Fabri-Valve® Push Through Slurry Valve SV1 - Errand Enterprises
Fabri-Valve® Push Through Slurry Valve SV1 - Errand Enterprises
Fabri-Valve® Push Through Slurry Valve SV1 - Errand Enterprises
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Fabri</strong>-<strong>Valve</strong> ® <strong>SV1</strong>Design■ Bi-directional shut-off with zero downstream leakage.■ Rubber lined port with no metallic components in themedia flow path.■ No chest cavity for solids to build-up and bind thegate.■ Heavy duty self-supporting yoke. (Standard withdouble acting air cylinder and manually actuatedvalves.)■ Standard yokes accept manual, pneumatic, hydraulic,or electric actuation for easy conversion in the field.■ Lockouts in the open and closed position (standard).■ Rod boots (standard) protect the actuation in harshenvironments.■ Media does not contact the gate in the fully openposition.■ Integrated load distribution rings ensure proper seatsupport independent of the type of mating flange.■ Load distribution rings (polymer encapsulated)eliminate the need for gaskets.SpecificationsSize Range3” – 24” (DN80 – DN600)Pressure Rating150 CWP (10.3 Bar) Sizes 3” – 24” (DN80 - DN600)Temperature Rating170°F (77°C)Flange DrillingASME/ANSI 125/150Contact factory for alternate flange drillingTestingEvery <strong>Fabri</strong>-<strong>Valve</strong> <strong>SV1</strong> is fully tested prior to shipment.Testing includes a seat test and shell test, plus a cyclingtest, to insure proper functioning of moving parts.Additional testing is also available. Please let us knowyour requirements.Shell test: The valve assembly is hydro tested at 15psig (1 bar) and 1.5 times the rated CWP (Cold WorkingPressure) with the valve ends sealed and the valve gatein the fully open position. Visually detectable leakagethrough pressure boundary walls is not allowed.Dual resilient seat test: The valve assembly is hydrotested at 15 psig (1 bar) and the valve assembly’s ratedCWP on each side of the fully closed valve. Visuallydetectable leakage across the seat is not allowed.-3-
<strong>Fabri</strong>-<strong>Valve</strong> ® <strong>SV1</strong> - <strong>Push</strong> <strong>Through</strong> <strong>Slurry</strong> <strong>Valve</strong>Dimensions Inches (mm) <strong>SV1</strong> w/Handwheel or Pneumatic Cylinder<strong>Valve</strong> SizeIN DN A C DHW 5 CYL 6 CYL HW 5 CYL 6 CYL 5 CYL 6 CYL3 80 24.81 24.50 24.75 16.00 5.50 6.50 3/8"-18 3/8"-18(630) (622) (629) (406) (140) (165)HW 5 CYL 6 CYL HW 5 CYL 6 CYL 5 CYL 6 CYL4 100 27.56 27.25 27.50 16.00 5.50 6.50 3/8"-18 3/8"-18(700) (692) (699) (406) (140) (165)HW 6 CYL 8 CYL HW 6 CYL 8 CYL 6 CYL 8 CYL6 150 33.94 33.88 34.25 16.00 6.50 9.00 3/8"-18 3/8"-18(862) (860) (870) (406) (165) (229)HW 8 CYL 10 CYL HW 8 CYL 10 CYL 8 CYL 10 CYL8 200 42.44 42.25 43.25 20.00 9.00 11.00 3/8"-18 1/2"-14(1078) (1073) (1099) (508) (229) (279)HW 8 CYL 10 CYL 12 CYL HW 8 CYL 10 CYL 12 CYL 8 CYL 10 CYL 12 CYL10 250 50.94 50.75 51.75 51.75 20.00 9.00 11.00 12.75 3/8"-18 1/2"-14 1/2"-14(1294) (1289) (1314) (1314) (508) (229) (279) (324)HW 8 CYL 10 CYL 12 CYL HW 8 CYL 10 CYL 12 CYL 8 CYL 10 CYL 12 CYL12 300 †† 57.63 58.63 58.63 †† 9.00 11.00 12.75 3/8"-18 1/2"-14 1/2"-14(1464) (1489) (1489) (229) (279) (324)HW 10 CYL 12 CYL 14 CYL HW 10 CYL 12 CYL 14 CYL 10 CYL 12 CYL 14 CYL14 350 †† 64.13 64.13 65.00 †† 11.00 12.75 14.75 1/2"-14 