directional)-20 ± 2.0 dBLoss in internal output test point (directional)-20 ± 0.5 dBInput connector***PG11 or FOutput connectorFTest point connectorsFOperating temperature range-20 o ÷ + 50 o CDimensions180x132x76 mm (main body); 213x132x76 mm (with fixing ears)Weight (packed) 1.6 kg 1.7 kg 1.6 kg 1.7 kg135* frequency range depends on inserted plug-in diplexer** output level (CTB, CSO) is measured with 6 dB interstage equalizer*** the amplifier is available with input connector PG11 thread or F femaleAll parameters are measured with links pl 01-00 instead of return path diplexers; JXP-0 instead of input attenuator, cable equalizer, cable inverse equalizer; interstageattenuator and cable equalizer.DA12 GaAs push-pull 6 plug-in JXP typeremote powering3GaAs power doubler7variable inputattenuator & equalizerPlocal poweringAPG11 input &F outputF input & F output

Broadband equipmentDistribution amplifiersHouse connection amplifiers136Structure diagram of DA1X6X

Broadband equipmentDistribution amplifiersHouse connection amplifiersStructure diagram of DA1X7XOrdering notesBand no return path 2 x pl 01-0030/47 MHz 2 x pd 03-30 (pd 04-30)55/75 MHz 2 x pd 03-55 (pd 04-55)65/87 MHz 2 x pd 03-65 (pd 04-65)Return path 0 dB passive pl 02-0020/25 dB gain 30 MHz, variable adjustments pr 04-3020/25 dB gain 55 MHz, variable adjustments pr 04-5520/25 dB gain 65 MHz, variable adjustments pr 04-6520/25 dB gain 30 MHz, plug-in adjustments pr 05-30, JXP-XX20/25 dB gain 55 MHz, plug-in adjustments pr 05-55, JXP-XX20/25 dB gain 65 MHz, plug-in adjustments pr 05-65, JXP-XXInput adjusments cable simulator 0÷9 dB by 1 dB step JXP-XXattenuator 0÷20 dB by 1 dB step(for DA1X6X only)JXP-XXequalizer 0÷20 dB by 1 dB step(for DA1X6X only)JXP-XXInterstage attenuator 0÷10 dB by 1 dB step JXP-XXequalizer 0÷9 dB by 1 dB stepJXP-XXOrdering numberDA126 11848DA126-A 11878DA126P 11850DA126P-A 11880DA127 11849DA127-A 11879DA127P 11851DA127P-A 11881DA136 11852DA136-A 11882DA136P 11854DA136P-A 11884DA137 11853DA137-A 11883DA137P 11855DA137P-A 11885137

Broadband equipmentDistribution amplifiersLine distribution amplifiers• GaAs push-pull technology• flexibility provided by plug-in return path diplexers• plug-in interstage attenuator and equalizerfor improving amplifier performance• plug-in inverse equalizer• weatherproof and RF-screened die-cast housing• switch-mode power supply unit• possibility to inject supply voltagefor remote powering (DA1XX)• transient protection at inputs and outputs138Technical specificationsT Y P E DA12X DA12XP DA13X DA13XPFrequency range*47/75/87-862 MHzReturn path*5-30/55/65 MHzInput and output impedance75 ΩGain, 20 0 C36 dBFlatness± 0.75 dBInput and output return loss18 dB/40 MHz-1.5 dB/octaveInput attenuator0-18 dBInput cable equalizer0-18 dBInverse cable equalizer0-9 dB in 1 dB stepNoise figuremax. 6 dBOutput level CTB (EN50083-3)** 108 dBµV (42 ch.) 111 dBµV (42 ch.)Output level CSO (EN50083-3)** 110 dBµV (42 ch.) 112 dBµV (42 ch.)Mains voltage 24÷65 V~ 50 Hz 187-250 V~ 50 Hz 24÷65 V~ 50 Hz 187-250 V~ 50 HzPower consumption max. 12.5 W max. 11 W max. 15.5 W max. 13.5 WCurrent consumption 24 V AC 0.77 A - 0.94 A -42 V AC 0.49 A - 0.59 A -65 V AC 0.36 A - 0.43 A -Maximal AC pass current4 ALoss in internal input test point (bi-directional)-20 ± 2.0 dBLoss in internal output test point (directional)-20 ± 0.5 dBInput and outputs connectors***PG11 or FTest point connectorsFHum modulation distance (4 A)min. 65 dBOperating temperature range-20 o ÷ + 50 o CDimensions/Weight (packed)180x125x76 mm (main body); 213x125x76 mm (with fixing ears)/1.4 kg* frequency range depends on inserted plug-in diplexer** output level (CTB, CSO) is measured with 6 dB interstage equalizer*** the amplifier is available with input or output connectors PG11 thread or F femaleAll parameters are measured with links pl 01-00 instead of return path diplexers; pl 02-00 instead of plug-in output splitter; JXP-0 instead of input attenuator, cable equalizer,cable inverse equalizer; interstage attenuator and cable equalizer.DA12 GaAs push-pull 3 plug-in JXP typeremote powering3GaAs power doubler4variable inputattenuator & equalizerPlocal poweringABPG11 input &PG11 outputs 1&2F input &F outputs 1&2PG11 input &F outputs 1&2

Broadband equipmentDistribution amplifiersLine distribution amplifiersStructure diagram of DA1X3X139

Broadband equipmentDistribution amplifiersLine distribution amplifiersStructure diagram of DA1X4X140Ordering notesBand no return path 2 x pl 01-0030/47 MHz 2 x pd 03-30 (pd 04-30)55/75 MHz 2 x pd 03-55 (pd 04-55)65/87 MHz 2 x pd 03-65 (pd 04-65)Output 0 dB output1/no output 2 pl 02-003.5 dB output1/3.5 dB output2 ps 01-032.0 dB output1/6.0 dB output2 ps 01-061.5 dB output1/10 dB output2 ps 01-101.0 dB output1/14 dB output2 ps 01-140.5 dB output1/18 dB output2 ps 01-18Return path 0 dB passive pl 02-0020/25 dB gain 30 MHz, variable adjustments pr 04-3020/25 dB gain 55 MHz, variable adjustments pr 04-5520/25 dB gain 65 MHz, variable adjustments pr 04-6520/25 dB gain 30 MHz, plug-in adjustments pr 05-30, JXP-XX20/25 dB gain 55 MHz, plug-in adjustments pr 05-55, JXP-XX20/25 dB gain 65 MHz, plug-in adjustments pr 05-65, JXP-XXInput adjusments cable simulator 0÷9 dB by 1 dB step JXP-XXattenuator 0÷20 dB by 1 dB step(for DA1X3X only)JXP-XXequalizer 0÷20 dB by 1 dB step(for DA1X3X only)JXP-XXInterstage attenuator 0÷10 dB by 1 dB step JXP-XXequalizer 0÷9 dB by 1 dB stepJXP-XXOrdering numberDA123 11840DA123-A 11886DA123-B 11887DA123P 11842DA123P-A 11890DA123P-B 11891DA124 11841DA124-A 11888DA124-B 11889DA124P 11843DA124P-A 11892DA124P-B 11893DA133 11844DA133-A 11894DA133-B 11895DA133P 11846DA133P-A 11898DA133P-B 11899DA134 11845DA134-A 11896DA134-B 11897DA134P 11847DA134P-A 12801DA134P-B 12802

Broadband equipmentDistribution amplifiersLine distribution amplifiers• GaAs push-pull technology• flexibility provided by plug-in return path diplexers and equalizer• all adjustments without interrupting service• switchable forward path frequency range 862 MHz or 1 GHz• switchable forward path gain 31 dB or 40 dB• return path frequency range up to 200 MHz(depending on inserted plug-in modules)• weatherproof and RF-screened die-cast housing• switch-mode power supply unit• possibility to inject supply voltage for remote powering (DA140D)• transient protection at input and outputTechnical specificationsT Y P E DA140D DA140Ordering number 12804 12805Forward pathFrequency range*47/75/87/108-862/1002 MHzInput and output impedance75 ΩGain, 20 0 C**40/31 dBFlatness± 0.75 dBInput and output return loss18 dB/40 MHz-1.5 dB/octaveInput attenuator0-15 dB by 1 dB stepInput cable equalizer0-15 dB by 1 dB stepInput cable simulator0/3/6/9 dBInterstage attenuator0/2/4/6 dBInterstage equalizer0/3/6/9 dBLoss in internal input test point (bi-directional)-20 ± 2.0 dBLoss in internal output test point (directional)-20 ± 0.75 dBNoise figuremax. 8 dBOutput level CTB (EN50083-3)***109 dBµV (42 ch.)Output level CSO (EN50083-3)***109 dBµV (42 ch.)Return pathFrequency range****5-30/55/65/85 MHzGain, 20 0 C30 dBFlatness±0.75 dB (5-65 MHz); ±1.0 dB (5-200 MHz)Input and output return loss18 dB/40 MHz-1.5 dB/octaveInput attenuator0/5/10/15dBOutput attenuator0-15 dB by 1 dB stepOutput equalizer0-15 dB by 1 dB stepIngress blocking filter attenuation>20 dB up to 13.5 MHz;

Broadband equipmentDistribution amplifiersLine distribution amplifiers142Structure diagram of DA140, DA140DOrdering notesBand 30/47 MHz 2 x pd 06-30 & pe 06-3055/75 MHz 2 x pd 06-55 & pe 06-5565/87 MHz 2 x pd 06-65 & pe 06-6585/108 MHz 2 x pd 06-85 & pe 06-85

