VITA ENAMIC® STAINS KIT - Vident

VITA ENAMIC ® STAINS KIT Table of contentsProduct description 3Indication und contraindication 3Technical data 3Processing 4Conditioning the surface 4Mixing the stain 5Intermediate polymerization 6Sealing 7Final polymerization 8Assortment 9Single packs / accessories 10Safety information 13Information about VITA ENAMIC hybridceramic is available atwww.vita-enamic.de2

VITA ENAMIC ® STAINS KITProduct descriptionThe VITA ENAMIC STAINS KIT contains 6 different stain powders andaccessories for characterizing the shade of surfaces (staining technique)of restorations made of VITA ENAMIC hybrid ceramic with dual networkstructure.ENAMIC crown, not characterizedThe stains of the set are cured by combining two matched hardener systems.Autopolymerization is initiated by mixing stain powder and liquid. Light curing(= final curing) at a wavelength of 350 – 500 nm stimulates and completesfinal polymerization. This dual hardener system ensures an extendedprocessing time span and enables complete curing even of extremely opaqueshade/stain mixtures.Once the VITA ENAMIC STAINS have been applied, the surface on whichshade characterization has been performed is sealed using VITA ENAMICGLAZE and homogenized, increasing the durability of the shade layer in themoist oral environment.ENAMIC crown after characterizationIndicationSystem for characterizing the shade of surfaces made of VITA ENAMIC hybridceramic with dual network structure.Additionally, VITA ENAMIC STAINS can be used for conventional compositeand resin materials.ContraindicationPersons who are allergic to constituents of the VITA ENAMIC STAINS KIT.Technical data• Chemical compositionProductComponentsVITA ENAMIC STAINVITA ENAMIC STAINS LIQUIDVITA ENAMIC GLAZETitanium dioxideDibenzoyl peroxideMethyl methacrylateAromatic urethane acrylateMethyl methacrylate, acrylic resin,pentaerythritol tetraacrylate,pentaerythritol triacrylate, photoinitiator3

VITA ENAMIC ® STAINS KITProcessingMixing the stainMix the respective stain powder with VITA ENAMIC STAINS LIQUID on theporcelain mixing plate using a glass or plastic spatula.The mixing ratio can be varied as required as long as the mixture can be easilyspread. Varying the mixture allows the intensity of the hue to be adjusted, creatingresults ranging from aqueous/transparent to opaque hues that offer full coverage.Processing timesProcessing time span of the final shade mixture: approx. 10 minThe processing time span can be extended by diluting with liquid. In the case oflonger breaks between work, it is recommended that the mixing plate be coveredusing a lightproof lid in order to avoid premature polymerization of the mixture.Shade (stain) mixtures that have dried out can be prepared using liquid withoutaffecting the quality.Application of the stainThe stain is applied with the enclosed brush (size No. 1).If required, intermediate polymerization can be performed after each individuallayer of shade is applied.Important:Once staining has been completed and before sealing the surface using VITAENAMIC GLAZE, the applied shade must be polymerized, as the shade layer couldotherwise be inadvertently diluted or changed as a result of subsequent sealingusing VITA ENAMIC GLAZE.5

VITA ENAMIC ® STAINS KITProcessingIntermediate polymerization of the applied stain layer*• With dental curing lampsManufacturer Unit Program TimeIvoclar Vivadent Bluephase C8 High(800 mW/cm 2 )30 sec.Ivoclar Vivadent Astralis 10 HIP(1,200 mW/cm 2 )20 sec.Ultradent Valo LED Xtra power(3,200 mW/cm 2 )6 sec.• With dental-technical polymerization unitsManufacturer Unit TimeDreve Polylux PT 5 min.Hager & Werken Speed Labolight 5 min.Heraeus Kulzer Heraflash 2 x 180 sec.* For reasons of statutory product liability, no information can be provided for light curing units of other manufacturers.The quality of curing depends on the luminous intensity and the wavelength of light radiation, among others.Important:The staining brushes are cleaned using VITA VM LC CLEANER. Before further use,brushes must be dried thoroughly, e.g. on tissue, as residual CLEANER on the brushcan contaminate stain mixtures, preventing them from being correctly polymerized.6

