Spray Equipment - Backpack Sprayers - Powell Equipment Parts

PUMPS & SPRAY EQUIPMENTPUMP & SPRAYER SECTIONPUMPS & SPRAY EQUIPMENT449

PUMPS & SPRAY EQUIPMENTBackpack SprayersSHURFLO 4 GALLONNEW!Farmate 4 GallonBackpack SprayerPUMPS & SPRAY EQUIPMENTNew! Shurflo's Propack RechargeableElectric Backpack Sprayer SRS-540Brand new from Shurflo, the SRS-540 offersbreakthrough performance, convenience, versatility,andcomfort in a backpack sprayer. Propackeliminates the need for the operator to continually"pump up" the sprayer to maintain a constant andsteady spray pattern as with manually poweredsprayers, making spraying much faster and easierthan ever.• Sprays up to 120 gallons (454 liters) on singlecharge high performance chemical resistantShurflo pump• Advanced microprocessor pump control• Variable speed and adjustable nozzle for lightor heavy duty spraying• Ultra comfortable ergonomic design, full backpad, and thickly padded shoulder harness• Unique Battery pack can be charged in place,or easily removed without tools for remotecharging• Four pump speeds can deliver delicate mist,high volume spray, or long-range stream tomeet any spraying need4 Gallon Polyethylene TankMAP No. SIZE710-2002 4 GallonMAP NO.710-1565452

PUMPS & SPRAY EQUIPMENTSolo Backpack SprayersSolo Backpack Sprayers Parts BreakdownSOLO BACKPACK SPRAYERSTHE MODEL 425 SOLO SPRAYER, WITH ITS CONNECTINGROD ACTUATED PISTON PUMP AND THE 475 SOLOSPRAYER, WITH IT'S DIAPHRAM PUMP, ARE CAPABLE OFPRODUCING A WIDE PRESSURE RANGE. (UP TO 90 PSI WITHTHE 425 AND UP TO 60 WITH THE 475) THEY ARE CAPABLEOF PERFORMING VIRTUALLY EVERY SPRAYING TASK.EASILY AND EFFECTIVELY HANDLES DISINFECTANTS,FERTILIZERS, HERBICIDES, PEST CONTROL ANDFORMULATIONS FOR TREE, SHRUB AND PLANTPROTECTION (CLEAN SPRAYER BETWEEN USE). THERUGGED HIGH DENSITY. POLYTHYLENE TANK ANDINTERNAL COMPONENTS WITH VITON SEALS PROVIDESLONG SERVICE AND DURABILITY.• LARGE OPENING WITH STRAINER• 4 GALLON TANK• 90 PSI PUMP (425)• 60 PSI PUMP (475)• REVERSIBLE PUMP LEVER• ADJUSTABLE PRESSURE CONTROL• PADDED COMFORTABLE STRAP• BUILT IN FILTER SCREEN• VARIETY OF NOZZLE TIPS AVAILABLEPART NO.709-2001709-2002DESCRIPTIONMODEL 425 WITH PISTON PUMPMODEL 475 WITH DIAPHRAGM PUMPSOLO BACKPACK PARTS BREAKDOWN1APUMPS & SPRAY EQUIPMENTSEE PARTS LISTING ON NEXT PAGE453

PUMPS & SPRAY EQUIPMENT425 Solo Backpack Parts ListingRepair Kit-Accessories425 SOLO BACKPACK PARTS LISTINGPUMPS & SPRAY EQUIPMENTITEM11A222345678910111213141516171819202122232425262728293031323334353637383940414243PART NO.709-2062709-2095709-2097709-2096PART NO.709-2065709-2141700-2206700-5001700-5103709-2093709-2092709-2091709-2089709-2090709-2060709-2061709-2087709-2100709-2058709-2086709-2056709-2055709-2053709-2085709-2083709-2082709-2081709-2080709-2079709-2076709-2126709-2099709-2075709-2074709-2073709-2072709-2057709-2068709-2067709-2066709-2063709-2064MFG. NO.40741484900258NTP8004D-2DC-2540742830062106407452700621154200215490023040743360610402407429540743354800170006225840745004074337006423444002404043123006213840612570062139006214044001680066394403139240742624400189407355840746774074409407440800121854800173407483340351110031356407441043003004074412420016640614584073179REPAIR KIT - ACCESSORIESMFG. NO.0610407K0610411K4900207Not AvailableDESCRIPTIONTip CapElbow Assembly KitUse Standard Tip Or Disc CoreD-2 Orifice DiscDC-25 Brass CoreNozzle ScreenO-RingElbowO-RingO-PlugSpray WandCapGun Rep. KitLever PinGun LeverShut-Off Assy.GasketClampCap ScrewDischarge HosePressure CylinderStop PlateO-RingValve PlateO-RingO-RingCylinder AssemblyLarge ClampPinLeverViton Collar UsePistonProtection CapCon. RodCon. Rod StudBoltLever W/GripStrap HookPump ShaftWasherBushingCarry Strap W/ HookStrap BuckleFilter BasketGasketTank LidDESCRIPTIONPiston Repair Kit(6, 20, 21, 22 28, 31, 32)Wand Repair Kit (1, 4, 6, 10, 14, 15, 16)Adjustable Cone Nozzle Brass4, 6, 14, 28, 42454

PUMPS & SPRAY EQUIPMENTHypro Roller Pumps w/Super Rollers4 ROLLERROLLER PUMPSWITH SUPER ROLLERSSERIES 4101 ROLLER PUMPS ARE DESIGNED FOR DIRECT DRIVE OR FOR BELT-AND-PULLEY DRIVE WITH EITHERELECTRIC MOTORS OR GAS ENGINES. OPERATES AT SPEEDS UP TO 2600 RPM. POLYPROPYLENE ROLLERSOUTPUT: 7GPM AT 2600 RPM 25 PSICAST IRON HYPRO PUMPS ARE USED FORMAXIMUM PRESSURE: 150 PSIPUMPING LARGE QUANTITIES OF WATER, WEEDSHAFT: 5/8"CONTROL CHEMICALS, PEST CONTROL CHEMI-PORTS: 3/4" NPTCALS, FUMIGANTS, ETC.PART NO. MATERIAL WEIGHT712-478 CAST 5 LBS.6 ROLLER4101CSERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM.OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROLCHEMICALS, FUMIGANTS, ETC.PART NO. MATERIAL WEIGHT712-376 CAST 9 LBS.6 ROLLER REVERSE ROTATION PUMPSERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM. OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5REVERSE ROTATION ROLLER PUMPPART NO. MATERIAL WEIGHT712-379 CAST 9 LBS.7 ROLLER6500CT3CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROL CHEMI-CALS, FUMIGANTS, ETC.6500CRSERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3PART NO. MATERIAL WEIGHT712-451 CAST 14 LBS.7 ROLLER REVERSE ROTATION PUMPCAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.7700CT3SERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3CAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.PUMPS & SPRAY EQUIPMENTPART NO. MATERIAL WEIGHT712-453 CAST 14 LBS.SEE PARTS LIST ON NEXT PAGE7700CR455

PUMPS & SPRAY EQUIPMENTHypro Roller PumpsHypro Roller Pump RepairsPUMPS & SPRAY EQUIPMENT8 ROLLERROLLER PUMPSSERIES 7560 EIGHT-ROLLER PUMP, WITH SCOOPLESS ROTOR AND IMPROVED PERFORMANCE AT ALL SPRAYINGPRESSURES, HAS LONG BEEN PREFERRED BY MANY MANUFACTURERS OF FIELD SPRAYERS. USABLE AT SPEEDSUP TO 1000 RPM.CAST IRON HYPRO PUMPS ARE USED FOR PUMPING LARGEOUTPUT: 11.4 GPM AT 540 RPM, 50 PSI, QUANTITIES OF WATER, WEED CONTROL CHEMICALS, PEST CON-22 GPM AT 1000 RPM, 50 PSI. TROL CHEMICALS, FUMIGANTS, ETC.NI-RESIST IS A HIGH NICKELMAXIMUM PRESSURE:300 PSICONTENT ALLOY FOR BETTER CORROSION RESISTANCE TO PUMPSHAFT: 15/16"CHEMICALS SUCH AS LIQUID FERTILIZERS.SILVER SERIES HAS APORTS: 3/4" NPTCUSTOM ALLOY THAT PROVIDES THE BEST CORROSION RESIS-HORSEPOWER: .25 TO 6TANCE FOR UP TO 10 TIMES LONGER LIFE THAN STANDARD CASTIRON PUMPS AND IS READY FOR ROUNDUP.PART NO. MFG. NO. MATERIAL WEIGHT712-401 7560CT3 CAST 14 LBS.712-402 7560CT3 NI-RESIST 14 LBS.712-415 7560XL SILVER CAST 13 LBS.7560CT38 ROLLER REVERSE ROTATION PUMPSERIES 7560 EIGHT-ROLLER PUMP, WITH SCOOPLESS ROTOR AND IMPROVED PERFORMANCE AT ALL SPRAYINGPRESSURES, HAS LONG BEEN PREFERRED BY MANY MANUFACTURERS OF FIELD SPRAYERS. USABLE AT SPEEDSUP TO 1000 RPM. OUTPUT: 11.4 GPM AT 540 RPM, 50 PSI, 22 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .25 TO 6REVERSE ROTATION ROLLER PUMPPART NO. MATERIAL WEIGHT712-406 Cast 14LBS.PART NO.712-1231712-1232712-1001712-1004712-1714712-1728712-2101712-2102712-2103712-2001712-2004712-3401712-3403712-3409712-3423712-3411712-3421712-3422712-3434CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER,WEED CONTROL CHEMICALS, PEST CONTROLCHEMICALS, FUMIGANTS, ETC.7560CRHYPRO ROLLER PUMP REPAIRSHYPRO NO.SHAFTS0550-66000550-7400ROLLERS1002-0004 Polly Rollers1005-0004 Super RollerO-RING GASKETS1720-00141720-0008SHAFT SEALS2102-0001 Rubber2112-0001 Rubber2112-0003 VitonSEALED BEARINGS2008-00012000-0004REPAIR KITS (with Rollers & O-Ring)3430-03753430-03763430-03853430-01553430-03903430-03803430-01673430-0384PUMP MODEL4101, 65007560, 77006500, 7560, 77006500, 7560, 77007560, 770065004101, 65007560, 77007560, 77007560, 77004101, 65006500 Series7560 Series7700 Series7700 SeriesREPAIR KITS (with Rollers, O-Ring & Viton Shaft Seals)4001, 4101 Series6500 Series7560 Series7700 Series456

PUMPS & SPRAY EQUIPMENTHypro Piston & Plunger PumpsHypro Repair PartsSERIES 5200 BIG TWIN PUMPPISTON & PLUNGER PUMPSOUTPUT TO 10 GPM - PRESSURES TO 400 PSI - SPEEDS TO 600 RPM.Series 5200 two-cylinder pumps are similar in design to the series 5300. They have the volumeand high pressure needed for efficient spraying or cleaning operations - equipmentcleaning, animal pen washing, cattle spraying, orchard spraying - and are built to handle awide range of suspensions and solutions - wettable powder slurries, insecticides, oil, water,and detergent solutions. Maximum 800 RPM, 10 GPM, 400 PSI.Shaft: Choice of a 1-3/8" hollow shaft for direct mounting on a tractor pto shaft, or a 1"solid shaft for belt and pulley or flexible coupling drive. Ports: 3/4" NPT.PART NO.712-130712-132MFG NO.5210C5210C-HSHAFT1" Solid1 3/8" HollowWEIGHT18 lbs.18 lbs.SERIES 5300 SMALL TWIN PUMPEconomical 2-cylinder pump for pressure up to 500 PSI. 3 gpm output with leather piston cups.Pump has solid stainless steel 5/8" shaft, factory-lubricated ball bearings for main shaft, needlebearings on the crank pin; unitized stainless steel valves, 1/2" NPT ports. Maximum 1800 RPM.PART NO.712-195MFG NO.5330CXSERIES 5300 PLUNGER PUMPSHAFT5/8" SolidSHAFT5/8" Solid5/8" HollowWEIGHT10 lbs.Designed for high pressure spraying. This model includes a steel base with a mounting height that fitsa 56 frame motor. It can be direct driven at motor speeds (up to 1800 RPM) and requires only 1.5 HPto produce a maximumPressure of 1000 PSI and 2.2 GPM.1/2" NPT female ports. Shipping weight 10 lbsPART NO.712-190712-191PART NO.712-5302712-5301712-3408712-5201712-5202712-3410712-3407712-5307712-1401PART NO.712-5308MFG NO.5321C5321C-HWEIGHt10 lbs.10 lbs.HYPRO REPAIR PARTSRepair Parts for Hypro Piston PumpsHYPRO NO.3430-00093430-01973430-00373430-00393430-01893430-00383430-00073400-00731440-0005HYPRO NO.3430-0144PUMP SERIES533053305210521052105210530053005200Repair Parts for Hypro Plunger PumpsPUMP SERIES5321DESCRIPTIONPiston Stack Parts Rubber Cup KitValve AssemblyPiston Stack Parts Leather Cup KitPiston Stack Parts Fabric Cup KitPiston Stack Parts Buna-A Cup KitValve AssemblyRepair KitValve Set AssemblyPiston GuideDESCRIPTIONPlunger Stack Parts KitPUMPS & SPRAY EQUIPMENTSEE FOLLOWING PAGES FOR COMPLETE PARTS LISTING AND BREAKDOWNS.457

PUMPS & SPRAY EQUIPMENTRepair Parts for Hypro Model 5210REPAIR PARTS FOR HYPRO MODEL 5210PUMPS & SPRAY EQUIPMENT458

PUMPS & SPRAY EQUIPMENTRepair Parts for Hypro Model 5330REPAIR PARTS FOR HYPRO MODEL 5330PUMPS & SPRAY EQUIPMENT459

PUMPS & SPRAY EQUIPMENTRepair Parts for Hypro Model 5321REPAIR PARTS FOR HYPRO MODEL 5321PUMPS & SPRAY EQUIPMENT460

PUMPS & SPRAY EQUIPMENTHypro Series 9400 Belt Drive PumpsRepair Parts for Hypro 9400 Series PumpSERIES 9400 BELT DRIVE PUMPSOUTPUT TO 76 GPM - PRESSURE TO 70 PSI-SPEEDTO 1000 RPM - TEMPERATURE TO 140° F.EASY TO MOUNT ON TRACTOR OR TRAILER,SERIES 9400 DELIVERS DEPENDABLE HIGHVOLUME AT A LOW PRICE. EASY TO ADJUST ANDMAINTAIN.CONSTRUCTION: EPOXY-COATEDCAST-IRON HOUSING WITH STAINLESS STEELWEAR RING, MAKING THE PUMP"Ready for Round-Up". IT HAS A 3/16 STAINLESSSTEEL SHAFT, BALANCED GLASSFILLED NYLONIMPELLER. SINGLE, POSITIVE TIMING BELT ISADJUSTED OR REPLACED BY LOOSENING ONEBOLT; NO NEED TO DISTURB THE PTOATTACHMENT. BELT-GUARD ASSEMBLY ISMOLDED FROM HIGH IMPACT, LONG LASTINGGLASS REINFORCED POLYETHENE.FACTORY-LUBRICATED BALL BEARINGS. VITONSHAFT SEAL STANDARD; BUNA-N OPTIONAL"Ready for Round-Up"600 RPM DRIVE9402C-540: 1 3/8" PTO, 6 SPLINESHAFT FOR600 RPM66 GPM AT 40 PSIPART NO.712-6791000 RPM DRIVE9402C-1000: 1 3/8" PTO, 21 SPLINESHAFT FOR1000 RPM75 GPM AT 40 PSIPART NO.712-680Repair Parts for Hypro 9400 Series PumpPART NO.712-2106712-3101712-3102712-3106712-3105HYPRO NO.2120-00093103-00093103-00103100-00063100-0005DESCRIPTIONViton Pump SealBelt for 600 RPM 9401C-B1Belt for 1000 RPM 9401C-B2V-Belt for 540 RPM 9402V-Belt for 1000 RPM 9402SEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING AND BREAKDOWNS.You can find all these itemsand more on our web site:www.modernusa.comPUMPS & SPRAY EQUIPMENTMake Modern Ag PartsYour #1 choice!461

PUMPS & SPRAY EQUIPMENTRepair Parts for Hypro Model 9400REPAIR PARTS FOR HYPRO MODEL 9400PUMPS & SPRAY EQUIPMENT462

PUMPS & SPRAY EQUIPMENTParts Breakdown for 712-601, 602PARTS BREAKDOWN FOR 712-601, 602HYPRO CAST IRON CENTRIFUGAL PUMPSSHAFT ASSEMBLY 1000 RPMSHAFT ASSEMBLY 540 RPMPUMPS & SPRAY EQUIPMENTCATNO.QNTY.REQ'D.41111111411*11336333**1111REF.NO.123455678911121314151617181919A202121A2223MFGNO.2406-00070150-9000C2253-00010400-9000P2120-00102120-00111720-00830752-9000C2210-00201700-01012130-00181810-00132008-00011820-00252210-00462270-00032265-00032007-00223900-00393900-00401610-00123900-00100500-90023900-00131810-0011DESCRIPTIONDrain PlugPump CasingImpeller NutImpeller (Nylon)Mechanical Seal (Optional Buna-N)Mechanical Seal (Standard Viton)O-ringMounting Flange AdapterHex Head CapscrewGasketBearing Lip SealRetaining Ring - (1) required for 540 rpm(2) for 1 3/8" and (3) for 1 3/4" 1000rpmBall BearingRetaining RingCapscewWasherThrust WasherBearing Inner RaceDriver Gear w/Bearing (540 rpm)Driver Gear w/Bearing (1000 rpm)Woodruff Key**(1) req'd for 540 rpm(2) req'd for 1000 rpm modelsImpeller Shaft/Pinion Gear (540 rpm)Impeller Shaft (1000 rpm)Sun Gear (1000 rpm)Retaining Ring (1000 rpm)CATNO.QNTY.REQ'D.111111111111118411113111111REF.NO.2424A252626A2728293031323334353637383940414344454647PARTNO.0562-9000D0562-9002D3430-01760501-9016D0501-9018D0610-00052220-00352403-00120501-9018D11800-00142005-00022102-00251810-00013900-00091450-00042210-00260754-9000C0550-1322F43430-01902404-01932406-00191700-00981720-01391720-00221520-00346031-0318DESCRIPTIONDriver Hub (models 9000C, 9006C)Driver Hub (models 9002C, 9008C)Locking Collar Kit (Hollow ShaftOnly)Driver Hub (models 9010C, 9016C)Driver Hub (models 9012C and 9018C)KeyCapscrew (9022C, 9028C)Bushing (models 9022C, 9028C)Driver Hub (models 9022C, 9028C)Retaining RingBall BearingOil SealRetaining RingRing GearCushion BumperHex Head CapscrewGear CasingDriver Hub (9022C, 9028C)Locking Collar Kit (9022C, 9028C)Breather VentOil PlugGasketO-ringO-ringMounting ClipNameplate (not shown)WARNING Tag (not shown)SEAL, O-RING REPAIR KIT NO. 3430-0333 CONSISTS OF (1) REF. 5 MECHANICAL SEAL, (1) REF. 6 O-RING, AND(1) REF. 9 GASKET. GEAR LUBE REQUIREMENT: PHILLUBE SAE 80W90 OIL.464

PUMPS & SPRAY EQUIPMENTHypro Series 9600C Turbine PumpRepair Parts for Hypro Turbine Pump Model 9600CRepair Parts for Hypro Series 9600C Turbine PumpHYPRO SERIES 9600C TURBINE PUMP9600C1000 RPM PTO DRIVE. THE 9600C TURBINE PUMPIS FOR HIGH VOLUME SPRAYING. FEATURESINCLUDE: HEAVY DUTY CAST IRON BODY, GLASSFILLED VALOX IMPELLER, STAINLESS STEELSHAFT, VITON SEALS, AND HEAVY DUTY SEALEDBEARINGS. AT 1200 RPM AND 40 PSI THE PUMPDELIVERS 73 GPM.SHAFT SIZE: 15/16" WITH 1/4" KEYWAYPORT SIZE: 1 1/2"PART NO.712-696REPAIR PARTS FOR HYPRO TURBINE PUMP MODEL 9600CPART NO.712-2001712-2103712-3425HYPRO NO.2008-00012112-0003 Viton3430-0347DESCRIPTIONSealed BearingShaft SealSeal Kit Contains: 1) 1710-0015 Gasket2) 2112-0003 Viton SealsREPAIR PARTS FOR HYPRO SERIES 9600C TURBINE PUMPREF. NO.123456789101112131415Qty.111111131221611PART NO.0050-9600 C0250-9600 C1201-00150500-96000400-9600P1610-00451710-00151810-00081820-00252008-00012112-00032300-00202210-00262406-00076031-0258DESCRIPTIONBodyHousingImpeller InsertShaft, Stainless Stell, 15/16" Diameter,1/4" KeywayImpeller, Corrosion Resistant Valox ®Key-WoodruffGasketRetainer Ring - ExternalRetainer Ring - InternalSealed Ball BearingSeal - VitonBearing CoverScrew, Hex HeadPipe PlugDecalPUMPS & SPRAY EQUIPMENT465

PUMPS & SPRAY EQUIPMENTHypro Hydraulic Drive PumpHYPRO HYDRAULIC DRIVE PUMPHypro centrifugal pumps are designed for agricultural and industrial spraying and transfer ofa variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers,etc. Polypropylene centrifugal pumps can also be used to pump acid fertilizer, calciumchloride and other highly corrosive liquids such as sulfuric and phosphoric acids. HyproSeries 9300 hydraulic motor driven centrifugal pumps provide smooth performance. Theycan be conveniently mounted on the tractor or sprayer, becoming part of the vehicle'shydraulic system and freeing the PTO for other uses. The Hypro "close coupled" designreduces the mounting space required, eliminating long shafts and couplers between thepump and motor.PUMPS & SPRAY EQUIPMENT• Stainless Steal Wear Ring "Ready for Round-Up" Standard• Cast Iron Hydraulic Motor- Hypro Makes it's Own Hydraulic Motors• Double Lip Teflon Seal in Motor- Able to Absorb Hydraulic Shock• One Piece Friction Welded Stainless Steel Shaft Standard- 316 Stainless Shaft in the Pump- 416 Stainless Shaft in the Motor• Balanced, Glass-filled Nylon Impeller Standard- Corrosion Resistant• Viton Seal Standard• Easy Hook-Ups with No Relief Valves• OEM Standard on Most Sprayers• Flows to 190 gpm• Pressures to 190 psi7 gpm hydraulic motor/cast iron pump, closed/open centersystem, ports (NPT): 1-1/2" inlet, 1-1/4" outlet.PART NO. MATERIAL OEM#712-690 Cast 9303C-HM4SEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING AND BREAKDOWNS.Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and shipped it to youthe same day.Your Satisfaction is Guaranteed!466

PUMPS & SPRAY EQUIPMENTRepair Parts for Hypro Hydraulic Drive PumpREPAIR PARTS FOR HYPRO HYDRAULIC DRIVE PUMPPUMPS & SPRAY EQUIPMENT467

PUMPS & SPRAY EQUIPMENTHypro Pump CouplersMOUNTS TO PUMP SHAFT AND PTOSHAFT WITH FLUSH ALLEN HEADSETSCREWS.PART NO.712-1322712-1333712-1353712-1338SLIPS PUMP ON AND OFF PTO SHAFT IN SECONDS WITH NO TOOLSREQUIRED. SAFE, CONVENIENT AND SECURE. NO PROTRUDING PINSOR BOLTS TO CATCH HANDS OR CLOTHING.PART NO.712-1306712-1307712-1308712-1309HYPRO PUMP COUPLERSSPLINE1-3/8" X 61-3/8" X 61-3/8" X 211-3/8" X 21SPLINE1-3/8" X 61-3/8" X 61-3/8" X 211-3/8" X 21FORGED STEEL PUMP ADAPTERSMOUNTS TO PUMP SHAFT ANDPTO SHAFT WITH FLUSH ALLENHEAD SETSCREWS.STANDARD ADAPTERSSHAFT SIZE5/8"15/16"5/8"15/16"SHAFT SIZE5/8"15/16"5/8"15/16"MFG. NO.1320-00221320-00331320-00531320-0038QUICK COUPLER ADAPTERSMFG. NO.1321-00061321-00071321-00081321-0009PUMPS & SPRAY EQUIPMENTPART NO.712-1370712-1372712-1374712-1375SPLINE1-3/8" X 61-3/8" X 211-3/4" X 201-3/8" X 6SHAFT SIZE15/16"15/16"15/16"1"MFG. NO.1320-00761320-00781320-00801320-0081FLEXIBLE COUPLINGS (LOVE JOY COUPLINGS)FOR USE WITH GASOLINE ENGINES AND ELECTRIC MOTORS UP TO TWO HORSEPOWERCOUPLING END CENTER COUPLING END DISCPART NO.712-2702712-2703712-2701DESCRIPTION1/2" Coupling End 1/8" Key5/8" Coupling End 3/16" KeyCenter Disc468MFG. NO.2738-00012738-00022738-0001