Broadband equipmentDistribution amplifiersPlug-in modulesPlug-in linksTechnical specificationsT Y P E pl 01-00 pl 02-00Ordering number 01859 01860Attenuation≤ 0.3 dBReturn loss*> 23 dBPlug-in equalizersTechnical specificationsT Y P E pe 03-06 pe 03-09 pe 03-12Ordering number 01873 01874 01875Attenuation 47 MHz 6.0 dB 9.0 dB 12.2 dB450 MHz 3.0 dB 4.0 dB 5.5 dB606 MHz 2.0 dB 2.8 dB 3.8 dB862 MHz 0.5 dB 0.6 dB 0.7 dBReturn loss*> 25 dBPlug-in splittersTechnical specificationsT Y P E ps 01-03 ps 01-06 ps 01-10 ps 01-14 ps 01-18Ordering number 01876 01877 01878 01879 01881Insertion loss (IN-OUT) 5 MHz 3.3 dB 2.0 dB 1.5 dB 1.0 dB 1.0 dB47 MHz 3.3 dB 2.0 dB 0.9 dB 0.8 dB 0.8 dB862 MHz 3.8 dB 2.8 dB 1.4 dB 1.3 dB 1.3 dBTap loss (IN-TAP) 5 MHz 3.3 dB 5.5 dB 10.5 dB 14.0 dB 18.5 dB47 MHz 3.3 dB 5.5 dB 10.5 dB 14.5 dB 18.0 dB862 MHz 3.8 dB 6.5 dB 10.5 dB 14.5 dB 18.5 dBIsolation 5-862 MHz ≥ 22 dB ≥ 20 dB ≥ 22 dB ≥ 27 dB ≥ 27 dBReturn loss* > 23 dB > 20 dB143Plug-in diplexersTechnical specificationsT Y P E pd 03-30 pd 03-55 pd 03-65Ordering number 01896 01897 01898Frequency range return path 5-30 MHz 5-55 MHz 5-65 MHzforward path 47-862 MHz 75-862 MHz 87-862 MHzAttenuation 5 MHz ≤ 0.3 dB≤ 1.3 dB at 30 MHz ≤ 1.3 dB at 55 MHz ≤ 1.4 dB at 65 MHz≤ 1.3 dB at 47 MHz ≤ 1.3 dB at 75 MHz ≤ 1.3 dB at 87 MHz862 MHz ≤ 0.6 dBReturn loss*> 20 dBStop band loss≥ 50 dB* at 40 MHz reduction - 1.5 dB/octave

Broadband equipmentDistribution amplifiersPlug-in modulesPlug-in diplexers• ingress blockingTechnical specificationsT Y P E pd 04-30 pd 04-55 pd 04-65Ordering number 02800 02801 02802Frequency range return path 18-30 MHz 18-55 MHz 18-65 MHzforward path 47-862 MHz 75-862 MHz 87-862 MHzAttenuation 18 MHz ≤ 1.5 dBReturn loss*Stop band loss≤ 1.5 dB at 30 MHz ≤ 1.5 dB at 55 MHz ≤ 1.5 dB at 65 MHz≤ 1.3 dB at 47 MHz ≤ 1.3 dB at 75 MHz ≤ 1.4 dB at 87 MHz862 MHz ≤ 0.6 dB> 20 dB≥ 50 dBPlug-in interstage attenuatorsTechnical specificationsT Y P E JXP-0 JXP-1 JXP-2 JXP-3 JXP-4 JXP-5 JXP-6Ordering number 01844 01835 01846 01836 01847 01837 01848Frequency range5-862 MHzAttenuation 0 dB 1 dB 2 dB 3 dB 4 dB 5 dB 6 dBReturn loss≥ 16 dB144Technical specificationsT Y P E JXP-7 JXP-8 JXP-9 JXP-10 JXP-11 JXP-12 JXP-13Ordering number 10865 01827 01849 01800 10866 01829 10867Frequency range5-862 MHzAttenuation 7 dB 8 dB 9 dB 10 dB 11 dB 12 dB 13 dBReturn loss≥ 16 dBTechnical specificationsT Y P E JXP-14 JXP-15 JXP-16 JXP-17 JXP-18 JXP-19 JXP-20Ordering number 10868 10869 10870 10871 10872 10873 10874Frequency range5-862 MHzAttenuation 14 dB 15 dB 16 dB 17 dB 18 dB 19 dB 20 dBReturn loss≥ 16 dBPlug-in thermal attenuatorsTechnical specificationsT Y P E JXP-T-1 JXP-T-2 JXP-T-3 JXP-T-4Ordering number 11835 11836 11837 11838Attenuation shift in dB per 10 o C -0.04 dB/ o C -0.08 dB/ o C -0.15 dB/ o C -0.23 dB/ o CAttenuation -20 o C 1.26 dB 2.52 dB 3.98 dB 5.50 dB23 o C 1.09 dB 2.18 dB 3.33 dB 4.51 dB45 o C 1.00 dB 2.0 dB 3.0 dB 4.0 dBReturn loss ≥ 18 dB ≥ 18 dB ≥ 18 dB ≥ 20 dB* at 40 MHz reduction - 1.5 dB/octave

Broadband equipmentDistribution amplifiersPlug-in modulesPlug-in preamplifierTechnical specificationsT Y P E pf 01-12Ordering number 01845Frequency range47-862 MHzGain12 dBNoise figure4 dBPlug-in return path amplifiersTechnical specificationsT Y P E pr 04-30 pr 04-55 pr 04-65Ordering number 01891 01893 01894Frequency range 5-30 MHz 5-55 MHz 5-65 MHzGain, switchable20/25 dBGain adjustment, variable20 dBSlope adjustment, variable15 dBLoss in output test point-20 ± 0.5 dBOutput level IMD3=60 dB (DIN45004B) 118 dBµVIMD2=60 dB (EN50083-3)115 dBµVNoise figure5 dBPlug-in return path amplifiersTechnical specificationsT Y P E pr 05-30 pr 05-55 pr 05-65Ordering number 11832 11833 11834Frequency range 5-30 MHz 5-55 MHz 5-65 MHzGain, switchable20/25 dBGain adjustment in 1 dB step20 dBSlope adjustment in 1 dB step15 dBLoss in output test point-20 ± 0.5 dBOutput level IMD3=60 dB (DIN45004B) 118 dBµVIMD2=60 dB (EN50083-3)115 dBµVNoise figure5 dB145Plug-in automatic gain control module• pilot type continuous wave (CW), unmodulated ormodulated analog TV signal not scrambled by thesync suppression methodTechnical specificationsT Y P E pg 01Ordering number*Pilot frequency rangeControl rangeRegulation accuracyInitial loss* ordering number example for pilot frequency 423.25 MHz: pg 01-423.2554-862 MHz by step 50 kHz-2 ÷-10 dB≤ 0.4 dB6 dB

Braodband equipmentDistribution amplifiersPlug-in modules for DA140(D)Plug-in diplexersTechnical specificationsT Y P E pd 06-30 pd 06-55 pd 06-65 pd 06-85Ordering number 12870 12871 12872 12873Frequency range return path 5-30 MHz 5-55 MHz 5-65 MHz 5-85 MHzforward path 47-1002 MHz 75-1002 MHz 87-1002 MHz 108-1002 MHzAttenuation 5 MHz ≤ 0.2 dB≤ 1.3 dB at 30 MHz ≤ 1.3 dB at 55 MHz ≤ 1.4 dB at 65 MHz ≤ 1.5 dB at 85 MHz≤ 1.3 dB at 47 MHz ≤ 1.3 dB at 75 MHz ≤ 1.3 dB at 87 MHz ≤ 1.4 dB at 108 MHz1002 MHz ≤ 0.5 dBReturn loss*> 20 dB* at 40 MHz reduction - 1.5 dB/octavePlug-in return path equalizersTechnical specificationsT Y P E pe 06-30 pe 06-55 pe 06-65 pe 06-85Ordering number 12874 12875 12876 12877Frequency range 5-30 MHz 5-55 MHz 5-65 MHz 5-85 MHz146

Braodband equipmentAccessoriesNetwork power supplyTransformer• for supplying AC powerfor remotely powered equipmentTechnical specificationsT Y P E PVS630 230/60VOrdering number00807AMains voltage230 V~ ACOutput voltage60 V~ ACMaximal output current10.5 AEnclosure category IP 54Dimensions/Weight (packed)146x272x138 mm/9.5 kgPower inserter• power insertion device through 5/8” portTechnical specificationsT Y P EJ-PIMOrdering number 01821Insertion loss 5-40 MHz 1.0 dB40-470 MHz 1.0 dB470-1000 MHz 1.0 dBReturn loss 5-40 MHz 25 dB40-470 MHz 20 dB470-1000 MHz 16 dBCurrent pass max.10 AHum modulation- 66 dB @ 10 A147Power entry port• AC & DC entry port;adapter, 2xscrewed clamps/port 5/8”Ordering number 01980

