Information 512 KB - Solavanti Lighting

THE PRODUCTS IN THIS CATALOG ARE TESTED AND HAVE BEEN FOUNDTO CONFORM TO THE APPROPRIATE UL STANDARDS FOR SAFETY.SOLAVANTI LIGHTING UTILIZES THE TESTING AND CERTIFICATIONSERVICE OF ETL, A NATIONALLY RECOGNIZED TESTING LABORATORY.LAMP Lighting by SOLAVANTI Lighting catalog A1-PR-7000-700-000 SRP $14.50www.solavantilighting.com

yLamp by Solavanti provides you with efficient lighting solutions byadapting its products and services to your project needs.

PICTOGRAMSDefinitionsCLASSILuminaire in which protection against electric shocks is based, in addition to the main insulation, upon the earthing of accessible conductive partsLuminaire in which protection against electric shocks is not based upon the main insulation, but rather upon complementary safety measures such asdouble insulationLuminaire in which protection against electric shocks is based on a very low safety voltage.Luminaires with ballast or transformers suitable for direct mounting on norma-XXºMaximum adjustment angle of the luminaire.XXXºMaximum adjustment angle of the luminaire.XXºXXºXXºXXºMaximum adjustment angle of the two axes of a cardan system luminaire.GLASSLuminaire with built-in glass screen.INOXAISI XXXStainless Steel.PCAlAluminum bodyXXXºindicated temperature.ø XXXFloor aperture diameter.ø XXXCeiling aperture diameter.XXX x XXXRectangular ceiling aperture dimensions.Max. XX inmMaximum panel thickness for luminaire anchoring point.Luminaire with lamp included.154 150

LAMPSIncandescentE27A-60/A-65Descripción Power W Ra Luminous flux (lm) Socket ø in L inIncandescent lamp A60 / A6560751001A7009151330E27E272.4"2.6"4.1"4.8"G4QT 9QT-9 halogen lamp10 1A 140 G4 0.4" 1.3"GY6.35QT 12QT-12 halogen lamp203550751001A3006009501,5752,200GY6.35 0.5" 1.7"E27PAR20PAR 20 halogen lamp50 1A --- cd E 27 2.5" 3.6"E27PAR30PAR-30 halogen lamp75 1A --- cd E 27 3.8" 3.6"E27PAR38PAR-38 halogen lamp751001201A--- cdE 27E 27E 274.9"4.9"4.8"5.4"5.4"5.4"BA15dQR-70OSRAM50 1A --- cd BA15d 2.8" 2.0"G 53AR-11130/355075100GU 5.3 20QR-CBC51Halogen lamp with 12V 1.2”/2.0” dichroic reflector35501A1A--- cd--- cdG53G53G53G53GU5.3/GU4GU5.3/GU4GU5.34.4"4.4"4.4"4.4"2.0"/1.4"2.0"/1.4"2.0"1.8"1.8"1.9"1.9"1.8"1.8"1.8"R7 sQT-DEDouble ended halogen lamp150200300500100015001A22003200500095002200033000Rx7s R7s 0.5"4.5"4.5"4.5"4.57.3"9.9"Light emitting diodeLEDLEDDescripcion Power W Equipment TypeLight emitting diodeLight emitting diode1.22.43.61.2 - 3.61.2 - 3.60.25 - 0.5350 mA700 mA1000 mA12 V24 V150-500mA12/24 VHigh powerMedium powerColor Min. Max.Cool White 5,000 ºK 10,000 ºkNeutral White 3,700 ºK 5,000 ºKWarm White 2,600 ºK 3,700 ºKRGB - -LEDSIGNLight emitting diode for signaling0.06 - 0.112 V24 VLow power156 152