VITA ENAMIC ® STAINS KIT ProcessingSealing the applied stain with VITA ENAMIC GLAZEThe use of VITA ENAMIC GLAZE is mandatory as it is used for sealing andhomogenizing surfaces on which shade characterization has been performed andincreases the durability of the shade layer in the moist oral environment.Add a small drop of VITA ENAMIC GLAZE on the porcelain mixing plate and closethe bottle again immediately.Important:The sensitive photoinitiator contained in VITA ENAMIC GLAZE can be activated bylighting at the work surface or by OR lighting.Using the enclosed disposable microbrush applicator, quickly apply a single coatof VITA ENAMIC GLAZE to the entire restoration to create a thin and even layer.Avoid the formation of puddles!7

VITA ENAMIC ® STAINS KIT Processing*Final polymerization of stain and VITA ENAMIC GLAZE*The varnish can be polymerized with all standard dental light-curing units witha spectral range of 350 - 500 nm. All coated surfaces must be completelypolymerized.• With dental curing lampsManufacturer Unit Program Time 1)Ivoclar Vivadent Bluephase C8 High(800 mW/cm 2 )60 sec.Ivoclar Vivadent Astralis 10 HIP(1,200 mW/cm 2 )60 sec.Ultradent Valo LED Xtra power(3,200 mW/cm 2 )30 sec.• With dental-technical polymerization unitsManufacturer Unit Time 1)Dreve Polylux PT 10 - 15 min.Hager & Werken Speed Labolight 10 min.Heraeus Kulzer Heraflash 3 x 180 sec.* For reasons of statutory product liability, no information can be provided for light curing units of other manufacturers.The quality of curing depends on the luminous intensity and the wavelength of light radiation, among others.1)Important:Minimum times are indicated.To avoid irritation of the mucous membrane, appropriate polymerizationof VITA ENAMIC GLAZE must be ensured. The surface must not be stickyafter curing.Completed VITA ENAMIC crown with shadecharacterizationPlease make sure whether your polymerization unit features the intensity andwavelength required for complete curing.8

VITA ENAMIC ® STAINS KIT Product lineVITA ENAMIC ® STAINS KITQuantity Content Product name Prod. No.1 2 g VITA ENAMIC STAIN,1 white1 2 g VITA ENAMIC STAIN,2 corn1 2 g VITA ENAMIC STAIN,3 brown1 2 g VITA ENAMIC STAIN,4 khaki1 2 g VITA ENAMIC STAIN,5 blue1 2 g VITA ENAMIC STAIN,6 black1 20 ml VITA ENAMIC STAINSLIQUID1 20 ml VITA ENAMIC GLAZEincl. 20 microbrushdisposable applicatorsEENST012EENST022EENST032EENST042EENST052EENST062EENSTL20EENSTG201 50 ml VITA VM LC Cleaner CVMLC502 - Brush No. 1 B0851 - Plastic mixingspatula, double-ended1 - Porcelain mixing plate,blackC013C004Prod. No. EENSTKITAll products included in the assortment are available separately.9