PUMPS & SPRAY EQUIPMENTAce Hydraulic Motor Driven Pumps-Models 204 and 210HYDRAULIC MOTORDRIVEN PUMPSMODELS 204 AND 2101 1 / 4 " SUCTION X 1" DISCHARGESHUT-OFF0 GPM100 PSI80 PSI60 PSI15GPM95 PSI75 PSI55 PSI30GPM83 PSI70 PSI50 PSI45GPM55 PSI45 PSI35 PSI60GPM30 PSI25 PSI15 PSI75GPM10 PSI5 PSI- -MAXIMUM PRESSURE: 100 PSIMAXIMUM FLOW: 75 GPM• THE ORIGINAL FARM AND INDUSTRY STANDARD. OVER 250,000 IN USE SINCE 1969.• THE 204 MOTOR REQUIRES 4 GPM HYDRAULIC FLUID INPUT.RECOMMENDED FOR:-JOHN DEERE TYPE PRESSURE COMPENSATING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 4 TO 13 GPM.• THE 210 MOTOR REQUIRES 8 GPM HYDRAULIC FLUID INPUT.RECOMMENDED FOR:-CASE-IH TYPE LOAD SENSING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 8 TO 17 GPM.PART NO.711-1101711-1107711-1102711-1108PART NO.711-1407711-4371711-1106711-4370711-4375MFG. NO. / DESCRIPTIONFMC - HYD - 204 PUMPFMC - HYD - 204 CI PUMP WITH CAST IRON IMPELLERFMC - HYD - 210 PUMPFMC - HYD - 210 CI PUMP WITH CAST IRON IMPELLERREPAIR KITS FOR 204 AND 210MFG. NO.DESCRIPTIONRK-FMC - 52700 REPAIR KIT FOR PUMP ONLYRK-BAC - 75 - HYD HYDRAULIC MOTOR 204/210 REPAIR KITFMC-HYD-POPUMP ONLYBAC-75-HYD-204 204 HYDRAULIC MOTORBAC-75-HYD-210 210 HYDRAULIC MOTORSEE COMPLETE PARTS BREAKDOWN ON FOLLOWING PAGES.PUMPS & SPRAY EQUIPMENT469

PUMPS & SPRAY EQUIPMENTCentrifugal/Hydraulic Motor Combinations Parts ListCENTRIFUGAL PUMP/HYDRAULIC MOTOR COMBINATIONS PARTS LISTMODELS FMC-HYD-204, FMC-HYD-210 & FMC-HYD-310WITH MECHANICAL SEAL, 1 1/4" X 1" SERIESPARTS LISTING CONTINUED NEXT PAGEPUMPS & SPRAY EQUIPMENTPART NO.711-3010711-3060711-3061711-3110711-3151711-3160711-3250711-4005711-3300711-3391711-3400711-3420711-3440711-3442711-3790711-3810711-3870711-4130711-4370711-4375711-4380711-4390711-4400711-4410711-5010711-5030REF.NO.12233#4-556789910111213141415151617171718181819############MFG.NO.*BAC-4BAC-6-HYDBAC-6-HYD-SSBAC-7B*BAC-7V*40160BAC-12BAC-12ABAC-14-HYDBAC-14-HYD-310BACH-23-SSBAC-24-HYD-SSBACH-25BAC-26-HYDBAC-26-HYD-CIBAC-32BAC-32SBAC-33BAC-3740950409304111041120BAC-54412564125741330BAC-75-HYD-204BAC-75-HYD-210BAC-75-HYD-310BAC-76-HYDBAC-79-204-3/8"NPTBAC-79-204-1/2"NPTBAC-79-204-3/4"ORBBAC-79-210-3/8"NPTBAC-79-210-1/2"NPTBAC-79-210-3/4"ORBBAC-80-HYD-1/2"NPTBAC-80-HYD-3/4"ORBBAC-80-HYD-7/8"ORB402104203042040EDPNO.40010400604006140110401514016040250400054030040301403904040040420404404044240790407954081040870409504093041110411204113041256412574133041370413754137841380413904140041410413954140541415414204143041440420104203042040DESCRIPTIONGasket, 4 Hole5/8" Driven Shaft W/Tang Slot5/8" Driven Shaft W/Tang Slot, Stainless SteelBuna N. Mechanical Seal (Optional)Viton Mechanical Seal“O” Ring For Bac-6-Hyd Shaft1 1/4" X 1" Volute"O" Ring for for Bac-14 VoluteMounting FrameMounting Frame, For Bac-75-Hyd-310 Hydraulic Motor3/8" N.F. Hex Nut, Stainless Steel3/8" Washer, Stainless Steel1/8" X 1/8" X 1/2" Impeller KeyImpeller, Valox, W/KeywayImpeller, Cast Iron, W/Keyway (Optional)External Snap Ring, Bac-6-Hyd Driven ShaftSpacer For Bac-6-Hyd ShaftInternal Snap Ring, Bac-14-Hyd Mounting FrameSealed Ball Bearing, Bac-6-Hyd Driven Shaft3/8" N.C. X 3/4" Hex Head Cap Screw3/8" N.C. X 3/4" Hex Head Cap Screw, Stainless Steel (Optional)1/8" Npt Pipe Plug1/8" Npt Pipe Plug, Stainless Steel (Optional)Slinger5/16" N.C. X 3 1/2" Hex Head Cap Screw Motor To Pump (For Fmc-Hyd-204)5/16" N.C. X 4" Hex Head Cap Screw Motor To Pump ( For Fmc-Hyd-210)5/16" N.C. X 3/4" Hex Head Cap Screw Motor To Pump ( For Fmc-Hyd-310)Hydraulic Motor For Open Center Or Closed Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-204)Hydraulic Motor For Open Center Or Closed Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-210)Hydraulic Motor For Open Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-310)Coupling For Hydraulic MotorRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/8" Npt FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 1/2" Npt Female (Opt.)Restricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/8" Npt FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 1/2" Npt Female (Opt.)Restricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal Female (Optional)3/8" Npt Male X 1/2" Npt Female Adapter ( Optional)3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal Female Adapter ( Optional)3/8" Npt Male X 7/8" -14 Nf “O” Ring Seal Female Adapter (Optional)Needle Valve Adjusting Screw3/8" Nc Thread SealFlat Steel Back-Up WasherREQ.1111111111111112122443314441111111111111111470

PUMPS & SPRAY EQUIPMENTHydraulic Motor Parts ListHYDRAULIC MOTOR PARTS LISTREF. #1234567891011121314*15*16*17*181920212223242526272829*3031323334*MODEL - 20441720417314174041750417614177041780417904180041810418204183041840418504186041870418804189041900419204194141950419614197041980419904201040960420304204042041420424204342044MODEL - 20641721417314174041751417644177041780417904180541810418204183041840418504186041870418804189041900419214194141950419614197141980419904201040960420304204042041420424204342044MODEL - 21041725417314174041755417664177041780417904180541810418204183041840418504186041870418804189041905419254194141950419614197541980419904201040960420304204042041420424204342044DESCRIPTIONHousingDrive PlateEnd PlateGearStraight drive shaftSteel seal retainerSpring for reverse flow checkCheck valve capDowel pin for housingSteel backup washerNylon washerWire ring bearing spacerQuad ring shaft seal collar"O" Ring, housing seal"O" Ring, seal retainer"O" Ring, seal collarQuad ring shaft sealShaft seal retaining ring1/4"N.C. Hex head cap screwDowel Pin for drive shaftSnap ringBallBall Bearing 7/16"1 D.Idler ShaftRetaining ringBall for idler shaftNeedle valve adjusting screw3/8" N.C. Jam nut#7500 3/8" N.C. Thread sealFlat steel back-up washerSeal check capSpring for seal checkBall for seal check"O" Ring for seal check capREQ.1112111121111211112121112111111111PUMPS & SPRAY EQUIPMENT471

PUMPS & SPRAY EQUIPMENTHigh Performance Hydraulic Motor Driven Pump Model 206Parts Breakdown for 711-1104HIGH PERFORMANCE HYDRAULIC MOTOR DRIVEN PUMP150 SERIESHIGH PERFORMANCEMODEL 2061 1 / 2 " SUCTION X 1 1 / 4 " DISCHARGEHIGH PERFORMANCE PUMP - 100 PSI AT 20 GPM.PROVIDES HIGHER PRESSURE AND GREATER VOLUME FOR APPLICATIONSWITH LARGE TANKS AND LONG BOOMS.THE 206 MOTOR REQUIRES 7 GPM HYDRAULIC FLUID INPUT AND FITSVIRTUALLY ALL TRACTOR HYDRAULIC SYSTEMS.VITON MECHANICAL SEAL.RECOMMENDED FOR THE FOLLOWING HYDRAULIC SYSTEMS:-JOHN DEERE TYPE PRESSURE COMPENSATING CLOSED CENTERSYSTEMS.-CASE-IH TYPE LOAD SENSING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 7 TO 16 GPM.SHUT-OFF0 GPM120 GPM100 PSI80 PSI60 PSI20GPM100 PSI95 PSI75 PSI55 PSI40GPM80 PSI76 PSI62 PSI50 PSI60GPM60 PSI52 PSI45 PSI25 PSI80GPM30 PSI26 PSI21 PSI5 PSI100GPM10 PSI5 PSI- -- -PART NO.711-1104711-4371711-1425MFG. NO. / DESCRIPTIONFMC-150-HYD - 206 PUMPREPAIR KITSRKBAC-75-HYD ALL SEALS AND O-RINGS FOR MOTORRK-FMC-52710 REPAIR KIT FOR 206 PUMPPARTS BREAKDOWN FOR 711-1104CENTRIFUGAL PUMP/HYDRAULIC MOTORCOMBINATION PARTS LIST MODEL FMC-150-HYD-206PUMPS & SPRAY EQUIPMENTREF.NO.*122#*3#*#4567891011121313141415161718MFG.NO.BAC -4- 150BAC-6-HYDBAC-6-HYD-SSBAC-7BBAC-7VBAC-7SC40160BAC-12-150BAC-14-150-HYDBACH-23-SSBAC-24-HYD-SSBAC H -25BAC-26-150BAC -32BAC -33BAC-3740950409304111041120BAC-5441258BAC-75-HYD-206BAC-76-HYDEDPNO.400154006040061401104015140152401604025540305403914040040420104454079040810408704095040930411104112041130412584137241380DESCRIPTION150 SERIESHIGH PERFORMANCEO" Ring, volute5 /8 " Driven shaft with tang slot5 /8 " Driven shaft with tang slot. stainless steel (optional)Buna-N mechanical seal (optional)Viton mechanical seal (includes 40160 "O'' ring)Silicon carbide mechanical seal (includes 40160 "O'' ring) (optional)"O" Ring for BAC-6-HYD shaft1 1 / 2 " X 1 1 / 4 " VoluteMounting frame3 /8 " N.F. Hex nut, stainless steel3 /8 " Lock washer, stainless steel1 /8 " X 1 / 8 " X 1 / 2 " Impeller keyImpeller, w/keywayExternal snap ring, BAC-6-HYD driven shaftInternal snap ring, BAC-14-HYD-150 mounting frameSealed ball bearing, BAC-6-HYD driven shaft3 /8 " N.C. X 3 / 4 " Hex head cap screw3 /8 " N C. X 3 / 4 " Hex head cap screw, stainless steel (optional)1 /8 " NPT Pipe plug1 /8 " NPT Pipe plug, stainless steel (optional)Slinger5 /16 " N.C X 3 3 / 4 " Hex head cap screw motor to pump (for FMC-150-HYD-206)Hydraulic motor for open-center or closed-center systems wlth integral needlevalve (for Model FMC-150-HYD-206)Coupling for hydraulic motor* Items Included In 711-1425 repalr kit. # Not shown on cross section drawlngREQ.11111111111122244331411PARTNO.711-3015711-3060711-3061711-3110711-3151711-3160711-3391711-3400711-3420711-3990711-3810711-4130711-4380472

PUMPS & SPRAY EQUIPMENTBelt Driven PumpsBELT DRIVEN PUMPS★★★★★★★★The original farm belt drive standard.Over 325,000 in use since 1964.Time proven design.Wide spread parts and service availability.Most economical belt drive.0-70 PSI. 1 1 / 4 " Suction X 1" Discharge.Sealed bearings, Mechanical viton seals.Saftey shield included.Pressure10 PSI30 PSI50 PSI90 PSI (1)100 PSI (1)TRACTORPTO SPEEDPSI203040506070PTOC - 600450 500RPM RPMGPM GPM50 5344 5030 4022540RPMGPM5752483715600RPMGPM656362604625Capacity75 GPM 4,500 GPH60 GPM 3,600 GPH50 GPM3,000 GPH20 GPM 1,200 GPH10 GPM 600 GPHTRACTORPTO SPEEDPSI2030405060701-1/4" X 1" SERIESModels FMC-HYD-204, FMC-HYD-210, FMCL-HYD-204, FMCL-HYD-210PART NO.711-1001711-1007711-1008711-1055PART NO.711-1401711-14021 1 / 4 " SUCTION X 1" DISCHARGEMFG. NO.PTOC-600-6PTOC-1000-10-21PTOC-1000-20FMC - MIAREPAIR KITSRK-PTOC-600-10RK-PTOC-1000-10PTOC - 1000700 800RPM RPMGPM GPM44 5038 4724 3719900RPMGPM57524837151000RPMGPM656362604625Model FMCH-HYD-210PressureCapacity10 PSI 60 GPM 3,600 GPH30 PSI 60 GPM 3,600 GPH50 PSI 60 GPM90 PSI100 PSI3,600 GPH40 GPM 2,400 GPH20 GPM 1,200 GPHDESCRIPTION6-SPLINE PUMP21-SPLINE PUMP20-SPLINE PUMPREPLACEMENT PUMP UNIT ONLYDESCRIPTIONFOR 1 3 / 8 "-6-SPLINE PUMPFOR 1 3 / 8 "-21-SPLINE PUMPFOR 1 3 / 4 "-20-SPLINE PUMPPUMPS & SPRAY EQUIPMENTREPAIR KITS CONTAIN BELT, VITON SEAL, GASKET, AND O-RINGSEE PARTS BREAKDOWN ON NEXT PAGE.473

PUMPS & SPRAY EQUIPMENTParts Lists-Model PTOC Centrifugal PumpPARTS LISTMODEL PTOC CENTRIFUGALPUMP WITH MECHANICALSEAL TRACTOR PTOMOUNTED, BELT DRIVENPUMPS & SPRAY EQUIPMENTPART NO.711-3010711-3030711-3050711-3070711-3110711-3151711-3160711-3220711-3235711-3250711-4005711-3270711-3340711-3430711-3432REF. #12334445678910111213--1415161717MFG NO.#* BAC-4BAC-5BAC-6BAC-6-SSBAC-7B#*BAC-7V#*40160BAC-10-6SPBAC-10-6SP-QCBAC-10-21SPBAC-10-175-20SPBAC-10-SBAC-11BAC-11-175BAC-11-1BAC-12BAC-12ABAC-13BAC-14-MIABAC-15BAC-15-A-6SPBAC-15-A-QCBAC-15-A-MBAC-15-A-175BAC-15-BBAC-26BAC-26-CIEDP NO.400104003040050400704011040151401604020040210402204018040190402354023640237402504000540270402904034040350403524036040353403704043040432DESCRIPTIONGASKET, 4 HOLEIDLER TORSION SPRING5/8" DRIVEN SHAFT, LEFT HAND THREAD5/8" DRIVEN SHAFT, LEFT HAND THREAD, STAINLESS STEELBUNA N MECHANICAL SEAL (OPTIONAL)VITON MECHANICAL SEAL"O" RING FOR BAC-6 SHAFT1 3/8" 6 TOOTH SPLINE PTO DRIVE SHAFT ( FOR PTOC-600-10-6SP)1 3/8" 6 TOOTH SPLINE PTO DRIVE SHAFT FOR QUICK COUPLER(FOR PTOC-600-10-QC)1 3/8" 21 TOOTH SPLINE PTO DRIVE SHAFT, INCLUDES BAC-11(FOR PTOC-1000-10-21SP)1 3/4" 20 TOOTH SPLINE PTO DRIVE SHAFT, INCLUDES BAC-11-175(FOR PTOC-1000-175-20SP)1" TUMBLEROD STUB DRIVE SHAFT (FOR PTOC-600-10B)SPLIT RING, LOCKING COLLAR ( FOR BAC-10-21SP SHAFT)SPLIT RING, LOCKING COLLAR ( FOR BAC-10-175 SHAFT)SET SCREW ( FOR BAC-11- AND BAC-11-175 LOCKING COLLAR)1 1/4" X 1" VOLUTE"O" RING FOR BAC-12 VOLUTEIDLER ARMMOUNTING FRAME, MACHINED FOR IDLER ARMPTO DRIVE SHAFT BEARING HOUSING(FOR PTO MOUNTED MODELS)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY WITH 6 SPLINE SHAFTPTO DRIVE SHAFT BEARING ASSEMBLY ( FOR PTOC-600-10-QC)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY(FOR PTOC-1000-10-21SP)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY(FOR PTOC-1000-175-20 SP)TUMBLEROD DRIVE SHAFT BEARING HOUSING W/MOUNTING BASE(FOR PTOC-600-10B)IMPELLER, VALOX, LEFT HAND THREADIMPELLER, CAST IRON, LEFT HAND THREAD ( OPTIONAL )REQ.111111111111111111111111111* ITEMS INCLUDED IN REPAIR KIT FOR MODELS PTOC-600-10-6SP.PTOC-600-10-QC AND PTOC-600-10B# ITEMS INCLUDED IN REPAIR KIT FOR MODELS PTOC-1000-10-21SP AND PTOC-1000-175-20SP474

PUMPS & SPRAY EQUIPMENTParts List Model PTOC Centrifugal PumpPARTS LISTMODEL PTOC CENTRIFUGAL PUMP WITH MECHANICAL SEALTRACTOR PTO MOUNTED, BELT DRIVENPART NO.711-3610711-3620711-3680711-3681711-3740711-3780711-3781711-3790711-3810711-3840711-3870711-3781711-4130711-4140REF. #18181819191919202121212122222324252627282929303131323334353637383940414243444445464748495051515253MFG. NO.BAC-27-P-10BAC-27-M-10BAC-27-175BAC-28-8BAC-28-8-M*BAC-28-10#BAC-28-10-MBAC-29-10BAC-29-10BAC-30-10BAC-30-10-MBAC-30-175BAC-31BAC-31-1BAC-32BAC-32-SBAC-33BAC-34BAC-35BAC-36BAC-37BAC 31-1BAC-384095040930BAC-4040960BAC-4240980BAC-44BAC-45BAC-46BAC-47BAC-49BAC-50BAC-51BAC-524111041120BAC-54BAC-55BAC-55-ABAC-57BAC-5841250BAC-6341300BAC-81-QCBAC-81-QC-SBAC-82 QCBAC-83-QCBGKHBGKBEDP NO.40510405004050540590406004061040620406804068140740407504074540780407804079040795408104083040840408504087040900409504093040940409604097040980409904101041020410404107041080410904110041110411204113041140411504118041190412504126041300414504145141460414705261052600DESCRIPTIONNAME PLATE ( FOR PTOC-600-10)NAME PLATE ( FOR PTOC-1000-10-21SP)NAME PLATE ( FOR PTOC-1000-175-20SP)POLY-V BELT, 8 GROOVE ( FOR PTOC-600) - OBSOLETEPOLY-V BELT, 8 GROOVE ( FOR PTOC-1000) - OBSOLETEPOLY-V-BELT, 10 GROOVE ( FOR PTOC-600-10,600-108)POLY-V BELT. 10 GROOVE ( FOR PTOC-1000-10)1.5" P.D. X 5/8" BORE POLY-V PULLEY, 10 GROOVE1.7" P.D. X 5/8" BORE POLY-V PULLEY, 10 GROOVE10.6" P.D. X 2" BORE POLY-V PULLEY, 10 GROOVE ( FOR PTOC-600-10,600-10B)6.375" P.D. X 2" BORE POLY-V PULLEY, 10 GROOVE ( FOR PTOC-1000-10)6.375" P.D. X 2 3/8" BORE POLY-V PULLEY, 10 GROOVE( FOR PTOC-1000-175-20SP)SEALED BALL BEARING, BAC-10 DRIVE SHAFTSEALED BALL BEARING, BAC-10 DRIVE SHAFT (7/92 & UP)EXTERNAL SNAP RING, BAC-6 DRIVEN SHAFTSPACER FOR BAC-6 SHAFTINTERNAL SNAP RING, BAC-14 MOUNTING FRAMEINTERNAL SNAP RING, BAC-15 BEARING HOUSINGEXTERNAL SNAP RING, BAC-10 DRIVE SHAFTEXTERNAL SNAP RING, BAC-13 IDLER ARMSEALED BALL BEARING, BAC-6 DRIVEN SHAFTSEALED BALL BEARING, BAC-6 DRIVEN SHAFT (JULY 1992 AND UP)BEARING SPACER, DRIVE SHAFT3/8" N.C. X 3/4" HEX HEAD CAP SCREW3/8" N.C. X 3/4" HEX HEAD CAP SCREW, STAINLESS STEEL3/8" N.C. SLOTTED SET SCREW3/8" N.C. JAM NUT3/8" N.C. X 1 3/4" HEX HEAD CAP SCREW3/8" FLAT WASHER3/8" LOCK WASHER3/8" N.C. HEX NUT5/8" SPACER5/8" N.C. X 2 1/8" HEX HEAD IDLER CAP SCREWRETAINER RING3/16" X 3/16" X 1 1/4" KEY, DRIVEN SHAFT3/8" X 1/2" X 1 1/2" KEY PTO DRIVE SHAFT1/4" COLD SHUT, TORQUE CHAIN ANCHOR1/8" NPT PIPE PLUG1/8" NPT PIPE PLUG, STAINLESS STEEL ( OPTIONAL)SLINGERIDLER BEARING AND OUTER ROLLER ASSEMBLYIDLER ARM AND OUTER ROLLER ASSEMBLY5/16" N.C. X 5/16" ALLEN HEAD SET SCREW FOR BAC-29 PULLEY1/4" ZERK FITTING, IDLER ARM5/16" N.C. X 3 1/4" HEX HEAD CAP SCREW ( FOR PTOC-600-10B)5/16" N.C. SELF LOCKING NUT ( FOR PTOC-600-10B)3/8" N.C. X 5/8" ALLEN HEAD SET SCREW FOR BAC-30 PULLEYSBALL RETAINER SLEEVE FOR QUICK COUPLER, DELRINBALL RETAINER SLEEVE FOR QUICK COUPLER, STEEL ( OPTIONAL)SPRING FOR QUICK COUPLERBALL FOR QUICK COUPLERBELT AND SHAFT GUARD KIT ( FOR PTO MOUNTED CENTRIFUGAL PUMPS)BELT AND SHAFT GUARD KIT ( FOR PTOC-600-10B)REQ.1111111111112212211221446622221111113311121112111311PUMPS & SPRAY EQUIPMENT475

PUMPS & SPRAY EQUIPMENTPump Torque Bar & ChainMighty PumpPUMP TORQUE BAR & CHAINPART NO.703-85MFG. NO.33680MIGHTY PUMP WILL PUMP 180 GALLONS PERHOUR OF ANY NON-CORROSIVE LIQUID USING A12 VOLT POWER SOURCE.SAFE TO RUN DRY.MIGHTY PUMPSELF PRIMING SUBMERSIBLE PUMPSTATE OF ART GERMAN ENGINEERING.SOLID BRASS SHAFT TO HANDLE SALT WATER.COMPLETE WITH 3' OF 3/8" HOSE AND POWER WIRE.6 MONTH WARRANTY.TRANSFERS:ANTI-FREEZEDIESELWATERMANY OTHER LIQUIDS3 7/8" LENGTH1 7/8" WIDTHWEIGHS ONLY 4 1/2 OZS.OPERATES ON 12 VOLT, 9 VOLT, OR 6 VOLTPUMPS & SPRAY EQUIPMENTPART NO.710-1601710-1604DESCRIPTIONMP-1 Mighty Pump - 18' LiftMP-2 Mighty Pump - 30' LiftFREE COUNTER DEMONSTRATOR WITH PURCHASE OF FOUR OR MORE PUMPS.JUST ADD WATER!You can find all theseitems and more on ourweb site:www.modernusa.comMake Modern Ag PartsYour #1 choice!476

PUMPS & SPRAY EQUIPMENTSpray Gun Kits for Low-Pressure SprayingNylon Pressure Relief ValveSPRAY GUN KITS FOR LOW-PRESSURE SPRAYINGPARTNO.703-1002KITS CONTAIN:24" ALUMINUM SPRAY GUNPRESSURE RELIEF VALVE1/2" X 10 FT. BYPASS HOSE5/8" X 10 FT. SUCTION HOSE3/8" X 20 FT. PRESSUREHOSEALL CLAMPS AND FITTINGSLESS PUMP703-1003703-1002 SPRAY KIT HYPRO 6ROLLER PUMP, TORKBARAND CHAIN, 1 3/8" -6 SPLINESTANDARD ADAPTERMAX. RECOMMENDED PRESSURE- 100 PSIG (1400 kPa)MAX. RECOMMENDED TEMPERATURE- 120°F (50° C)SPRAY GUN KITS: THIS KIT HAS A NUMBER OF POSSIBLE USES: LIVESTOCK ORORCHARD SPRAYING, CROP OR FENCE-ROW SPRAYING, WEED OR INSECTCONTROL, AND CLEANING MACHINERY OR OUTBUILDINGS. KIT SOLDUNASSEMBLED.QUALITY & MODERN:OUR PERSONAL COMMITMENTProviding Customer Satisfaction,Competitive Prices, Quality ProductsAnd Service You Can Rely Upon Since 1963.PUMPS & SPRAY EQUIPMENTChoose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.Your Satisfaction is Guaranteed!477

