RS Smoothbore - Exclusive-Maag Exclusive-maag

Sudco Special Jetting for VM Series Round Slide Single CarburetorsVM Roundslide CarburetorsSudco can also “Special Jet” any Mikuni VM series carburetor for your particular application. Below is the information you will need to provide ourCarburetor Technician Specialist’s so they can provide you with the correct carburetor and jetting.1. Carburetor Size (mm)2. Type of Carburetor: Clamp-on, Spigot Mount, Flange Mount, Flat-Slide, etc.3. Application: Model, Year and cubic centimeters. (125cc, 250cc, etc.)4. Modifications done to engine: Explain in detail, example - big bore kit with cc change, ported cylinder, etc.5. Type of use for motorcycle: Street, Drag Racing, Road Race, Motocross, Offroad, Enduro, etc.6. Type of Fuel used7. Climate conditions: sea level, area of use, high altitude, etc.Most popular settings are already available. However, if you have modifications done, it is necessary to follow the guidelines to insure receiving theproper jetting at the closest range.Use the following part numbers when ordering for special jetting or throttle valve change.Left Idle Screw Jetting Throttle Right Idle Screw Jetting ThrottleCarburetor Change Valve Change Carburetor Change Valve ChangeVM20 001-150 001-151 VM20 ––––––– –––––––VM22 001-138 001-139 VM20 ––––––– –––––––VM26 001-110 001-111 VM26 ––––––– –––––––VM30 001-114 001-115 VM30 ––––––– –––––––VM32 001-116 001-117 VM32 001-166 001-167VM34 001-160 001-161 VM34 001-168 001-169VM36 001-122 001-123 VM36 ––––––– –––––––VM38 ––––––– ––––––– VM38 001-126 001-127VM44 001-132 001-133 VM44 ––––––– –––––––Please Note: Changes and jetting modifications are for use only on racing machines or similar off-road vehicles where pollution laws are not ineffect. Not legal for vehicles operated on public highways in the State of California or other areas where similar pollution laws may apply.Clamp-On Mount Type Flange Mount Type Spigot Mount TypeVM Series Round Slide Single Carburetor DimensionsSize (mm) A B C D Total Throttle Adjust Air Screw Weight Throttle ValveWidth Position Position (g) MaterialVM16 Clamp-On 21 ID 67 95 28 61 Left Left 446 AluminumVM18-Clamp-On 22 ID 67 108 32 61 Left Left 492 AluminumVM20 Flange 50.8 Bolt Center 66 115 43 76.5 Left Left 546 AluminumVM22 Flange 49 Bolt Center 85 114 43 82 Left Left 828 AluminumVM24 Spigot 35 80 116 43 76.5 Right Left 670 BrassVM26 Spigot 35 93 122 44 82 Left Right 550 BrassVM30 Spigot 40 93 137 59 83 Left Right 800 BrassVM32 Spigot Left Idle 40 102 142 58 83 Left Right 770 BrassVM32 Spigot Right Idle 40 102 142 58 83 Right Right 770 BrassVM34 Spigot Left Idle 40 93 137 58 83 Left Right 750 BrassVM34 Spigot Right Idle 40 93 137 58 83 Right Right 750 BrassVM36 Spigot 43 116 152 62 79 Left Right 750 BrassVM38 Spigot 43 116 154 62 79 Right Right 830 BrassVM44 Spigot 52 116 193 70 79 Left Right 1104 BrassExhaust Chemicals Intake Control Suspension Engine Electrical Vintage Tools WatercraftWEB: WWW.SUDCO.COME-MAIL: SUDCO@SUDCO.COM118