View Catalogue - Lincoln Electric

Welding wiresFlux Cored ArcOutershield MC 715-HThis wire is a like the Outershield MC710-H with higher mechanical properties. It is agoodalternative for basic wires regarding mechanical properties and better weldability.Outershield 81Ni1-HThe rutile flux cored wire Outershield 81Ni1-H is alloyed with nickel. Especiallydeveloped for heavy mining constructions. The wire has an excellent weldability incombination with excellent mechanical properties down to -50°C.ApplicationOut of position very suitable for vertical up androotruns on ceramicsFillet weldingFilling of jointsHigh depositionFlux Cored WireOutershield 71MX (mixed gas)Outershield 71CX(CO 2) /Outershield 81Ni1-HOutershield MC 710-HOutershield 81Ni1-H (1.6 & 2.0mm)Cor-A-Rosta flux cored wires for welding stainless steelCor-A-Rosta flux cored wires, available in diameters 1.2mm, have an excellentweldability. They can be welded with 100% CO 2and 80% Ar 20% CO 2mixed gas.The weld bead surface is very smooth, the weldability very good and weld spattersare minimal if the correct parameters are used. These wires can be welded withconventional equipment and compared to the solid wires, the deposition rate byposition welding is 30% higher.ApplicationFlux Cored WireWelding of stainless steel304L321 (Service temp.< 350°C)347 (Service temp.< 350°C)Cor-A-Rosta 304LWelding of stainless steel316L318 (Service temp.< 350°C)Welding stainless steel to mild steelCor-A-Rosta 316LCor-A-Rosta 309LWelding WiresFlux Cored Arcwww.lincolnelectric.com.au23