FEIN SUPERCUT CONSTRUCTION - Ambitex

Genuine FEIN accessories for FEIN MULTIMASTERM-CUT Saw BladeFor making cut-outs in fibreglass,CFRP, wood and sheet metal, withan edge length of 10 mm or more,max. cutting depth: approx. 28 mm(fibreglass, wood), in sheet metalapprox. 1 mm, length 50 mmMINICUT saw bladeFor wood and other soft materials,plunge depth 30 mm, pack of 2.Carbide rasp, finger-shapedFor rough sanding of filler, tileadhesives, concrete, stone and wood.The finger shape, coated on both sides,is especially well suited for artisticwork.Diamond-coated saw bladeFor cutting through marble andconcrete trass joints. Little dust iscreated, long service life.Cutting width approx. 2,2 mm.WidthNo. in packWidth No. in packmm pcs Part number10 2 6 35 02 159 01 0For making cut-outs in fibreglass,CFRP, wood and sheet metal, withan edge length of 30 mm or more,max. cutting depth: 45 mm (fibreglass,wood), in sheet metal approx. 1 mm,length 50 mmmm pcs Part number10 2 6 35 02 132 01 320 2 6 35 02 131 01 0MINICUT HSS saw bladeFor non-ferrous metals and plastics,plunge depth 20 mm, pack of 2.Part number 6 37 31 002 01 7Remove groutsCarbide segment saw bladeFor cutting out damaged tile joints andfor cutting grooves in plaster, porousconcrete and similar constructionmaterials.Cutting width approx. 1,2 mm.Ø No. in packmm pcs Part number63 1 6 35 02 105 01 263 5 6 35 02 105 02 0Diamond-coated segmentsaw bladeFor cutting out damaged tile joints andfor cutting grooves in plaster, porousconcrete and similar constructionmaterials. Long service life.Cutting width approx. 2,2 mm.WidthNo. in packmm pcs Part number10 2 6 35 02 130 01 120 2 6 35 02 129 01 9Width No. in packmm pcs Part number30 2 6 35 02 157 01 0Carbide fileFor deburring and filing cut-outs infibreglass, CFRP, plastics and wood,length 50 mmDiamond fileFor sharpening blades and cutters.Ø No. in packmm pcs Part number90 1 6 35 02 170 01 090 5 6 35 02 170 02 0Cutting width approx. 2,2 mm.Ø No. in packmm pcs Part number63 1 6 35 02 114 01 763 5 6 35 02 114 02 090 1 6 35 02 166 01 090 5 6 35 02 166 02 0Width No. in packmm pcs Part number10 2 6 37 06 017 01 0saw and file set FMMSawing and filing set for makingrecesses in fibreglass, CFRP, wood andsheet metal. M-CUT saw blade, 10 mmand 30 mm, carbide file, 10 mmGrain Widthmm Part numberextra fine 10 6 37 06 014 02 6Fein 20 6 37 06 013 02 8Normal 20 6 37 06 012 02 4Carbide fileFor filing out cut-outs as well as fordeburring. Fits on MINICUT and file set.Ø No. in packmm pcs Part number63 1 6 35 02 118 01 690 1 6 35 02 169 01 090 5 6 35 02 169 02 0Cutting width approx. 4 mm.Ø No. in packmm pcs Part number90 1 6 35 02 171 01 090 5 6 35 02 171 02 0Cleaning blockRhombus for cleaning the carbide toolsand diamond-coated tools.Part number 6 37 19 007 01 0Part number 6 35 02 157 02 0MINICUT and File setFor cuts as of 10 mm. 2 saw bladesfor wood and soft plastics, 2 HSS sawblades for hard plastics, fibreglass andsheet metal up to 1 mm, 1 diamondfile, 1 carbide file.Part number 6 37 06 015 01 0RaspingCarbide rasp, triangularFor rough sanding of filler, tileadhesives, concrete, stone and wood.For use with or without dust extractor.Standard version,edge length of 80 mm.Carbide saw bladeFor reworking deck joints.Also suited to cutting out tile joints.Cutting width approx. 1.3 mm.ØmmPart number63 6 35 02 125 01 0Part number 6 37 31 001 01 4Part number 6 39 01 025 06 0234