PUMPS & SPRAY EQUIPMENTShurflo PumpsSHURFLO PUMPS8000 SERIES DIAPHRAGM WITH AUTOMATIC DEMANDFEATURES• Self Priming up to 8 Feet• Chemical Resistant Materials• Designed for Heavy Duty Spraying and Fluid Transfer Applications• Can Run Dry without DamageAUTO DEMAND -1 GPM60 PSI Demand Switch3/8" NPT Female PortsBYPASS -1.4 GPM45 PSI Internal Bypass3/8" NPT Female PortsPART NO. MFG. NO DESCRIPTION710-1301 8000-541-236 Auto-Demand PumpFits Common Applications as follows: Spot Sprayers, Row Crop Sprayers, SilageTreatment, Animal Sprayers, Wood Treatment Sprayers, Transfer Applications, SideDressing Nitrogen, General Purpose and Transfer Applications710-1303 8000-543-250 Bypass PumpFits Common Applications as follows: Foam Markers, Spot Sprayers, GeneralPurpose UsesSEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING/BREAKDOWN2088 SERIES DIAPHRAGM PUMP WITH AUTOMATIC DEMANDA Premium Pump with Fin Cooled MotorPUMPS & SPRAY EQUIPMENT3.6 GPM45 PSI Demand Switch1/2 MSPT PortsFEATURES• Self Priming up to 12 Feet• Can Run Dry without Damage• Built-in Check Valve Prevents Back Flow of Fluid into the SolutionTank• Continuous Duty Motor• Chemical Resistant MaterialsPART NO. MFG. NO DESCRIPTION710-1304 2088-313-145 High Flow, Fin CooledDiaphragm PumpFits Common Applications as follows: Spot Sprayers, Row Crop Sprayers, SilageSprayers, Animal Sprayers, Fertilizer Systems, Chemical Application Systems(Regent One-Pass, ACA, etc.), Mini Bulk Systems, General Purpose and TransferPump ApplicationsSEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING/BREAKDOWN478

PUMPS & SPRAY EQUIPMENTShurflo Pumps 8000 Series Parts Kit ListShurflo Pumps 2088 Series Parts Kit ListSHURFLO PUMPS 8000 SERIES PARTS KIT LISTPUMPPART NO.710-1301710-1303MODELNUMBER8000-541-2368000-543-2501COMPLETEPUMPHEADASSEMBLYN/A94-382-092SWITCHASSEMBLY94-375-05N/A3CHECKVALVEASSEMBLY93-374-05N/A4UPPERHOUSING94-379-0094-379-005/9BYPASS/NON BYPASS VALVEASSEMBLY94-390-0594-391-096DIAPHRAGMASSEMBLYN/AN/A7/10DRIVEASSEMBLY94-385-3094-385-328MOTOR11-148-0411-111-00SHURFLO PUMPS 2088 SERIES PARTS KIT LISTPUMPS & SPRAY EQUIPMENTPUMPPART NO.710-1304MODELNUMBER2088-313-1451COMPLETEPUMPHEADASSEMBLY94-236-152SWITCHASSEMBLY94-230-553CHECKVALVEASSEMBLY94-237-054UPPERHOUSING94-231-305BYPASS/NON BYPASS VALVEASSEMBLY94-232-056DRIVE/IMPELLERDIAPHRAGMASSEMBLY94-238-037MOTOR11-185-06479

PUMPS & SPRAY EQUIPMENTMonarch Self Priming PumpsMonarch Centrifugal Pump Parts BreakdownMONARCH SELF PRIMING PUMPSTHESE SELF-PRIMING CENTRIFUGAL PUMPS ARE THE IDEAL ALL PURPOSEUNITS FOR DRAINING SUMPS, CELLARS, EXCAVATIONS, ETC. OR FOR FILLINGTANKS, LIVESTOCK WATERING, FLOOD IRRIGATION OR FIRE FIGHTING STAND-BY SERVICE. IDEAL FOR AG CHEMICAL TRANSFER AND SPRAYING, LIQUID FER-TILIZER.PART NO.710-104710-103MODEL NO.PERFORMANCE CHARTTOTAL IN HEAD FEETDESCRIPTIONBriggs and Stratton Gas EngineBSGF8 Pump W/ Viton Seals2" X 3 HP W/ 3 QT. Fuel TankBriggs and Stratton Gas Engine5BSGF-8 Pump W/ Viton Seals2" X 5 HP W/ 2 QT. Fuel TankBSGF-8&5BSGF-830 40 50 60 70 80CAPACITY IN US GPM130 115 102 85 65 37MONARCH CENTRIFUGAL PUMP PARTS BREAKDOWNMODELSa= BSGF-5b= BSGF-8BSGF-8ICc= 5BSGF-85BSGF-8H5BSGF-8ICd= BSGF-10e= BSGF-12f= 8BSGF-128BSGF-12H (TYPE B)8BSGF-12ICg= BSGF-6 (DISCONTINUED)PUMPS & SPRAY EQUIPMENT#1111122333444455667777788899CODE NO.401660401661414145414142433184176687176688121530121531164640438275438280438480438481438380400136240344240359438180438190438200438477438475193920193930193919438248438030QUANTITY REQUIRED FORa1b1d e f g1441111114411111c(1)14411111144111111441111111441111144111111DESCRIPTIONHANDLE, (1) (5BSGF-8H)HANDLE, (EXCEPT 5BSGF-8H)HANDLEHANDLE, (EXCEPT 5BSGF-12H)HANDLE, (8BSGF-12H ONLY)TOOTHLOCK WASHER, 5/16"TOOTHLOCK WASHER, 3/8"BOLT 5/16" UNF X 3/4"BOLT 5/16" UNF X 7/8"BOLT 3/8" UNF X 1 3/4"ADAPTERADAPTERADAPTERADAPTERSLEEVESLEEVEMECHANICAL SEAL, 3/4" I.D.MECHANICAL SEAL, 1 1/4" I.D.IMPELLERIMPELLERIMPELLERIMPELLERIMPELLERGASKETGASKETGASKETCASINGCASING#99101111121314151515151515151515161617171818181919N/SCODE NO.438040438471185650119800119810174440176530128220201950201952202000201915202001201913201918202002201919119990164620175500176688191140191272191270414140414143128230QUANTITY REQUIRED FORa b c d e f g1 1 12444414411244441114411244441114411124444144111244441441141124444111441182444414411DESCRIPTIONCASINGCASINGPIPE PLUG, 3/4" NPTBOLT 5/16" UNC X 1 1/2"BOLT 5/16" UNC X 1 3/4"PLAIN WASHERSPRING WASHER, 5/16"NUT, 5/16" UNCENGINE, B & S, 3HP/ #80232ENGINE, B & S, 3HP/ #082232-4036-02ENGINE, HONDA 4HP/#GX120TXENGINE, B & S, 5HP/ #130232ENGINE, HONDA 5HP/#GX160TXENGINE, B & S/IC 5HP/#132232-4035-02ENGINE, B & S, 8HP/#190432ENGINE, HONDA 9HP/#GX270PXENGINE, B & S/IC 8HP/#195432-4047-03BOLT 3/8" UNC X 3/4"STUD, 3/8" UNC X 1 1/4" (NOT SHOWN)ALUMINUM WASHER, 3/8"TOOTHLOCK WASHER, 3/8"FLINGER (EXCEPT 5 BSGF-8H)FLINGER (5BSGF-8H ONLY)FLINGERBASEBASE (NOT AS SHOWN)NUT, 3/8" UNCN/S: (NOT SHOWN)480

PUMPS & SPRAY EQUIPMENTBanjo Polypropylene PumpsFeatures:• Precision molded construction• Corrosion resistant• Low maintenance• Lightweight• Innovative design• Briggs and Stratton Gas EngineBANJO POLYPROPYLENE PUMPS2" Inlet X 2" OutletThe pump is molded from a special high strengthpolypropylene which is glass reinforced for strengthand toughness. The rubber parts are made of EPDMcompound.Perfectly balanced impeller: Because the impeller is molded, each of the flutes is uniform in thickness and shape givingperfect balance. The impeller is lightweight, which reduces load and wear on the engine crankshaft bearing. Thisgreatly reduces the problem of bearing wear, which causes seal oscillation and failure.We have reversed the seal! The rotatingportion of the seal (ceramic section) islocated in the impeller. The carbon faceand spring section is located in the rearpump case bracket and does not rotate.For additional seal protection, small vanes are molded in to the back sideof the impeller. During operation, these vanes (on the back side of theimpeller) pump out a major portion of the liquid from the seal area whichreduces pressure. The internal operating pressure of the pump is approximately50 P.S.I. With the seal area operating at only 5 P.S.I.This leaves enough liquid in the seal area to lubricate and cool.PERFORMANCE CHART (BASED ON WATER)HEAD IN FEETPRESSURE P.S.I.2" SIZE - 3 HP GPM2" SIZE - 5 HP GPMPART NO.710-202710-203710-207710-212710-243104.3100160SUCTION LIFT (FEET)2" SIZE WITH 2" SUCTION LINE(3 HP)(TIME IN SEC.)2" SIZE WITH 2" SUCTION LINE(5 HP)(TIME IN SEC.)5208.7100150SUCTION LIFTS ANDPRIMING TIMES: 3600 R.P.M.12201024403013.0100140DESCRIPTION200P-3 BANJO POLY PUMP 2" X 3.5 H.P.200P-5 BANJO POLY PUMP 2" X 5.5 H.P.REPAIR KIT BUNA SEALSREPAIR KIT VITON SEALSCHECK VALVE FOR 2" BANJO POLY PUMPSSEE COMPLETE PARTS LISTING AND BREAKDOWN NEXT PAGE.1535584017.3991282042705021.7961152548806026.092100 WARRANTY1 Year on Pump OnlyMotor must be taken toBriggs and Stratton Dealer285185PUMPS & SPRAY EQUIPMENT481

PUMPS & SPRAY EQUIPMENTBanjo Poly Pump Repair Parts ListBANJO POLY PUMPREPAIR PARTS LISTNEW DESIGNOLD DESIGNFor Pumps Manufactured After Sept. 1996 For Pumps Manufactured Before Sept. 1996PARTNO.ITEMDESCRIPTION(NEW)DESCRIPTION(OLD)QTY.(NEW) (OLD)MFG NO.(NEW) (OLD)PUMPS & SPRAY EQUIPMENT710-247710-237710-248710-245710-271710-272710-242710-241+☛710-221+☛710-253☛710-230+710-233710-273710-274710-232+710-222710-238710-244710-243710-240710-250710-246710-249710-275710-276710-277710-246710-278710-252☛+☛☛+++☛710-207☛710-212☛710-225☛2345 & 678910111112121314141515161718192021222526272829+ For old design pumps.☛ Stock items.Bodynuts SSLockwasher SSPoly PumpRear BracketSeal Assembly*“O” Ring For Screw Heads*Bracket Screws SS“O” Ring Segment*Body “O” Ring*Poly Pump Impeller5 Vane Poly Pump ImpellerImpeller Bit SSImpeller BitImpeller Bit Gasket*Impeller Hex NutAcorn NutPoly Pump VoluteNew Style Poly Pump VoluteVolute Screws SSPoly Pump Check ValvePoly Pump Body Assy.Body Screws SSPrime/Drain Plug“O” Ring Prime/Drain Plug*Upper Volute Screw SSRear Backet Washer SSImpeller KeyPoly Pump Slinger*”O” Ring for Seal Assy.*Pump Seal/”O” Ring Kit(Items Marked With *)Repair Kit Buna SealsRepair Kit Viton Seals2” Poly Pump only for Banjo #205PBodynutsLockwasherRear BracketSeal Assembly*“O” Ring For Screw Heads*Bracket Screws“O” Ring Segment*Body “O” Ring*3 Vane Impeller- - -Impeller Stud- - -“O” Ring Acorn Nut*Acorn NutAcorn NutVolute- - -Volute ScrewsCheck ValveBodyBody ScrewsPrime Plug“O” Ring Prime Plug*Drain PlugUpper Volute Screw1/4" S.S. WasherImpeller KeySlinger “O” Ring*Seal ”O” Ring*Pump Seal/”O” Ring Kit(Items Marked With *)Repair Kit Buna SealsRepair Kit Viton SealsSOME PARTS SHOWN SHIPPED DIRECT FROM FACTORY VIA U. P. S.1010114411111111111211101114111110101144111-1-1111-2111011114131-V07019V0701812703A127131271712715A1275412719A12771127721276512765A12774VA12775A127751270212702A127251270512712A1272012777UV1516312723129001290112902A127161271012999A- -- -205POV07019V0701812703127131271712715127541271912771- -12765- -12774V127751277512702- -12725127051201212720127761272212723129001290112902127221271012999- -- -- -482

PUMPS & SPRAY EQUIPMENTCast Iron Banjo PumpBanjo Cast Iron Pump Parts BreakddownWARRANTY: 1 Year on Pump OnlyMotor must be taken to Briggsand Stratton DealerCAST IRON BANJO PUMPBANJO CAST IRON PUMP PARTS BREAKDOWNPRECAUTION-WARNING: Pleasedo not run pumps dry, restrictor reduce port sizes or deadhead pumps. This could causecomponent failure to pump. NoFlammables.Features: • Cast iron construction for ruggeddependable service• Stainless steel shaft sleeve to protectengine shaft• Carbon ceramic seal with stainless steelcup and spring with viton rubber• Replaceable inlet and outlet flanges• Dynamic balanced impeller• Briggs and Stratton Gas EnginePART NO.710-214710-208DESCRIPTION200PI-5 Banjo Cast Iron Pump 2" X 5.5 H.P.Repair Kit for Cast Iron Pump*Items Included In Repair KitALL PARTS SHOWN SHIPPED DIRECT FROM FACTORY VIA U. P. S.ITEM11223344455567891011MFG NO.1700017001170021700317004170461700517006*1700717008*17008-4.117008-4.6170091701017011*170131701617018*DESCRIPTIONFlange - Outlet 2"Flange - Outlet 1 1/2"Flange - Inlet 20º 2"Flange - Inlet 20º 1 1/2"Adapter - Gas EngineCF Adapter - For Close CoupledElectric Drive PumpSleeve - Drive 5/8"Sleeve - Drive 3/4"Sleeve - Drive 7/8"ImpellerImpeller - 4.1"Impeller - 4.6"Impeller NutNut, Hex 1/2"-13 UNF - RHPlate - WearGasket EPDMGasket & Flap EPDMGasket - AdapterITEM12131414151617181920222324252626282930MFG NO.1701917022170231702417025*17026170271702917030*V10118V101191288312882170401702817035*17042V10118V10119DESCRIPTIONCapscrew 5/16"-18 x 3/4"HandleClamp, 5/8", 3/4" ShaftClamp, 7/8" ShaftGasket - Wear PlatePump HousingNut, Acorn 5/16"-18Capscrew 5/16"-18 x 1 3/4"Flat Head 82º C'SK. ScrewLock Washer 5/16"5/16"-18 Hex Nut S.S.Bearing Only with 3/4" Straight ShaftBearing Pedestal AssemblyCap Screw 5/16"-24 NFSeal Assy. (EPDM)Seal Assy. (Viton)StudLock Washer 5/16"5/16"-18 Hex Nut S.S.PUMPS & SPRAY EQUIPMENT483

PUMPS & SPRAY EQUIPMENTBanjo Cam Lever CouplingsMALE ADAPTER-FEMALE THREADTYPE ABANJO CAM LEVER COUPLINGSPOLYPROPYLENE PRECISION MOLDEDFEMALE COUPLER-MALE THREADTYPE BPART NO.314-624314-632314-640314-648314-664314-672FEMALE COUPLER-HOSE SHANKPART NO.314-2624314-2632314-2640314-2648314-2664314-2672MFG. NO.075A100A125A150A200A300ATYPE CMFG. NO.075C100C125C150C200C300CSIZE3/4"1"1 1/4"1 1/2"2"3"MALE ADAPTER-HOSE SHANKTYPE ESIZE3/4"1"1 1/4"1 1/2"2"3"PART NO.314-1624314-1632314-1640314-1648314-1664314-1672MFG. NO.075B100B125B150B200B300BFEMALE COUPLER-FEMALEPART NO.314-3624314-3632314-3640314-3648314-3664314-3672TYPE DMFG. NO.075D100D125D150D200D300DMALE ADAPTER-MALE THREADTYPE FSIZE3/4"1"1 1/4"1 1/2"2"3"SIZE3/4"1"1 1/4"1 1/2"2"3"PUMPS & SPRAY EQUIPMENTPART NO.314-4624314-4632314-4640314-4648314-4664314-4672MFG. NO.075E100E125E150E200E300ESIZE3/4"1"1 1/4"1 1/2"2"3"POLYPROPYLENE HOSE BARBSPART NO.314-825314-827314-828314-833PART NO.314-5624314-5632314-5640314-5648314-5664314-5668MFG. NO.075F100F125F150F200F300FANGLE COUPLINGSTYPE FMFG NO. THREAD BARBSIZE SIZEPART NO. MFG. NO.HB-150 1-1/2" 1-1/2"314-5672 200F90HB-150200HB-200HB-3001-1/2"2"3"2"2"3"P.S.I. RATINGS ON ALL BANJO POLY FITTINGSSIZE3/8" thru 2"2-1/2 thru 3"SIZE3/4"1"1 1/4"1 1/2"2"3"SIZE2"P.S.I.100 psi @ 0° Fahrenheit125 psi @ 70° Fahrenheit70 psi @ 150° Fahrenheit75 psi max.484

PUMPS & SPRAY EQUIPMENTBanjo Cam Lever CouplingsBasket StrainersBanjo Ball Valves, Angle ValvesCAP FOR MALE ADAPTERPART NO.314-7624314-7632314-7648314-7664314-7672MFG. NO.075CAP100/125CAP150CAP200CAP300CAPBANJO CAM LEVER COUPLINGSSIZE3/4"1" or 1-1/4"1-1/2"2"3"BASKET STRAINERSPART NO.319-1048319-1064MFG. NO.150SBS200SBSSIZE1-1/2"2"BANJO BALL VALVESPART NO.MFG. NO.PLUG FOR FEMALE COUPLERPART NO.314-6624314-6632314-6648314-6664314-6672MFG.NO.075PL100/125PL150PL200PL300PLSIZE3/4"1" or 1-1/4"1-1/2"2"3"REPLACEMENT GASKETSFOR CAM COUPLINGSPART NO.314-2061314-2062314-2064314-2065314-2067SIZEMFG. NO.075G100G150G200G300GCOUPLINGSIZE3/4"1"; 1-1/4"1-1/2"2"3"PORT OPENINGPARTNO.319-32319-33ANGLE VALVESMFG.NO.VA150VA200SIZE1 1/2" FPT2" FPT319-1319-2319-3319-5319-7319-8319-9319-10319-11PORTOPENING1-1/2"1-1/2"REPLACEMENT HANDLES FORBALL AND ANGLE VALVESV50V075V100V125FPV150V200V200FPV300V300FP1/2" FPT3/4" FPT1" FPT1 1/4" FPT1 1/2" FPT2" FPT2" FPT3" FPT3" FPTBANJO SINGLEUNION BALLVALVESPART NO.319-17319-18319-19319-20319-21319-22MFG. NO.UV050FPUV075FPUV100FPUV125FPUV150FPUV200FP1/2"3/4"3/4"1-1/4"1-1/2"1-1/2"2"2-1/2"3"SIZE1/2"3/4"1"1-1/4"1-1/2"2"REPLACEMENT HANDLE FORSINGLE UNION BALL VALVESPUMPS & SPRAY EQUIPMENTPART NO.319-204319-303319-403319-503MFG. NO.V07153V10153V20153V25153FOR VALVE NO.319-1, 2, 3319-5319-7, 8, 32, 33319-9, 10, 11PART NO.319-102MFG. NO.UV07153FOR VALVENO.319-17, 18485

PUMPS & SPRAY EQUIPMENTHypro “Polypropylene” Line StrainersReplacement ScreensReplacement GasketsHYPRO "POLYPROPYLENE"LINE STRAINERS3350 SERIESSTRAINERS HAVE FEMALE PORTS WITH STAINLESS STEEL FERRULEREINFORCEMENTS. 3/4", 1" AND 1 1/4" NPT PORT SIZES. EPDM GASKET.HEAVYDUTY STAINLESS STEEL AND MONEL SCREENS AVAILABLE.RATING: 150 PSI AT 70°F./100 PSI AT 125°F.DURABLE POLYCAP AND BOWLSPART NO.712-3320712-3321712-3322712-3323MFG. NO.3350-00343350-00723350-00733350-0058SIZE3/4"1"1-1/4"1-1/2"SCREEN MESH50505050PART NO.712-3801712-3802712-3803712-3807REPLACEMENT SCREENSMFG. NO.3800-00253800-00443800-00413800-0066STRAINERSIZE1/2" & 3/4"1-1/4"1"1-1/2"MESH50505050REPLACEMENT GASKETSPART NO.712-1744712-1757712-1745712-1758MFG. NO.1700-00441700-00571700-00451700-0058STRAINERSIZE1/2" & 3/4"1" THRU 1-1/2"1/2" & 3/4"1" THRU 1-1/2"MATERIALBUNABUNAVITONVITONPUMPS & SPRAY EQUIPMENTQUALITY & MODERN:OUR PERSONAL COMMITMENTProviding Customer Satisfaction,Competitive Prices, Quality ProductsAnd Service You Can Rely Upon Since 1963.486

PUMPS & SPRAY EQUIPMENTBanjo Line StrainersSuction StrainersBANJO LINE STRAINERS• PRECISION MOLDED CONSTRUCTION• CORROSION RESISTANT• LIGHT WEIGHT• FIBERGLASS REINFORCED• EASY GRIP CAP• STAINLESS STEEL SCREEN• EDPM GASKETPOLYPROPYLENECOMPLETE UNITSPARTNO.319-1205319-1208319-1210319-1217319-1223SIZE3/4" X 3/4"1" X 1"1-1/4" X 1-1/4"1-1/2" X 1-1/2"2" X 2"SCREENMESH4040205050MFG.NO.LS07450LS100-40LS125-20LS150-50PLS200-50PGASKETS FOR STRAINERSPART NO.319-1268319-1269319-1270*319-1285PART NO.319-1281SIZE1/2" & 3/4"1" & 1-1/4"1-1/2" & 2"1-1/2" & 2"MFG. NO.LS075GLS100GLS200GLS150G* NEW STYLE SQUARE GASKETCAP FOR STRAINERSSIZE2"MFG. NO.LS200CSTAINLESS STEEL SCREENS FORSTRAINERSPART NO.319-1254319-1255319-1256319-1259319-1261STRAINERSIZE1" & 1 1/4"1" & 1 1/4"1" & 1 1/4"1 1/2 & 21 1/2 & 2SCREENMESH2040802050MFG.NO.LS120LS140LS180LS220LS250SUCTION STRAINERAPPROX. WT. 4 OZ.ALUMINUM WITH STAINLESS STEEL SCREENSNO.PART NO. SIZE MESH MFG.700-730 1/2" 50 7130-675-ALSUCTION STRAINERSNYLON SUCTION STRAINERECONOMICAL, COMPLETELY NYLON SUCTION STRAIN-ER WITH NYLON SCREEN. AVAILABLE WITH3/4" HOSE BARB AND IN 50-MESH SCREENPART NO. SIZE MESH MFG. NO.712-3325 3/4" 50 36761-2PUMPS & SPRAY EQUIPMENT# 1700 SUCTION STRAINER APPROX. WT. 8 OZ.ALUMINUM WITH STAINLESS STEEL SCREENSPART NO. INLET MESH MFG. NO.703-400 3/4" 40 1700-2487

