First fix cordless framing nailer

Gas nailer GN900SEFirst fix cordless framing nailerSatisfying the professional’s needsThe new gas nailer designed for the demands of the professional.Suitable for timber frames, roofing, joist and a host of other applicationsMakita now have a better solution with this easily portable machine.

Gas nailer GN900SEFire up to 7,200nails per hour.The Makita clipped head gas nailer has arrived!Using tried and tested technology. It is suitablefor timber frames, roofing, joist and a host ofother applications we now have the answer,in an truly portable machine.Gas cell chamberQuick and easy load system.No leads, no hoses, just fast and versatile power.The GN900SE uses our tried and tested Lithium-ion7.2 volt battery system with a 30 minute charge timewhich makes the Makita GN900SE four times quickerthan the leading competitor. The small and lightweight 7.2 volt battery will allow you to fire up to 4000nails per charge. The GN900SE features our LEDlow battery and error detection system, and a shockabsorbing battery fitting to protect the terminalsLED lightservice indicatorGreen: Good batteryRed: Low/dead batteryOrange: Error codesThe 40 gram gas cell will allow you to fire up to 1200shots per cell using our 34º nail and gas packs at arate of 2-3 nails per second.In true Makita tradition the gas nailer is light weight,comfortable and perfectly balanced, it is also easyto use and well engineered. All that you have cometo expect from Makita.Charges 4 times quickerthan the leading competitor.30 minutecharge timeHex wrenchAttached to the machine foreasy access to adjust the depthof the nail drive.Battery BL7010Charger DC07SA7.2v Li-ion batteryUse of a li-ion battery allowsfor compact and lightweighttool design. 30 min charge time.The only gas nailer withLithium-ion battery technology

Air filterProtects cylinder from dirt anddebris to prevent malfunction.HookEasily clipped on toa belt or extendsto sit over smalljoists and scaffolding.44 nail magazineWill hold 50mm - 90mm nailswith easy view quick load system.Contact nose5 stage depth adjustmentand anti slip contact.Subject tonormal termsandconditionsChoosing the correct nailTYPESmooth brightGalvanisedHot Dip GalvanisedEXPLANATIONGood for use on internal jobs wherethere is no or very little exposure tomoisture. Use on non permanentwork such as shuttering.The most popular as it gives goodprotection against corrosion and canbe used for most applications.Recommended for use on externalwork or where corrosion coulddamage the finish or integrityof the joint.Choosing the correct shankTYPESmoothRingUnilockEXPLANATIONThe most common nail, it can beused for most joints.Identified by the rings around theshaft, these nails are generally usedwhere a very strong joint is required.A cross between Smooth andRing types, for use where amedium strength joint is required.

Nail and fuel packs2,200 pcs includes 2 gas canisters3,300 pcs includes 3 gas canistersPART NUMBER DESCRIPTION QUANTITYNails Bright194764-7 Clipped Head 2.9 x 51 Ring Bright 3,300194772-8 Clipped Head 2.9 x 63 Ring Bright 3,300194776-0 Clipped Head 3.1 x 75 Ring Bright 2,200194767-1 Clipped Head 3.1 x 90 Smooth Bright 2,200Nails Galvanised194765-5 Clipped Head 2.9 x 51 Ring Galvanised 3,300194766-3 Clipped Head 2.9 x 57 Ring Galvanised 3,300194768-9 Clipped Head 2.9x63 Ring Galvanised 3,300194770-2 Clipped Head 3.1 x 63 Ring Galvanised 2,200194773-6 Clipped Head 3.1 x 75 Ring Galvanised 2,200194777-8 Clipped Head 3.1 x 90 Smooth Galvanised 2,200Nails Hot Dip Galvanised194769-7 Clipped Head 2.9 x 63 Ring Hot Dip Galvanised 3,300194771-0 Clipped Head 3.1 x 63 Ring Hot Dip Galvanised 2,200194774-4 Clipped Head 3.1 x 75 Ring Hot Dip Galvanised 2,200194775-2 Clipped Head 3.1 x 75 Unilock Hot Dip Galvanised 2,200194778-6 Clipped Head 3.1 x 90 Smooth Hot Dip Galvanised 2,200Job packs1,100 pcs includes 1 gas canisterPART NUMBER DESCRIPTION QUANTITYNail Bright194780-9 Clipped Head 2.9 x 51 Ring Bright 1,100194784-1 Clipped Head 2.9 x 63 Ring Bright 1,100Nails Galvanised194782-5 Clipped Head 2.9 x 51 Ring Galvanised 1,100194785-9 Clipped Head 2.9 x 63 Ring Galvanised 1,100194788-3 Clipped Head 3.1 x 63 Ring Galvanised 1,100194792-2 Clipped Head 3.1 x 75 Ring Galvanised 1,100194796-4 Clipped Head 3.1 x 90 Smooth Galvanised 1,100Nails Hot Dip Galvanised194783-3 Clipped Head 2.9 x 57 Ring Hot Dip Galvanised 1,100194786-7 Clipped Head 2.9 x 63 Ring Hot Dip Galvanised 1,100194790-6 Clipped Head 3.1 x 63 Ring Hot Dip Galvanised 1,100194793-0 Clipped Head 3.1 x 75 Ring Hot Dip Galvanised 1,100194797-2 Clipped Head 3.1 x 90 Smooth Hot Dip Galvanised 1,100Makita UKMichigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JDT: 01908 211678 F: 01908 211400Satisfying the professional’s needswww.makitauk.com98N315 0808