LAMPSFluorescents LampsG13T8/T26Fluorescent Ø 1.0"1836581B135033505200G13 2623.2"47.2"59.1"G5T5/T16Fluorescent Ø 0.6"HE14-2835HO24395480VHO--951201BHE1200-28503650HO1750310044506150VHO--72009300G5 0.6"HE21.6"-45.2"57.0"HO21.6"33.4"45.2"57.0"VHO--45.2"57.0"G24d-1TC-DCompact Fluorescent Double1318261B90012001800G 24-d1G 24-d2G 24-d31.3"5.4"6.0"6.8"G24q-2TC-DECompact Fluorescent Double Electronic1318261B90012001800G 24-q1G 24-q2G 24-q31.3"5.2"5.7"6.5"GX24dTC-TGX24qTC-TE2 G 11TC-LE 27TC-TSECompact Fluorescent TripleCompact Fluorescent Triple ElectronicCompact Fluorescent LongCompact Fluorescent with ballast18 1B 1200 G 24-d2 1.9" 4.8"2632425770182436558020231B1B1B180024003200430052001200180029004800600012001500GX 24-q3GX 24-q3GX 24-q4GX 24-q5GX 24-q61.9"1.9"1.9"2.3"2.3"2G 11 -E 272.0"2.3"5.2"5.6"6.4"7.0"8.28.9"12.4"16.3"21.1"22.6"6.0"7.0"Gx53Disc Compact Fluorescent9 1B280250360GX53 3.0"0.9"1.1"1.0"GR14q-1PL-RECO Compact Fluorescent14171B12001500GR14q-11.6"1.6"4.8"5.7"2GX13TL5cCircular Compact Fluorescent60 1B 5000 2GX13 0.6" ø14.9"General lamp characteristicsLamp Power W Flux Efficiency lm/w Average life (h) CRIStandard incandescent 100 1380 14 1000 100Efficiency sectionHalogen incandescent 300 5000 17 2000 100Compact Fluorescent 26 1800 75 15000 >80Tubular fluorescent 36 3350 93 20000 >80Metal Halide 150 14000 93 15000 >80High Pressure Sodium 100 10700 107 32000 >25Low Pressure Sodium 135 22600 167 22000 -LED power 1.2 107-130 89-108 50000 70-93INFO157 153

LAMPSGlow dischargeDescription Power W Ra Luminous flux (lm) Socket ø in L inPGJ5CDM-TmCDM-Tm Metal Halide20301A-1B16503000PGJ5 0.7" 3.0"E27HI-PAR30HI-PAR30 Metal Halide35701A-1B --- cd E 27 3.8" 4.9"GX 8.5CDM-R11135701A --- cd GX8.5 4.4" 3.7"E40HIDMetal Halide Tubular2504001B2000032000E 401.8”2.4"8.9"10.8"HID-DEG12HIDDouble Ended Tubular Metal HalideBipin Metal Halide lamp7015025040039701502501A/1B1A/1B5000110002050035000330066001270023000RX7sRX7s-24FC 2FC 2G120.8"0.9"1.0"1.0"0.8"0.8"0.8"0.9"4.5"5.2"6.4"8.1"3.9"3.9"4.3"5.1"G8.5HID-TCCompact Metal Halide lamp39701A/1B33006400G8,5 0.6"max.3.3"E40HIEMetal Halide Elliptical2504001B1900032000E 403.5"4.7"8.9"11.4"PGZ12CPO-TMetal Halide lamp CPO-T601402A660016500PGZ 12 0.7"5.0"5.6"GX12-1SDW-TGHigh Pressure Mini White SON lamp501001B24004900GX12-1 0.8"3.5"3.8"PG12-1HSTHigh Pressure White Sodium lamp501001B23004700PG 12-1 1.2"0.7"0.8"E27/E40HSTHST-DEHigh Pressure Sodium TubularHigh Pressure Sodium Tubular5070100150701502504002504006001000444400660010700175006800150002500048000332005650090000130000E27E27E40E40R x 7sR x 7s - 24FC2FC2E40E40E40E401.5"1.5"1.9"1.9"1.9"1.9"1.9"2.6"0.8"0.9"2.8"2.8"6.1"6.1"8.3"8.3"4.5"5.2"6.1"6.1"10.1"11.1"11.1"14.0"E27/E40HSEHigh Pressure Sodium Ellipsoidal701001502504004 2B/44 2B/42B/456009500155003000054000E27E40E40E40E402.8"3.0"3.5"3.5"4.7"6.1"7.3"8.9"8.9"11.4"E27/E40HMEHigh Pressure Mercury Vapour Elliptical801252504003400065001400024000E 27E 27E 40E 402.8"3.0"3.5"4.9"6.1"6.7"8.9"11.4"158 154

DEGREE OF PROTECTION IP, IKCode system which indicates the degree of protection given by abody and the protector against harmful mechanic impacts.Code IK IK00 IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10Impact energy (J)0.15 0.2 0.35 0.5 0.7 1 2 5 10 20* Not protected The nomenclature comes symboli-IP RATINGIn agreement with the norm EN 60598-1, the luminaires are classified according to the derived protection of its constructive elements. The nomenclature comes symbolisedby the letters IP followed of three figures, although the two first ones are indicated.as well as to the people in respect to the tension of the components of theluminaire.0 - Not protected.1 - Protection against solid bodies bigger than 2.0”.2 - Protection against solid bodies bigger than 0.5”.3 - Protection against solid bodies bigger than 0.1”.4 - Protection against solid bodies bigger than 0.04”.5 - Protection against the dust.6 - Complete protection against the dust.IP20Protection of the material to the penetration of liquid0 - Not protected.1 - Protected against steady dripping.2 - Protected against falling water to a maximum 15°.3 - Protected against rain.4 - Protected against sprays.5 - Protected against water jets.6 - Protected against waves.7 - Water-tight immersion.8 - Water-tight against immersion.INFO159 155