1/2"-14 3/4""-14(1629) (1629) (1651) (279) (324) (375)HW 10 CYL 12 CYL 14 CYL 16 CYL HW 10 CYL 12 CYL 14 CYL 16 CYL 12 CYL 14 CYL 14 CYL 16 CYL16 400 †† 70.19 70.19 71.06 71.38 †† 11.00 12.75 14.75 17.00 1/2"-14 3/4"-14 3/4"-14 3/4"-14(1783) (1783) (1805) (1813) (279) (324) (375) (432)HW 10 CYL 12 CYL 14 CYL 16 CYL HW 10 CYL 12 CYL 14 CYL 16 CYL 12 CYL 14 CYL 14 CYL 16 CYL18 450 †† 74.56 74.56 75.44 75.75 †† 11.00 12.75 14.75 17.00 1/2"-14 3/4"-14 3/4"-14 3/4"-14(1894) (1894) (1916) (1924) (279) (324) (375) (432)HW 12 CYL 14 CYL 16 CYL 18 CYL HW 12 CYL 14 CYL 16 CYL 18 CYL 12 CYL 14 CYL 16 CYL 18 CYL20 500 †† 84.94 85.81 86.13 87.13 †† 12.75 14.75 17.00 19.00 1/2"-14 3/4"-14 3/4"-14 3/4"-14(2157) (2180) (2188) (2213) (324) (375) (432) (483)HW 12 CYL 14 CYL 16 CYL 18 CYL HW 12 CYL 14 CYL 16 CYL 18 CYL 12 CYL 14 CYL 16 CYL 18 CYL24 600 †† 104.94 105.81 106.13 107.13 †† 12.75 14.75 17.00 19.00 1/2"-14 3/4"-14 3/4"-14 3/4"-14(2665) (2688) (2696) (2721) (324) (375) (432) (483)†† Use Bevel Gear<strong>Valve</strong> SizeIN DN3 804 1006 1508 20010 25012 30014 35016 40018 45020 50024 600Dimensions Inches (mm) <strong>SV1</strong> w/Handwheel or Pneumatic CylinderH J K M N P Q S W1* W2** X Y Z3.00 8.00 0.386.002.00 2.25 4.25 6.50 6.505/8 - 11 NC 4n/a 4(76) (203) (10) (152) (51) (57) (108) (165) (165)4.00 9.50 0.507.502.00 2.25 4.50 6.50 6.505/8 - 11 NC 8n/a 8(102) (241) (13) (191) (51) (57) (114) (165) (165)6.00 11.75 0.569.502.25 2.50 6.00 9.00 8.883/4 - 10 NC 8n/a 8(152) (298) (14) (241) (57) (64) (152) (229) (225)8.00 14.38 0.5611.752.75 3.00 6.50 11.00 10.883/4 - 10 NC 8n/a 8(203) (365) (14) (298) (70) (76) (165) (279) (276)10.00 17.13 0.5614.252.75 3.00 8.19 12.25 12.007/8 - 9 NC 12n/a 12(254) (435) (14) (362) (70) (76) (208) (311) (305)12.00 19.63 0.6917.003.00 3.25 10.00 12.25 12.257/8 - 9 NC 81.00 12(305) (498) (17) (432) (76) (83) (254) (311) (311)13.25 21.63 0.6918.753.00 3.38 11.00 14.50 14.501 - 8 NC 81.13 12(337) (549) (17) (476) (76) (86) (279) (368) (368)15.25 24.00 0.6921.253.50 3.88 13.00 16.50 16.631 - 8 NC 121.13 16(387) (610) (17) (540) (89) (98) (330) (419) (422)17.25 25.75 0.6922.753.50 3.88 13.75 16.50 16.631 1/8 - 7 NC 121.25 16(438) (654) (17) (578) (89) (98) (349) (419) (422)19.25 28.00 1.1325.004.50 4.88 15.50 18.00 19.001 1/8 - 7 NC 161.25 20(489) (711) (29) (635) (114) (124) (394) (457) (483)23.25 32.75 1.1329.504.50 4.88 21.38 18.00 19.001 1/4 - 7 NC 161.38 20(591) (832) (29) (749) (114) (124) (543) (457) (483)Weight***lb kg90 41100 46130 59210 97280 128360 164480 218710 323760 3451110 5041300 590* Minimum Face to Face ** Minimum Face to Face with Load Rings (Standard) *** Weight is for Handwheel valves 3"-10", and Bevel Gear <strong>Valve</strong>s 12"-24"Refer to Sketch on page 5-4-Reference Dimensions in (parenthesis)
<strong>Fabri</strong>-<strong>Valve</strong> ® <strong>SV1</strong>With Air CylinderWith Hand WheelRefer to table on page 4-5-