Broadband equipmentOverview of house amplifiers148Return path Forward path Powering voltage/Type Frequency range Fixed/ Active/ Frequency range Gain Output level Power consumption IN/OUT PagePlug-in Passive IMD3=60 dB CTB CSO max. connectors(DIN45004B) (EN50083-3) (EN50083-3)AS036 - - - 47-862 MHz 23 dB 103 dBµV - - 230 V~ 3 W F 115AS036R65 5-65 MHz F P 87-862 MHz 23 dB 103 dBµV - - 230 V~ 3 W F 115AS038 - - - 47-862 MHz 20 dB 100 dBµV - - 230 V~ 3 W F 115AS038R65 5-65 MHz F P 87-862 MHz 20 dB 100 dBµV - - 230 V~ 3 W F 115AS039 - - - 47-862 MHz 20 dB 100 dBµV - - 230 V~ 3 W F 115AS039R65 5-65 MHz F P 87-862 MHz 20 dB 100 dBµV - - 230 V~ 3 W F 115HS016 - - - 47-240, 470-862 MHz 20-22dB, 20-22dB 104 dBµV - - 230V~ 3.5 W F 116HS017 - - - 47-240, 470-862 MHz 18-20dB, 18-20dB 100 dBµV - - 230V~ 3.5 W F 116HS018 - - - 47-240, 470-862 MHz 10-12dB, 20-22dB 104 dBµV - - 230V~ 3.5 W F 116HS019 - - - 47-240, 470-862 MHz 8-10 dB, 18-20 dB 100 dBµV - - 230V~ 3.5 W F 116HA024 - - - 47-862 MHz 18-20/27-30 dB - 97 dBµV 97 dBµV 230 V~ 3.5 W F 117HA024R30 5-30 MHz F P 47-862 MHz 18-20/27-30 dB - 97 dBµV 97 dBµV 230 V~ 3.5 W F 117HA024R65 5-65 MHz F P 87-862 MHz 18-20/27-30 dB - 97 dBµV 97 dBµV 230 V~ 3.5 W F 117HA129 - - - 47-862 MHz 24-27/32-36 dB - 100 dBµV 100 dBµV 230 V~ 2.5 W F 118HA129R30 5-30 MHz F A 47-862 MHz 24-27/32-36 dB - 100 dBµV 100 dBµV 230 V~ 3 W F 118HA129R65 5-65 MHz F A 87-862 MHz 24-27/32-36 dB - 100 dBµV 100 dBµV 230 V~ 3 W F 118HA130 - - - 47-862 MHz 32 dB - 100 dBµV 100 dBµV 230 V~ 4.5 W F 118HA130R30 5-30 MHz F P 47-862 MHz 32 dB - 100 dBµV 100 dBµV 230 V~ 4.5 W F 118HA130R65 5-65 MHz F P 87-862 MHz 32 dB - 100 dBµV 100 dBµV 230 V~ 4.5 W F 118HA123 - - - 47-862 MHz 28 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA123R30 5-30 MHz F P 47-862 MHz 28 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA123R65 5-65 MHz F P 87-862 MHz 28 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA126 - - - 47-862 MHz 34 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA126R30 5-30 MHz F P 47-862 MHz 34 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA126R65 5-65 MHz F P 87-862 MHz 34 dB 117 dBµV 101 dBµV 101 dBµV 230 V~ 5 W F 119HA128R30 5-30 MHz F A 47-862 MHz 30-34 dB - 101 dBµV 101 dBµV 230 V~ 6 W F 120HA128R65 5-65 MHz F A 87-862 MHz 30-34 dB - 101 dBµV 101 dBµV 230 V~ 6 W F 120HS003 - - - 47-414, 470-862 MHz 33 dB/39 dB 117 dBµV - - 230 V~ 11 W F 120HA127 - - - 47-862 MHz 24-27/32-36 dB - 101 dBµV 101 dBµV 230V~ 5 W F 121HA127R30 5-30 MHz F A/P 47-862 MHz 24-27/32-36 dB - 101 dBµV 101 dBµV 230V~ 7.5 W F 121HA127R65 5-65 MHz F A/P 87-862 MHz 24-27/32-36 dB - 101 dBµV 101 dBµV 230V~ 7.5 W F 121HA204 - - - 47-862 MHz 37 dB - 105 dBµV 105 dBµV 230V~ 7.5 W F 122HA204R30 5-30 MHz F A/P 47-862 MHz 37 dB - 105 dBµV 105 dBµV 230V~ 7.5 W F 122HA204R65 5-65 MHz F A/P 87-862 MHz 37 dB - 105 dBµV 105 dBµV 230V~ 7.5 W F 122HD204 - - - 47-862 MHz 37 dB - 105 dBµV 105 dBµV 24-65 V~ 6.5 W F 122HD204R30 5-30 MHz F A/P 47-862 MHz 37 dB - 105 dBµV 105 dBµV 24-65 V~ 6.5 W F 122HD204R65 5-65 MHz F A/P 87-862 MHz 37 dB - 105 dBµV 105 dBµV 24-65 V~ 6.5 W F 122HA205 - - - 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7.5 W F 123HA205R30 5-30 MHz F A/P 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7.5 W F 123HA205R65 5-65 MHz F A/P 87-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7.5 W F 123HD205R30 5-30 MHz F A/P 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 24-65 V~ 6.5 W F 123HD205R65 5-65 MHz F A/P 87-862 MHz 27/36 dB - 109 dBµV 109 dBµV 24-65 V~ 6.5 W F 123HA208 - - - 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 124HA208R30 5-30 MHz F A/P 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 124HA208R65 5-65 MHz F A/P 87-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 124HD208 - - - 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 124HD208R30 5-30 MHz F A/P 47-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 124HD208R65 5-65 MHz F A/P 87-862 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 124HA209 - - - 47-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 125HA209R30 5-30 MHz F A/P 47-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 125HA209R65 5-65 MHz F A/P 87-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 8 W F 125HD209 - - - 47-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 125HD209R30 5-30 MHz F A/P 47-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 125HD209R65 5-65 MHz F A/P 87-1002 MHz 27/36 dB - 109 dBµV 109 dBµV 230V~ 7 W F 125HA113U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 34 dB - 101 dBµV 101 dBµV 230 V~ 6 W F 126HD113U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 34 dB - 101 dBµV 101 dBµV 24-65 V~ 3.5 W F 126BA203U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 34 dB - 106 dBµV 106 dBµV 230 V~ 5 W F 127BD203U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 34 dB - 106 dBµV 106 dBµV 24-65 V~ 6 W F 127BD203U-5/8 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 34 dB - 106 dBµV 106 dBµV 24-65 V~ 6 W 5/8” 127BA204U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 107 dBµV 107 dBµV 230 V~ 5.5 W F 128BD204U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 107 dBµV 107 dBµV 24-65 V~ 6 W F 128BD204U-5/8 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 107 dBµV 107 dBµV 24-65 V~ 6 W 5/8” 128BA213U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 39 dB - 109 dBµV 109 dBµV 230 V~ 11 W F 128BD213U 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 39 dB - 109 dBµV 109 dBµV 24-65 V~ 12 W F 128BD213U-5/8 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 39 dB - 109 dBµV 109 dBµV 24-65 V~ 12 W 5/8” 1281)frequency range depends on inserted plug-in diplexer2)depends on inserted active or passive plug-in module

Broadband equipmentOverview of distribution amplifiersReturn path Forward path Powering voltage/Type Frequency range Fixed/ Active/ Frequency range Gain Output level Power consumption IN/OUT PagePlug-in Passive IMD3=60 dB CTB CSO max. connectors(DIN45004B) (EN50083-3) (EN50083-3)DA213C 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 24 dB - 112 dBµV 113 dBµV 24-65 V~ 187-250 V~ PG11 130DA233 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 24-65 V~ 17 W PG11 132DA233P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 187-250 V~ 14.5 W PG11 132DA233C 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 24-65 V~ 187-250 V~ PG11 132DA234 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 24-65 V~ 17 W PG11 132DA234P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 187-250 V~ 14.5 W PG11 132DA234C 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 112 dBµV 113 dBµV 24-65 V~ 187-250 V~ PG11 132DA126 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 24-65 V~ 12.5 W PG11/F 135DA126P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 187-250 V~ 11 W PG11/F 135DA127 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 24-65 V~ 12.5 W PG11/F 135DA127P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 187-250 V~ 11 W PG11/F 135DA136 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 24-65 V~ 15.5 W PG11/F 135DA136P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 187-250 V~ 13.5 W PG11/F 135DA137 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 24-65 V~ 15.5 W PG11/F 135DA137P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 187-250 V~ 13.5 W PG11/F 135DA123 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 24-65 V~ 12.5 W PG11 138DA123P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 187-250 V~ 11 W PG11 138DA124 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 24-65 V~ 12.5 W PG11 138DA124P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 108 dBµV 110 dBµV 187-250 V~ 11 W PG11 138DA133 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 24-65 V~ 15.5 W PG11 138DA133P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 187-250 V~ 13.5 W PG11 138DA134 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 24-65 V~ 15.5 W PG11 138DA134P 5-30/55/65 MHz 1) P A/P 2) 47/75/87-862 MHz 1) 36 dB - 111 dBµV 112 dBµV 187-250 V~ 13.5 W PG11 138DA140D 5-30/55/65/85 MHz 1) P A/P 2) 47/75/87/108-862/1002 MHz 1) 40/31 dB - 109 dBµV 109 dBµV 24-65 V~ 10 W PG11 141DA140 5-30/55/65/85 MHz 1) P A/P 2) 47/75/87/108-862/1002 MHz 1) 40/31 dB - 109 dBµV 109 dBµV 187-250 V~ 11 W PG11 1411)frequency range depends on inserted plug-in diplexer2)depends on inserted active or passive plug-in module149

Cables and network accessoriesCoaxial cablesDrop cablesF5967BV - drop cable RG59, 67% braidF660BV - drop cable RG6, 60% braidF660BVM - drop cable RG6, 60% braid,1.3 mm messengerF1160BV - drop cable RG11, 60% braidF1160BE - drop cable RG11, 60% braid, floodedF1160BVM - drop cable RG11, 60% braid,1.8 mm messengerTechnical specifications 59 series 6 series 11 seriesT Y P E F5967BV F660BV F660BVM F1160BV F1160BE F1160BVMOrdering number 00914B 00915BW 10906 00916B 00917 00918BCorrosion protection - - - - + -Diameter of steel messenger - - 1.30 mm - - 1.83 mmCenter conductor diameter 0.81 mm 1.02 mm 1.63 mmDiameter over dielectric 3.66 mm 4.57 mm 7.11 mmDiameter over first shield (tape) 3.84 mm 4.75 mm 7.29 mmDiameter over jacket 6.10 mm 7.54 mm 10.03 mmJacket wall thickness 0.81 mm 0.84 mm 1.07 mmImpedance 75 Ω 75 Ω 75 ΩVelocity of propagation 85 % 85 % 85 %Attenuation 100 m (20 °C) 5 MHz 2.82 dB 1.90 dB 1.25 dB55 MHz 6.73 dB 5.25 dB 3.15 dB83 MHz 8.04 dB 6.40 dB 3.87 dB187 MHz 11.81 dB 9.35 dB 5.74 dB250 MHz 13.45 dB 10.82 dB 6.72 dB300 MHz 14.60 dB 11.64 dB 7.38 dB350 MHz 15.75 dB 12.63 dB 7.94 dB400 MHz 16.73 dB 13.61 dB 8.53 dB450 MHz 17.72 dB 14.44 dB 9.02 dB500 MHz 18.70 dB 15.23 dB 9.51 dB600 MHz 20.34 dB 16.73 dB 10.43 dB750 MHz 22.87 dB 18.54 dB 11.97 dB865 MHz 24.67 dB 20.01 dB 13.05 dB1000 MHz 26.64 dB 21.49 dB 14.27 dB151