PUMPS & SPRAY EQUIPMENTTeejet Line StrainersReplacement Screens, Gaskets, Bowls,In Line Strainers, Teejet Brass StrainerTEEJET LIQUID LINE STRAINERS122 SERIESCompact size strainer well suited for small agricultural and turf sprayers. Polypropylene construction forexcellent chemical resistance. Maximum pressure 150 P.S.I. 50 Mesh screen.PART NO. TEEJET NO. PIPE CONNECTION700-618 12212PP50 ½"700-619 12234PP50 ¾"124 SERIESStandard size strainer with heads available in polypropylene, nylon, and aluminum. Bowlmaterials include nylon or polypropylene. Each strainer includes stainless steel screen withpolypropylene screens. Viton o-ring seal supplied with ¾" and 1" nylon models. EPDM sealsupplied with ¾" and 1" polypropylene models.PUMPS & SPRAY EQUIPMENTPART NO. TEEJET NO. PIPE CONNECTION MATERIAL MESH700-604 124A34NYB50 ¾" Nylon 50700-608 124A1NYB50 1" Nylon 50700-609 124A114NYB50 1 ¼" Nylon 50700-613 124A112NYB50 1 ½" Nylon 50700-620 124A34PP50 ¾" Poly 50700-621 124A1PP50 1" Poly 50700-614 124A34AL50 ¾" Alum 50700-615 124A1AL50 1" Alum 50700-616 124A114AL50 1 ¼" Alum 50700-617 124A112AL50 1 ½" Alum 50PARTS FOR 124 SERIES LINE STRAINERSPART NO. TEEJET NO. DESCRIPTION700-632 CP169033 30 Mesh Replacement Screen for ¾" and 1"700-633 CP169034 50 Mesh Replacement Screen for ¾" and 1"700-634 CP169035 80 Mesh Replacement Screen for ¾" and 1"700-635 CP159411 16 Mesh Replacement Screen for 1 ¼" and 1 ½"700-636 CP159414 80 Mesh Replacement Screen for 1 ¼" and 1 ½"700-637 CP159413 50 Mesh Replacement Screen for 1 ¼" and 1 ½"700-638 CP159412 30 Mesh Replacement Screen for 1 ¼" and 1 ½"700-639 CP15017NY Nylon Replacement Bowl 1 ¼" and 1 ½"700-761 CP15403NY Nylon Replacement Bowl ¾" and 1"700-762 CP12288NY Nylon Replacement Bowl for 1 ¼" and 1 ½"700-640 CP12291VI O-Ring Seal Viton for 1 ¼" and 1 ½"700-763 CP77172226BU O-Ring Seal Buna for ¾" and 1"700-764 CP77172226VI O-Ring Seal Viton for ¾" and 1"700-765 CP12291BU O-Ring Seal Buna for 1 ¼" and 1 ½"488

PUMPS & SPRAY EQUIPMENT3/4Q IN-LINE STRAINERCompact strainer for pressures to 125 P.S.I.Made of brass with ¾" NPT female inlet and outlets.PART NO. TEEJET NO. DESCRIPTION700-750 3/4Q-50 Brass Strainer- 50 Mesh Screen700-752 46334 Replacement Screen- 50 Mesh700-754 4634BU Buna Gasket3/4QATW TEEJET BRASS STRAINERFOR PRESSURES UP TO 125 P.S.I.Brass line strainer has stainless steel double screen design withbottom pipe plug for easy flushing and cleaning. Lower cap foreasy screen removal. ¾" NPT female inlet and outlet.PART NO. TEEJET NO. DESCRIPTIONATW700-653 34ATWB50 Brass Line Strainer with 50 Mesh Screen700-654 34ATWAL50 Aluminum Line Strainer with 50 Mesh Screen700-678 CP169083 50 Mesh Screen for ATW Strainer700-679 CP169085 100 Mesh Screen for ATW Strainer700-680 CP5851 Bottom Cap for ATW Strainer700-682 CP5852NY Gasket for 5851 CapOUR PERSONAL COMMITMENTProviding Customer Satisfaction,Competitive Prices, Quality ProductsAnd Service You Can Rely Upon Since 1963.PUMPS & SPRAY EQUIPMENTChoose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.Your Satisfaction is Guaranteed!489

PUMPS & SPRAY EQUIPMENTPressure Gauges-Glycerin FilledStandard GaugeGauge DamperPRESSURE GAUGES2 1/2" GLYCERIN-FILLED GAUGE.GAUGES FILLED WITH GLYCERIN PROVIDEEFFECTIVE DAMPING OF MOST PULSATIONAND VIBRATION, AND PROVIDE LUBRICATIONOF ALL MOVING PARTS; THESE GAUGESREQUIRE NO DAMPING DEVICE. STAINLESSCASE AND RIM. BOTTOM STEM 1/4"N.P.T. BRASSGLYCERIN FILLEDPART NO.720-106720-107720-108720-109720-110720-111720-112720-113720-114720-115720-116720-117720-118RANGE P.S.I.0-300-600-1000-1600-2000-3000-6000-10000-15000-20000-30000-50000-6000PUMPS & SPRAY EQUIPMENTSTANDARD GAUGES2 1/2" STANDARD GAUGELOW TO MODERATE PRESSURE GAUGE WITHSPECIAL VALVE TO INSURE ACCURACY. STANDARDWITH PLASTIC CASE. EASILY CLEANED VIBRATIONSNUBBER HOLE IN 1/4" N.P.T. STEM.BOTTOM STEM.PART NO.720-2432720-2433720-2436720-2437720-2439RANGE P.S.I.0-600-1000-2000-3000-600GAUGE DAMPER• REDUCES VIBRATION OF STANDARD GAUGES• ECONOMICAL• NICKEL PLATED BRASS• 1/4 MPT X 1/4 FPT490PART NO.712-2401MFG. NO.2404-0047

PUMPS & SPRAY EQUIPMENTW L HAMILTON SPRAY GUNSSENIOR GUNS ARE THE MODEL OF THE INDUSTRY;LONG AND RUGGED - CAPABLE OF THE VARIOUSDEMANDING AGRICULTURAL SPRAY CHORES. # 5DISC IS STANDARD.WITH REVOLVING HANDLE ADJUSTMENTPART NO. MFG. NO. INLET MATERIAL700-15 1200-1 3/4" GHT BRASSPART NO. MFG. NO. INLET MATERIAL700-14 1000-1 3/4" GHT BRASSPARTS DIAGRAMITEM MFG. NO. DESCRIPTION CAT. NO.PART NO.1 1001-004-02 HANDLE LOCK NUT2 1001-003-01 HANDLE RET. NUT3 1100-051-89 PLASTIC NUT4 1001-002-01 FERRULE WASHER5 1100-004-01 LOWER VALVE ROD6 1000-016-01 WORM7 1000-011-01 BARREL 700-358 1200-002-01 NOZZLE HEAD 700-62349 1300-053-11 NOZZLE GASKET 700-620110 1200-007-05 NOZZLE DISC 700-620311 1200-004-01 NOZZLE CAP 700-620212 1200-001-01 UPPER VALVE ROD 700-622313 1200-005-02 STRAIGHT GUIDE14 1200-009-01 SPRAY EXPANDER15 1005-056-11 DISC GASKET 700-621116 1200-008-01 SWIRL BAFFLE 700-623217 1005-057-01 VALVE SCREW 700-623318 1100-009-01 VALVE CAP 700-622619 6702-059-09 VALVE GASKET 700-621420 1100-056-03 VALVE SPRING 700-620621 1100-010-01 VALVE HOLDER 700-620722 1100-058-11 POLY VALVE 700-620423 1100-011-01 VALVE WASHER 700-6208PUMPS & SPRAY EQUIPMENT24 1100-008-01 VALVE STEM 700-622725 1100-053-09 "O" RING 700-620926 1000-002-01 PACKING NUT 700-622827 1000-051-05 PACKING RING28 1100-052-05 TRIGGER PIN29 1100-054-05 LATCH PIN (2)30 1100-003-02 LATCH31 1100-055-03 TRIGGER SPRING32 1100-002-01 TRIGGER33 1100-011-01 INTAKE 3/4 FGHT 700-620834 1000-055-49 HOSE GASKET491

PUMPS & SPRAY EQUIPMENTGun Jet No. 46 Trigger ValveTeejet Trigger ValveGUNJETNO. 46 TRIGGER VALVEATTACHES TO THE INLETS OF ANY GUNJETSPRAY GUNS WITH 3/4" GARDEN HOSETHREAD (F) CONNECTIONS. PROVIDES "ON-10 9OFF" TRIGGER CONTROL OF GUN. MADE OFALUMINUM WITH STAINLESS STEEL INTER-NAL PARTS. WEIGHT 13 OZ. BUILT WITH 3/4"GARDEN HOSE THREAD (F) INLET CONNEC-TION.PART NO.700-6 CALL FOR PRICES AND AVAILABILITY ON PARTS8 7 6121651513114143 2 1 15PART NO.ITEMMFG NO.DESCRIPTION700-151* 1* 234* 5678910111213* 14* 1516CP7502-ALCP6710-1-BUCP7501-ALCP7458-ALCP7503-LEACP7500-ALCP7504-SSCP7499-SSCP7622-302SSCP7498-SSCP7623-IZPCP6509-INPCP7477-IZPCP17720-420SSCP5808-BUCP7626-BU*AB46-KITSEAT HOLDER, ALUMINUMSEAT, BUNA-NSEAT WASHER, ALUMINUMBODY, ALUMINUMPACKING, THERMO-LEATHER (3 REQUIRED)PACKING SCREW, ALUMINUMSPRING, STAINLESS STEELSTEM, STAINLESS STEEL#6 BURR, TYPE 302 STAINLESS STEELSTEM NUT, STAINLESS STEELR3220 RIVET, STEEL, ZINC PLATED (2 REQUIRED)TRIGGER, STEEL, NICKEL PLATEDTRIGGER LOCK, STEEL, ZINC PLATEDROLL PIN, TYPE 420 STAINLESS STEELGASKET, FOR GARDEN HOSE CONN., BUNNA-N (2 REQUIRED)GASKET, FOR OUTLET CONN., BUNA-N (2 REQUIRED)SPARE PARTS KITPUMPS & SPRAY EQUIPMENTNEW NO. 473 TRIGGER VALVETop quality hand valves for use with spray nozzles extensions and handle to suit application needs. Valves have 1/4”NPT Female connection. Maximum flow rate of 2 GPM with maximum pressure of 250 P.S.I. Use with all types of Teejetand Conejet tips.Typical assembly.PART NO. DESCRIPTION700-58 4688 Triggerjet Valve w/Triggerlock64664727700-10 6466 Triggerjet valve less Triggerlock-withextra long trigger700-6033 AB4688 Repair Kit for 4688/6466700-9 4727 Suregrip Handle- brass with rubbercovering-1/4” NPT Male492

31 Spray GunPUMPS & SPRAY EQUIPMENT31 SPRAYGUNBRASS FORGED BODY AND NICKEL PLATED STEEL TRIGGER.TEFLON VALVE SEAT AND PACKING ... STAINLESS STEEL VALVE STEM.WEIGHT 12 OUNCES. COMFORTABLE PALM FITTING GUN. FOR USE WITHANY TEEJET SPRAY TIP. 1/4" NPS (M) INLET CONNECTION.8796700-3FOR FLOW RATES UP TO 5 GPMPART NO.700-345181710 11 12 13 14161523FOR PRESSURES UP TO 500 P.S.I.1CALL FOR PRICES AND AVAILABILITY ON PARTSPART NO. ITEM700-1325 12* 3700-381*4* 56789* 101112131415161718PART NO.CP13257490-BRTF74907490-L9032-1-BRSS9134-302SS9108-304SS9033-INP9034-1-IZP9034-2-IZP7487-1-TEF7487-LEA7485-NP903590368633-NP86343929-M8635-NY90629062-19062-39062-4*AB31-KITDESCRIPTIONCAP, BRASSSPRAY TIPSEAT, BRASS & TEFLON (STANDARD)SEAT, BRASS (OPTIONAL)SEAT, LEAD (OPTIONAL)SUB-ASSEMBLY, STAINLESS STEEL STEM & BRASS GUIDESPRING, STAINLESS STEEL, TYPE 302TRIGGER LOCK WIRE, STAIN. STEEL, TYPE 304 (FOR #31TLONLY)TRIGGER, STEEL-NICKEL PLATEDSCREW HOUSING, STEEL-ZINC PLATEDSCREW, STEEL-ZINC PLATEDPACKING, TEFLON (3 REQUIRED) (STANDARD)PACKING, LEATHER (4 REQUIRED) (OPTIONAL)PACKING SCREW, BRASS-NICKEL PLATEDLOCKNUT, BRASSNUT, BRASSSTRAINER BODY, BRASS-NICKEL PLATED (OPTIONAL)SCREEN SUPPORT, BRASS (OPTIONAL)MONEL SCREEN, 50 OR 100 MESH (OPTIONAL)GASKET, NYLON (OPTIONAL)BODY, BRASS (FOR #31)BODY, BRASS (FOR #31-1/4 F)BODY, BRASS (FOR #31 TL)BODY BRASS (FOR #31 TL - 1/4 F)SPARE PARTS KITPUMPS & SPRAY EQUIPMENT493

PUMPS & SPRAY EQUIPMENTTrigger Jet Poly-ProTRIGGERJET POLY-PRO SPRAY GUNSTriggerjet Polypropylene Sprayguns are lightweight for use with all types of low pressure spray systems with150 P.S.I. maximum operating pressure. Guns have trigger lock, adjustable cone nozzles, and accept all standardTeejet Spray tips and tip strainers.PART NO. TEEJET NO. DESCRIPTION700-16 22670PP15406 Complete Gun 15” Wand-3/8” Hose Barb700-17 22670PP24406 Complete Gun 24” Wand-3/8” Hose Barb700-201 22670PP1514 Complete Gun 15” Wand-1/4” NPTF Female Inlet700-202 22670PP2414 Complete Gun 24” Wand-1/4” NPTF Female Inlet700-24 22650PP14 Gun Only (Less Tip & Wand) - 1/4” NPTF Female Inlet700-25 22650PP300 Gun Only (Less Tip & Wand) - 1/4” Hose Barb700-12 22650PP406 Gun Only (Less Tip & Wand) - 3/8” Hose Barb700-6095 CP22654PP Poly Handle Only- 1/4” NPTF Female700-6071 CP2266315PP 15” Poly Extension Tube700-88 CP2266324PP 24” Poly Extension Tube700-46 CP2266515PP 15” Replacement Wand700-47 CP2266524PP 24” Replacement Wand700-48 CP22673PP 45 Degree Wand Adapter700-768 CP7717-2/110 Viton O-Ring for Poly Cap (2 Required)700-49 CP22668PP Wand End Cap700-6083 AB22670PP Repair Parts KitPUMPS & SPRAY EQUIPMENTTRIGGERJET POLY GUN WITH ALUMINUM WANDThis lightweight polypropylene gun with a 15” aluminum extensions. Comfortable handle with trigger lock and3/8” hose barb inlet. Accepts all standard Teejet Spray Tips. Maximum pressure 100 P.S.I.PART NO. TEEJET NO.710-1504 50120AL18TEEJET ADJUSTABLE POLY-NOZZLESAdjustable Conejet poly tips provide excellent chemical resistance. They are lightweight and well suited forhand held & backpack sprayers. EPDM standard O-ring- 11/16” Teejet thread. For 22670 series above andmany others.PART NO. TEEJET NO. DESCRIPTION700-67 5500PPBX3 No. 3 Nozzle700-63 5500PPBX6 No. 6 Nozzle700-64 5500PPBX8 No. 8 Nozzle700-65 5500PPBX12 No. 12 Nozzle700-66 5500PPBX18 No. 18Nozzle494

PUMPS & SPRAY EQUIPMENTNo. 23L GunNO. 23L FOR PRESSURES UP TO 250 P.S.I.NO. 23H FOR PRESSURES UP TO 1000 P.S.I.1 2 3 45 6 7 8 9 13 1410111218PART NO. DESCRIPTION700-1 Gunjet-250 P.S.I.700-110 Gunjet-1000 P.S.I.700-111 23L767624-24” Aluminum Extension151617DESIGNED SO THAT ONLY INLET BODY, CAP AND SPRAY TIP ARE TOUCHED BY SPRAY CHEMICALS... BRASS. 1/4" NPS (M)INLETCONNECTION. STRONG ALUMINUM ALLOY HANDLE. TEFLON VALVE SEAT AND PACKING AND STAINLESS STEEL VALVE STEM.WEIGHT- NO. 23L... 15 OUNCES.. FOR USE WITH ANY TEEJET SPRAY TIP...OR ADJUSTABLE CONEJETS AND MULTEEJETS.PART NO. ITEMBRASSCALL FOR PRICES AND AVAILABILITY ON PARTSDESCRIPTION700-1325700-27700-2700-603412*3* 456* 78910*1112131415161718CP1325-NPTP**CP7490-TEFCP7482-1-BR302SCP16052-NPCP7892-IZPCP14255-1-BUCP16071-SSCP8591-IZPCP7491-SSCP7480-IZPCP16053-1-302SSCP16054-1-ALCP7486-SSCP9539-INPCP14252-INPCP9697-SSCP8038-SS*AB23L*AB23L-SS*AB23HTIP RETAINER, BRASS, NICKEL PLATED OR STAINLESS STEELSPRAY TIP, BRASS OR STAINLESS STEELVALVE SEAT, BRASS AND TEFLON® FLUOROPOLYMER RESIN ORSTAINLESS STEEL AND TEFLON® FLUOROPOLYMER RESINMAIN STEM ASSEMBLY, TYPE 302 STAINLESS STEEL STEM WITH BRASSOR STAINLESS STEEL STEM GUIDEINLET BODY, BRASS, NICKEL PLATED OR STAINLESS STEELKEY, STEEL, ZINC PLATEDCUP PACKING, BUNA--NPACKING SCREW, BRASS, NICKEL PLATED OR STAINLESS STEELTRIGGER GUIDE, STEEL, ZINC PLATEDSPRING STUD, STAINLESS STEELSPRING SCREW, STEEL ZINC PLATEDMAIN SPRING, TYPE 302 STAINLESS STEELBODY, ALUMINUMLOCK NUT, STAINLESS STEELTRIGGER GUARD, STEEL, NICKEL PLATEDTRIGGER, STEEL, NICKEL PLATEDPAN HEAD SCREW, STAINLESS STEELRIVET, STAINLESS STEEL (2 REQUIRED)SPARE PARTS KIT-for 23LSPARE PARTS KIT-Stainless Steel for 23LSpare Parts Kit for 23HPUMPS & SPRAY EQUIPMENT**SPECIFY SPRAY TIP SIZE REQUIRED495

PUMPS & SPRAY EQUIPMENT43L & H Heavy Duty Trigger Control30L GUNJET SPRAY GUN-250 P.S.I. MAXThis gun has body and trigger molded of tough nylon designed to withstandrough treatment and high impact. Great for hand spraying or high-pressurewashing. Accomodates all interchangable Teejet spray tips. Also available1000 P.S.I.PART NO. TEEJET NO. DESCRIPTION700-105 30L 250 P.S.I. Gunjet700-106 3014 1000 P.S.I. Gunjet700-107 AB30L Repair Kit for GunjetBRASS ADJUSTABLE SPRAY TIPS-5500 SERIESKnurled body of tip rotates thru half turn to provide spray selection from awide angle, finely atomized cone spray to a straight stream spray. Tip deliversup to 2.7GPM. Fits Gunjets, valve bodies, and other spray guns withTeejet 11/16” thread.PART NO. TEEJET NO. PART NO. TEEJET NO.700-120 5500X2 700-121 5500X10700-31 5500X6 700-122 5500X12700-32 5500X8 700-123 5500X18PUMPS & SPRAY EQUIPMENTBRASS WAND EXTENSIONS7715 Series-250 P.S.I. MAX6671 Series-125 P.S.I. MAXFits Model 23L, 31 Gunjet & Trigger ValvesPART NO. TEEJET NO. DESCRIPTION700-41 7715-8 8” Straight Extension700-42 7715-18 18” Straight Extension700-43 7715-24 24” Straight Extension700-44 7715-30 30” Straight Extension700-45 7715-45 45” Straight ExtensionPART NO. TEEJET NO. DESCRIPTION700-124 6771-18 18” Curved Extension700-125 6671-24 24” Curved Extension700-74 6671-30 30” Curved Extension700-75 6671-36 36” Curved ExtensionHIGH PRESSURE BRASS WAND EXTENSIONS9527 SeriesFor pressures to1000 P.S.I. Fits models 23H and 31.PART NO. TEEJET NO. DESCRIPTION700-126 952724 24” Curved Extension withrubber cover.496

PUMPS & SPRAY EQUIPMENT43L & H Heavy Duty Trigger Control43L & H HEAVY DUTY TRIGGER CONTROLPART NO.700-4700-7700-55700-127700-128700-1325700-5005700-6014DESCRIPTION43L 22” BRASS LOW PRESSURE SPRAY GUN43H 22” BRASS HIGH PRESSURE SPRAY GUN43LA 13” BRASS LOW PRESSURE SPRAY GUN43LAL 22” ALUM. LOW PRESSURE SPRAY GUN43HAL 22” ALUM. HIGH PRESSURE SPRAY GUN1325 BRASS CAPD6 ORIFICE DISCCP6604 22” BRASS BARRELLQuality designed and buitl for heavy-duty service. Stemextendsthrough extention to valve seat located directly behindorfice disc for drip-free shut-off and instant operating response.Convenient trigger locks for continuious spraying. Trigger isextra long for easy four-finger control. Hardened stainless steelType D orifice disc supplied with No. 6 orifice disc. Disc arecorrosion and erosion resistant. Exposed packing nut.. foreasy adjustment of packing.NO. 43L FOR OPERATING PRESSURES UP TO 200 P.S.I.NO. 43H FOR OPERATING PRESSURES UP TO 800 P.S.I.PART NO.700-1325700-6004700-6005700-6022700-6030700-6014700-6007700-6008700-5700-129TEM123* 45* 67891010* 11* 12131415161718192021222324252627282930BRASSCP1325D- **CP4743-NYCP1056610565CP10571CP6943-ALCP19238-416SSCP6604CP6492CP6492ALCP6601-302SSCP6602-LEACP6602-TEFCP19237CP6599CP9641-INPCP6595-SSCP7991-IZPCP6597-INPCP6591-SSCP6589-IZPCP6594-SSCP6588-IZPCP6592-302SSCP6593-1-SSCP6593-2-SSCP14477-1-ALCP7623-IZPCP6509-INPCP6510-INPCP11757-INPCP13798-INP*AB43-KIT*AB43AL-KIT(NO. 43-)BRASS CONSTRUCTION TO MEETALL FARM SPRAYING NEEDS.1 2 4 5 637 9 8 710CALL FOR PRICES ANDAVAILABILITY ONPARTSSPARE PARTS KIT**SPECIFY ORIFICE DISC SIZE1211 13 15 16 17 1819 20 21 22 23 24DESCRIPTIONCAP, BRASSORIFICE DISC, HARDENED STAINLESS STEELGASKET, NYLONNOZZLE HOUSING, BRASSSEAT PLUG, SEAT PLATE, WASHER & CORE SUB-ASB.GUIDE VANE, BRASSGASKET, ALUMINUM (2 REQUIRED)STEM, TYPE 416 STAINLESS STEELBRASSINLET BODY, BRASSINLET BODY, ALUMINUMPACKING WASHER, TYPE 302 STAINLESS STEELPACKING, LEATHER (3 REQUIRED)PACKING, TEFLON (3 REQUIRED)PACKING SCREW,LOCKNUT, BRASSSTEM NUT, STEEL-NICKEL PLATEDTRIGGER STOP SPRING, STAINLESS STEELWASHER, STEEL-ZINC PLATEDTRIGGER GUIDE, STEEL-NICKEL PLATEDSPRING STUD, STAINLESS STEELSTOP ADJUSTMENT NUT, STEEL-ZINC PLATEDSPRING FOR STOP ADJUSTMENT NUT, STAIN. STEELSPRING SCREW, STEEL-ZINC PLATEDSPRING GUIDE WASHER, TYPE 302 STAIN. STEELMAIN SPRING, STAIN. STEEL (FOR MODEL #43L-)MAIN SPRING, STAIN. STEEL (FOR MODEL #43H-)HANDLE BODY, ALUMINUMRIVET, STEEL-ZINC PLATED (2 REQUIRED)TRIGGER, STEEL-NICKEL PLATEDTRIGGER STOP, STEEL-NICKEL PLATEDSCREW, STEEL-NICKEL PLATEDTRIGGER GUARD, STEEL-NICKEL PLATEDSPARE PARTS KIT28302729142625PUMPS & SPRAY EQUIPMENT497

PUMPS & SPRAY EQUIPMENT143 ALGH SpraygunGUNJET ROTATING HANDLE SPRAYGUNSFor spot spraying, tree spraying, livestock spraying and power washing at pressurefrom 30 to 800 P.S.I. Sprayguns are operated by rotating handle 360° from shutoff tomaximum flow position. As handle is turned, spray changes from initial cone spray to intermediate conespray to straight stream. Spray tips are interchangable orifice discs made of corrosion resistant hardenedstainless steel. Guns are available in both brass and aluminum.12 Series: Brass Construction- No. 6 orifice disc. 3/4” Female Garden Hose InletPART NO. TEEJET NO. DESCRIPTION700-130 AA12A-6 16” Length700-131 AA12-6 20” Length700-132 AB12A Repair Parts Kit700-133 CP5871BU Tip Gasket2 Series: Same as 12 series except uses hardened stainless steel nozzles insteadof orifice disc. 3/4” Female Garden Hose Inlet. Available in brass and aluminum construction.PUMPS & SPRAY EQUIPMENTPART NO. TEEJET NO. DESCRIPTION700-140 2AAL45 15” Aluminum700-141 2AL45 20” Aluminum700-142 245 24” Brass700-143 AYHSS45 No. 45 SS Nozzle143 Series: Lightweight Aluminum Standard Duty Spray Gun that has approximately thesame performance as the 12 series. Supplied with No. 6 stainless steel orifice disc.Female Garden Hose Inlet. Weight only 1 1/4 lbs.PART NO. TEEJET NO. DESCRIPTION700-13 143ALGH6 22 1/4” Aluminum700-1327 CP1325AL AluminumCap for tip700-5005 D-6 No.6 Stainless orifice700-6085 CP4743NY Nylon gasket for cap700-6009 CP10566AL Aluminum Nozzle Housing700-6032 AB143AL Repair Parts Kit498