VITA ENAMIC ® STAINS KIT Individual packs / AccessoriesVITA ENAMIC STAINStain powder, which is mixed with VITA ENAMIC STAINS LIQUID. Even veryopaque mixtures can be thoroughly cured by combining self-curing and light-curing(wavelength: 350 – 500 nm).Bottle cont. 2 g.Prod. No. EENST012 – EENST062VITA ENAMIC STAINS LIQUIDSpecial liquid for mixing the VITA ENAMIC STAINS.Bottle cont. 20 ml.Prod. No. EENSTL20VITA ENAMIC GLAZETransparent, highly abrasion-resistant light-curing varnish for sealing surfaces ofrestorations made of VITA ENAMIC which were individualized with VITA ENAMICSTAINS. Biofilm adhesion is reduced significantly thanks to the special surfaceenergy.Bottle cont. 20 ml incl. 1 pack of 20 microbrush disposable applicators.Prod. No. EENSTG20VITA VM LC CleanerSolution for removing unpolymerized resin from the instruments.Bottle cont. 50 mlProd. No. CVMLC50Mixing platePorcelain, black glazed, with 11 recesses, incl. lid.Dimensions: 8.5 x 11 cm.Prod. No. C01410

VITA ENAMIC ® STAINS KIT Individual packs / AccessoriesPlastic mixing spatulaWhite spatula, double-ended, for mixing VITA ENAMIC STAIN.Prod. No. C013Brush No. 1Red marten brush with black wooden handle.Prod. No. B085Disposable brush tipsBrush tips for single use.Pack cont. 50 pieces.Prod. No. FCPSBrush holderWhite brush holder for disposable brush tips.Prod. No. FCPHWVITA ENAMIC MicrobrushDisposable applicators for the application of VITA ENAMIC GLAZE to thecharacterized restoration made of VITA ENAMIC.Pack cont. 20 pieces.Prod. No. EENSTMB2011

VITA ENAMIC ® STAINS KITIndividual packs / AccessoriesVITA CERAMICS ETCHHydrofluoric acid gel, 5%, for etching hybrid and silicate ceramics, red colored.Syringe of 3 ml or bottle cont. 6 ml.Prod. No. FCE3 (syringe)Prod. No. FCE6 (bottle)VITASIL ®Single-component silane bonding agent, syringe of 3 mlProd. No. FVS312

VITA ENAMIC ® STAINS KITSafety informationThe following products require hazard identification:VITA CERAMICS ETCH(hydrofluoric acid ceramicetching gel)Caustic/ToxicToxic on inhalation, in contact with skin and if swallowed.Causes severe burns. Store container well sealed at anadequately ventilated place. In case of contact with eyes, rinsethoroughly with water and consult a doctor. In case of contactwith skin, rinse immediately with copious amount of water.In case of accident or if you feel unwell, seek medical adviceimmediately (show the label where possible). Keep awayfrom living quarters. This material and its container mustbe disposed of as hazardous waste.TVITA ENAMIC STAIN* Contains dibenzoyl peroxide, CAS: 94-36-0May cause allergic skin reactions.Avoid inhalation of dust/smoke/gas/fog/vapor/aerosol.Wear protective gloves/protective clothing/eye and faceprotection. In case of skin irritation or rash: seek medicaladvice/consult a doctor. Dispose of contents/container inaccordance with local/regional/national/internationalregulations.VITA ENAMIC STAINS*LIQUIDContains methyl methacrylate, CAS: 80-62-6Aromatic urethane acrylateHighly flammable liquid and vapor. Causes skin irritation.Causes severe eye irritation. May cause allergic skin reactions.May irritate the respiratory tract.Keep away from heat / sparks / open flame / hot surfaces. Nosmoking. Use explosion-proof electrical equipment/ventilationsystems/illumination.IN CASE OF CONTACT WITH THE SKIN (or hair): Remove/takeoff all contaminated clothing immediately. Rinse skin withwater/shower.IN CASE OF CONTACT WITH EYES: Rinse carefully with waterfor some minutes. Remove contact lenses if worn and easy todo so. Continue rinsing. Keep locked up.Dispose of contents/container in accordance with local/regional/national/internationalregulations.13