Cables and network accessoriesCoaxial cablesDistribution cablesQR540JCA - 13.72 mm distribution cableQR540JCASS - 13.72 mm distribution cable,floodedQR540JCAM109 - 13.72 mm distribution cablewith messengerQR715JCASS - 18.16 mm distribution cable,floodedQR715JCAM188 - 18.16 mm distribution cablewith messengerQR860JCASS - 21.84 mm distribution cable,flooded152Technical specifications QR540 QR540 QR540 QR715 QR715 QR860T Y P EJCA JCASS JCAM109 JCASS JCAM188 JCASSOrdering number 00919 10919 00910 00901 00923 00903Impedance75 ± 2 ΩCenter conductor diameter 3.15 mm 4.22 mm 5.16 mmDiameter over dielectric 13.03 mm 17.42 mm 21.03 mmDiameter over outer conductor 13.72 mm 18.16 mm 21.84 mmOuter conductor thickness 0.34 mm 0.37 mm 0.41 mmJacket versions diameter over jacket 15.49 mm 19.94 mm 24.38 mmjacket wall thickness 0.89 mm 0.89 mm 1.27 mmArmored versions diameter over corrugated armor 17.27 mm 21.71 mm 26.06 mmdiameter over outer jacket 19.30 mm 23.75 mm 28.19 mmthickness of outer jacket 1.02 mm 1.02 mm 1.02 mmMessenger version diameter of steel messenger 2.77 mm 4.78 mm 4.78 mmAttenuation 100 m 5 MHz 0.46 dB 0.36 dB 0.30 dB(20 °C) 55 MHz 1.54 dB 1.18 dB 1.05 dB83 MHz 1.90 dB 1.48 dB 1.31 dB181 MHz 2.89 dB 2.23 dB 1.94 dB250 MHz 3.38 dB 2.66 dB 2.30 dB300 MHz 3.71 dB 2.92 dB 2.49 dB400 MHz 4.33 dB 3.44 dB 2.89 dB450 MHz 4.59 dB 3.67 dB 3.12 dB500 MHz 4.89 dB 3.90 dB 3.28 dB600 MHz 5.38 dB 4.30 dB 3.61 dB750 MHz 6.07 dB 4.89 dB 4.07 dB865 MHz 6.56 dB 5.31 dB 4.36 dB1000 MHz 7.12 dB 5.74 dB 4.72 dB

Cables and network accessoriesFiber optical cablesSingle-mode fiber specificationsPhysical characteristicsT Y P E8W optical fiber dispersion-unshifted, matched cladCladding diameter 125.0 ± 0.7 µmCore/clad offset < 0.5 µmCoating diameter - uncolored 245 ± 10 µmCoating diameter - colored 254 ± 7 µmCoating/cladding concentricity error, max 12 µmClad non-circularity < 1 %Mechanical characteristicsT Y P EProof testCoating strip forceFiber curlDynamic fatigue parameterMacrobending-maximum (100 turns)Macrobending-maximum (1 turn @ 32mm mandrel)8W optical fiber dispersion-unshifted, matched clad0.69 Gpa1.3 - 8.9 N> 4 m> 18 nd0.05 dB (1310/1550 nm @ 50 mm)0.05 dB (1625 nm @ 60 mm)0.05 dB @ 1550 nmOptical characteristicsT Y P E8W optical fiber dispersion-unshifted, matched cladMaximum attenuation - loose tube cable 1310 nm 0.34 dB/km1385 nm 0.31 dB/km1550 nm 0.22 dB/kmMode field diameter 1310 nm 9.2 ± 0.3 µm1385 nm 9.6 ± 0.6 µm1550 nm 10.4 ± 0.5 µmGroup refractive index 1310 nm 1.4661385 nm 1.4661550 nm 1.467Dispersion - maximum 1310 nm 3.5 ps/(nm-km) from 1285 to 1330 nm1550 nm 18 ps/(nm-km)Optical characteristicsT Y P EPoint defects-maximumCutoff wavelengthZero dispersion wavelengthZero dispersion slope-maximumPolarization mode dispersion link design value8W optical fiber dispersion-unshifted, matched clad0.1 dB< 1260 nm1302-1322 nm0.09 ps/(km-nm-nm)< 0.06 ps/sqrt(km)153Environmental characteristicsT Y P ETemperature dependence (-60 0 C to +85 0 C)Temperature humidity cycling(-10 0 C to +85 0 C up to 95% RH)Water immersion (23 + 2 0 C)Heat aging (85 + 2 0 C)8W optical fiber dispersion-unshifted, matched clad< 0.05 dB< 0.05 dB< 0.05 dB< 0.05 dB

Cables and network accessoriesFiber optical cablesAll-dielectric outdoor cableThe Dry Loose Tube cable design is suitable for buried, underground or aerial applications. This family of gel-free stranded loose tube cablesuses all-dry water-blocking technology and reduced diameter buffer tubes. The design is completely gel-free, yet it provides full water blockingprotection for outside plant applications.PE outer jacketStrength elementsRipcord (1)Water swellable tape2.5 mm gel-free buffer tubesBinder250 micron fibersDielectric strength memberFiber count 002-060 062-072 074-096 098-120 122-144 146-216 218-288Outer diameter 10.5 mm 10.9 mm 12.5 mm 14.1 mm 16.1 mm 16.1 mm 18.5 mmWeight 71 kg/km 77 kg/km 101 kg/km 129 kg/km 166 kg/km 140 kg/km 189 kg/kmMinimum bend radius loaded 21.0 cm 21.8 cm 25.0 cm 28.2 cm 32.2 cm 32.2 cm 37.0 cmunloaded 10.5 cm 10.9 cm 12.5 cm 14.1 cm 16.1 cm 16.1 cm 18.5 cmMax. tensile load short term 2700 Nlong term800 NOperating temperature/Installation temperature-40 0 ÷ +70 0 C/-30 0 ÷ +60 0 COrdering info: D-XXX-LN-8W-M-ZZ-NSXXX - numbers of fibersZZ - number of fibers per tubeSingle jacket single armor outdoor cable154PE outer jacketSteel tape armoringStrength elementsRipcord (1)Water swellable tape2.5 mm gel-free buffer tubesBinder250 micron fibersDielectric strength memberFiber count 002-060 062-072 074-096 098-120 122-144 146-216 218-288Outer diameter 12.0 mm 12.4 mm 13.9 mm 15.5 mm 17.2 mm 17.6 mm 20.0 mmWeight 127 kg/km 133 kg/km 166 kg/km 198 kg/km 239 kg/km 219 kg/km 279 kg/kmMinimum bend radius loaded 24.0 cm 24.8 cm 27.8 cm 31.0 cm 34.4 cm 35.2 cm 40.0 cmunloaded 12.0 cm 12.4 cm 13.9 cm 15.5 cm 17.2 cm 17.6 cm 20.0 cmMax. tensile load short term 2700 Nlong term800 NOperating temperature/Installation temperature-40 0 ÷ +70 0 C/-30 0 ÷ +60 0 COrdering info: D-XXX-LA-8W-M-ZZ-NSXXX - numbers of fibersZZ - number of fibers per tube

Cables and network accessoriesFiber optical cablesAll-dielectric outdoor cableThe Arid-Core (outdoor) Loose tube cable design is suitable for buried, underground or aerial applications. This family of stranded loose tubecables eliminates the greasy flooding compound around the buffer tubes. The tough outer jacketing and gel filling within the buffer tubes, combinedwith Arid-Core moisture barrier around the buffer tubes, provides full water blocking protection for outside plant applications.PE outer jacketStrength elementsRipcord (1)Water swellable tape3.0 mm gel filled buffer tubesBinder250 micron fibersDielectric strength memberFiber count 002-060 062-072 074-096 098-120 122-144 146-216 218-288Outer diameter 11.6 mm 12.6 mm 14.6 mm 16.7 mm 18.8 mm 18.8 mm 21.8 mmWeight 91 kg/km 110 kg/km 148 kg/km 189 kg/km 238 kg/km 216 kg/km 292 kg/kmMinimum bend radius loaded 23.2 cm 25.2 cm 29.2 cm 33.4 cm 37.6 cm 37.6 cm 43.6 cmunloaded 11.6 cm 12.6 cm 14.6 cm 16.7 cm 18.8 cm 18.8 cm 21.8 cmMax. tensile load short term 2700 Nlong term800 NOperating temperature/Installation temperature-40 0 ÷ +70 0 C/-30 0 ÷ +60 0 COrdering info: O-XXX-LN-8W-M-12-NSXXX - numbers of fibersZZ - number of fibers per tubeSingle jacket single armor outdoor cablePE outer jacketSteel tape armoringStrength elementsRipcord (2)Water swellable tape3.0 mm buffer tubesBinder250 micron fibersDielectric strength member155Fiber count 002-060 062-072 074-096 098-120 122-144 146-216 218-288Outer diameter 13.1 mm 14.0 mm 16.1 mm 18.2 mm 20.3 mm 20.3 mm 23.3 mmWeight 153 kg/km 177 kg/km 219 kg/km 266 kg/km 316 kg/km 329 kg/km 430 kg/kmMinimum bend radius loaded 26.2 cm 28.0 cm 32.2 cm 36.4 cm 40.6 cm 40.6 cm 46.6 cmunloaded 13.1 cm 14.0 cm 16.1 cm 18.2 cm 20.3 cm 20.3 cm 23.3 cmMax. tensile load short term 2700 Nlong term800 NOperating temperature/Installation temperature-40 0 ÷ +70 0 C/-30 0 ÷ +60 0 COrdering info: O-XXX-LA-8W-M-12-NSXXX - numbers of fibers