PUMPS & SPRAY EQUIPMENTDirectovalve Solenoid-OperatedDIRECTO VALVES2-WAY ELECTRICALLY OPERATEDSOLENOID VALVESDirect acting large internal flow chamber without pilot hole reduces chance of clogging. Stainlesssteel wetted parts provide additional corrosion resistance. 12 V DC system. Max pressure 100PSI. Solenoid coil can be changed without removing valve from system. Valves are designed forremote on-off boom control.Model 144A10 GPM flow with only 5 PSI pressure dropTwo ¾” NPTF inlet connections- ½” NPTF outletAdjustable solenoidEPDM seat washer and diaphragm standard- also available in VitonMAP NO. TEEJET NO. DESCRIPTION700-401 144A1 Single valve with EPDM seat/diaphragm700-405 144A3 Triple valve with EPDM seat/diaphragm700-407 144A3VI Triple valve with Viton seat/diaphragm114AIModel 144P10 GPM flow with only 5 PSI pressure dropTwo ¾” NPTF inlet connections- ½” NPTF outletSolenoid requires no adjustmentHeavy duty stainless steel coilViton seat washer and diaphragmEasy slide-on mount using hex boltMAP NO.700-495Model 145H-115 GPM flow with only 5 PSI pressure drop1” Inlet and outlet portsFiberglass reinforced nylon bodyCan be ganged with other 145H valvesHeavy DutyMAP NO.700-406144P145H-1144A3144A3VI3-WAY ELECTRICALLY OPERATED METERED BY-PASS VALVEAutomatically maintains system pressure when one or more boom sections are shut offFor pressures up to 65 PSI8 GPM at only 5 PSI pressure dropEPDM seat washer and diaphragm¾” Flow thru connections with ½” outlet to spray lineMAP NO.700-408 144A1-3PUMPS & SPRAY EQUIPMENT144A1-3499

PUMPS & SPRAY EQUIPMENTDirectovalve Control Valves Repair PartsDIRECTOVALVE CONTROL VALVE REPAIR PARTSPART NO. TEEJET NO.DESCRIPTIONPUMPS & SPRAY EQUIPMENT700-404700-415700-414700-416700-417700-418700-409700-445700-446700-448700-449700-450700-447700-452700-453700-458700-457AB144-1AB144-1VIAB144A-1AB144A-1VIAB144P-1AB145-HAB145-VICP14801-PPCP14801-NYCP14802-EPRCP14818-EPRCP154818-VICP15163-NYBCP36101-EPRCP36101-VICP18605-NYBCP186011-NYBSWIVELCONNECTORSFREE-SWIVELING,LEAK PROOFCONNECTORS.PART NO. SIZE700-26 1/4" FEMALEX 3/8" HOSE BARBRepair Parts Kit for 144-1 EPDM (Old Style)Repair Parts Kit for 144-1 VITON (Old Style)Repair Parts Kit for 144A-1 EPDMRepair Parts Kit for 144A-1VI VITONRepair Parts Kit for 144A-1VP VITONRepair Parts Kit for 145H-1 EPDMRepair Parts Kit for 145H-1 VITONPOCU Valve Body for 144 & 144ACoil Assembly for 144Seat Washer for 144 & 144AEPDM Rubber Diaphragm for 144VITON Rubber Diaphragm for 144COIL Assembly for 144AEPDM Diaphragm for 144A (2 Required)VITON Diaphragm for 144A (2 Required)Coil Assembly for 145Nylon Body for 145NYLON PRESSURE RELIEF VALVEPART NO.700-6160DESCRIPTIONNylon pressure relief valve with brass T-handle and stainlesssteel spring. 0-250 psi. 3/4" NPT male and female ports.110 SERIES PISTON TYPE PRESSURE RELIEF VALVES• Ductile iron construction• Removable bonnet for servicing unitwithout removing valve from line• 1" or 1 ¼" pipe connection• 150 P.S.I. max pressureNO. 4676 TEEJETOUTLETADAPTERSPART NO. TEEJET NO. SIZE700-533 1101D1 1"700-534 110114D1 1 ¼"PART NO. MATERIAL OUTLETCONN. N.P.T. (F)700-28 BRASS 1/4"700-29 NYLON 1/4"FITS THE OUTLETS OFTEEJET NOZZLE BODIES...AS WELL AS THE OUTLETSOF NO. 23 AND 31 GUNJETSAND TRIGGER TEEJETVALVES. REPLACES 1325TEE-JET CAP. USED FORATTACHING DROP PIPES TONOZZLES...OR EXTENSIONSTO SPRAY GUNS.500

PUMPS & SPRAY EQUIPMENTSprayer Control KitsThrottling ValvesMODEL 17 Y TEEVALVESelective control of 3-section boomsprayers at pressures to 300 P.S.I.• ¾" Side connection for by-pass and pressure reliefvalve or spray gun.• Valve used to open any of 3-boom section lines inany combination.• ¾" or 1" inlet- three ¾" outlets.• Aluminum construction with stainless steel andplastic internal parts for maximum corrosionresistance.PART NO. TEEJET NO. DESCRIPTION700-312 AA17L ¾" Inlet w/ ¾" Outlets700-324 AA17Y 1" Inlet w/ ¾" Outlets700-325 AB17 Parts Repair Kit700-326 CP12126AL Alum. Cover Plate700-327 CP121281ZP Selector Shield700-328 CP68491ZP Selector HandleMODEL 12795 THROTTLING VALVE-BRASSSame application as 23520except brass constructionand 1" NPT connections.Maximum flow rate of 116GPM at 40 P.S.I.PART NO. TEEJET NO.700-531 12795-1MODEL 12690 THROTTLING VALVE-NYLONSame application as 23520except nylon construction.Maximum flow rate of 82 GPM.MODEL1269034NYMODEL12795PART NO. TEEJET NO. DESCRIPTION700-530 1269034NY Valve700-532 AB12690 Repair KitMODEL 6BPressure to 150 P.S.I. 12 G.P.M.at 5 P.S.I.• Molded corrosion-resistant materialsof polypropylene, stainless steel& polyethylene• Molded-in mount• ¼" NPT gauge port• Can be multiple-configured by using¾" hex nipplesPART NO. TEEJET NO. DESCRIPTION700-391 6B Directo Valve700-382 CP36301NY Nylon Handle700-392 AB6B Parts Repair KitTHROTTLING VALVESFor regulating flow in systemsequipped with centrifugal pumps wheresensitive regulation is required, or tocontrol flow in jet agitation lines.Pressures to 150 psi.MODEL 23520PART NO.700-528700-529TEEJET NO.23520-1/26GPM MAX23520-3/418GPM MAXDESCRIPTION1/2" POLYTHROTTLING VALVE3/4" POLYTHROTTLING VALVEMODEL 344AE-2 ELECTRIC BALL VALVEThese nylon valves provide smooth regulationand shut-off control. Work with teejet sprayercontrollers and other 12V systems.• Maximum pressure 300 P.S.I.• Available ¾" or 1" NPT female connections• 5 P.S.I. pressure drop at 12 G.P.M.• 1 Amp power consumptionPART NO. TEEJET NO. DESCRIPTION700-428 344AE-234 ¾" NPT- Valve700-429 344AE-21 1" NPT-Valve700-426 344AEC-234 ¾" NPT- Valve-*700-427 344AEC-21 1" NPT-Valve-*700-424 344AE-2-PR1 1" NPT-Valve-**700-203 AB344AE Repair Kit for344 Valves* Compatible with all sprayer controls** Pressure regulating designMODEL 344AEPUMPS & SPRAY EQUIPMENT501

PUMPS & SPRAY EQUIPMENTRelief ValvesMODEL 244CPISTON TYPEPRESSURE RELIEF/REGULATING VALVESMODEL 6815RELIEF VALVES244-3/4 remote control electricRegulating valve. Providesremote pressure control. For 12vdc system. When wide open,pressure loss of only 1 PSI for20 gpm flow. Max. Pressure 100PSI. Good corrosion resistance.Wetted parts are stainless steel,nylon, celcon and viton. 3/4" npt(f) conn. Low current draw...Normally less than 0.1PART NO. TEEJET NO.700-441 244C700-442 AB244C-Repair Kit• BRASS WITH STAINLESSSTEEL SPRINGS• CHOICE OF 1/2" OR 3/4" NPT (M) INLETAND (F) OUTLET CONNECTIONS.23120 SERIESPiston type pressure relief/ regulatingvalve Bypasses excess liquid. Adjustableto maintain control of line pressure.Locknut firmly holds pressure setting.Handles large flows.• Stainless steel spring• Excellent chemical resistance• ¼" Port for pressure gauge• Polypropylene constructionPART NO. TEEJET NO. SIZE700-535 2312012PP ½"700-536 2312034PP ¾"SWIVEL CONNECTORSFOR USE WITH ALL INTERCHANGEABLESPRAY TIPSTYPE 5000SINGLE SWIVEL NOZZLEPART NO.700-1054700-1053DESCRIPTIONSINGLEDOUBLEBRASSINLET1/4" FPT1/4" FPTTYPE 4202DOUBLE SWIVEL NOZZLEOUTLETTEEJETTHREADTEEJETTHREADTEEJET NO.5000-14T4202-214TPUMPS & SPRAY EQUIPMENTPART NO. TEEJET NO. DESCRIPTION700-451 6815-12-300 ½"- 300 PSI Valve700-454 6815-34-300 ¾"- 300 PSI Valve700-456 6815-34-700 ¾"- 700 PSI Valve700-6023 AB6815300 Repair Kit for Brass- 300 PSI700-6025 AB6815700 Repair Kit for Brass- 700 PSI700-6024 AB6815AL300 Repair Kit for Alum- 300 PSIDIAPHRAGM TYPEPRESSURE RELIEF/REGULATING VALVESBYPASSES EXCESS LIQUID. CHOICE OF 1/2" AND3/4" NPT SIZES. CHEMICAL RESISTANT IAPHRAGMSEALS OFF OPERATING PARTS FROM CONTACTWITH CHEMICALS. REMAINS RESILIENT FOR CHAT-TER-FREE, RESPONSIVE PRESSURE CONTROL.MODEL 8460NYLON INLET BODY WITH ALUMINUMBONNET. CHOICE OF 1/2" OR 3/4" NPT (M)INLET AND (F) OUTLET CONNECTIONS.FLOW RATES AT 56 GPM FOR 1/2" SIZEAND TO 70 GPM FOR 3/4" SIZE.PRESSURES TO 50 AND 300 P.S.I.PART NO. TEEJET NO. DESCRIPTION700-471 846012 ½" Nylon-Alum Valve700-472 846034 ¾" Nylon-Alum Valve700-476 CP836134NY ¾" Nylon Body700-477 CP836112NY ½" Nylon Body700-473 AB8460 Parts Repair KitTYPE 8600 NYLONSINGLE SWIVEL NOZZLEPART NO. DESCRIPTION700-1062700-1064SINGLEDOUBLESPLIT EYELETSPRAY NOZZLESNYLONINLET1/4" FPT1/4" FPTTYPE 8600-2 NYLONDOUBLE SWIVEL NOZZLEOUTLETTEEJETTHREADTEEJETTHREADFast, easy way to mount spray nozzlesto wet booms. Available for mounting on½", ¾", or 1" dia. pipe.PART NO. TEEJET NO. BOOM SIZE MATERIAL700-1101 742112T ½" Brass700-1105 742134T ¾" Brass700-1109 74211T 1" Brass700-1110 742112TNYB ½" Nylon700-1111 742134TNYB ¾" Nylon700-1112 74211TNYB 1" Nylon700-1119 CP7418BU BUNA-N GasketTEEJET NO.860014TNYB8600214TNYB502

PUMPS & SPRAY EQUIPMENTTeejet-Hose Shank NozzlesNozzle BodiesNozzle CapsNOZZLE BODIESTHE 1/4TT AND 1/4T TEEJET NOZZLESHAVE 1/4" NPT INLET CONNECTIONS.HOSE SHANK NOZZLESWITH LOCKNUTBRASSSINGLE HOSEDOUBLE HOSECONNECTION CONNECTIONPART NO.700-1302700-1303700-1307TEEJETBODY NO.13228028-NY1340TYPE-TTMALE INLETCONNECTIONFOR TEEJETNOZZLETYPE1/4TT1/4TT-NY1/2 TTMALENPTSIZE14"1/4"1/2"MATERIALBRASSNYLONBRASSPART NO.700-1169700-1142700-1152700-1143700-115315427296HOSE SIZE1/4”3/8"3/8"1/2"1/2"6471A9191ASTYLESTELLTEEELLTEE6472A9192ATEEJET. NO.154272966471-4006472-4009191A-5319192A-531PART NO.700-1310700-1311700-1312TEEJETBODY NO.1335132112094-NYBTYPE - TFEMALE INLETCONNECTIONFOR NOZZLETYPE1/8T1/4T1/4TFEMALENPT SIZE1/8" BRASS1/4" BRASS1/4" NYLON12670406TDNYLON8121-NY122018120-NY12202)PART NO. HOSE SIZE STYLE TEEJET NO.700-1170 3/8" ST 12670406TD700-1165 3/8" TEE 8120NY406TD700-1166 ½" TEE 8120NY540TD700-1161 3/8" ELL 8121NY406TD700-1162 ½" ELL 8121NY540TD700-1190 ¾" ELL 12201CE785TD700-1192 ¾" TEE 12202CE785TD700-1191 1" ELL 12201CE1062TD700-1193 1" TEE 12202CE1062TD804-490 Nylon Replacement LocknutPLUG TIPSPART NO. TEEJET NO. MATERIAL700-1339 CP3942 Brass700-1340 CP3942SS StainlessPLUG TIPSNO. 3942 PLUG TIP...TO TEMPORARILY SHUTOFF SELECTED NOZZLES, MERELY BY REPLACINGSPRAY TIPS WITH THESE PLUG TIPS. EASY, QUICKWAY TO CHANGE SPACING OF OPERATING NOZZLESON BOOM. SOLD IN QUANTITIES OF 5.503PART NO.700-1325700-1331700-1326700-1332*700-1333*FOR CERAMIC TIPS700-1325700-1326700-1331700-1333NO. 111PART NO.700-1001700-1002700-1003700-1004700-1006700-1007700-1008NOZZLE CAPSSOLD IN QUANTITIES OF 5TEEJET CAP NO.13251325-SS8027-NY18032A-NYB1333SOLD INQUANTITIES OF 5.FITS TUBE SIZE1/2"RD3/4"RD1"RD1 1/4"RD1" SQ1 1/4" SQ1 1/2" SQMATERIALBRASSSTAINLESS STEELNYLONNYLONBRASS700-1332CLAMP SUB-ASSEMBLIES FOR VARI-SPACINGNOZZLES. CONSIST OF UPPER AND LOWERCLAMPS AND BOLT.NO.111SQTEEJET NO.111-1/2111-3/4111-1111-1 1/4111SQ-1111-SQ 1 1/4111-SQ 1 1/2FITS ALLTEEJETBODIESPUMPS & SPRAY EQUIPMENT

PUMPS & SPRAY EQUIPMENTStandard Strainers, Teejet Slotted StrainersCheck Valve StrainersHose Drop, Row ApplicatorSTANDARD STRAINERSSTRAINER IS THREE PART ASSEMBLYCONSISTING OF BRASS BODY, CAP ANDSTAINLESS STEEL SCREEN. SOLD IN QUANTITIES OF 5.PART NO.700-1341700-1342700-1343700-1372700-1373PART NO.700-1351700-1352TEEJET NO.5053-505053-1006051-SS-508079-PP-508079-PP-100TEEJET SLOTTED STRAINERSONE-PIECE STRAINERS FOR USE WITHLIQUIDS CONTAINING SUSPENDEDSOLIDS.SOLD IN QUANTITIES OF 5.CHECK VALVE STRAINERSNO. 4193A TEEJETSTRAINER AND CHECK VALVEMATERIALBrassBrassStainlessNylonNylonDESCRIPTION50 Mesh Screen Only100 Mesh Screen OnlyPART NO. TEEJET NO. MATERIAL MESH700-1347 4514-10 Brass 50700-1348 4514-20 Brass 25700-1349 4514-32 Brass 16700-1356 4514NY10 Nylon 50700-1357 4514NY20 Nylon 25700-1358 4514NY32 Nylon 16MESH501005050100TEEJET HOSE SHANKSFITS ALL TEEJET NOZZLES, REPLACING SPRAYTIPS. FOR ATTACHING HOSE TO NOZZLEBODY. TYPE 8400 IS MADE OF NYLON.NYLONPART NO. SIZE TEEJET NO.700-1114 3/8" 8400-406-NYB700-1027 1/2" 8400-500-NYBBRASS700-1320 3/8" 4251-375700-1321 1/2" 4251-500ROW APPLICATORPUMPS & SPRAY EQUIPMENTPREVENTS NOZZLE DRIPPING...FITS ALL TEEJETNOZZLES. BALL CHECK OPENS AT 5 OR 10 P.S.I.BRASS OR POLY BODY AND STAINLESS STEELSCREEN- SOLD IN QUANTITIES OF 5PART NO.700-1361700-1362700-1363700-1364700-1365700-1366TEEJET NO.4193A-5-50SS4193A-5-100SS4193A-PP-5-50SS4193A-PP-5-100SS4193A-PP-10-50SS4193A-PP-10-100SSMATERIALBrassBrassPolyPolyPolyPolyHOSE DROPSFOR USE WITH STANDARD TEEJET11/16-16 Teejet inlet x ¼ NPTM outletPART NO. TEEJET NO. LENGTH700-4106 21354-15 15"700-4107 21354-24 24"MESH501005010050100Features:• Arms adjustable for length and angle withoutremoving bolts; simply loosen• Available with nylon or stainless steel arms• Positioning one arm at proper angleautomatically sets correct angle of second arm• Fits square or round booms up to1-1/2" diameter• Kit adapts to standard or Quick TeeJetnozzle bodies• Side nozzle bodies may be rotated• Maximum pressure 125 psiPART NO.700-22MFG. No.23770504

PUMPS & SPRAY EQUIPMENTDiaphram Check ValvesCHEMSAVER DIAPHRAGM CHECK VALVESThese nozzle bodies eliminate pressure drop associated with ball-type checkvalves. Widely used wherever drip-free shutoff is required.Available in brass & nylon- polypropylene materials.BRASS• Check valve opens at 7 P.S.I.• 11/16” Teejet male thread outlet• 1/8" NPT female inlet• Up to 1.5 GPM flow ratePART NO. TEEJET NO. INLET700-1710 4664B 1/8" NPT femaleNYLON• Check valve opens at 10 P.S.I.• 1/8" or ¼" NPT female inlet• 11/16" Teejet male thread outlet• Up to 2.5 GPM flow ratePART NO. TEEJET NO. INLET SIZE700-1715 835518NYB 1/8" NPT female700-1716 835514NYB ¼" NPT femaleNYLON• Check valve opens at 10 P.S.I.• ¼" NPT male inlet• 11/16" Teejet male thread outlet• Up to 2 GPM flow ratePART NO. TEEJET NO. INLET SIZE700-1720 8360NYB ¼"NPT MaleSPRAYER CONTROL KITSThe 734 and 744 Spraying Systems control kits are designed as completepackages to give the operator easy and accurate control of the sprayer. Kitsinclude controller with long-lasting switches, valves, gauges, and all necessarycables and mounting hardware. Additional LED illuminated panel on 744series. Kits are packaged in attractive display carton.REPLACEMENT PARTS FORDIAPHRAGM CHECK VALVESPART NO. DESCRIPTION700-1704 CP4620VI- Diaphragm- 4664B700-1707 CP4620FA- Diaphragm- 4664B700-1701 CP21953EPR- Diaphragm- Nylon Valves700-1706 CP21953VI-Diaphragm- Nylon Valves700-1705 2195010NYB-End Cap Sub Assbly- 10 PSISpring- Nylon700-1702 2195010PPB-End Cap Sub Assbly- 10 PSISpring- PolyPART NO. TEEJET NO. DESCRIPTION700-430 K73130D No. 734 Controller for 3 Booms with 1No. 244 Pressure Regulating Valve700-431 K73133D No. 734 Controller for 3 Booms with 3No. 144 Directo Valves and 1 No.244 Pressure Regulating Valve700-432 K74110D No. 744 Controller for 1 Boom with 1 No.244 Pressure Regulating Valve700-433 K74110L No. 744 Controller for 1 Boom with 1 No. 244 Pressure Regulating Valve andLiquid Filled Pressure Gauge700-434 K74130D No. 744 Controller for 3 Booms with 1 No. 244 Pressure Regulating Valve700-436 K74111L No. 744 Controller for 1 Boom with 1 No. 144 Directo Valve, 1 No. 244 PressureRegulating Valve, and Liquid Filled Pressure Gauge700-437 K74133L No. 744 Controller for 3 Booms with 3 No. 144 Directo Valves, 1 No. 244Pressure Regulating Valve, and Liquid Filled Pressure GaugePUMPS & SPRAY EQUIPMENT505

PUMPS & SPRAY EQUIPMENTPolypropylene Switch-A-RooPUMPS & SPRAY EQUIPMENTBanjo Polypropylene Switch-A-Roos• The Switch-A-Roo is a fast convenient method of changingspray nozzles on fertilizer application equipment.• Precision molded in polypropylene (fiberglass reinforced)for high strength and toughness.• The female coupling is available in either 1/2" or 3/4" pipethread and normally mounted on the spray boom.• The male adapter is available in four different thread sizes1/4", 3/8", 1/2" & 3/4" to fit all size spray nozzles.• Switch-A-Roos available with self-aligning grooves.MAP No. Mfg.No. Description314-5673 75A-1/4SA 3/4" Male Adapter-1/4" w/Self-Aligning Groove314-5674 75A-3/8SA 3/4" Male Adapter-3/8" w/Self-Aligning Groove314-5675 75A-1/2SA 3/4' Male Adapter-1/2" w/Self-Aligning Groove314-5676 75A-3/4SA 3/4" Male Adapter-3/4" w/Self-Aligning Groove314-5677 75A-1/4 3/4" Male Adapter-1/4" Female Thread314-5678 75A-3/8 3/4" Male Adapter-3/8" Female Thread314-5679 75A-1/2 3/4" Male Adapter-1/2" Female Thread314-5680 75A-3/4 3/4" Male Adapter-3/4" Female Thread314-5681 75B-1/2 3/4" Female Coupler- 1/2" Male Thread314-5682 75B-3/4 3/4" Female Coupler- 3/4" Male Thread506

PUMPS & SPRAY EQUIPMENTSpray Tip Chart• Uniform coverage at lowerpressures• Smaller droplets at highpressures for thorough coverage• Nozzle spacing - 20 inches• Spraying pressure - 15-60 p.s.i.• Good spray penetration• Uniform coverage along boom• Nozzle spacing - 20 inches• Spraying pressure - 30-60 p.s.i.• Uniform coverage along boom• Pre-orifice design produceslarge droplets to reduce drift• Nozzle spacing - 30-40 inches• Spraying pressure - 10-40 p.s.i.• Less clogging• Larger droplets at lowpressures• Nozzle spacing - 40 inches• Spraying pressure - 10-25 p.s.i.• Ideal for banding over the rowor in row middles• Uniform coverage acrossspray pattern• Spraying pressure - 20-40 p.s.i.• Ideal for banding herbicides &insecticides with 3 nozzles overthe row• Small droplets• Spraying pressure - 40-60 p.s.i.PUMPS & SPRAY EQUIPMENT• Large round free passages to minimize clogging• Excellent to use with automatic sprayer controls• Excellent spray pattern quality• Unequalled drift control from 15-90 PSI (1-6 bar)-- SEE CHART ON NEXT PAGE FOR SPRAY TIP SELECTION --507• Large, air-filled drops• Larger droplets for less drift• Uniform coverage in broadcast spraying• Nozzle spacing - 20 inches (50 cm)• Spraying pressure - 30-100 PSI (3-8 bar)

