DVRSC 45Lighting – HeadlampD. BILLET HEADLAMP SHELLAdd style and substance to the front fork with this bulletshapedHeadlamp Shell. Manufactured from billet aluminum,this extended headlamp housing recesses the headlamp for atrue custom appearance. The mirror-finish chrome surfacesand the close-fitting inner trim ring create the appearance of aone-piece design. Kit includes chrome-plated mounting hardwareand a custom billet mount.67704-03Fits ’00-later FXST, FXSTB, FXSTC and FXSTD models,’99-’05 FXDWG models and ’02-later VRSC models (exceptVRSCF) equipped with Installation Bracket P/N 68211-05.(Does not fit International models.)D. BILLET HEADLAMP SHELL (SHOWN WITH INSTALLATION BRACKET ANDTURN SIGNAL RELOCATION KIT)EFShown with:BILLET HEADLAMP INSTALLATION BRACKETFOR VRSC MODELSAdd to the long and lean look of the VRSC model family. Thisbracket allows you to replace the Original Equipment headlampwith the mirror-chrome extended Billet Headlamp Shell.68211-05Fits ’02-later VRSCA, VRSCAW, VRSCB, VRSCD and VRSCXmodels. Requires separate purchase of Billet Headlamp ShellKit P/N 67704-03 and Headlamp Bulb P/N 68297-05. VRSCDmodels require removal of Original Equipment Color-Matched Speed Screen Visor.E. CONTOURED HEADLAMP TRIM VISORDraped around the curving profile of the distinctive slopingV-Rod ® headlamp, this mirror-finish visor blends with theheadlamp mounting bracket for a true custom look. Designedto direct light away from the leading edge of the windshield,this styled visor looks great with or without a windshield.69236-04Fits ’02-later VRSCA, VRSCAW, VRSCX, VRSCR and ’04VRSCB models.F. HEADLAMP VISORDirect the light away from the leading edge of the windshieldwith this simple-to-install Headlamp Visor. Standard equipmentwith most VRSCA model windshield kits, this chromeplatedvisor mounts between the headlamp shell and theheadlamp bracket with Original Equipment hardware.69200-01Fits ’02-later VRSCA, VRSCAW, VRSCX, VRSCR and ’04VRSCB models.E. CONTOURED HEADLAMP TRIM VISORF. HEADLAMP VISORG. TURN SIGNAL RELOCATION KITStyled to blend with the lower triple clamp. This chrome-platedTurn Signal Relocation Kit moves the Original Equipmentbullet-style turn signals from the handlebar to the front forkfor a clean, streamlined look. Kit includes left and right mountingstalk and all required hardware.57205-05Fits ’02-later VRSCA, VRSCB, VRSCD and ’07-later VRSCXand VRSCDX models.GG. TURN SIGNAL RELOCATION KIT
46 VRSC Lighting – Turn Signals & Tail LampsA. MINI-BULLET LED TURN SIGNAL KITTake a new direction in lighting. Bright, fast-acting LED turnsignal elements are housed in a mirror chrome-plated or satinblack mini-bullet housing for definitive style. The compact turnsignals tuck in tight to the hand controls and the small sizetrims the rear profile for a custom look. Available with clear,smoked or amber lenses, kit includes front and rear signalsand the required controller. Vehicle-specific mounting kit soldseparately.NOTE: These signals were designed to meet European lightingrequirements and are ECE approved. As part of theECE requirements, the front turn signals do not operate asrunning lamps; they only operate as directional lamps. Theseturn signals do not conform to DOT requirements for NorthAmerica because the lens diameter is too small. The turnsignal diameter is 45mm (1-3/4").Fits ’02-later VRSC (except VRSCF), ’08-later XR, ’04-laterXL (except XL883N, XL1200N and XL1200X), ’02-later Dyna ® ,(except ’09-later FXDWG and FXDB), ’00-’07 FXSTD, ’02-laterFXST, FXSTB, FXSTC, FXSTS, FLSTF, FLSTS, FLSTSB andFLSTSC models. Installation requires separate purchase ofappropriate Mounting Kit. Intended for use on HDI modelsonly.69474-07 †† Chrome Housing, Amber Lenses.69475-07 †† Chrome Housing, Smoked Lenses.69476-07 †† Chrome Housing, Clear Lenses.Fits ’02-later VRSC models (except VRSCF) and ’08-later XRmodels. Installation requires separate purchase of appropriateMounting Kit. Intended for use on HDI models only.68863-08 Black Housing, Smoked Lens.Also available:MOUNTING KIT FOR MINI-BULLET LEDTURN SIGNALSKit includes the wiring harness, mounting brackets, andhardware required to install Mini-Bullet Turn Signals on aspecified model.69593-08A Chrome.Required for installation of Mini-Bullet LED Turn Signal KitsP/N 69474-07, 69475-07 or 69476-07 on ’02-later VRSCmodels.B. CHROME BULLET REAR TURN SIGNALKIT FOR VRSC MODELSReplace the Original Equipment rear flat black bullet turnsignal housings with brilliant chrome. Kit includes chromeplatedbullet-style turn signal housings, chrome rear supports,and amber-colored lenses.69374-05AFits ’02-later Domestic VRSCA, VRSCB, VRSCD and ’07VRSCX models.C. AUXILIARY RUNNING LIGHT/BRAKE LIGHT/TURNSIGNAL CONVERSION KITTurn signal module adds an auxiliary brake light and runninglight function to your existing turn signals for auxiliary rearlighting. Red lenses glow when the headlamp is on, andincrease in intensity when brakes or turn signals are activated.Easy-to-install, the kit simply plugs into your existingwiring harness. Red turn signal lenses are included. MeetsDOT requirements.69464-06 Bullet Lens Style.Fits ’02-’06 VRSC models equipped with stock bullet turnsignals.69580-07 Bullet Lens Style.Fits ’07-later VRSC models (except VRSCF) equipped withstock bullet turn signals.D. CUSTOM LED TAIL LAMPFunction and style in one. 23 brilliant red LED lamps are setin a mirror-finished chrome inner reflector. The “diamond cut”facets shape and direct the light, and add a style all their own.Available with a red or clear outer lens, the installed lens addsa red metallic or chrome finishing touch to the rear fender.Easy plug-in connection to the Original Equipment wiringharness. Meets DOT and TUV requirements.Fits ’02-later VRSC models (except VRSCF) and ’00-’07FXSTD models.69367-07 Clear Lens with Chrome Reflector.69366-07 Red Lens with Chrome Reflector.ABA. MINI-BULLET LED TURN SIGNAL KIT –CHROME HOUSING (AMBER LENS)B. CHROME BULLET REAR TURN SIGNAL KITFOR VRSC MODELSDACA. MINI-BULLET LED TURN SIGNAL KIT –BLACK HOUSING (SMOKED LENS)C. AUXILIARY RUNNING LIGHT/BRAKE LIGHT/TURN SIGNAL CONVERSION KITD††D. CUSTOM LED TAIL LAMP – CLEAR LENSD. CUSTOM LED TAIL LAMP – RED LENS