Cables and network accessoriesPassivesSplitters• die-cast housing• connectors F type(center conductordiameter 0.5 ÷ 1.1 mm)J-2SPLIT2 way 1 GHz splitterJ-3SPLIT3 way 1 GHz splitterJ-4SPLIT4 way 1 GHz splitterJ-6SPLIT6 way 1 GHz splitterTechnical specificationsT Y P E J-2SPLIT J-3SPLIT J-4SPLIT J-6SPLITOrdering number 00753 00755 00759 00754Insertion loss (IN-OUT) 5-40 MHz 3.5 dB 5.6 dB 6.8 dB 9.0 dB40-470 MHz 3.7 dB 5.8 dB 7.0 dB 9.0 dB470-1000 MHz 4.0 dB 6.5 dB 8.0 dB 11 dBIsolation (OUT-OUT) 5-40 MHz 30 dB 30 dB 30 dB 30 dB40-470 MHz 30 dB 30 dB 30 dB 28 dB470-1000 MHz 25 dB 25 dB 25 dB 25 dBReturn loss 5-40 MHz 22 dB 22 dB 22 dB 21 dB40-470 MHz 22 dB 22 dB 22 dB 20 dB470-1000 MHz 20 dB 18 dB 18 dB 18 dB• die-cast housing• connectors F type(center conductor diameter 0.5 ÷ 1.1 mm)J-2SPLIT SAT2 way 2.4 GHz splitterJ-3SPLIT SAT3 way 2.4 GHz splitterJ-4SPLIT SAT4 way 2.4 GHz splitter156Technical specificationsT Y P E J-2SPLIT SAT* J-3SPLIT SAT* J-4SPLIT SAT*Ordering number 00771 00757 00758Insertion loss (IN-OUT) 5-40 MHz 4.0 dB 7.0 dB 8.0 dB40-1000 MHz 4.5 dB 8.0 dB 8.5 dB1000-2050 MHz 5.8 dB 10.0 dB 11.0 dB2050-2400 MHz 4.0 dB 7.0 dB 8.0 dBIsolation (OUT-OUT) 5-40 MHz 14 dB 22 dB 23 dB40-1000 MHz 22 dB 22 dB 22 dB1000-2050 MHz 22 dB 20 dB 22 dB2050-2400 MHz 22 dB 20 dB 22 dBReturn loss 5-40 MHz 12 dB 10 dB 10 dB40-1000 MHz 15 dB 12 dB 12 dB1000-2050 MHz 14 dB 12 dB 12 dB2050-2400 MHz 12 dB 12 dB 12 dB* DC pass from outputs to input

Cables and network accessoriesPassivesLow intermodulation distortion splitters• die-cast housing• for use in two way CATV networks• connectors F type(center conductor diameter 0.5 ÷ 1.1 mm)J-2SPLIT(S)2 way 1 GHz splitterJ-3SPLIT(S)3 way 1 GHz splitterJ-4SPLIT(S)4 way 1 GHz splitterTechnical specificationsT Y P E J-2SPLIT(S) J-3SPLIT(S) J-4SPLIT(S)Ordering number 00753S 00755S 00759SInsertion loss 5-40 MHz 3.5 dB 5.8 dB 7.0 dB40-470 MHz 3.7 dB 6.0 dB 7.5 dB470-860 MHz 3.8 dB 6.5 dB 7.8 dB860-1000 MHz 4.0 dB 6.8 dB 8.3 dBMutual isolation 5-40 MHz 18 dB 23 dB 25 dB40-470 MHz 30 dB 30 dB 28 dB470-860 MHz 30 dB 28 dB 28 dB860-1000 MHz 28 dB 25 dB 25 dBReturn loss 5-40 MHz 20 dB 20 dB 18 dB40-470 MHz 22 dB 22 dB 22 dB470-860 MHz 22 dB 20 dB 20 dB860-1000 MHz 20 dB 20 dB 20 dBSingle carrier level 5-30 MHz 120 dBµVHarmonic distortion 40-1000 MHz ≤10 dBµV157

Cables and network accessoriesPassivesTaps• die-cast housing• connectors F type (center conductor diameter 0.5 ÷ 1.1 mm)J-1TAP/XX1 way 1 GHz tapsTechnical specificationsT Y P E J-1TAP/6 J-1TAP/8 J-1TAP/12 J-1TAP/16 J-1TAP/20 J-1TAP/24Ordering number 00714 00717 00711 00715 00719 00720Tap loss 6 ± 1.0 dB 8 ± 1.0 dB 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dB 24 ± 1.0 dBInsertion loss (IN-OUT) 5-40 MHz 2.5 dB 1.8 dB 0.8 dB 0.8 dB 0.8 dB 0.8 dB40-470 MHz 2.8 dB 2.0 dB 0.8 dB 0.8 dB 0.8 dB 0.8 dB470-1000 MHz 3.0 dB 2.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dBIsolation (TAP-OUT) 5-40 MHz 25 dB 30 dB 35 dB 40 dB 45 dB 50 dB40-470 MHz 24 dB 28 dB 30 dB 32 dB 40 dB 42 dB470-1000 MHz 23 dB 25 dB 26 dB 28 dB 32 dB 40 dBReturn loss 5-40 MHz 22 dB 22 dB 22 dB 22 dB 22 dB 22 dB40-470 MHz 20 dB 20 dB 20 dB 22 dB 22 dB 22 dB470-1000 MHz 18 dB 20 dB 20 dB 20 dB 20 dB 20 dB• die-cast housing• connectors F type (center conductor diameter 0.5 ÷ 1.1 mm)J-2TAP/XX2 way 1 GHz taps158Technical specificationsT Y P E J-2TAP/8 J-2TAP/10 J-2TAP/12 J-2TAP/16 J-2TAP/20 J-2TAP/24Ordering number 00731 00729J 00732 00733 00734 00730Tap loss 8 ± 1.0 dB 10 ± 1.0 dB 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dB 24 ± 1.0 dBInsertion loss (IN-OUT) 5-40 MHz 3.5 dB 2.5 dB 1.6 dB 0.8 dB 0.8 dB 0.8 dB40-470 MHz 3.8 dB 2.8 dB 1.8 dB 0.8 dB 0.8 dB 0.8 dB470-1000 MHz 4.2 dB 3.2 dB 2.0 dB 1.5 dB 1.0 dB 1.0 dBIsolation (TAP-OUT) 5-40 MHz 33 dB 28 dB 30 dB 35 dB 45 dB 55 dB40-470 MHz 30 dB 26 dB 28 dB 33 dB 35 dB 42 dB470-1000 MHz 28 dB 23 dB 25 dB 28 dB 32 dB 40 dBIsolation (TAP-TAP) 5-40 MHz 38 dB 35 dB 30 dB 33 dB 35 dB 35 dB40-470 MHz 28 dB 32 dB 30 dB 32 dB 32 dB 32 dB470-1000 MHz 28 dB 25 dB 27 dB 30 dB 30 dB 30 dBReturn loss 5-40 MHz 22 dB 22 dB 22 dB 22 dB 22 dB 22 dB40-470 MHz 22 dB 21 dB 21 dB 21 dB 21 dB 21 dB470-1000 MHz 20 dB 20 dB 20 dB 20 dB 20 dB 20 dB

Cables and network accessoriesPassivesLow intermodulation distortion taps• die-cast housing• for use in two way CATV networks• connectors F type(center conductor diameter 0.5 ÷ 1.1 mm)J-1TAP(S)/XX1 way 1 GHz tapsTechnical specificationsT Y P E J-1TAP(S)/12 J-1TAP(S)/16 J-1TAP(S)/20 J-1TAP(S)/24Ordering number 00711S 00715S 00719S 00720STap loss 5-40 MHz 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dB 24 ± 1.0 dB470-1000 MHz 12 ± 1.5 dB 16 ± 1.5 dB 20 ± 1.5 dB 24 ± 1.5 dBInsertion loss 5-40 MHz 0.8 dB 0.8 dB 0.8 dB 0.8 dB40-470 MHz 0.8 dB 0.8 dB 0.8 dB 0.8 dB470-1000 MHz 1.0 dB 1.0 dB 1.0 dB 1.0 dBDirectional loss 5-40 MHz 30 dB 35 dB 40 dB 45 dB40-470 MHz 30 dB 32 dB 40 dB 42 dB470-1000 MHz 26 dB 28 dB 32 dB 40 dBReturn loss 5-40 MHz 20 dB 20 dB 20 dB 20 dB40-470 MHz 20 dB 22 dB 22 dB 22 dB470-1000 MHz 20 dB 20 dB 20 dB 20 dBSingle carrier level 5-30 MHz 120 dBµVHarmonic distortion 40-1000 MHz ≤10 dBµV• die-cast housing• for use in two way CATV networks• connectors F type(center conductor diameter 0.5 ÷ 1.1 mm)J-2TAP(S)/XX2 way 1 GHz tapsTechnical specificationsT Y P E J-2TAP(S)/12 J-2TAP(S)/16 J-2TAP(S)/20 J-2TAP(S)/24Ordering number 00732S 00733S 00734S 00730STap loss 5-40 MHz 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dB 24 ± 1.0 dB470-1000 MHz 12 ± 1.5 dB 16 ± 1.5 dB 20 ± 1.5 dB 24 ± 1.5 dBInsertion loss 5-40 MHz 1.6 dB 0.8 dB 0.8 dB 0.8 dB40-470 MHz 1.8 dB 0.8 dB 0.8 dB 0.8 dB470-1000 MHz 2.0 dB 1.5 dB 1.0 dB 1.0 dBDirectional loss 5-40 MHz 25 dB 30 dB 40 dB 50 dB40-470 MHz 28 dB 33 dB 35 dB 42 dB470-1000 MHz 25 dB 28 dB 32 dB 40 dBMutual isolation 5-40 MHz 25 dB 28 dB 28 dB 28 dB40-470 MHz 30 dB 32 dB 32 dB 32 dB470-1000 MHz 27 dB 30 dB 30 dB 30 dBReturn loss 5-40 MHz 20 dB 20 dB 20 dB 20 dB40-470 MHz 21 dB 21 dB 21 dB 21 dB470-1000 MHz 20 dB 20 dB 20 dB 20 dBSingle carrier level 5-30 MHz 120 dBµVHarmonic distortion 40-1000 MHz ≤10 dBµV159