PUMPS & SPRAY EQUIPMENTSpray Tip Selection ChartSPRAY TIPSELECTION CHARTXR TEEJETEXTENDED RANGE FLAT TIPSOILINCORPORATEDGOODHERBICIDESPRE-EMERGE POST-EMERGE BANDCONTACT SYSTEMICEXCELLENT GOOD EXCELLENTTEEJETSTANDARD FLAT SPRAY TIPGOODGOODGOODTURBO FLOODJETWIDE ANGLE FLAT SPRAY TIPEXCELLENTEXCELLENTFLOODJETWIDE ANGLE FLAT SPRAY TIPGOODTEEJETEVEN FLAT SPRAY TIPCONEJETHOLLOW CONE SPRAY TIPEXCELLENTGOODEXCELLENTTURBO TEEJETWIDE ANGLE FLAT SPRAY TIPEXCELLENTEXCELLENTEXCELLENTEXCELLENTAI TEEJETAIR INDUCTION SPRAY TIPXR TEEJETEXTENDED RANGE FLAT TIPCONTACTEXCELLENTEXCELLENTFUNGICIDESSYSTEMICEXCELLENTEXCELLENT GOODINSECTICIDESCONTACT SYSTEMICGOOD EXCELLENTEXCELLENTGROWTHREGULATORSPUMPS & SPRAY EQUIPMENTTEEJETSTANDARD FLAT SPRAY TIPTURBO FLOODJETWIDE ANGLE FLAT SPRAY TIPFLOODJETWIDE ANGLE FLAT SPRAY TIPTEEJETEVEN FLAT SPRAY TIPGOODGOODEXCELLENTEXCELLENTGOODEXCELLENTEXCELLENTCONEJETHOLLOW CONE SPRAY TIPGOODEXCELLENTGOODTURBO TEEJETWIDE ANGLE FLAT SPRAY TIPGOOD(AT MEDIUMPRESSURE)EXCELLENTGOOD(AT MEDIUMPRESSURE)EXCELLENTAI TEEJETAIR INDUCTION SPRAY TIPEXCELLENTEXCELLENT508

PUMPS & SPRAY EQUIPMENT80° Flat Spray Tips110° Flat Spray TipsALL SPRAY TIPS SOLD IN QUANTITIES OF 5Teejet number designates 1/10 of a gallon output at 40 P.S.I.Example:8001= 1/10 Gallon8010=1 GallonVISIFLOW FLAT SPRAY TIPSFlat spray pattern tip with tapered edge for uniform coverage in broadcast spraying.Spray tips packaged in quantities of 5.Stainless Steel with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 110° (1100 Series)TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8001VS ORANGE 700-2981 TP11001VS ORANGE 700-2351TP80015VS GREEN 700-2982 TP11002VS YELLOW 700-2353TP8002VS YELLOW 700-2983 TP11003VS BLUE 700-2354TP8003VS BLUE 700-2984 TP11004VS RED 700-2355TP8004VS RED 700-2985 TP11005VS BROWN 700-2356TP8005VS BROWN 700-2986 TP11006VS GRAY 700-2357TP8006VS GRAY 700-2987 TP11008VS WHITE 700-2358TP8008VS WHITE 700-2988Solid Stainless Steel last up to ten times longer than brass.Stocked in 80° (8000 Series)-Discontinued when stock is depleted.TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001SS 700-2216 TP8005SS 700-2227TP80015SS 700-2223 TP8006SS 700-2228TP8002SS 700-2224 TP8008SS 700-2229TP8003SS 700-2225 TP8010SS 700-2230TP8004SS 700-2226Polymer with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 110° (1100 Series)TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8002VP YELLOW 700-2253 TP11002VP YELLOW 700-2322TP8003VP BLUE 700-2254 TP11003VP BLUE 700-2323TP8004VP RED 700-2255 TP11004VP RED 700-2324TP8005VP BROWN 700-2256 TP11005VP BROWN 700-2325TP8006VP GRAY 700-2257 TP11006VP GRAY 700-2326TP8008VP WHITE 700-2259 TP11008VP WHITE 700-2328PUMPS & SPRAY EQUIPMENT509

PUMPS & SPRAY EQUIPMENT80° Flat Spray Tips95° Flat Spray Tips110° Flat Spray TipsVISIFLOW FLAT SPRAY TIPSSolid Brass- Stocked in 25° (2500 Series), 80° (8000 Series), 95° (9500Series), and 110° (1100 Series).TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP2502 700-2054 TP9502 700-2443TP2503 700-2055 TP9503 700-2444TP800050 700-2215 TP9504 700-2445TP8001 700-2202 TP9505 700-2446TP80015 700-2203 TP9506 700-2447TP8002 700-2204 TP9508 700-2448TP8003 700-2205 TP11001 700-2302TP8004 700-2206 TP11002 700-2304TP8005 700-2207 TP11003 700-2305TP8006 700-2208 TP11004 700-2306TP8008 700-2209 TP11005 700-2307TP8010 700-2210 TP11006 700-2308TP9501 700-2441 TP11008 700-2309VISIFLOW EVEN SPRAY TIPSPUMPS & SPRAY EQUIPMENTStainless Steel with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 95° (9500 Series)Priced Individually...Sold in Quanities of 5.TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8001EVS ORANGE 700-2941 TP8006EVS GRAY 700-2947TP8001.5EVS GREEN 700-2942 TP8008EVS WHITE 700-2948TP8002EVS YELLOW 700-2943 TP9501.5EVS GREEN 700-3023TP8003EVS BLUE 700-2944 TP9502EVS YELLOW 700-3024TP8004EVS RED 700-2945 TP9503EVS BLUE 700-3025TP8005EVS BROWN 700-2946Solid Stainless Steel- last up to 10 times longer than brass- stocked in80° (8000 Series). Priced Individually...Sold in Quanities of 5.This series to be discontinued when stock is depleted.TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001ESS 700-2921 TP8005ESS 700-2926TP8001.5ESS 700-2922 TP8006ESS 700-2927TP8002ESS 700-2923 TP8008ESS 700-2928TP8003ESS 700-2924 TP8010ESS 700-2929TP8004ESS 700-2925510

PUMPS & SPRAY EQUIPMENTVisiflow EvenDrift GuardVISIFLOW EVEN SPRAY TIPSSolid Brass- stocked in 80° (8000 Series) and 95° (9500 Series).TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001E 700-2901 TP8010E 700-2909TP8001.5E 700-2902 TP9501E 700-3002TP8002E 700-2903 TP9502E 700-3003TP8003E 700-2904 TP9503E 700-3004TP8004E 700-2905 TP9504E 700-3005TP8005E 700-2906 TP9505E 700-3006TP8006E 700-2907 TP9506E 700-3007TP8008E 700-2908 TP9508E 700-3008DRIFT GUARD SPRAY TIPSStainless Steel Core-VisiFlow Color-Coded BodyTips produce large droplets to reduce drift. Tapered edge flat spray pattern.Color-coded pre-orifice is removable for cleaning operation.Stocked in 80° and 110° flat spray pattern and 95° even spray pattern.TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.DG8001.5VS GREEN 700-2281 DG9503EVS BLUE 700-2314DG8002VS YELLOW 700-2282 DG9504EVS RED 700-2315DG8003VS BLUE 700-2283 DG11001.5VS GREEN 700-2289DG8004VS RED 700-2284 DG11002VS YELLOW 700-2290DG8005VS BROWN 700-2285 DG11003VS BLUE 700-2291DG9501.5EVS GREEN 700-2312 DG11004VS RED 700-2292DG9502EVS YELLOW 700-2313 DG11005VS BROWN 700-2293PUMPS & SPRAY EQUIPMENT511

PUMPS & SPRAY EQUIPMENT“XR” Extened Range Flat Stainless Steel“XR” Extened Range Flat Ceramic Core"XR" EXTENDED RANGE FLAT SPRAY TIPSStainless Steel CoreVisi-Flow Color-Coded Body• Excellent spray distribution over a wide range of pressures (15-60 PSI)• Ideal for rigs equipped with sprayer controllers• Reduces drift at lower pressures- better coverage at higher pressuresTEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.XR8001VS ORANGE 700-2240 XR11001VS ORANGE 700-2341XR80015VS GREEN 700-2241 XR110015VS GREEN 700-2342XR8002VS YELLOW 700-2242 XR11002VS YELLOW 700-2343XR8003VS BLUE 700-2243 XR11003VS BLUE 700-2344XR8004VS RED 700-2244 XR11004VS RED 700-2345XR8005VS BROWN 700-2245 XR11005VS BROWN 700-2346XR8006VS GRAY 700-2246 XR11006VS GRAY 700-2347XR8008VS WHITE 700-2247 XR11008VS WHITE 700-2348PUMPS & SPRAY EQUIPMENT"XR" EXTENDED RANGE FLATSPRAY TIPS CERAMIC CORECeramic Core- Visi-Flow Color-Coded Body• Excellent spray distribution over a wide range of pressures (15-60 PSI)• Ideal for rigs equipped with sprayer controllers• Reduces drift at lower pressures- better coverage at higher pressuresTEEJET NO. COLOR MAP NO.XR8003VK BLUE 700-2233XR8004VK RED 700-2234XR8005VK BROWN 700-2235XR8006VK GRAY 700-2236XR8008VK WHITE 700-2237512

PUMPS & SPRAY EQUIPMENTFloodjet TiipTurbo Floodjet TipFLOODJET SPRAY TIPWide Angle Flat Spray Tips-Excellent tips for broadcast spraying due to widedeflector type spray pattern. Available in solid brass (TK Series), solid stainlesssteel (TKSS Series) and stainless steel with color-coded body (TKVS Series).TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TK1 BRASS 700-3103 TKSS2.5 STAINLESS 700-3126TK1.5 BRASS 700-3104 TKSS3 STAINLESS 700-3127TK2 BRASS 700-3105 TKSS4 STAINLESS 700-3128TK2.5 BRASS 700-3106 TKSS5 STAINLESS 700-3129TK3 BRASS 700-3107 TKSS7.5 STAINLESS 700-3130TK4 BRASS 700-3108 TKSS10 STAINLESS 700-3131TK5 BRASS 700-3109 TKSS15 STAINLESS 700-3135TK7.5 BRASS 700-3110 TKVS2 RED 700-3165TK10 BRASS 700-3111 TKVS2.5 BROWN 700-3166TK15 BRASS 700-3115 TKVS3 GRAY 700-3167TK20 BRASS 700-3119 TKVS4 WHITE 700-3168TKSS1 STAINLESS 700-3123 TKVS5 BLUE 700-3169TKSS1.5 STAINLESS 700-3124 TKVS7.5 GREEN 700-3170TKSS2 STAINLESS 700-3125 TKVS10 BLACK 700-3171TURBO FLOODJET SPRAY TIPWide Angle Flat Spray Tip• Excellent spray distribution for uniform coverage along the boom• Nozzle design incorporates pre-orifice to produce larger droplets for less drift• Large round orifice reduces clogging• Stocked Stainless Steel with color-coding (Series TFVS) and Polymer withcolor-coding (Series TFVP)TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TFVS2 RED 700-3185 TFVP2 RED 700-3192TFVS2.5 BROWN 700-3186 TFVP2.5 BROWN 700-3193TFVS3 GRAY 700-3187 TFVP3 GRAY 700-3194TFVS4 WHITE 700-3188 TFVP4 WHITE 700-3195TFVS5 BLUE 700-3189 TFVP5 BLUE 700-3196TFVS7.5 GREEN 700-3190 TFVP7.5 GREEN 700-3197TFVS10 BLACK 700-3191 TFVP10 BLACK 700-3198PUMPS & SPRAY EQUIPMENT513

PUMPS & SPRAY EQUIPMENT“AI” Air Induction TipsTurbo Jet Tip“AI” AIR INDUCTION TIPSStainless Steel with VisiFlow Color-Coding• Stainless steel insert produces tapered edge flat spray pattern for uniformcoverage in broadcast spraying• Larger droplets for less drift• Depending on chemical, produces large air-filled drops through the use of a venturiair aspiratorTEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.AI11001.5VS GREEN 700-2381 AI11004VS RED 700-2385AI11002VS YELLOW 700-2382 AI11005VS BROWN 700-2386AI11002.5VS TURQUOISE 700-2383 AI11006VS GRAY 700-2387AI11003VS BLUE 700-2384 AI11008VS WHITE 700-2388PUMPS & SPRAY EQUIPMENTTURBO JET SPRAY TIPWide Angle Flat Spray Tips• Tapered edge wide angle flat spray pattern for uniform coverage inbroadcast spraying• Large round passage for less clogging• Excellent resistance to corrosive solutions• Large droplets for less drift• Polymer body with color-codingTEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TT11001VP ORANGE 700-2371 TT11004VP RED 700-2375TT11001.5VP GREEN 700-2372 TT11005VP BROWN 700-2376TT11002VP YELLOW 700-2373 TT11006VP GRAY 700-2377TT11003VP BLUE 700-2374 TT11008VP WHITE 700-2379514

PUMPS & SPRAY EQUIPMENTTwinjet TipsConejet TipsTWINJET TIPSTWINJETTwin Flat Spraytips- Stainless Steel with Color-Coding• Penetrates crop residue or dense foliage• Smaller droplets for thorough coverage• Better spray distribution along boom than with hollow cone nozzlesTEEJET NO. COLOR MAP NO.TJ608002VS YELLOW 700-1888TJ608003VS BLUE 700-1889TJ608004VS RED 700-1890TJ608006VS GRAY 700-1891CONEJET SPRAY TIPHollow Cone Spray Tips• Ideal for banding with two or three nozzles over the row• Finely atomized spray pattern provides thorough coverage. Available in Poly bodywith ceramic orifice (Series TXVK), Poly body with stainless steel orifice (SeriesTXVS) and Solid Brass (Series TX)TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TXVK4 GREEN 700-3670 TXVS26 LT BLUE 700-3658TXVK6 RED 700-3671 TX1 BRASS 700-3601TXVK8 GRAY 700-3672 TX1.5 BRASS 700-3613TXVK10 BLACK 700-3673 TX2 BRASS 700-3602TXVK12 BROWN 700-3674 TX3 BRASS 700-3603TXVK18 ORANGE 700-3675 TX4 BRASS 700-3604TXVS1 DK BLUE 700-3648 TX5 BRASS 700-3605TXVS2 WHITE 700-3649 TX6 BRASS 700-3606TXVS3 YELLOW 700-3650 TX8 BRASS 700-3607TXVS4 GREEN 700-3651 TX10 BRASS 700-3608TXVS6 RED 700-3652 TX12 BRASS 700-3609TXVS8 GRAY 700-3653 TX14 BRASS 700-3610TXVS10 BLACK 700-3654 TX18 BRASS 700-3611TXVS12 BROWN 700-3655 TX22 BRASS 700-3614TXVS18 ORANGE 700-3657 TX26 BRASS 700-3612PUMPS & SPRAY EQUIPMENT515

PUMPS & SPRAY EQUIPMENTLivestock Cooling TipsOffcenter TipsFulljet TipsAll Priced Individually...Sold in Quanities of 5.LIVESTOCK COOLING TIPSTip designed for a fine mist (2 gallons per hour) at standardnozzle pressure of 40 PSI for cooling of livestock.PART NO. TEEJET NO.700-3641 T2WOFFCENTER SPRAY TIPFlat Spray TipsMostly used in double and single swivel nozzle bodies to obtainwide spray swath. Internally threaded for use with eitherthreaded or flanged strainers. Solid brass material.PUMPS & SPRAY EQUIPMENTTEEJET NO. MAP NO. TEEJET NO. MAP NO.OC-01 700-2011 OC-08 700-2005OC-02 700-2013 OC-10 700-2002OC-03 700-2014 OC-20 700-2003OC-04 700-2015 OC-40 700-2004OC-06 700-2007 OC-80 700-2006FULLJET SPRAY TIPWIDE ANGLE FULL CONE SPRAY TIPSUsed on spray rigs with sprayer controllers.Feature large droplets to reduce drift and widespray angle to allow use on 40" spacings.Stainless steel with Visiflo color coding.TEEJET NO. COLOR MAP NO.FL5VS BROWN 700-3400FL65VS GRAY 700-3401FL8VS WHITE 700-3402FL10VS LT BLUE 700-3403516

PUMPS & SPRAY EQUIPMENT25° Brass TipsBrass Cores, Orifice DiscsCeramic Cores, Ceramic Orifice Discs, Stainless Steel Orifice DiscsBRASS CORESSOLD IN QUANTITIES OF 5STANDARD CORES ARE MADEOF BRASS. ALL CORES AREMADE WITH REAR "NIBS"...BE SURE CORE IS ALWAYSPLACED WITH THE "NIB" FACINGTHE NOZZLE BODY.PART NO.700-5101700-5102700-5103700-5106700-5107700-5108CORE SIZEDC-13DC-23DC-25DC-45DC-46DC-56CERAMIC CORESSOLD IN QUANTITIES OF 5PART NO.700-5150700-5152700-5153700-5156700-5157700-5158CORE SIZEDC13-CERDC23-CERDC25-CERDC45-CERDC47-CERDC56-CERNYLON CORESSOLD IN QUANTITIES OF 5PART NO.700-5120700-5121700-5122700-5123700-5124700-5125CORE SIZEDC13-NYDC23-NYDC25-NYDC45-NYDC46-NYDC56-NYSTAINLESS STEELORIFICE DISCSSOLD INQUANTITIES OF 5517ORIFICE DISCS700-5000PART NO.700-5000700-5001700-5002700-5003700-5004700-5005700-5006700-5007700-5008700-5009700-5010700-5019TYPE DSTANDARD TYPE DORIFICE DISC MADEOF HARDENED STAINLESSSTEEL.Core SizeD-1D-2D-3D-4D-5D-6D-7D-8D-10D-12D-14D-16CERAMIC ORIFICE DISCSPART NO.700-5256700-5221700-5230700-5246PART NO.700-5011700-5012700-5013700-5014700-5015700-5017700-5018STANDARD TYPED ORIFICE DISCMFG NO.4916-1034916-374916-494916-78CORE SIZEDCER-2DCER-3DCER-4DCER-5DCER-6DCER-8DCER-10PUMPS & SPRAY EQUIPMENT

PUMPS & SPRAY EQUIPMENTBoomjet NozzlesReplacement Parts for BoomjetVeejet Top Nozzles, OC Tips + Repairs, Boomless NozzlesTYPE 5880-3/4" NPT FEMALEBACK INLET CONNECTION.WEIGHTS: BRASS 2 POUNDS.TYPE 5880 BOOMJET NOZZLES COMBINE TWO OFF-CENTER TIPSAND THREE VEEJET NOZZLES TO PRODUCE AN OVERALL WIDESWATH FLAT SPRAY. NOZZLE ASSEMBLY PROVIDES GOOD DISTRIBU-TION FOR THE WIDE PATTERN COVERAGE OBTAINED. SUPPLIEDWITH ONE ADDITIONAL 1/4" NPT PIPE PLUG AND ONE BLANK TIP... FOREACH SETTING BOOMJET TO SPRAY TO ONE SIDE ONLY. TYPE 5880ALSO HAS A 1/4" NPT PRESSURE GAUGE PORT.PARTNO.700-101700-102700-103700-104BOOMJETNOZZLENO.5880-3/4-2TOCO65880-3/4-2TOC105880-3/4-2TOC205880-3/4-2TOC40OCTIPS(TWO)OC06OC100C200C40VEEJET TOPNOZZLES(TWO)H1/4VV-1506H1/4U-0508HEH1/4U-0520HEH 1/4 U-0540HEVEEJETBOTTOMNOZZLEH1/4VV-9502WITH 50 MESHSTRAINERH1/4VVL-11004WITH 50 MESHSTRAINERH1/4VVL-9506WITH 50 MESHSTRAINERH1/4U9510LIQUIDPSI203040203040203040203040TOTALCAPACITYGPM1.82.32.32.83.54.06.17.48.612.014.717.0"W"FEET33 1/23434 1/239 1/24040 1/24750525660634MPH6.88.29.38.910.712.216.018.420273033GALLONS PER ACRE5MPH5.46.67.57.18.69.812.814.716.414.216.217.87.5MPH3.54.45.04.75.76.58.59.810.914.216.217.810MPH2.73.33.73.54.34.96.47.48.210.612.113.415MPH1.82.22.52.42.93.34.34.95.57.18.18.9PUMPS & SPRAY EQUIPMENTA popular nozzle. Just screw it into a pieceof pipe and hook in a quickacting valve,and you have a spray for tractor, or truckthat will cover a strip up to 56 feet wide.Provides even thorough spray distribution.Fitted with 2 caps, one for 180 and one for90. To change from one spray pattern tothe other, simply take out two screws, andinterchange caps.PART NO.700-191700-192700-193700-194REPLACEMENT PARTS FOR BOOMJET NOZZLESMAP NO. TEEJET NO. DESCRIPTION700-2001 0C-06 Off center tip for 2T0C06 boomjet700-2002 0C-10 Off center tip for 2T0C10 boomjet700-2003 0C-20 Off center tip for 2T0C20 boomjet700-2004 0C-40 Off center tip for 2T0C40 boomjet700-1338 CP3819 Brass cap for boom jet nozzle700-109 CP4784AL Tip Gasket ( Aluminum-2 Required)700-681 CP2812 1/4” Brass Pipe Plug700-5501 H1/4VV-1506 Top nozzle for 2T0C06 boomjet700-5502 H1/4U-0508HE Top nozzle for 2T0C10 boomjet700-5503 H1/4U-0520HE Top nozzle for 2T0C20 boomjet700-5504 H1/4U-0540HE Top nozzle for 2T0C40 boomjet700-5511 H1/4VV-9502 Bottom nozzle for 2T0C06 boomjet700-5512 H1/4VVL-11004 Bottom nozzle for 2T0C10 boomjet700-5513 H1/4VVL-9506 Bottom nozzle for 2T0C20 boomjet700-5514 H1/4U-9510 Bottom nozzle for 2T0C40 boomjetMFG. NO. GPM6530 56540 106550 20DESCRIPTIONBRASS SCREW FOR BOOM-LESS NOZZLECONN.1/2" IPT1/2" IPT1/2" IPTBOOMLESS NOZZLESOperating Data of 180° Tips & Nozzles*Data at 36" heightMATERIALBRASSBRASSBRASSOrificeNo.#5#10#20PSI304050603040506030405060GPM180°1.72.02.22.43.74.24.65.05.15.96.77.1Swath180°44'46'48'50'50'50'52'52'54'54'56'58'3MPH6.47.27.67.912.213.914.615.815.618.019.720.2Gallons Per Acre4 5 8MPH MPH MPH4.8 3.8 2.45.4 4.3 2.75.7 4.5 2.95.9 4.8 3.09.2 7.3 4.610.4 8.3 5.210.9 8.8 5.511.9 9.5 5.911.6 9.3 5.813.5 10.8 6.814.8 11.8 7.415.1 12.1 7.610MPH1.92.22.32.43.74.24.44.84.75.45.96.1* 90° Tips and Nozzles Have Same GPA but 1/2 GPMand Swath518

PUMPS & SPRAY EQUIPMENTNozzle BodiesNYLON HOSE SHANKSQUICK TEEJET NOZZLE BODIESHOSE DROPSFOR USE WITH QUICK TEEJET BODIESINLET CONN.QUICK TEEJET TYPEOUTLET CONN.1/4" NPT(M)SINGLE DOUBLE TRIPLEPART NO.700-1441700-1442700-1443700-1444700-1445700-1446700-1447700-1448700-1449TYPESINGLESINGLESINGLEDOUBLEDOUBLEDOUBLETRIPLETRIPLETRIPLESIZE3/8"1/2"3/4"3/8"1/2"3/4"3/8"1/2"3/4"MFG. NO.18635-111-406-NYB18638-111-540-NYB18719-111-785-NYB18636-112-406-NYB18639-112-540-NYB18720-112-785-NYB18637-113-406-NYB18640-113-540-NYB18721-113-785-NYBQJ200 SERIES - QUICK TEEJET NOZZLEBODIES WITH CHECK VALVEPART NO.700-4102700-4103HOSE DROP NO.QJ21353-6-15QJ21353-6-24QUICK JET CLAMPSLENGTH15"24"CLAMP SUB-ASSEMBLIES FOR ALL QUICKTEEJET NOZZLE BODIES FOR DRY BOOMSPART NO.700-1433700-1434700-1435700-1436SIZE1/2”3/4"1"1 1/4”ROUND TUBE SIZEQJ111-1/2QJ111-3/4QJ111-1QJ111-1 1/4SOLD IN QUANTITIES OF 5PART NO.700-1416700-1419700-1420700-1421700-1422700-1423700-1424700-1425700-1426PART NO.700-1427700-1428700-1429700-1430700-1431700-1432SINGLE DOUBLE TRIPLETYPESINGLESINGLESINGLEDOUBLEDOUBLEDOUBLETRIPLETRIPLETRIPLESIZE3/8"1/2"3/4"3/8"1/2"3/4"3/8"1/2"3/4"QJ300 SERIESMFG. NO.22251-311-375-NYB22251-311-500-NYB22251-311-750-NYB22252-312-375-NYB22252-312-500-NYB22252-312-750-NYBMFG. NO.19349-211-406-NYB19349-211-540-NYB19349-211-785-NYB19350-212-406-NYB19350-212-540-NYB19350-212-785-NYB19351-213-406-NYB19351-213-540-NYB19351-213-785-NYBHi-Pressure Quick TeeJet Nozzle Body.Max Pressure 300 psi.SINGLEDOUBLETYPESINGLESINGLESINGLEDOUBLEDOUBLEDOUBLEHOSE I.D.3/81/2"3/4"3/8"1/2"3/4"PART NO. SIZE SQUARE TUBESIZE700-1437 3/4" QJ111SQ-3/4700-1438 1"QJ111SQ-1700-1439 1 1/4" QJ111SQ-1 1/4700-1440 1 1/2" QJ111SQ-1 1/2SOLD IN QUANTITIES OF 5QJT-NYB QUICKTEEJET ADAPTER WITH11/16"-16 TEEJETTHREADPART NO.700-1450700-1459ADAPTERSMFG. NO.QJTNYB19191EPR GASKETQJT8360-NYB DIAPHRAGMCHECK VALVE QUICK TEEJETBODY SUB-ASSEMBLY FITSTEEJET BODIES WITH 11/16"-16TEEJET THREADPART NO.700-1451*700-1452MFG. NO.QJT8360-NYB20266EPDM GASKET* SOLD IN QUANTITIES OF 12PUMPS & SPRAY EQUIPMENT519

