Download Brochure - Methods Machine Tools

Med CellROBODRILL• High Speed 30 Taper 5-AxisMachining and RoboticAutomation Package• On-Site Robot Training IncludedLR Mate 200i• 6-Axis Robot with 6.61 lb.Payload Capacity• Double Gripper End of ArmToolingMed Cell• Tsudakoma RTT-111,AA4 th and 5 th Axis Rotary Table• 70mm x 70mm x 12.5mmAutomatic Pallet System• Inbound and OutboundConveyors with Auto Door5-Axis Medical AutomationIntegrated Palletized Workholding!65 UNION AVENUE, SUDBURY, MA 01776 • 877-668-4262 • WWW.METHODSMACHINE.COMMACHINE TOOLS • TURNKEY INSTALLATIONS • AUTOMATION CELLS • TOOLING • TECHNICAL CENTERS FROM COAST TO COASTARIZONA602-437-2220CALIFORNIA714-521-2507ILLINOIS847-783-6800MICHIGAN248-624-8601NORTH CAROLINA704-587-0507

DimensionsPart Conveyors withQuick Setup TracksMed Cell with Standard Bed RoboDrillAll dimensions in inches. Specifications and dimensions subject to change without notice.Inverted Robot withDouble GripperTeaching PendantSafety Guardingand InterlocksStandard FeaturesFANUC RoboDrill VMC• FANUC RoboDrill (Any model)• Horsepower: Up To 16.5 @ 1,700 RPM• Spindle speed: 10,000 RPM (24,000 RPM optional)• Toolchanger: 21 tools• Torque: Up To 56 ft.lb (.750 tap in 303 SS)• X Axis travels: 300 mm, 400 mm, or 700 mm• Y Axis travels: 300 mm or 400 mm• Tool change time: .9 seconds tool to tool• Rigid tapping: Up To 5,000 RPM (8,000 RPM optional)• Accelerations (X, Y, Z): 1.5 G• Rapid traverses: 2,125 IPM• Feed rates: 1,181 IPM (2,362 IPM optional)• Coolant-thru-spindle ready• High-speed reverse tapping• Thread milling• Basic top cover• Memory: 512 K• 1,000 registerable programs• Tool comp C (length and diameter)• 54 work offsets• Custom macro B• Thermal compensationFANUC LR Mate 200i Robot• Axes: 6• Payload (at wrist): 6.61 pounds• End-of-arm tooling: Double gripper• Weight: 86 pounds• Teaching pendant: Color graphics• Standard load/unload programming sequences• Standard robot workcell documentation• On-site robot training(operation and maintenance)Med Cell• Robot interface and robot side auto door• Robot safety guarding with safety interlock• Inbound conveyor: 12" x 60"• Outbound conveyor: 12" x 72"• 1 Pneumatic double-acting valve• Chip management system: Flush and air blow(does not include chip conveyor)• 2 Positive pressure nozzles for part blow-off• Tsudakoma RTT-111-CA 4 th and 5 th axis rotary table• 70mm x 70mm x 12.5mm automatic pallet system• Triple alarm lightCompact Integrated DropTrunnion Rotary Tablew/Palletized WorkholdingPower Requirements• RoboDrill power: 15 KVA• RoboDrill compressed air: 80 PSI• Med Cell power: 110 VAC / 15 A• Med Cell compressed air: 90 PSI65 Union Ave., Sudbury, MA 01776877-668-4262 • Fax: 978-443-7466sales@methodsmachine.comwww.methodsmachine.com©Methods Machine Tools, Inc. • Methods-Fanuc Robodrill Med Cell 040213