Cables and network accessoriesPassivesLow intermodulation distortion taps• die-cast housing• for use in two way CATV networks• connectors F type(center conductor diameter 0.5 ÷ 1.1 mm)J-4TAP(S)/XX4 way 1 GHz tapsTechnical specificationsT Y P E J-4TAP(S)/12 J-4TAP(S)/16 J-4TAP(S)/20 J-4TAP(S)/24Ordering number 00778S 00779S 00780S 00781STap loss 5-40 MHz 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dB 24 ± 1.0 dB470-1000 MHz 12 ± 1.5 dB 16 ± 1.5 dB 20 ± 1.5 dB 24 ± 1.5 dBInsertion loss 5-40 MHz 3.2 dB 1.5 dB 0.8 dB 0.8 dB40-470 MHz 3.5 dB 2.0 dB 1.0 dB 0.8 dB470-1000 MHz 4.0 dB 2.5 dB 1.5 dB 1.0 dBDirectional loss 5-40 MHz 25 dB 30 dB 37 dB 45 dB40-470 MHz 25 dB 30 dB 33 dB 35 dB470-1000 MHz 23 dB 28 dB 28 dB 32 dBMutual isolation 5-40 MHz 25 dB 25 dB 25 dB 25 dB40-470 MHz 30 dB 30 dB 30 dB 30 dB470-1000 MHz 27 dB 28 dB 28 dB 28 dBReturn loss 5-40 MHz 20 dB 20 dB 20 dB 20 dB40-470 MHz 22 dB 22 dB 22 dB 22 dB470-1000 MHz 20 dB 20 dB 20 dB 20 dBSingle carrier level 5-30 MHz 120 dBµVHarmonic distortion 40-1000 MHz ≤10 dBµVTapsJ-4TAP/XX4 way 1 GHz taps160Technical specificationsT Y P E J-4TAP/12 J-4TAP/16 J-4TAP/20Ordering number 00778 00779 00780Tap loss 12 ± 1.0 dB 16 ± 1.0 dB 20 ± 1.0 dBInsertion loss (IN-OUT) 5-40 MHz 3.2 dB 1.5 dB 0.8 dB40-470 MHz 3.5 dB 2.0 dB 1.0 dB470-1000 MHz 4.0 dB 2.5 dB 1.5 dBDirectional loss 5-40 MHz 27 dB 35 dB 42 dB40-470 MHz 25 dB 30 dB 33 dB470-1000 MHz 23 dB 28 dB 28 dBIsolation (TAP-TAP) 5-40 MHz 30 dB 30 dB 30 dB40-470 MHz 30 dB 30 dB 30 dB470-1000 MHz 27 dB 28 dB 28 dBReturn loss 5-40 MHz 22 dB 22 dB 22 dB40-470 MHz 22 dB 22 dB 22 dB470-1000 MHz 20 dB 20 dB 20 dB

Cables and network accessoriesPassivesOutdoor splitters• splitters with 5/8” ports• waterproof die-cast aluminium housingJ-2OS2 way 1 GHz splitterJ-3OS3 way 1 GHz asymmetrical splitterTechnical specificationsT Y P E J-2OS J-3OSOrdering number 01805 01819Insertion loss 5-40 MHz 4.2 dB 4.0/7.5 dB40-470 MHz 4.5 dB 4.2/7.5 dB470-1000 MHz 5.5 dB 5.0/8.5 dBIsolation (TAP-OUT) 5-40 MHz 25 dB 25 dB40-1000 MHz 25 dB 23 dBReturn loss 5-40 MHz 22 dB 22 dB40-470 MHz 20 dB 20 dB470-1000 MHz 16 dB 16 dBCurrent pass/Hum modulation10 A/-66 dBOutdoor taps• taps with 5/8” ports• waterproof die-cast aluminium housingJ-DC/XX1 way 1 GHz tapsJ-DC2/XX2 way 1 GHz tapsTechnical specificationsT Y P E J-DC/8 J-DC/10 J-DC/12 J-DC/14 J-DC/16 J-DC2/10 J-DC2/12 J-DC2/14 J-DC2/16Ordering number 01814 01814E 01812 01822 01813 01823 01824 01825 01826Tap loss8 ± 1.0 dB 10 ± 1.0 dB 12 ± 1.0 dB 14 ± 1.0 dB 16 ± 1.0 dB 10 ± 1.2 dB 12 ± 1.2 dB 14 ± 1.2 dB 16 ± 1.2 dBInsertion loss 5-40 MHz 2.5 dB 2.0 dB 1.3 dB 1.3 dB 1.2 dB 3.0 dB 2.3 dB 1.5 dB 1.5 dB40-470 MHz 2.5 dB 2.2 dB 1.8 dB 1.8 dB 1.6 dB 3.5 dB 2.5 dB 2.0 dB 2.0 dB470-1000 MHz 4.0 dB 3.0 dB 2.5 dB 2.2 dB 2.2 dB 4.0 dB 3.0 dB 2.5 dB 2.5 dBIsolation (TAP-OUT) 5-40 MHz 25 dB 25 dB 30 dB 25 dB 26 dB 23 dB 25 dB 25 dB 30 dB40-1000 MHz 21 dB 23 dB 20 dB 25 dB 25 dB 23 dB 25 dB 25 dB 25 dBReturn loss 5-40 MHz - - - - - 30 dB 30 dB 30 dB 35 dB40-470 MHz - - - - - 25 dB 25 dB 25 dB 25 dB470-1000 MHz 16 dB 16 dB 16 dB 16 dB 16 dB 16 dB 16 dB 16 dB 16 dBCurrent pass/Hum modulation10 A/-66 dB161

Cables and network accessoriesPassivesOutdoor taps• taps with 5/8” ports in line and F connectors tap outputs• waterproof die-cast aluminium housingJ-2T/XX2 way 1 GHz tapsTechnical specificationsT Y P E J-2T/4 J-2T/8 J-2T/11 J-2T/14 J-2T/17 J-2T/20Ordering number 01820 01808 01816 01817 01818 01828Tap loss 4 ± 1.0 dB 8± 1.2 dB 11± 1.2 dB 14± 1.2 dB 17± 1.2 dB 20 ± 1.2 dBInsertion loss 5-40 MHz - 3.5 dB 1.8 dB 1.2 dB 1.2 dB 0.8 dB40-470 MHz - 4.5 dB 2.0 dB 1.4 dB 1.4 dB 1.2 dB470-1000 MHz - 5.2 dB 3.0 dB 2.5 dB 2.3 dB 2.0 dBIsolation (TAP-OUT) 5-40 MHz 24 dB 25 dB 30 dB 30 dB 30 dB 30 dB40-470 MHz 25 dB 25 dB 32 dB 32 dB 30 dB 28 dB470-1000 MHz 25 dB 23 dB 25 dB 25 dB 25 dB 25 dBReturn loss 5-40 MHz 22 dB 18 dB 18 dB 18 dB 18 dB 20 dB40-470 MHz 22 dB 20 dB 20 dB 20 dB 20 dB 20 dB470-1000 MHz 20 dB 17 dB 17 dB 17 dB 17 dB 17 dBCurrent pass through trunk line/Hum modulation6 A/-66 dB• taps with 5/8” ports in line and F connectors tap outputs• waterproof die-cast aluminium housingJ-4T/XX4 way 1 GHz taps162Technical specificationsT Y P E J-4T/8 J-4T/11 J-4T/14 J-4T/17 J-4T/20Ordering number 01803 01806 01810 01801 01802Tap loss 8 ± 1.2 dB 11 ± 1.5 dB 14 ± 1.2 dB 17 ± 1.2 dB 20 ± 1.2 dBInsertion loss 5-40 MHz - 3.5 dB 1.5 dB 1.0 dB 1.0 dB40-470 MHz - 4.2 dB 2.2 dB 1.2 dB 1.2 dB470-1000 MHz - 4.8 dB 3.2 dB 2.2 dB 2.0 dBIsolation (TAP-OUT) 5-40 MHz 30 dB 27 dB 27 dB 30 dB 30 dB40-470 MHz 30 dB 30 dB 30 dB 30 dB 30 dB470-1000 MHz 27 dB 25 dB 23 dB 23 dB 25 dBReturn loss 5-40 MHz 20 dB 16 dB 16 dB 17 dB 17 dB40-470 MHz 22 dB 20 dB 20 dB 20 dB 22 dB470-1000 MHz 16 dB 16 dB 18 dB 16 dB 18 dBCurrent pass through trunk line/Hum modulation6 A/-66 dB