VITA ENAMIC ® STAINS KITSafety informationVITA ENAMIC GLAZE* Contains methyl methacrylate, CAS: 80-62-6Pentaerythritol tetraacrylate, CAS: 4986-89-4Pentaerythritol triacrylate, CAS: 3524-68-3Acrylic resinPhotoinitiatorHighly flammable liquid and vapor. Health hazard. Suspectedof damaging fertility or the unborn child.Causes skin irritation. Causes severe eye irritation. May causeallergic skin reactions. May irritate the respiratory tract.Keep away from heat / sparks / open flame / hot surfaces. Nosmoking. Use explosion-proof electrical equipment/ventilationsystems/illumination.IN CASE OF CONTACT WITH THE SKIN (or hair): Remove/takeoff all contaminated clothing immediately. Rinse skin withwater/shower.IN CASE OF CONTACT WITH EYES: Rinse carefully with waterfor some minutes. Remove contact lenses if worn and easy todo so. Continue rinsing. Keep locked up.Dispose of contents/container in accordance with local/regional/national/internationalregulations.VITA VM LC CLEANERHighly flammableContains ethanolStore container well sealed at an adequately ventilated place.Keep away from ignition sources. - No smoking. Do not emptyinto drains. This material and its container must be disposed ofas hazardous waste.FProtective clothingWhen working with the product, wear suitable safety goggles/face protection, gloves and safety clothing.* Classification according to GHS, globally harmonized system for classification and labeling of chemicals.The respective safety data sheets can be downloaded at www.vita-zahnfabrik.comor requested by fax at (+49) 7761-562-233.14

VITA ENAMIC ® STAINS KIT Notes15

With the unique VITA SYSTEM 3D-MASTER, all naturaltooth shades can be systematically determined and perfectlyreproduced.Please note: Our products should be used according to the working instructions. Weaccept no liability for any damage resulting from incorrect handling or usage. Theuser is furthermore obliged to check the product before use with regard to its suitabilityfor the intended area of applications. We cannot accept any liability if the productis used in conjunction with materials and equipment from other manufacturers whichare not compatible or not authorized for use with our product. Furthermore, our liabilityfor the correctness of this information is independent of the legal ground and,in as far as legally permissible, is limited to the invoiced value of the goods suppliedexcluding turnover tax. In particular, as far as legally permissible, we do not assumeany liability for profit loss, for indirect damages, for consequential damages or forclaims of third parties against the purchaser. Claims for damages based on faultliability (fault in making the contract, breach of contract, unlawful acts, etc.) canonly be made in the case of intent or gross negligence. The VITA Modulbox is notnecessarily a component of the product.Date of issue of this product information: 05.13Manufactured byVITA ENAMIC ® STAIN, VITA ENAMIC ® STAINS LIQUID, VITA ENAMIC ® GLAZE:Innovation MediTech GmbH · Max-Planck-Str. 31 · 59423 Unna / GermanyPhone: +49 (0) 2303 8807-0 · Fax: +49 (0) 2303 8290-9www.innovation-meditech.com · info@innovation-meditech.comInnovation MediTech GmbH has been certified in accordance with the MedicalDevice Directive and the following products bear the CE mark:VITA ENAMIC ® STAIN VITA ENAMIC ® STAINS LIQUID VITA ENAMIC ® GLAZEbluephase ® and Astralis ® are registered trademarks of Ivoclar Vivadent AG, Schaan,Liechtenstein. Valo ® is a registered trademark of Ultradent Products, Inc., SouthJordan, USA. Heraflash ® is a registered trademark of Heraeus Kulzer GmbH, Hanau,GermanySold by1931E – 0513 (X.) S – Version (02)VITA Zahnfabrik H. Rauter GmbH & Co.KGPostfach 1338 · D-79704 Bad Säckingen · GermanyTel. +49 (0) 7761/ 562-0 · Fax +49 (0) 7761/ 562-299Hotline: Tel. +49 (0) 7761/ 562-222 · Fax +49 (0) 7761/ 562-446www.vita-zahnfabrik.com · info@vita-zahnfabrik.comfacebook.com/vita.zahnfabrik