RS Smoothbore - Exclusive-Maag Exclusive-maag

TM Series Flat Slide Parts & AccessoriesMikuni TM Pro-Series Flat Slide CarburetorsThe TM Pro-Series Carburetors feature proven performance gainswith a hand machined venturi area. Testing shows Pro-Seriescarburetor design will out flow many other factory produced Carburetorsby a minimum of 10% or more. This venturi design also provides ahigher air speed rate at lower RPM’s which results in a much stronger,smoother, wider power band. Sold pre-jetted or to customers jettingrequest. Please specify when ordering.CarburetorOrder No.39mm Pro-Series with 43mm Spigot O.D. 001-19441mm Pro-Series with 47mm Spigot O.D. 001-196For replacement parts, use the TM Flat Slide parts list on page 106.Cable Type Starter System KitReplaces knob plunger type starter system with a cable type startersystem. Sold as a kit. Two Kits available:Order No. 002-351Fits the following TM Carburetors: TM32, TM34, TM36, TM38and 39mm Pro-Series , 41mm.Pro-SeriesIncludes items A - F.Order No. 002-353Fits the following TM carburetor: VM28/418 (TM28)Includes items A - F.TM Series Throttle ValvesTM Flat Slide throttle valves. Sold each.Note: Throttle Valve for TM36-68 no longer available.Carburetor Size Mikuni No. Order No.TM24 (TM24-8001) 3.0 832-30005 002-951TM28 (VM28-418) 2.5 832-33001 002-804TM32 (TM32-1) 4.0 832-39012 002-800TM34 (TM34-2) 4.0 832-39012 002-800Old Style TM 36, TM38 Carburetor with Top Idle Adjuster RodTM36 (TM 36-2), TM38 (TM38-1, TM38 (TM38-3)2.5 832-43002 002-7343.0 832-43002 002-7354.0 832-43002 002-7375.0 832-43002 002-739New Style TM 38 Carburetor, with Side Idle Adjuster ScrewTM38 (TM38-85), TM38 (TM38-86)2.5 832-43011 007-4013.0 832-43011 007-4023.5 832-43011 007-4034.0 832-43011 007-4045.0 832-43011 007-405TM33 Pumper (TM33-8012) 1.5 832-38007 002-948TM40 (HS40) Pumper (TM40-6) TM40/81 007-430Exhaust Chemicals Intake Control Suspension Engine Electrical Vintage Tools WatercraftReplacement Parts. Sold each.Description Mikuni No. Order NoA. Starter Plunger Top, Rubber Cap VM26/46 002-061B. Cable Adjuster M21/14 002-062C. Cable Adjuster Locknut B30/247 002-065D. Starter Plunger Fitting VM15/37 002-093E. Starter Plunger Spring VM32/69 002-094F. Starter Plunger (TM32-TM41) VM15SC4/85 002-095Starter Plunger (TM28) VM15SC4/86 007-751Sudco TM Series Velocity StacksThese high flow Velocity Stacks from Sudco are designed for racingapplications and modified Mikuni TM36, 37, 38 and Pro-Series 39 & 41Carburetors. Can be used with or without air filters because of thepress-fit inside the carb’s mouth. Available in 15mm and 50mmlengths. Sold each.DescriptionOrder No.15mm Length 005-25550mm Length 005-257WEB: WWW.SUDCO.COME-MAIL: SUDCO@SUDCO.COM104