Cables and network accessoriesConnectors and toolsConnectors and adapters for drop cables• F connector for cables RG6,RG59, screwedOrdering numberRG6 00920RG59 00927• link, F socket - F socketOrdering number 00921E• link, F plug - F socketOrdering number 00938E• link, IEC plug - F socketOrdering number 00922• F connector for cables RG6,RG59, crimpedOrdering numberRG6 10932RG59 10903ECrimping tool HT-106F• link, F plug-”quick” - F plug-”quick”Ordering number 00933• link, BNC plug - F socketOrdering number 00937N• High quality brass connectorfor cable RG6, crimpedOrdering number 10902Crimping tool CRP106H• link, F plug - F plugOrdering number 00929• 75 Ω terminator , F plugOrdering number 11926• DC isolated 75 Ω terminator, F plugOrdering number 00961• link, F plug - IEC socketOrdering number 00943A• F connector for cable RG11,crimped with pinOrdering number 10921Crimping tool HT-106F• 5/8" connector for cable RG11cable type, crimpedOrdering number 10923Crimping tool HT-106F• connector for cables RG6,RG59, IEC plug, crimpedOrdering numberRG6 00931ERG59 00932ECrimping tool HT-106F• link, F plug - F “quick”-socketOrdering number 00928• Lock terminator with 1/2W 75 Ω±5%Ordering number 00945• F connector for cables RG6,RG59, push-onOrdering numberRG6 01913RG59 01912• F connector for cable RG11,push-onOrdering number 01911Compression tool DL-8071R, CX3• attenuator, F plug - F socketOrdering number3 dB - 00967 10 dB - 009646 dB - 00968 12 dB - 009658 dB - 00969 16 dB - 00966L• Security tooling for lock terminatorOrdering number 00946Compression toolsHT-H510B, CX3163• adjustable attenuatorF socket, 0-20 dB, 0-1000 MHzOrdering number 00776S• power inserterF socket, 5-2400 MHzOrdering number 00797

Cables and network accessoriesConnectors and toolsConnectors for distribution cablesT Y P E Ordering number Description5/8M-C540TI 10933K 5/8” connector for cable QR540, Al5/8M-C610TI 10934C 5/8” connector for cable QR715, AlGRS-860-CH 10935C 5/8” connector for cable QR860, AlT Y P E Ordering number DescriptionGRS-540B-QR 01933 5/8” feed through connector for cable QR540, AlT Y P E Ordering number DescriptionGRS-540-SP 10938C Connector for cable QR540, AlGRS-715-SP 10939C Connector for cable QR715, AlGRS-860-SP 10930C Connector for cable QR860, Al164T Y P E Ordering number DescriptionGRS-540-AMF 10936C F connector for cable QR540, AlPD-715-AMF 10994 F connector for cable QR715, AlPD-860-AMF 10998 F connector for cable QR860, AlT Y P E Ordering number DescriptionFM-5/8F 10955C link, F plug - 5/8” socket, Al

Cables and network accessoriesConnectors and toolsAdaptersT Y P E Ordering number DescriptionPG11M-5/8F 10965E link, PG11 plug - 5/8” socket, brass5/8M-PG11F 10963 link, 5/8” plug - PG11 socket, brass5/8F-5/8F 10940D link, 5/8” socket- 5/8” socket, AlT Y P E Ordering number Description5/8M-FF 10959 link, 5/8” plug - F socket, brassCoring/strip tools for QR cablesSecurity shield tool• CST 540-QRT for coring QR-540 cableOrdering number 10941• CST 715-QRT for coring QR-715 cableOrdering number 10942• CST 860-QRT for coring QR-860 cableOrdering number 10943• S-200 for use 7/16 inch hex shielded F connectorsOrdering number 01937Cable stripper Cable stripper Crimping tools• HT332 cable stripper rotary RG6/RG59Ordering number 10945E• HT302S cable stripper RG11Ordering number 01904• crimping instrument HT-106Ffor hex. 8.22 mm & 12.06 mm & 2.54 mmOrdering number 10947E• crimping instrument CRP106Hfor hex. 8.22 mm & 9.14 mmOrdering number 10946165Compression toolCompression toolCrimping tool• CX3 compression tool of all size F,BNC & IEC for RG6/7/11/59 cablesOrdering number 10920• HT-H510B compression tool for push-onconnectors for RG59/RG6 cablesOrdering number 01910• DL-8071R crimping instrument for waterproofconnectors for F series RG-9 (6C), RG-11 (7C) cablesOrdering number 10962

Cables and network accessoriesAccessoriesTV outlet socketsTR01 COV01 TR02-SAT COV02-SAT FRM01*Frequency range 5 MHz 120 MHz 862 MHz 2050 MHzTR01ordering number00791TR01-10ordering number00792Throughloss,dBThroughloss,dBR 7.0TV 3.0R 13TV 11IN-OUT 3.0TR02-SATordering number00790Throughloss,dBR 7.0TV 3.0SAT-IN DC pass 500 mA max.TR02-10SATordering number00788Throughloss,dBSAT 2.0R 16TV 13SAT 13IN-OUT DC pass 500 mA max.* ordering number 00785IN-OUT 3.0Installation boxes• white painted metal boxes with lock and mounting panel166Installation box 300x400x140 mmordering number 00993Installation box 400x400x150 mmordering number 00991Installation box 150x150x60 mmordering number 00996Installation box 250x300x120 mmordering number 00992Installation box 250x150x100 mmordering number 00997Installation box 250x300x100 mmordering number 00998Installation box 300x400x140 mmordering number 00988Installation box 400x400x150 mmordering number 00987Installation box 250x300x120 mmordering number 00989

AppendixVHF TV channels allocationTV standardsChannel Video bandwidth Video/audio Vestigial Video AudioStandard No. of lines width separation sideband modulation modulationMHz MHz MHz MHzB (CCIR) 625 7 5 +5.5, (+5.742) 1) 0.75 negative FM, FM 1)D (OIRT) 625 8 6 +6.5 0.75 negative FMG (CCIR) 625 8 5 +5.5, (+5.742) 1) 0.75 negative FM, FM 1)H (B) 625 8 5 +5.5 1.25 negative FMI (GB) 625 8 5.5 +6 1.25 negative FMK (OIRT) 625 8 6 +6.5 0.75 negative FMK1 (F) 625 8 6 +6.5 1.25 negative FML (F) 625 8 6 +6.5 1.25 positive AMM (FCC) 525 6 4.2 +4.5 0.75 negative FMN (South America) 625 6 4.2 +4.5 0.75 negative FM1)second audio carrier for dual or stereo operation168Standard L / FranceTV band Channel Frequency Video carrier Audio carrierMHz MHz MHzI L 02 49-57.00 55.75 49.25L 03 53.75-61.75 60.50 54.00L 04 57.00-65.00 63.75 57.25III L 05 174.75-182.75 176.00 182.50L 06 182.75-190.75 184.00 190.50L 07 190.75-198.75 192.00 198.50L 08 198.75-206.75 200.00 206.50L 09 206.75-214.75 208.00 214.50L 10 214.75-222.75 216.00 222.50Inter- B 115.5-123.5 116.75 123.25bande C 127.5-135.5 128.75 135.25D 139.5-147.5 140.75 147.25E 151.5-159.5 152.75 159.25F 163.5-171.5 164.75 171.25G 175.5-183.5 176.75 183.25H 187.5-195.5 188.75 195.25I 199.5-207.5 200.75 207.25J 211.5-219.5 212.75 219.25K 223.5-231.5 224.75 231.25L 235.5-243.5 236.75 243.25M 247.5-255.5 248.75 255.25N 259.5-267.5 260.75 267.25O 271.5-279.5 272.75 279.25P 283.5-291.5 284.75 291.25Q 295.5-303.5 296.75 303.25Standard I / South AfricaTV band Channel Frequency Video carrier Audio carrierMHz MHz MHzIII 4 174-182 175.25 181.255 182-190 183.25 189.256 190-198 191.25 197.257 198-206 199.25 205.258 206-214 207.25 213.259 214-222 215.25 221.2510 222-230 223.25 229.2511 230-238 231.25 237.2513 246-254 247.25 253.25Standard A / Great BritainTV band Channel Frequency Video carrier Audio carrierMHz MHz MHzI B1 41.25-46.25 45.00 41.50B2 48-53 51.75 48.25B3 53-58 56.75 53.25B4 58-63 61.75 58.25B5 63-68 66.75 63.25III B6 176-181 179.75 176.25Standard B / ItalyB7 181-186 184.75 181.25B8 186-191 189.75 186.25B9 191-196 194.75 191.25B10 196-201 199.75 196.25B11 201-206 204.75 201.25B12 206-211 209.75 206.25B13 211-216 214.75 211.25B14 216-221 219.75 216.25TV band Channel Frequency Video carrier Audio carrierMHz MHz MHzI A 52.5-56.5 53.75 59.25B 61-68 62.25 67.75II C 81-88 82.25 87.75III D 174-181 175.25 180.75E 182.5-189.5 183.75 189.25F 191-198 192.25 197.75G 200-207 201.25 206.75H 209-216 210.25 215.75H 1 216-223 217.25 222.75H 2 223-230 224.25 229.75