LAMP A1-PR-7000-700-000, (01/2013)byPublished by:Solavanti Lighting, LLCCoordination, Graphic Desing, Layout and Editorial:Dept. Marketing LAMP by SolavantiPhotography:Xavier Graells, Miquel Llonch, Dept. Marketing LAMP, Pablo Sarabia, Jose ManuelBielsa, Santos-Diez, Pablo Arza, Joan Villaplana, Biel Calafat, Jordi Pujol, Marc Sellarès,Emma Faucheux, Joan Roig, Julien Daviron, Isabel Marquès, Rafael Vargas,Meritxell Arjalaguer, Maria de Miguel, Roland Halbe, Duccio Malagamba.Printed by:156

SOLAVANTI LIGHTING LLC STANDARD TERMS AND CONDITIONS OF SALEOFFER AND ACCEPTANCE: Purchaser has offered to purchase from Solavanti Lighting (“Seller”) certain lighting products (“Goods”). Seller’s acceptance of this offer is expresslyconditioned upon Purchaser’s assent to the terms and conditions set forth herein. If terms are submitted in response to a purchase order or other written or oral offer of the Purchaserto purchase the Goods, to the extent that there are any material differences or additions in the terms contained in the Purchaser’s offer, the terms listed herein shall be considered acounteroffer to sell the Goods to Purchaser under the terms and conditions herein contained. This Acknowledgment supersedes all previous quotations and agreements relating to theGoods. Purchaser’s offer, Seller’s counteroffer (if any), and any acceptance there of shall be governed by the laws of the State of Texas. Any action, suit, or other legal proceeding whichis commenced to resolve any matter arising under or relating to any provision of this agreement shall be commenced and prosecuted only in a court located in Dallas County, Texas,and Buyer consents to the jurisdiction of such a court.DELIVERY AND TITLE: Except as may be otherwise specified by Seller, delivery will be FOB point of shipment. All shipping dates are estimated and under no circumstances does Sellerguarantee date of shipment. Seller shall not be liable for any delay in delivery of any Goods or any other default due to occurrences or contingencies, including, but not limited to, fire,flood, embargo, strike, failure to secure materials or labor from usual sources of supply, governmental restrictions considered “force majeure”, delays occasioned by any subcontractors,acts of God, acts of governmental or military authorities, delay in transportation, labor difficulties or any other circumstances beyond Seller’s control which shall prevent Seller fromperforming in the normal and usual course of it’s business.Risk of loss and title to all goods furnished by Seller shall pass directly to Buyer at the FOB point of shipment.WARRANTIES: THERE ARE NO EXPRESS WARRANTIES HEREUNDER, EXCEPT THAT ALL GOODS SHALL BE FURNISHED IN ACCORDANCE WITH THE DESCRIPTION ANDSPECIFICATIONS FURNISHED BY SELLER SUBJECT TO THE STANDARD MANUFACTURING VARIATIONS AND PRACTICES OF SELLER. ALL IMPLIED WARRANTIES(INCLUDING, BUT NOT BY WAY OF LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS) ARE HEREBY EXCLUDED. ANY OUTSTANDING INVOICEBALANCES BEYOND THE COMPANY’S PAYMENT TERMS WILL VOID ALL WARRANTIES. ANY WARRANTY SHALL EXPIRE TWELVE (12) MONTHS FOLLOWING THE DATEOF SHIPMENT OF SUCH PRODUCTS OR PARTS TO THE PURCHASER. ALL WARRANTY RIGHTS ARE VALID TO THE ORIGINAL PURCHASER OF THE PRODUCTS ORPARTS. ALL WARRANTIES ARE NONTRANSFERABLE TO A THIRD PARTY.BUYER’S REMEDIES: Claims respecting the condition of Goods or their non-compliance with specifications must be made by Buyer promptly after receipt of such Goods, and Sellermust be given reasonable opportunity to investigate. Buyer shall set aside and hold such Goods, without further processing or installation, until Seller advises Buyer regarding thedisposition to be made of it, which advice Seller hereby agrees to furnish within a reasonable time. Any transportation charges involved in such disposition shall be borne by Buyer.SELLER’S LIABILITY FOR ANY BREACH OF WARRANTY WITH RESPECT TO GOODS SHALL BE LIMITED TO REPLACEMENT OR REPAIR OF NON-CONFORMING GOODS,OR, AT SELLER’S OPTION, CREDIT OF THE PURCHASE PRICE THEREOF. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES OR CLAIMS FORLABOR, PROCESSING OR INSTALLATION BY REASON OF ANY SUCH BREACH OR WARRANTY. BUYER SHALL HAVE NO RIGHT TO “COVER” BY PROCURING SUBSTITUTEGOODS AT THE COST OR EXPENSE OF SELLER. PURCHASER FURTHER AGREES TO INDEMNIFY AND HOLD SELLER HARMLESS FROM AND AGAINST ALL LOSSES,DAMAGES, OBLIGATIONS, LIABILITIES, SUITS AND CAUSES OF ACTION ARISING FROM ANY BREACH OF WARRANTY UNDER THIS SECTION.Any action for breach of this agreement arising out of the sale of Goods must be commenced within one year after the cause of action has accrued, or shall thereaf-ter be forever barred.PRICES: Prices are those in effect at the time of shipment. In the event of a published increase or reduction in prices by Seller, the new price will become effective immediately on theunshipped portion of the order at the time of the change. In no event, however, will a reduction in price be retroactive to shipments made prior to the date of the price change. Uponacceptance by Seller, Purchaser’s order will not thereafter be subject to cancellation nor to deferment of deliveries without Seller’s written consent.TAXES: Purchaser shall reimburse Seller for any sales, use, occupation, excise, or other tax arising out of sales of products or services to the purchaser upon receipt of Seller’s invoicefor the amount of the tax. At the option of the Company, Purchaser shall provide Seller with a tax exemption certificate acceptable to the appropriate taxing authorities.TERMS OF PAYMENT: Payment terms are 50% non-refundable deposit with the buyer’s submission of, and the sellers acceptance of the purchase order. The remaining 50% invoicebalance is due in net thirty (30) days after buyer’s receipt of the completed order. In the event of late payments or Seller’s insecurity with respect to Buyer’s credit standing, Seller in itssole discretion, may change its credit terms, terminate its obligations hereunder and/or require payment in advance of delivery. Pro rata payments shall become due as invoiced.TECHNICAL ADVICE: It is expressly understood that any technical advice furnished by Seller with respect to the use of its goods or services is given without charge and that Sellerassumes no obligation or liability for advice given or results obtained, all such advice being given and accepted at Buyer’s risk.CANCELLATION OR REVISIONS: Any order may be canceled or revised by Buyer only upon written approval of Seller in its sole discretion, and upon payment of cancellation or revisioncharges specified in said approval which shall take into account expenses previously incurred, commitments made by or in reliance upon such order, whether or not such commitmentsare legally binding on Seller and any other factors considered relevant by Seller.LIMITATION ON LIABILITIES: The sole and exclusive remedies of the Purchaser shall be those specifically set forth above. Seller’s maximum liability for any and all claims arisingdirectly or indirectly from the performance of its obligations hereunder, whether resulting from Seller’s negligence or otherwise, shall not in the aggregate exceed the purchase price ofthe Goods. Under no circumstances shall Seller be liable to the purchaser or any third party for loss of business or profit or any other economic loss, or any incidental indirect, specialor consequential damages.LITIGATION: If Seller prevails in a lawsuit or other action arising out of or related to this sale, the purchased products or services, this agreement, or breach of this agreement, Sellerwill be entitled to recover its reasonable attorney’s fees and costs of suit. Costs include fees for consultations and testimony from experts such as appraisers and engineers. If Seller isrequired to initiate or defend against litigation with a third party because of the violation by Purchaser of any term or provision of this agreement, or obligation of Purchaser, Seller will beentitled to recover reasonable attorneys fees and costs from Purchaser. Attorney’s fees will include those incurred on appeal.NON-WAIVER BY SELLER: Waiver by Seller of a breach of any of the terms and conditions of any contract shall not be construed as a waiver of any other breach.PROPERTY:SOLAVANTI LIGHTING CATALOGS, PRINTED OR IN DIGITAL FORM, ARE SUBJECT TO THE COPY RIGHT AND OTHER INTERLECTUALPROPERTY PROTECTION OF THEUNITED STATES OF AMERICA AND FOREIGN COUNTRIES. UNORTHORIZED USE OR REPRODUCTION WITHOUT SOLAVANTI’S WRITTEN CONSENSE IS PROHIBITED.