PUMPS & SPRAY EQUIPMENTQuick Teejet Adapters, Diaphragms for Check ValvesParts for Wet BoomShut-Off Cap, Quickjet Outlet AdapterQUICKJET DIAPHRAGM NOZZLE BODIESThese diaphragm bodies allow use of QuickJet System from 1/4” pipe or 11/16”Teejet thread.Features Chemsaver No-Drip shutoff and EPDM diaphragm.PART NO.700-1409700-1410700-1451700-1452700-1701700-1706700-1703TEEJET NO.QJ835514-NYBQJ8360-NYBQJT8360-NYBCP20266-EPDMCP21953-EPRCP21953-VI2195010-NYBDESCRIPTION1/4” Female Thread Inlet1/4” Male Thread Inlet11/16” Female Thread InletEPDM Gasket OnlyRubber Gasket OnlyVITON Gasket OnlyNozzle Body End CapPUMPS & SPRAY EQUIPMENTPART NO.700-1401700-1402PART NO.700-1404700-1405700-1406SINGLEPART NO.700-1417700-1418PARTS FOR WET BOOMQJ17560 SPLIT-EYELETDIAPHRAGM CHECK.VALVE QUICK TEEJETNOZZLE BODY ASSEMBLIES.MFG NO.QJ17560-1/2-NYBQJ17560-3/4-NYBTO CLAMP ON1/2" PIPE3/4” PIPEQJ7421 SPLIT-EYELETQUICK TEEJET NOZZLEBODY ASSEMBLIESMFG NO.QJ7421-1/2-NYBQJ7421-3/4-NYBQJ7421-1-NYBTO CLAMP ON1/2" PIPE3/4" PIPE1" PIPEQJ8600 SWIVEL QUICK TEEJETNOZZLE BODY ASSEMBLIESDESCRIPTIONSINGLEDOUBLEDOUBLEMFG. NO.QJ8600-1/4-NYQJ8600-2-1/4-NYQUICKJET BODY ADAPTERSPermits use of the QuickjetSystem with 1/4”Male/Female Connectionsand 11/16” Teejet Threads.PART NO.700-1413700-1457700-1414PART NO.700-1616TEEJET NO.QJ14TT-NYBQJ14T-NYB2267414-NYBSHUT-OFF CAPTEEJET NO.19843-NYRSOLD IN QUANTITIES OF 5QUICKJET OUTLETADAPTERDESCRIPTION1/4” Male Thread Adapter1/4” Female Thread Adapter1/4” Female Thread Adapter 45°DESCRIPTIONSHUT-OFF CAP & GASKETQUICK TEEJET ADAPTERPERMITS USE OF STAN-DARD 1/4" NPT(M) NOZZLESWITH QUICK TEEJET BODYASSEMBLIES. AVAILABLEWITH 1/4" NPT(F) OUTLETCONN. MADE OF CELCONWITH EPDM SEAT GASKET.PART NO. SIZEQJ 4676-1/4-N700-1612 1/4"SOLD IN QUANTITIES OF 5520

PUMPS & SPRAY EQUIPMENTQuick Teejet Nozzle CapsCap for Ceramic Disk Core25611-NYTEEJET FLAT SPRAY TIPS(SMALLER CAPACITIES)STANDARDLP (BRASS)LP (SS)XRDGNOZZLE CAPSALL CAPS SOLD IN QUANTITIES OF 5SIZES SMALLER THAN - -10- -01- -01- -01- -01THRUTHRUTHRUTHRU- -08- -08- -08- -05CP19438-EPREPDMstandard700-1453THE QUICK TEEJET CAPS ARE DESIGNED WITH GROOVES THAT FIT LOCATING LUGS ON THE NOZZLEBODY. CAPS ARE MADE OF NYLON AND ARE AVAILABLE FOR USE WITH ALL TEEJET SPRAY TIPS.MAXIMUM OPERATING PRESSURE 300 PSI.PART NO.700-1506700-1507700-1508700-1509700-1510700-1511700-1512700-1513CP25609CP25599TEEJET NO.CP25611-1-NYCP25611-2-NYCP25611-3-NYCP25611-4-NYCP25611-5-NYCP25611-6-NYCP25611-7-NYCP25611-8-NYQuickTeejetCapCOLORBLACKWHITEREDBLUEGREENYELLOWBROWNORANGEFor use with teejet flat spray tips larger capacitiesStandard tips - 10 thru 20 XR tips - 10 thru 15PART NO. TEEJET NO. COLOR700-1527 CP25609-2-NY White700-1528 CP25609-3-NY Red700-1529 CP25609-4-NY Blue700-1532 CP25609-7-NY Brown700-1533 CP25609-8-NY OrangeFor use with turbo floodjet tips TK-VS floodjet tipsPART NO. TEEJET NO. COLOR700-1570 CP25599-1-NY Black700-1571 CP25599-3-NY Red700-1572 CP25599-4-NY Blue700-1573 CP25599-6-NY Yellow700-1574 CP25599-8-NY OrangeTYPE TX, TG(THRU-5),FL CONE SPRAY TIPS AND TK FLOODJETSPRAY TIPS25607-NYPART NO. TEEJET NO. COLOR700-1536CP25607-1-NYBLACK700-1537CP25607-2-NYWHITE700-1538CP25607-3-NYRED700-1539CP25607-4-NYBLUE700-1540CP25607-5-NY GREEN700-1541CP25607-6-NY YELLOW700-1542CP25607-7-NY BROWN700-1543CP25607-8-NY ORANGESeatGasket ( )PART NO.700-1546700-1547700-1548700-1549700-1550700-1551700-1552700-1553PART NO.700-1453700-145425597-NYSOLD IN QUANTITIES OF 12CAP FOR CERAMIC DISC COREPART NO.700-1618FOR USE WITH TJ TWINJET ANDAI TEEJET SPRAY TIPS.PART NO.700-1463TEEJET NO.CP25597-1-NYCP25597-2-NYCP25597-3-NYCP25597-4-NYCP25597-5-NYCP25597-6-NYCP25597-7-NYCP25597-8-NYDESCRIPTIONSEAT GASKET-CP19438-EPR-EPDMSeat Gasket-CP19438VI-VITONTEEJET NO.CP26278-1-NYSOLD IN QUANTITIES OF 12COLORBLACKDESCRIPTIONSEAT GASKET-CP18999-EPRCOLORBLACKWHITEREDBLUEGREENYELLOWBROWNORANGESEAT GASKET FOR TEEJETDISC COREPUMPS & SPRAY EQUIPMENT521

PUMPS & SPRAY EQUIPMENTRedball Spray MonitorNutra-Sol• Rugged, reliable design• Easy to install and use• Detection of plugged nozzles• Detection of worn or damaged tip• Detection of leaks in hoses and connections• Increase yields by proper application.Accurately monitor the flow rate on your liquid fertilizerand chemical application equipment. Redballdoes it efficiently and inexpensively.If you have spray tips or fertilizer orifices you can’t see,why take a chance on plugged nozzles when you can use aRedball Spray Monitor.Here's how simple it works... and it does.MANIFOLD MODEL700-8100PART NO.*700-8100*700-8101*700-8102SQUEEZE PUMP MODELS700-8101700-8102MFG NO.3376-00023376-00043376-0005DESCRIPTIONSpray Monitor Manifold 4 Row Unit - 3/8" & 1/2"Spray Monitor 4 Row Unit - 3/8" SqueezeSpray Monitor 4 Row Unit - 1/2" SqueezePUMPS & SPRAY EQUIPMENT*Minimum order quantity is 6 (6 per carton)ITEM4444152233PART NO.700-8110700-8111700-8112700-8113700-8114700-8115700-8116700-8117700-8118700-8119NUTRA - SOLFOR CLEANING SPRAY RIGSMFG NO.816510581651008165101SS316-200B35-M8202100C38-ELC12-EL81654008165401• Neutralizes acidic chemicals.• Helps reduce contamination when changing from onechemical to another.• Assures accurate dosage by removing chemicals fromprevious batch.• Reduces strainer clogging and minimizes nozzle wear.PART NO.421-600SIZE2 LBDESCRIPTIONBall, Red Glass (Sold in sets of 4)Ball, Red Plastic (Sold in sets of 4)Ball, Green Plastic (Sold in setsBall, Stainless steel (Sold in sets of 4)Nut, Monitor polyDisk, BlankElbow 3/8" 90° w/retaining tips (Standard)Elbow, 1/2" 90° w/retaining tipsWasher 3/4" monitor EPDM (Standard)Washer, 3/4" monitor VitonSOLD IN QUANTITIES OF 12522

PUMPS & SPRAY EQUIPMENTTeejet Pesticide Safety KitTeejet Cleaning BrushTeejet Calibration ContainerCLEANING BRUSHTHE TEEJET TIP BRUSH IS DESIGNED TO SAFELY REMOVEDEBRIS FROM PLUGGED SPRAY TIPS. THE SOFT NYLON BRIS-TLES WILL NOT DAMAGE SPRAY TIPS.PART NO.700-21TEEJET NO.CP20016-NYCALIBRATION CONTAINER60 OUNCE CAPACITY DUAL SCALE IN U.S. ANDMETRIC GRADUATIONS MOLDED POLYPROPYLENE CONSTRUC-TION FOR CHEMICAL RESISTANCE AND DURABILITYPART NO.700-23TEEJET NO.CP24034TEEJET TIP TESTERPART NO. TEEJET NO.700-6312 37670• Allows checking of spray tips flow rates in minutes• Two adapters provided to fit all types of conventional andquick-attach nozzle caps• Tester supplied with nozzle cleaning brush• Compartment for storage of brush and extra spray tipsPUMPS & SPRAY EQUIPMENT523

PUMPS & SPRAY EQUIPMENTChemical Safety Gear-Zipper Front Tyvek CoverallsEye Safety ProductsCHEMICAL SAFETY GEARZIPPER FRONT TYVEK COVERALLS• Set-in Sleeve Design Pattern for improved worker comfort!• Coveralls meet or exceed ANSI/ISEA 101-1993! Less rip and tear-outs!• Coveralls are manufactured under a new Garment Quality System called TyvecProtective Wear.PART NO.752-8201752-8202MFG. NO.1412-L1412-XLEYE SAFETY PRODUCTSPART NO.752-8110Economical 4-vent indirect vent model provides excellent protectionand wearer comfort.DESIGNER SAFETY EYEWEARPUMPS & SPRAY EQUIPMENTCudas spectacles are great looking and comfortable safety glass. There's no pressure on yourhead, no distortion and no fogging. They feature a sleek Cudaslide temple that adjusts to five positionsfor individual fit. The optical grade polycarbonate lens provides 99.9% UV protection toreduces eye strain in sunny, outdoor environments. The separate, nylon nosepiece offers greatercomfort and a snug, non-slip fit.PART NO.752-8103350-0001350-0010752-8113DESCRIPTIONDisplay (Glasses Sold Separately)Clear Safety GlassesGray Safety GlassesClear Face Shield524

PUMPS & SPRAY EQUIPMENTSpray HoseDischarge HoseVinyl HoseRED P.V.C. SPRAY HOSEThis hose is high quality specificallycompounded synthetic cover and Tube. Willstand up to many agricultural spray solutionssuch as lasso, insecticides, and fungicides.Packed on mini reels.PRICED PER FT.PART NO.301-4408301-4412301-4416301-4420301-4424301-4432RED RUBBER SPRAY HOSEEpdm solution agricultural spray hose forspraying pesticides, insecticides and fertilizerswith a water base. Durable and long lastingepdm cover and tube have excellent resistance tosunlight, ozone, heat, chemical action andabrasion.PRICED PER FT.PART NO.301-1408301-1412301-1416301-1420301-1424301-1432301-1340301-1348HIGH PRESSURE AG-SPRAY HOSEAg spray is a chemical spray hose designed for medium and high pressureagriculture spraying. Features include: fuel and solvent resistanttubes increase service life and enables a wide range of chemicals to beused, tough abrasion-resistant outer cover for long life, flexible for easeof handling, wide temperature range-from 14° F to 140° F. Ideal forspray booms, pest control spray lines, orchard spraying, nursery, lawnand turf spraying, and chemical transfer. PRICED PER FT.PART NO.301-4612301-4616EVA ANHYDROUS AMMONIA HOSEPART NO.300-1312300-1316SIZE I.D.1/4"3/8"1/2"5/8"3/4"1"SIZE I.D.1/4"3/8"1/2"5/8"3/4"1"1-1/4"1-1/2"SIZE I.D.3/8"1/2"SIZE I.D.3/8"1/2"WORKINGPRESSURE300300250200200150WORKINGPRESSURE200200200200200200200200WORKINGPRESSURE600600FT. PERREEL300300300300300300FT. PERREEL750'650'500'400'350'250'250'200'FT PERREEL300300WORKING PRESSURE AT 70°50500 FEET PER ROLL - PRICED PER FT.HOSE CUTTERCuts all sizes up to 1 1/4" I.D. Polypropylene, polybutylene, pvc,abs, and rubber hose. Features a strong tough nylon handlewith repleable stainless steel blades. Li’l nipper cutters are easilycarried. The cutters are light and can be handily carried in the back pocketor tool pouch. Ideal in limited working space, such as down a trench, close toa ceiling or wall etc.DISCHARGE HOSELay flat design pvc lightweight and flexible. This hose is easyto roll and carry. Strong and weather proof will not absorbwater, resistant to oils, greases, acids and many chemicals,abrasion, mildew and rot. Performance range is from 5 F to125 F.PRICED PER FT.PART NO.301-6148301-6164301-6172CLEAR VINYL HOSEGood resistance to oils, acids, alkalids and many solventsexcept for ethers, key tones and aromatic hydro carbons.Non-toxic fda approved for potable liquidsPART NO.301-2708301-2712301-2716301-2724301-2732301-2720PART NO.301-4508301-4512301-4516301-4520301-4524301-4532SIZEI.D.1-1/2"2"3"100 FEET PER ROLLPRICED PER FT.SIZEI.D.1/4"3/8"1/2"3/4"1"5/8"CLEAR VINYL HOSEREINFORCED W/ POLYESTER YARNTo reduce elongation under pressure.100 FEET PER ROLLPRICED PER FT.SIZEI.D.1/4"3/8"1/2"5/8”3/4"1"PART NO.456-241456-242WORKINGPRESSURE857085WORKINGPRESSURE706545353030FT. PERREEL300300300WALLTHICKNESS1/16"1/8'1/8"1/8"1/8"1/8"WORKING PRESSURE AT70°F 122°F250 150225 125200 100200 100150 85125 75DESCRIPTIONCOMPLETE TOOLREPLACEMENTBLADES (2)PUMPS & SPRAY EQUIPMENT525

PUMPS & SPRAY EQUIPMENTSuction HoseSUCTION HOSE#300 EPDM SUCTION HOSE100 FEET PER ROLLPRICED PER FT.PART NO.301-3400301-3401301-3402301-3403301-3404SIZEI.D.1"1-1/4"1-1/2"2"3"Temp. Range: -40ºF to 158ºFApplications:Heavy duty liquid suction hose for use inconstruction dewatering, liquid waste,cesspool cleaning, septic handling, agriculturalapplications and marine useSIZEO.D.1.34"1.65"1.84"2.43"3.52"PITCH.30".33".35".39".59"MINIMUMBENDINGRADIUS 72ºF1.9"3.2"3.2"5.2"7.1"WORKINGPRESSURE5050505043Construction:EPDM rubber, polyethylene helix, smoothbore, corrugated O.D.Features:• Lightweight and flexible• External helix provides for easy drag• Resistant to agricultural chemicals• Green & black colorBURSTINGPRESSURE72ºF220220220190150VACUUMRATING29.829.829.829.829.8WEIGHTLbs./Ft..23.34.40.671.10PUMPS & SPRAY EQUIPMENT100 FEET PER ROLLPRICED PER FT.PART NO.301-3410301-3411301-3412301-3413#390 SD SUCTION/DISCHARGE HOSESIZEI.D.1-1/4"1-1/2"2"3"Temp. Range: -40ºF to 158ºFApplications:Suction and discharge of liquids in the construction,rental and agricultural industriessuch as agricultural chemcials, liquid fertilizersand dewateringSIZEO.D.1.60"1.87"2.42"3.54"PITCH.39".43".47".59"MINIMUMBENDINGRADIUS 72ºF3.0"3.0"5.0"7.0"CLEAR SUCTION HOSEConstruction:EPDM rubber, polyethylene helix, syntheticbraiding, smooth bore, corrugatedO.D.Features:• Lightweight and flexible• Rated for both suction and discharge• External helix provides for easy drag• Resistant to agricultural chemicals• Durable in construction applications• Black spiralWORKINGPRESSURE10010010090VACUUMRATING29.829.829.829.8WEIGHTLbs./Ft..45.50.731.25100 FEET PER ROLLPRICED PER FT.A medium duty suctionhose with reinforcing ofrigid plastic with a smooth borevinyl tubing.PART NO.301-3324301-3332301-3340301-3348301-3364SIZE I.D.3/4"1"1-1/4"1-1/2"2"WORKINGPRESSURE8686797272526

PUMPS & SPRAY EQUIPMENTFittingsNPTMHOSE BARB FITTINGPART NO.804-125804-126804-127804-128804-129804-130804-132804-133804-134804-135804-136804-139804-140804-141804-142804-143804-144804-145804-146804-148804-149804-150804-151804-152804-153MGHT/HOSEBARB FITTINGPART NO.804-22804-23804-25NPTMSIZE1/41/41/43/83/83/81/21/21/21/21/23/43/43/43/43/41111-1/41-1/41-1/41-1/21-1/22THREADSIZE3/43/43/4CLOSE NIPPLE: NPTMPART NO.804-272804-273804-274804-275804-276804-277804-278804-279PART NO.804-367804-368THREADSIZE1/43/81/23/411-1/41-1/22NPTSIZE3/43/4NYLONBARBSIZE1/43/81/21/43/81/21/43/81/25/83/43/81/25/83/413/411-1/411-1/41-1/21-1/41-1/22NYLONBARBSIZE3/81/23/4FITTINGSPIPE THREAD-HOSE BARBSMFG NO.A14A1438A1412A3814A38A3812A1214A1238A12A1258A1234A3438A3412A3458A34A34100A10034A100A100114A114100A114A114112A112114A112A200PKG.QTY.5555555555555555222111111527PART NO.804-1125804-1126804-1127804-1128804-1129804-1130804-1132804-1133804-1134804-1135804-1136804-1139804-1140804-1141804-1142804-1143804-1144804-1145804-1146804-1148804-1149804-1150804-1151804-1152804-1153POLYPROPYLENENPTMSIZE1/41/41/43/83/83/81/21/21/21/21/23/43/43/43/43/41111-1/41-1/41-1/41-1/21-1/22GARDEN HOSE THREAD-HOSE BARBSNYLONMFG. NO.D3438D3412D34MFG NO.M14M38M12M34M100M114M112M200NYLONBARBSIZE1/23/4PKG.QTY.555PART NO.804-1022804-1023804-1025PART NO.804-1272804-1273804-1274804-1275804-1276804-1277804-1278804-1279ALL ITEMS ARE PRICED EACH& SOLD IN PACKAGE QUANTITIES.BARBSIZE1/43/81/21/43/81/21/43/81/25/83/43/81/25/83/413/411-1/411-1/41-1/21-1/41-1/22POLYPROPYLENETHREADSIZE3/43/43/4THREADSIZE1/43/81/23/411-1/41-1/22BARBSIZE3/81/23/4HEX PIPE NIPPLESPOLYPROPYLENEPKG. QTY.55552111ELL FEMALE THREAD-HOSE BARBSMFG. NO.EL3412FEL34FPKG.QTY.55PART NO.804-1367804-1368NPTMHOSE BARB FITTINGMFG NO.3A14G3A1438G3A1412G3A3814G3A38G3A3812G3A1214G3A1238G3A12G3A1258G3A1234G3A3438G3A3412G3A3458G3A34G3A34100G3A10034G3A100G3A100114G3A114100G3A114G3A114112G3A112114G3A112G3A200GMFG. NO.3D3438G3D3412G3D34GMFG NO.3M14G3M38G3M12G3M34G3M100G3M114G3M112G3M200GPOLYPROPYLENENPTSIZE3/43/4BARBSIZE1/23/4MFG. NO.3EL3412G3EL34GPKG.QTY.5555555555555555222111111MGHT/HOSEBARB FITTINGPKG.QTY.555CLOSE NIPPLE:NPTMPKG. QTY.55552111PKG.QTY.55PUMPS & SPRAY EQUIPMENT

PUMPS & SPRAY EQUIPMENTDry Boom Nozzles700-1446 700-1465 700-1467PUMPS & SPRAY EQUIPMENTQJ39685 Series QuickJetNozzle Body For Dry Booms• Use with QuickTeejet Caps• Hose shanks available in double, single• (left or right) for 1/2" hose i.d.• Teejet Chemsaver drip-free shutoff• 300 P.S.I. Max operating pressure• Made of corrosion resistant materials• EPDM diaphragmMAP No. Teejet No. Description700-1446 QJ39685IL500NYB Single-Left Nozzle Body700-1465 QJ39685IR500NYB Single-Right Nozzle Body700-1467 QJ396852500NYB Double Nozzle BodyQJ360B Series QuickTeejet MultipleNozzle Body Assemblies For Dry Booms• Available in either 3 or 5 spray positionsfor easy change of spray tips or quick boomflushing.• Positive shutoff between each spray position• Max operating pressure of 300 P.S.I.• Chemsaver diaphragm check valves for dripfreeshutoff• Corrosion resistant materials• Single or double hose shanks - 1/2", 3/4", or 1"24230A Series QuickJetTriple Nozzle BodyFor Dry Booms• Same features as QJ360Bseries, except has turretstyle nozzle• Max operating pressure of25 P.S.I.MAP No. Teejet No.700-1472 24230A1785NYBDescriptionSingle 3/4" Hose NozzleMAP No. Teejet No.700-1473 24230A2785NYBDescriptionDouble 3/4" Hose NozzleNo. FitsMAP No. Teejet No. Type Outlets Hose700-1475 QJ363B5001NYB Single 3 1/2"700-1476 QJ363B5002NYB Double 3 1/2"700-1477 QJ363B7501NYB Single 3 3/4"700-1478 QJ363B7502NYB Double 3 3/4"700-1490 QJ365B7501NYB Single 5 3/4"700-1491 QJ365B7502NYB Double 5 3/4"700-1492 QJ365B10001NYB Single 5 1"700-1493 QJ365B10002NYB Double 5 1"528

PUMPS & SPRAY EQUIPMENTFittings"L" HOSEFITTINGS: NPT/HBPART NO.804-203804-204804-205804-207804-208804-209804-212804-213804-215804-218804-219804-221804-222804-223804-224804-225804-227804-228804-230804-231PART NO.804-102804-104804-106804-107804-108804-112804-113804-114804-115804-116"L" HOSEFITTINGS:HB/HBPART NO.804-181804-182804-185804-187804-188804-189804-190NPTMSIZE1/41/41/43/83/83/81/21/21/23/43/43/43/41111-1/41-1/41-1/22BARB SIZE1/43/83/8 & 1/21/25/83/411-1/41-1/22BARB SIZE1/4 X 1/43/8 X 3/81/2 X 1/23/4 X 3/41 X 11 1/4 X 1 1/41 1/2 X 1 1/2NYLONBARBSIZE1/43/81/21/43/81/23/81/23/43/81/23/411/23/4111-1/41-1/22NYLONFITTINGSELL PIPE THREAD-HOSE BARBSMFG. NO.EL14EL1438EL1412EL3814EL38EL3812EL1238EL12EL1234EL3438EL3412EL34EL34100EL10012EL10034EL100EL114100EL114EL112EL200MFG. NO.SHM14SHM38SHM1238SHM12SHM58SHM34SHM100SHM114SHM112SHM200NYLONMFG. NO.EL14HBEL 38HBEL12HBEL34HBEL100HBEL114HBEL112HBPKG.QTY.55555555555552221111PART NO.804-1203804-1204804-1205804-1207804-1208804-1209804-1212804-1213804-1215804-1218804-1219804-1221804-1222804-1223804-1224804-1225804-1227804-1228804-1230804-1231HOSE MENDERSPKG. QTY.5555552111ELBOW HOSE BARBSPKG.QTY.5555211PART NO.804-1102804-1104804-1106804-1107804-1108804-1112804-1113804-1114804-1115804-1116PART NO.804-1182804-1185804-1187POLYPROPYLENENPTMSIZE1/41/41/43/83/83/81/21/21/23/43/43/43/41111-1/41-1/41-1/22NYLON LOCKNUTS ONLYBARB SIZE1/43/83/8 & 1/21/25/83/411-1/41-1/22ALL ITEMS ARE PRICED EACH& SOLD IN PACKAGE QUANTITIES.BARBSIZE1/43/81/21/43/81/23/81/23/43/81/23/411/23/4111-1/41-1/22MFG. NO.3EL14G3EL1438G3EL1412G3EL3814G3EL38G3EL3812G3EL1238G3EL12G3EL1234G3EL3438G3EL3412G3EL34G3EL34100G3EL10012G3EL10034G3EL100G3EL114100G3EL114G3EL112G3EL200GPOLYPROPYLENEPOLYPROPYLENEBARB SIZE3/8 X 3/81/2 X 1/23/4 X 3/4MFG. NO.3SHM14G3SHM38G3SHM1238G3SHM12G3SHM58G3SHM34G3SHM100G3SHM114G3SHM112G3SHM200GMFG. NO.3EL38HBG3EL12HBG3EL34HBG"L" HOSEFITTINGS: NPT/HBPKG.QTY.55555555555552221111PKG. QTY.5555552111"L" HOSEFITTINGS:HB/HBPKG.QTY.555PUMPS & SPRAY EQUIPMENTNYLONPOLYPROPYLENEPART NO.804-490THREAD11/16MFG. NO.B12PKG.QTY.5PART NO.804-1490THREAD11/16MFG. NO.3B12GPKG.QTY.5529