AppendixVHF TV channels allocationStandard B / CCIRTV band Channel Frequency Video carrier Audio carrierMHz MHz MHzI E2 47-54 48.25 53.75E3 54-61 55.25 60.75E4 61-68 62.25 67.75S1 S3 118-125 119.25 124.75S4 125-132 126.25 131.75S5 132-139 133.25 138.75S6 139-146 140.25 145.75S7 146-153 147.25 152.75S8 153-160 154.25 159.75S9 160-167 161.25 166.75S10 167-174 168.25 173.75III E5 174-181 175.25 180.75E6 181-188 182.25 187.75E7 188-195 189.25 194.75E8 195-202 196.25 201.75E9 202-209 203.25 208.75E10 209-216 210.25 215.75E11 216-223 217.25 222.75E12 223-230 224.25 229.75S2 S11 230-237 231.25 236.75S12 237-244 238.25 243.75S13 244-251 245.25 250.75S14 251-258 252.25 257.75S15 258-265 259.25 264.75S16 265-272 266.25 271.75S17 272-279 273.25 278.75S18 279-286 280.25 285.75S19 286-293 287.25 292.75S20 293-300 294.25 299.75S3 S21 302-310 303.25 308.75S22 310-318 311.25 316.75S23 318-326 319.25 324.75S24 326-334 327.25 332.75S25 334-342 335.25 340.75S26 342-350 343.25 348.75S27 350-358 351.25 356.75S28 358-366 359.25 364.75S29 366-374 367.25 372.75S30 374-382 375.25 380.75S31 382-390 383.25 388.75S32 390-398 391.25 396.75S33 398-406 399.25 404.75S34 406-414 407.25 412.75S35 414-422 415.25 420.75S36 422-430 423.25 428.75S37 430-438 431.25 436.75S38 438-446 439.25 444.75Standard D / OIRTTV band Channel Frequency Video carrier Audio carrierMHz MHz MHzI 1 48.5-56.5 49.75 56.252 58-66 59.25 65.75II 3 76-84 77.25 83.754 84-92 85.25 91.755 92-100 93.25 99.75SR1 SR1 110-118 111.25 117.75SR2 118-126 119.25 125.75SR3 126-134 127.25 133.75SR4 134-142 135.25 141.75SR5 142-150 143.25 149.75SR6 150-158 151.25 157.75SR7 158-166 159.25 165.75SR8 166-174 167.25 173.75III 6 174-182 175.25 181.757 182-190 183.25 189.758 190-198 191.25 197.759 198-206 199.25 205.7510 206-214 207.25 213.7511 214-222 215.25 221.7512 222-230 223.25 229.75SR2 SR11 230-238 231.25 237.75SR12 238-246 239.25 245.75SR13 246-254 247.25 253.75SR14 254-262 255.25 261.75SR15 262-270 263.25 269.75SR16 270-278 271.25 277.75SR17 278-286 279.25 285.75SR18 286-294 287.25 293.75SR3 S19 294-302 295.25 301.75S20 302-310 303.25 309.75S21 310-318 311.25 317.75S22 318-326 319.25 325.75S23 326-334 327.25 333.75S24 334-342 335.25 341.75S25 342-350 343.25 349.75S26 350-358 351.25 357.75S27 358-366 359.25 365.75S28 366-374 367.25 373.75S29 374-382 375.25 381.75S30 382-390 383.25 389.75S31 390-398 391.25 397.75S32 398-406 399.25 405.75S33 406-414 407.25 413.75S34 414-422 415.25 421.75S35 422-430 423.25 429.75S36 430-438 431.25 437.75S37 438-446 439.25 445.75S38 446-454 447.25 453.75S39 454-462 455.25 461.75S40 462-470 463.25 469.75169

AppendixUHF TV channels allocationStandard K / OIRT, G / CCIR, I, L, HTV band Channel Frequency Video carrier Audio carrier Audio carrier Audio carrierMHz MHz MHz MHz MHzStandard G, H Standard I Standard K, LIV 21 470-478 471.25 476.75 477.25 477.7522 478-486 479.25 484.75 485.25 485.7523 486-494 487.25 492.75 493.25 493.7524 494-502 495.25 500.75 501.25 501.7525 502-510 503.25 508.75 509.25 509.7526 510-518 511.25 516.75 517.25 517.7527 518-526 519.25 524.75 525.25 525.7528 526-534 527.25 532.75 533.25 533.7529 534-542 535.25 540.75 541.25 541.7530 542-550 543.25 548.75 549.25 549.7531 550-558 551.25 556.75 557.25 557.7532 558-566 559.25 564.75 565.25 565.7533 566-574 567.25 572.75 573.25 573.7534 574-582 575.25 580.75 581.25 581.7535 582-590 583.25 588.75 589.25 589.7536 590-598 591.25 596.75 597.25 597.7537 598-606 599.25 604.75 605.25 605.75V 38 606-614 607.25 612.75 613.25 613.7539 614-622 615.25 620.75 621.25 621.7540 622-630 623.25 628.75 629.25 629.7541 630-638 631.25 636.75 637.25 637.7542 638-646 639.25 644.75 645.25 645.7543 646-654 647.25 652.75 653.25 653.7544 654-662 655.25 660.75 661.25 661.7545 662-670 663.25 668.75 669.25 669.7546 670-678 671.25 676.75 677.25 677.7547 678-686 679.25 684.75 685.25 685.7548 686-694 687.25 692.75 693.25 693.7549 694-702 695.25 700.75 701.25 701.7550 702-710 703.25 708.75 709.25 709.7551 710-718 711.25 716.75 717.25 717.7552 718-726 719.25 724.75 725.25 725.7553 726-734 727.25 732.75 733.25 733.7554 734-742 735.25 740.75 741.25 741.7555 742-750 743.25 748.75 749.25 749.7556 750-758 751.25 756.75 757.25 757.7557 758-766 759.25 764.75 765.25 765.7558 766-774 767.25 772.75 773.25 773.7559 774-782 775.25 780.75 781.25 781.7560 782-790 783.25 788.75 789.25 789.7561 790-798 791.25 796.75 797.25 797.7562 798-806 799.25 804.75 805.25 805.7563 806-814 807.25 812.75 813.25 813.7564 814-822 815.25 820.75 821.25 821.7565 822-830 823.25 828.75 829.25 829.7566 830-838 831.25 836.75 837.25 837.7567 838-846 839.25 844.75 845.25 845.7568 846-854 847.25 852.75 853.25 853.7569 854-862 855.25 860.75 861.25 861.75170

AppendixConversion tableµV 75 Ω dBµV dBm1 0 -1091.5 3.5 -105.52 6 -1032.5 8.0 -1013 9.5 -99.53.5 11 -984 12 -974.5 13 -965 14 -956 15.5 -93.57 17 -928 18 -919 19 -9010 20 -8915 23.5 -85.520 26 -8325 28 -8130 29.5 -79.535 31 -7840 32 -7745 33 -7650 34 -7560 35.5 -73.570 37 -7280 38 -7190 39 -70100 40 -69150 43.5 -66.5200 46 -63250 48 -61300 49.5 -59.5350 51 -58400 52 -57450 53 -56500 54 -55600 55.5 -53.5700 57 -52800 58 -51900 59 -50mV 75 Ω dBµV dBm1 60 -491.5 63.5 -45.52 66 -432.5 68 -413 69.5 -39.53.5 71 -384 72 -374.5 73 -365 74 -356 75.5 -33.57 77 -328 78 -319 79 -3010 80 -2915 83.5 -25.520 86 -2325 88 -2130 89.5 -19.535 91 -1840 92 -1745 93 -1650 94 -1560 95.5 -13.570 97 -1280 98 -1190 99 -10100 100 -9150 103.5 -5.5200 106 -3250 108 -1300 109.5 +0.5350 111 +2400 112 +3450 113 +4500 114 +5600 115.5 +6.5700 117 +8800 118 +9900 119 +101.000 120 +11V 75 Ω dBµV dBm1 120 +111.5 123.5 +14.52 126 +172.5 128 +193 129.5 +20.53.5 131 +224 132 +234.5 133 +245 134 +256 135.5 +26.57 137 +288 138 +299 139 +3010 140 +31Signal-to-noise ratioIn relation to the TV channel bandwidth the noise level of a 75 Ω resistance is 2 dBµV. The signal-to-noise ratio is the difference between level of the usefulsignal and noise level. The noise figure indicates by how many dB an amplifier additionally reduces the signal-to-noise ratio.Signal-to-noise ratio = amplifier input signal level-noise figure-2 dBµVe.g. antenna level = 50 dBµV, noise figure = 4 dB, signal-to-noise ratio = 50 dBµV-4 dB-2 dBµV = 44 dBSignal-to-noise ratio > 46 dB 37 dB 30 dB < 26 dBNoise noise free visible, not disturbing visibly disturbed noise predominatingVision quality very good good bad uselessBroadband amplifiers output level reduction:by increasing number of channelsMaximal output level (IMD3=60 dB, DIN 45004B) is stated for two TV channels distribution. If there are more than two TV channels distributed by broadbandamplifiers, maximal output level have to be reduced according to the following table.Number of channels 2 3 4 5 6 7 8 9 10 11 12 16Level reduction, dB (Rc) 0 2 3.5 4.5 5 5.5 6 6.5 7 7.5 8 9by cascading amplifiersReduction of output level for broadband amplifiers according to the number of cascade amplifiers in the system.Number of amplifiers - 2 3 4 5 6 7Level reduction, dB (RA) 0 3 4.8 6 7 7.8 8.5The output level of the amplifiers must be reduced according to the table above to keep the intermodulation products at the same type.No = Ns - Rc - RANo = Maximal operating levelNs = Output level (IMD3=60 dB, DIN45004B)Rc = Reduction by number of channelsRA = Reduction by number of amplifiersScreening factorFrom 1996 onward the values according to CELENEC will possibly apply maximum radiation of interference signals: 30-1000 MHz - 20 dBpW; 1000-2500MHz - 43 dBpW.Minimum values for the screening factor according to EN 50083-2:MHz Cable Components30-470 ≥ 75 dB ≥ 75 dB470-1000 ≥ 75 dB ≥ 65 dB1000-1750 ≥ 65 dB ≥ 55 dB171