Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>VITA</strong> ENAMIC ® <strong>STAINS</strong> <strong>KIT</strong>Product descriptionThe <strong>VITA</strong> ENAMIC <strong>STAINS</strong> <strong>KIT</strong> contains 6 different stain powders andaccessories for characterizing the shade of surfaces (staining technique)of restorations made of <strong>VITA</strong> ENAMIC hybrid ceramic with dual networkstructure.ENAMIC crown, not characterizedThe stains of the set are cured by combining two matched hardener systems.Autopolymerization is initiated by mixing stain powder and liquid. Light curing(= final curing) at a wavelength of 350 – 500 nm stimulates and completesfinal polymerization. This dual hardener system ensures an extendedprocessing time span and enables complete curing even of extremely opaqueshade/stain mixtures.Once the <strong>VITA</strong> ENAMIC <strong>STAINS</strong> have been applied, the surface on whichshade characterization has been performed is sealed using <strong>VITA</strong> ENAMICGLAZE and homogenized, increasing the durability of the shade layer in themoist oral environment.ENAMIC crown after characterizationIndicationSystem for characterizing the shade of surfaces made of <strong>VITA</strong> ENAMIC hybridceramic with dual network structure.Additionally, <strong>VITA</strong> ENAMIC <strong>STAINS</strong> can be used for conventional compositeand resin materials.ContraindicationPersons who are allergic to constituents of the <strong>VITA</strong> ENAMIC <strong>STAINS</strong> <strong>KIT</strong>.Technical data• Chemical compositionProductComponents<strong>VITA</strong> ENAMIC STAIN<strong>VITA</strong> ENAMIC <strong>STAINS</strong> LIQUID<strong>VITA</strong> ENAMIC GLAZETitanium dioxideDibenzoyl peroxideMethyl methacrylateAromatic urethane acrylateMethyl methacrylate, acrylic resin,pentaerythritol tetraacrylate,pentaerythritol triacrylate, photoinitiator3