<strong>Fabri</strong>-<strong>Valve</strong> ® <strong>SV1</strong> - <strong>Push</strong> <strong>Through</strong> <strong>Slurry</strong> <strong>Valve</strong>Flow CoefficientsThe Cv values below represent the U.S. gallons per minute of60°F water through a 100% open valve at a pressure drop of1 psi. The metric equivalent, Kv, is the flow of water at 16°Cthrough the valve in cubic meters per hour at a pressure dropof 1 kg/cm 2 . To convert Cv to Kv, multiply the Cv by 0.8569.<strong>Valve</strong> Size Inches (DN)Cv3 (80) 6484 (100) 1,1526 (150) 2,5928 (200) 4,60810 (250) 7,20012 (300) 10,36814 (350) 14,11216 (400) 18,43218 (450) 23,32820 (500) 28,8024 (600) 41,472Options• Alternate flange drilling• Alternate body materials• Alternate yoke materials• Alternate actuation- Hand wheel- Bevel gear- Air Cylinder- Hydraulic Cylinder- Electric- Other• Alternate wiper packing material• Alternate seat configuration without load distributionrings• Alternate seat material based on service conditions(media and temperature)• Limit switches and positioners per customers’requirements• Splash containment that allows any discharge to bepiped to a preferred locationDimensions Inches (mm) <strong>SV1</strong> w/Bevel Gear<strong>Valve</strong> Size Bevel GearIN DN Model A B C D E H J K12 300 BG314 350 BG316 400 BG418 450 BG420 500 BG424 600 BG457.88 40.81 12.00 13.59 3.50 12.00 19.63 0.69(1470) (1037) (305) (345) (89) (305) (498) (17)63.69 44.31 12.00 13.59 3.50 13.25 21.63 0.69(1618) (1126) (305) (345) (89) (337) (549) (17)65.88 48.88 12.00 16.25 3.50 15.25 24.00 0.69(1673) (1241) (305) (413) (89) (387) (610) (17)70.25 51.44 18.00 17.00 6.50 17.25 25.75 0.69(1784) (1307) (457) (432) (165) (438) (654) (17)80.63 59.31 18.00 17.00 6.50 19.25 28.00 1.13(2048) (1507) (457) (432) (165) (489) (711) (29)100.63 72.56 24.00 18.25 6.50 23.25 32.75 1.13(2556) (1843) (610) (464) (165) (591) (832) (29)Dimensions Inches (mm) <strong>SV1</strong> w/Bevel Gear<strong>Valve</strong> SizeIN DN M N P Q S W1* W2** X Y Z12 300 7⁄8 - 9 NC14 350 1 - 8 UNC16 400 1 - 8 UNC18 450 1 1 ⁄8 - 7 UNC20 500 1 1 ⁄8 - 7 UNC24 600 1 1 ⁄4 - 7 UNC8 17.0012 3.00 3.25 10.00 12.25(432) (25)1.00(76) (83) (254) (311) (311)8 18.7512 3.00 3.38 11.00 14.50(476) (29)1.13(76) (86) (279) (368) (368)12 21.2516 3.50 3.88 13.00 16.50(540) (29)1.13(89) (98) (330) (419) (422)12 22.7516 3.50 3.88 13.75 16.50(578) (32)1.25(89) (98) (349) (419) (422)16 25.0020 4.50 4.88 15.50 18.00(635) (32)1.25(114) (124) (394) (457) (483)16 29.5020 4.50 4.88 21.38 18.00(749) (35)1.38(114) (124) (543) (457) (483)* Minimum Face to Face ** Minimum Face to Face with Load Rings (Standard)Refer to Sketch on page 7Reference Dimensions in (parenthesis)-6-12.2514.5016.6316.6319.0019.00
<strong>Fabri</strong>-<strong>Valve</strong> ® <strong>SV1</strong>With Bevel GearRefer to table on page 6-7-
<strong>SV1</strong> Exploded View Parts List1 Body Mild Steel2 Guillotine Gate 316 SS3 Packing Gland Mild Steel4 Packing Acrylic Silicone5 Stem Assembly 304 SS6 Yoke Mild Steel7 Handwheel Ductile Iron8 Stem Nut Bronze9 Gate Support Liner UHMW10 Packing Gland Fasteners Plated Steel11 Gate Fasteners Plated Steel12 Yoke Fasteners Plated Steel13 Grease Fitting Plated Steel14 Body Spacer Mild Steel15 Yoke Hub Fasteners Plated Steel16 Rod Boot Nylon17 Yoke Hub Mild Steel18 Seat with Load Ring EPDM19 Stop Nut Carbon Steel20 Body Fasteners Stainless Steel21 Stem Cover Mild Steel22 Lock Pin 17-4 SS23 Rod Boot Support Plate Stainless SteelEngineered <strong>Valve</strong>sFor more information contact:Engineered <strong>Valve</strong>s1110 Bankhead AvenueAmory, MS 38821 USAPhone: (800) 541-1849(662) 256-7185Fax: (662) 256-7932Website: www.engvalves.comE-mail: engvalves.custserv@itt.com© 2008 ITT Corporation Form #<strong>SV1</strong>-08 8/08
Change language