11.07.2015 Views

MT-120021 - Installation Instructions - MTI Wireless Edge Ltd.

MT-120021 - Installation Instructions - MTI Wireless Edge Ltd.

MT-120021 - Installation Instructions - MTI Wireless Edge Ltd.

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RD41425500C/REV-AWIRELESS EDGEINSTALLATION INSTRUCTIONSFOR<strong>MT</strong>-<strong>120021</strong> AND <strong>MT</strong>-<strong>120021</strong>/AItem: 1Pole bracketQty: 1Item: 2Pole bandQty: 4Item: 3Antenna basebracketQty: 2Item: 4 Item: 5 Item: Nut M5 6Washer flat M5 Washer spring M5 Qty: 8Qty: 8Qty: 8Item: 7Bolt M8x40Qty: 3Item: 8 Item: 9Washer flat M8 Washer spring M8Qty: 3Qty: 3Item: 10Nut M8Qty: 3Item: 11Bolt M10x50Qty: 1Item: 12Washer flat M10Qty: 1Item: 13Washer spring M10Qty: 1Item: 14Nut M10Qty: 1Item: 15Arm bracket 2Qty: 1SHEET 1 OF 6Item: 16Arm bracket 1Qty: 1Item: 17DialQty: 111 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, IsraelFax: 972-3-9025051, Tel: 972-3-9025050www.mtiwe.com


RD41425500C/REV-AWIRELESS EDGE1572218910141312B171611ASTEP 2Insert 2 bands, item 2 , into part 1 as shown.Do not fasten the bands.Connect bracket item 16 to clamp item 1 using hardwareItems 7, 8, 9 and 10. do not tighten the nut.Connect dial item 17 and bracket item 15, as shown,using hardware items 11, 12, 13 and 14 .Do not tighten the nut.SHEET 3 OF 611 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, IsraelFax: 972-3-9025051, Tel: 972-3-9025050www.mtiwe.com


RD41425500C/REV-AWIRELESS EDGE7 8 9 10315STEP 3Connect the module, assembled in step 2,with bracket item 15 to the top bracketitem 3 on the antenna, as shown, using hardwareitems 7, 8, 9 and 10.Do not tighten the nut.SHEET 4 OF 611 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, IsraelFax: 972-3-9025051, Tel: 972-3-9025050www.mtiwe.com


RD41425500C/REV-AWIRELESS EDGEPOLE132178910STEP 4Connect bracket item 1to pole using bands item 2.Use tightening torque of 7Nm.SHEET 5 OF 6STEP 5Connect bottom bracket item 3on antenna to bracket 1 on poleusing hardware items 7, 8, 9 and 10.Do not tighten the nut.Connect the top part of antennato pole by tightening the two bandsitems 2 around the pole.Use tightening torque of 7Nm11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, IsraelFax: 972-3-9025051, Tel: 972-3-9025050www.mtiwe.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!