11 36 AZD - Variable camshaft control tightening torques - Ad Kusters

11 36 Variable Camshaft ControlType Thread Tightening specification Measure1AZ 4/2-way valve/solenoid valve toVANOS housingM52 / M52TU /M54 / S52 /S50 US / M50VANOS30 Nm2AZ Banjo bolt to VANOS adjustment unit M52 / M52TU /M54 / S52 /S50 US / M50VANOSM14 x 1.532 Nm3AZ Screw plug to VANOS adjustmentunitM52 / M52TU /M54 / S52 /M22 x 1.550 NmS50 US / M50VANOS4AZ Left-hand thread:M52TU / M54 M6 10 NmSet screw for hydraulic piston totoothed shaft5AZ Hydr. line for VANOS on oil filteraggregate carrierM52 / M52TU /M54 / S52 /S50 US / M50VANOS32 Nm6AZ Collar nut on spline shaft S50 M6 9 Nm7AZ Cover to VANOS adjustment unit(hydraulic piston inlet side)8AZ Filter screw to VANOS adjustmentunit9AZ Pressure line to VANOS adjustmentunitPressure line to pressureaccumulator and VANOS adjustmentunit10AZ Cover for solenoid valve to VANOSadjustment unitS50 M5 5 NmS50 M10x1 12 NmS62 / S54 M10x1 13 NmS50 M12 x 1 20 NmS50 B 30 M5 8.8 6 NmS50 B 32 M5 10.9 8 NmS62 M7 10.9 19 NmAZD Variable Camshaft Control BMW AG - TIS 17.04.2004 17:06Issue status (10/2001) Valid only until next CD is issued Copyright Page - 1 -

11AZ Cover to VANOS adjustment unit(exhaust side)S54 / S50 B32M6 10.913 Nm12AZ Solenoid valve on distributor M62 VANOS M27x1.5 25 Nm13AZ Left-hand thread:Exhaust sprocket wheel to exhaustcamshaft14AZ Left-hand thread:M62 VANOS M12x1.5 125 NmM62 VANOS M12x1.5 110 NmCamshaft adjustment unit to inletcamshaft15AZ Left-hand thread:Nut of sensor gear screw fitting16AZ Adjustment unit to exhaust or inletcamshaftM62 VANOS M18x1.5 40 NmN42 M10x1 Replace screwsJointing torque20 NmTorque angle 90 °Torque angle 90 °AZD Variable Camshaft Control BMW AG - TIS 17.04.2004 17:06Issue status (10/2001) Valid only until next CD is issued Copyright Page - 2 -