PUMPS & SPRAY EQUIPMENTFittingsNYLONFITTINGSGAUGE TEESWITH 1/4" GAUGE PORTALL ITEMS ARE PRICED EACH& SOLD IN PACKAGE QUANTITIES.POLYPROPYLENEPART NO.804-442PARTNO.804-377804-378804-379804-380THREAD3/4THREAD11/1611/1611/1611/16PORTSIZE1/4NYLONBARB3/81/25/83/4NYLONMFG. NO.GTT3414MFG. NO.NTT38NTT12NTT58NTT34PKG. QTY.1TEE NOZZLESPKG. QTY.5555PART NO. THREAD804-1442 3/4PART NO.804-1377804-1378804-1379804-1380ELL NOZZLESPORTSIZE1/4MFG. NO.3GTT3414GPOLYPROPYLENETHREAD11/1611/1611/1611/16BARB3/81/25/83/4MFG. NO.3NTT38G3NTT12G3NTT58G3NTT34GPOLYPROPYLENEPKG. QTY.1PKG. QTY.5555PART NO. THREAD804-370 11/16804-371 11/16804-372 11/16804-373 11/16BARB3/81/25/83/4MFG. NO.NTL38NTL12NTL58NTL34PKG. QTY.5555PART NO. THREAD804-1370 11/16804-1371 11/16804-1372 11/16804-1373 11/16BARB3/81/25/83/4TEES WITH THREAD AND THREE HOSE BARBSMFG. NO.3NTL38G3NTL12G3NTL58G3NTL34GPKG. QTY.5555PUMPS & SPRAY EQUIPMENTPART NO.804-460804-461804-462PARTNO.804-471804-472804-473804-474804-475804-476804-477BARB3/81/23/4MALEPIPE1/41/23/411 1/41 1/22NYLONTHREAD11/16"11/16"11/16"NYLONFEMALEPIPE1/41/23/411 1/41 1/22NIPPLESNPTM/GHTMPART NO. SIZE804-33 3/4 MGHT X 3/4 MPT804-34 3/4 MGH X 1/2 MPTNYLONMFG. NO.T38CT12CT34CMFG.NO.SE14SE12SE34SE100SE114SE112SE200MFG#E-34E3412PKG. QTY.555PART NO.804-1460804-1461804-146290° STREET ELBOWSPKG.QTY.5522111PARTNO.804-1471804-1472804-1473804-1474804-1475804-1476804-1477POLYPROPYLENEBARB3/81/23/4MALEPIPE1/41/23/411 1/41 1/22THREAD ADAPTERSPKG.QTY.55THREAD11/16"11/16"11/16"FEMALEPIPE1/41/23/411 1/41 1/22MFG. NO.3T38CG3T12CG3T34CGPOLYPROPYLENEMFG.NO.35E14G35E12G35E34G35E100G35E114G35E112G35E200GPOLYPROPYLENEPART NO. SIZE804-1033 3/4 MGHT X 3/4 MPTMFG#3E34GPKG. QTY.555PKG.QTY.5552111NIPPLESNPTM/GHTMPKG. QTY.5530

PUMPS & SPRAY EQUIPMENTFittingsFITTINGSTEES - PIPE THREADALL ITEMS ARE PRICED EACH& SOLD IN PACKAGE QUANTITIES.NYLONPOLYPROPYLENEPARTNO.804-481804-482804-483804-484804-485804-486804-487FEMALEPIPE1/41/23/411 1/41 1/22MFG.NO.TT14TT12TT34TT100TT114TT112TT200PKG.QTY.5522111PARTNO.804-1481804-1482804-1483804-1484804-1485804-1486804-1487FEMALE COUPLINGSFEMALEPIPE1/41/23/411 1/41 1/22MFG.NO.3TT14G3TT12G3TT34G3TT100G3TT114G3TT112G3TT200GPKG.QTY.5522111NYLONPOLYPROPYLENEPART.NO.804-261804-262804-263804-264804-265804-266FEMALEPIPE1/23/411 1/41 1/22FEMALEPIPE1/23/411 1/41 1/22MFG.NO.FC12FC34FC100FC114FC112FC200PARTNO.804-1261804-1262804-1263804-1264804-1265804-1266FEMALEPIPE1/23/411 1/41 1/22HOSE BARB INSERT TEESBARB #1PKG.QTY.552111BARB # 2FEMALEPIPE1/23/411 1/41 1/22MFG.NO.3FC12G3FC34G3FC100G3FC114G3FC112G3FC200GPKG.QTY.552111PARTNO.804-402804-406804-407804-409804-410804-413804-414804-415804-416804-417804-418804-419PART NO.804-342804-343804-344804-345804-346804-347# 1BARB1/43/81/23/81/25/81/23/411 1/41 1/22# 2BARB1/43/81/23/81/25/81/23/411 1/41 1/22NPT SIZE1/43/81/23/411-1/4NYLON# 3BARB1/43/83/81/21/25/83/43/411 1/41 1/22NYLONMFG#F14F38F12F34F100F114"T" HOSEBARB FITTINGMFGNO.T14T38T3812T1238T12T58T3412T34T100T114T112T200PKG.QTY.555555552111BARB # 3PARTNO.804-1402804-1406804-1407804-1410804-1413804-1414804-1415804-1416804-1417804-1418804-1419HEX PIPE PLUGSPKG.QTY.555521PART NO.804-1342804-1343804-1344804-1345804-1346804-1347# 1BARB1/43/81/21/25/81/23/411 1/41 1/22POLYPROPYLENE# 2BARB1/43/81/21/25/81/23/411 1/41 1/22# 3BARB1/43/83/81/25/83/43/411 1/41 1/22MFGNO.3T14G3T38G3T3812G3T12G3T58G3T3412G3T34G3T100G3T114G3T112G3T200GPOLYPROPYLENENPT SIZE1/43/81/23/411-1/4MFG#3F14G3F38G3F12G3F34G3F100G3F114GPKG.QTY.55555552111PKG.QTY.555521PUMPS & SPRAY EQUIPMENT531

PUMPS & SPRAY EQUIPMENTFittingsFITTINGSREDUCER PIPE BUSHINGSALL ITEMS ARE PRICED EACH& SOLD IN PACKAGE QUANTITIES.NYLONPOLYPROPYLENEPART NO.804-303804-305804-306804-308804-309804-310804-314804-315804-318804-319804-322804-323804-324804-325804-326804-328NPTM SIZE3/8 X 1/41/2 X 1/41/2 X 3/83/4 X 1/43/4 X 3/83/4 X 1/21 X 1/21 X 3/41-1/4 X 3/41-1/4 X 11 1/2 X 11-1/2 X 1-1/42 X 12 X 1 1/42 X 1-1/23 X 2MFG#RB3814RB1214RB1238RB3414RB3438RB3412RB10012RB10034RB11434RB114100RB112100RB112114RB200100RB200114RB200112RB300200PKG.QTY.5555552211111111PARTNO.804-1303804-1305804-1306804-1308804-1309804-1310804-1314804-1315804-1318804-1319804-1322804-1323804-1324804-1325804-1326804-1328COUPLERSNPTM SIZE3/8 X 1/41/2 X 1/41/2 X 3/83/4 X 1/43/4 X 3/83/4 X 1/21 X 1/21 X 3/41-1/4 X 3/41-1/4 X 11 1/2 X 11-1/2 X 1-1/42 X 12 X 1 1/42 X 1-1/23 X 2MFG#3RB3814G3RB1214G3RB1238G3RB3414G3RB3438G3RB3412G3RB10012G3RB10034G3RB11434G3RB114100G3RB112100G3RB112114G3RB200100G3RB200114G3RB200112G3RB300200GPKG.QTY.5555552211111111NYLONPOLYPROPYLENEPUMPS & SPRAY EQUIPMENTPART NO. DESCRIPTION804-46804-343/4" FGHT X 3/4" MGHT3/4" MGH X 1/2" MPTFEMALE GARDEN HOSE THREAD AND FEMALE PIPE THREADNYLONPART NO. DESCRIPTION804-47 3/4" FGHT X 1/2" FPTPART NO.804-11804-12804-13804-14804-15NYLONMFG #I34E3412MFG. #J3412SIZE MFG#1/4 C143/8 C381/2 C125/8 C583/4 C34FOR USE WITH 804-7 SWIVEL NUTPKG. QTY.55PKG. QTY.5PART NO. DESCRIPTION804-1046 3/4" FGHT X 3/4" MGHTCOUPLERSMFG #3I34GPOLYPROPYLENEPART NO. DESCRIPTION804-1047 3/4" FGHT X 1/2" FPTFLAT SEAT HOSE BARBSPKG. QTY.55555PART NO.804-1011804-1012804-1013804-1014804-1015SWIVEL NUTSMFG. #3J3412GPOLYPROPYLENESIZE1/43/81/25/83/4MFG#3C14G3C38G3C12G3C58G3C34GPKG. QTY.5PKG. QTY.5PKG. QTY.55555SWIVELHOSE NUTNYLONPOLYPROPYLENESWIVELHOSE NUTPART NO. SIZE804-7 3/4 FGHT804-4 WASHERMFG#B34PKG. QTY.55PART NO. SIZE804-1007 3/4 GHTMFG#3B34GPKG. QTY.5532

FITTINGSADAPTER 90° ELBOWSPUMPS & SPRAY EQUIPMENTFittingsNozzle Thread Connectors w/Hose BarbPoly Tank Bulkhead Fittings, Jet AgitatorsALL ITEMS ARE PRICED EACH & SOLDIN PACKAGE QUANTITIES WHERE LISTED.NYLONPOLYPROPYLENEPARTNO.804-51804-52MGHT3/4"3/4"MPT1/2"3/4"NYLON FITTINGS90° ELBOWMFG.NO.EL3412GPEL34GPPKG.QTY.55POLYPROPYLENE FITTINGS90° ELBOWPART NO.804-251804-252804-253804-254804-255804-256PARTNO.804-1051804-1052MGHT3/4"3/4"FEMALEMPT1/2"3/4"1"1 1/4"1 1/2"2"PART NO.804-1251804-1252804-1253804-1254804-1255804-1256MPT1/2"3/4"FEMALEMPT1/2"3/4"1"1 1/4"1 1/2"2"MFG.NO.3EL3412GPG3EL34GPGMFG. NO.LL1212LL3434LL100LL114LL112LL200MFG. NO.3LL12G3LL34G3LL100G3LL114G3LL112G3LL200GNOZZLE THREAD CONNECTORS W/ HOSE BARBNYLONPKG.QTY.55PKG.QTY.522111PKG.QTY.522111PART NO.804-450804-451THREAD11/1611/163/4" MPT OUTLET 1/2" FPT INLETBARB3/81/2JET AGITATORSMFG. NO.38D3812DPOLY TANK BULKHEAD FITTINGSPKG. QTY.55BLACK POLYPROPYLENE DOUBLE THREADED BULKHEAD (TANK) FITTING WITH 3/16" EPDM GASKET (WITH-DRAWAL FITTINGS) CAN BE INSTALLED FROM ONE SIDE OF TANK OPENING SAME SIZE AS OUTSIDE DIAMETER.PART NO.804-502804-503804-504804-505804-506SIZE3/4"1"1 1/4"1 1/2"2"MFG. NO.WBH34WBH100WBH114WBH112WBH2003/4" MPT OUTSIDE THREADPUMPS & SPRAY EQUIPMENTPART NO. MFG. NO.712-3371 3371SIZE1/2" FPT INLET, 3/4" MPT OUTLETCOMPLETE WITH 3/16", 5/32", &1/8" NOZZLESPART NO. MFG. NO.712-801 3371-00193/4" MPT INSIDE THREADSIZE3/4" NPT NYLON JET AGITATORCOMPLETE WITH 1/4", 3/16", 5/32",& 1/8" NOZZLES533

PUMPS & SPRAY EQUIPMENTBrass Gate ValvesBrass Hose BibbsBrass Ball Valves, Garden HoseBRASS GATE VALVESBRASS HOSE BIBBSROUGH BRASS READINGPATTERN FAUCET, HOSETHREAD, TEE, HANDLE,IPT CONNECTION.PARTNO.319-1608319-1612319-1616319-1624319-1632319-1640319-1648319-1664200 PSI W.O.G.NON SHOCK TO 200º FNON RISING STEMSOLID WEDGE DISCTHREADED ENDSSIZE1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"PARTNO.319-1516319-1524BRASS BALL VALVES125 PSI W.S.P.400 PSI W.O.G. NON SHOCKTHREADED ENDSSTANDARD PORTPART NO.319-1708319-1712319-1716319-1724319-1732319-1740319-1748319-1764SIZE I.P.T.1/2"3/4"SIZE1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"PUMPS & SPRAY EQUIPMENTTIRE CORDREINFORCEDGARDEN HOSEPART NO. SIZE308-100 5/8" X 50 FT• BRILLIANT GREEN"MIRROR FINISH"• REINFORCED WITHNYLON TIRE CORD• POPULARLY PRICED• ATTRACTIVE COIL PACKAGE• FLEXIBLE, FOR EASY COILING• ALL-BRASS COUPLINGS534

PUMPS & SPRAY EQUIPMENTBrass Hose InsertsBRASS HOSE INSERTSMALE BARB INSERTS SWIVEL HOSE BARBSMALE BARBEDBRASS INSERTSWIVELBRASS HOSE BARBPART NO.807-4701807-4702807-4703807-4704807-4705807-4706807-4709807-4713807-4715807-4716807-4719807-4720807-4721807-4722807-4725807-4726807-4730807-4732807-4739FEMALE BARB INSERTSPARTNO.807-4655807-4663807-4665PARTNO.807-4823807-4828807-4829MFG. NO.6846906896916926876936946951172697686698117368511817006991164MFG.NO.720722725SOLIDFEMALE BARBEDBRASS INSERTMALE GARDEN HOSEINSERTSMFG.NO.990M991M992MHOSE I.D.1/8"3/16"3/16"1/4"1/4"1/4"5/16"3/8"3/8"3/8"1/2"1/2"1/2"1/2"5/8"5/8"3/4"3/4"1"HOSEI.D.1/4"3/8"3/8"HOSEI.D.1/2"5/8"3/4"MALE NPT1/8"1/8"1/4"1/8"1/4"3/8"1/4"1/4"3/8"1/2"1/4"3/8"1/2"3/4"3/8"1/2"1/2"3/4"1"FEMALEPIPETHREAD1/4"1/4"3/8"GARDENHOSETHREAD3/4"3/4"3/4"PARTNO.807-21807-22807-23807-24807-25GARDEN HOSE NUTSSWIVELBRASS HEX NUTGARDEN HOSE NUTPARTNO.807-20807-26MFGNO.GHNGHWMFGNO.998FB999FB993FB994FB995FBBRASS HOSEMENDERSPARTNO.807-120807-121807-122807-123807-124MFGNO.733730731732735SIZE1/4"3/8"1/2"5/8"3/4"GARDEN HOSEWASHERDESCRIPTIONGARDENHOSE NUTGARDENHOSE WASHERBARBSIZE3/8"3/16"1/4"5/16"1/2"PUMPS & SPRAY EQUIPMENT535

PUMPS & SPRAY EQUIPMENTPipe to Hose FittingsTubePak Cable TiesUV Black Cable TiesH-3PIPE TO HOSE FITTINGSBRASSPART NO. DESCRIPTIONPART NO. DESCRIPTION807-107 1/2" MIP X 3/4" FHT807-101 3/4" MHT X 1/2" FIPH-10H-4PART NO. DESCRIPTON807-102 3/4" MHT X 3/4" MP X 1/2" FIPH-2PART NO. DESCRIPTION807-109 3/4" MHT X 3/4" MIPPUMPS & SPRAY EQUIPMENTH-530H-6H-7H-8TUBEPAK CABLETIES• Resealable tube contains450 assorted cable ties• Contains assorted colorcable ties• Includes 4”, 7”, and 11”• Ideal for promotions andendcaps displaysPART NO. DESCRIPTION807-103 3/4" MHT X 1/2" MIPPART NO. DESCRIPTION807-104 3/4" MHT X 3/4" FIPPART NO. DESCRIPTION807-105 3/4" MIP X 1/2" FIPPART NO. DESCRIPTION807-106 3/4" MHT X 3/4" MHTH-14,H-15S-1S-2S-3PART NO. DESCRIPTION807-110 3/4" FHT X 3/4" FHTPART NO. DESCRIPTION807-111 3/4" FHT X 3/4" FIPPART NO. DESCRIPTION807-117 1/2" FIP X 3/4" FHT (SWIVEL)PART NO. DESCRIPTION807-118 3/4" FIP X 3/4" FHT (SWIVEL)PART NO. DESCRIPTION807-119 3/4" FHT X 3/4" FHT (SWIVEL)UV BLACK CABLE TIESFOR TYING AND BUNDLING IN INDUSTRIAL, PLUMBING, AUTOMOTIVE AND MARINE APPLICATIONS.• Install easily with or without toolsONE PIECE 6/6 NYLON• Easy to grasp, easy to thread tip• Serrated on both sides of strap for greater holding power• Withstands wide temperature range• Corrosion resistant; fungus resistant• For indoor and outdoor applications• Tapered tips slip easily under and around cables• Flexible nylon conforms readily to most shapes• Uniform serrations along the length of the tie permit easy “pull through” rightdown to the bundle-ready for final tensioning and cut-off for a neat, tight harness.PART NO.374-2655PART NO.374-2640374-2641374-2642374-2643*374-2644*374-2645*374-2646Length4"7"11"14"15"21"Tensile Strength18 lbs.75 lbs.75 lbs.120 lbs.120 lbs.175 lbs.175 lbs.30"PACKAGED AND SOLD 100 PER BAGEXCEPT *PACKAGED AND SOLD 50 PER BAG536

PUMPS & SPRAY EQUIPMENTHose Clamps-Standard ClampsMini ClampsHose Clamp MerchandiserSTANDARD CLAMPS9/16" BAND 5/16" HEX HEAD SCREW WITH SLOTPRICED EACH - PACKAGED 10 PER CARTONHOSE CLAMPSMINI CLAMPS5/16" BAND 1/4" HEX HEAD SCREW WITH SLOTCLAMPS ARE MANUFACTURED OF STAINLESSSTEEL- BAND AND HOUSING WITH HARDENEDZINC PLATED ADJUSTING SCREW.PRICED EACH - PACKAGED 10 PER CARTONPART NO. MIN. MAX.316-6 7/16" 25/32"316-8 7/16" 29/32"316-10 9/16" 1-1/16"316-12 11/16" 1-1/4"316-16 3/4" 1-1/2"316-20 13/16" 1-3/4"316-24 1-1/16" 2"316-28 1-5/16" 2-1/4"316-32 1-9/16" 2-1/2"316-36 1-13/16" 2-3/4"316-40 2-1/16" 3"316-44 2-5/16" 3-1/4"316-48 2-9/16" 3-1/2"316-52 2-13/16" 3-3/4"316-56 3-1/16" 4"316-60 3-5/16" 4-1/4"PART NO.316-104PART NO.316-106MIN: 1/4"MAX: 5/8"MIN: 5/16"MAX: 29/32"HOSE CLAMPMERCHANDISERHang it on the wall or stand it on the counter.Conveniently displays popular clamp sizes for impulse salesand easy inventory. Use for compressing, fastening, clamping,repairing. Clamps to fit any hose, pipe or tubing from 1/4" to2-3/4" O.D.PART NO.316-1316-101Tightens firmly.Holds permanently.Exerts even pressure.DESCRIPTIONClamp Display (with clamps)Clamp Display only (empty)PUMPS & SPRAY EQUIPMENT537

PUMPS & SPRAY EQUIPMENTHose Clamps-Stainless Steel ClampsT-Bolt ClampsHOSE CLAMPSSTAINLESS STEELT-BOLT CLAMPSCLAMPSPUMPS & SPRAY EQUIPMENTPART NO.316-116316-118316-1104316-1106316-1110316-1112316-1116316-1120316-1124316-1128316-1132316-1136316-1140316-1144316-1148316-1152316-1156316-1160PRICED EACHPACKAGED 10 PER BOXDESCRIPTIONHose Clamp 7/16" - 25/32"Hose Clamp 7/16" - 29/32"Miniature Hose Clamp 1/4" - 5/8"Miniature Hose Clamp 5/16" - 29/32"Hose Clamp 9/16" - 1-1/16"Hose Clamp 11/16" - 1-1/4"Hose Clamp 3/4" - 1-1/2"Hose Clamp 13/16" - 1-3/4"Hose Clamp 1-1/16" - 2"Hose Clamp 1-5/16" - 2-1/4"Hose Clamp 1-9/16" - 2-1/2"Hose Clamp 1-13/16 - 2-3/4"Hose Clamp 2-1/16" - 3"Hose Clamp 2-5/16" - 3-1/4"Hose Clamp 2-9/16 - 3-1/2"Hose Clamp 2-13/16" - 3-3/4"Hose Clamp 3-1/16" - 4"Hose Clamp 3-5/16" - 4-1/4"Standard T-Bolt Clamps. A Reliable, heavy dutymethod of assembling hose ducting connectionsand tubing. Clamps have a 7/16” nylon insert platedlocknut, plated steel bolt. They also have stainlesssteel trunnion, band & liner.PART NO.316-2603316-2604316-2605316-2607316-2609316-2610316-2613316-2616316-2618316-2622316-2623MIN.1-5/8”1-3/4”1-7/8”2-1/8”2-3/8”2-1/2”2-7/8”3-1/4”3-1/2”4-1/4”4-1/2”Priced & sold individually.MAX.1-7/8”2”2-1/8”2-7/16”2-11/16”2-13/16”3-3/16”3-9/16”3-13/16”4-9/16”4-13/16”538

PUMPS & SPRAY EQUIPMENTPioneer Water Hose Quick CouplingsPIONEER WATER HOSE QUICK COUPLINGSNO MORE THREADING NOZZLES / SPRAYERS / EQUIPMENTUNVALVED DESIGN PERMITS MAXIMUM FLOW WITH MINIMUM PRESSURE DROP.BRASS AND STAINLESS STEELCONSTRUCTION FOR EXTRASTRENGTH / LONG LIFEDURABLE 4 BALL LOCKINGMECHANISM FOR SECURECONNECTIONS807-5001807-5002QUALITY, TEMPERATURE-RESIS-TANT NITRILE SEALS FOR ALEAK-FREE LONG SERVICE LIFEAPPLICATIONS - HEAVY DUTY SERVICE ON FARMS SUCH AS:807-5003• MILKING PARLOR EQUIPMENT• LIVESTOCK WATERING SYSTEMS• GARDEN HOSEEASE OF USE• WASH-DOWN SYSTEMS• MOBILE WATER TANK LINES• FOOD PROCESSING EQUIPMENT807-50041. THREAD COUPLER TO FAUCET OR TO A MALE HOSE END.THREAD NIPPLE TO FEMALE HOSE END.2. TO CONNECT, PULL BACK SLEEVE ON COUPLER, INSERTNIPPLE AND RELEASE THE SLEEVE.3. TO DISCONNECT, RETRACT SLEEVE ON COUPLER AND PULLOUT NIPPLE.PART NO.807-5001807-5002807-5003807-5004807-5005MFG. NO.BP1163BP1163-611163-6047300011163MBDESCRIPTIONWATER COUPLING COMPLETEMALE HALF ONLYFEMALE HALF ONLYWASHER ONLY10 WATER HOSE QUICK COUPLINGS (COUNTER DISPLAY)PIONEER WATER SERVICE QUICK COUPLINGS ARE FOR LOW PRESSURE WATER SERVICE ONLY. DO NOT EXCEED 200 PSI.*Conveniently packaged in attractiveCounter display of ten couplings each.PUMPS & SPRAY EQUIPMENT807-5005539

PUMPS & SPRAY EQUIPMENTGalvanized Malleable Pipe FittingsGALVANIZED MALLEABLE PIPE FITTINGSNOT RECOMENDED FOR HIGH PRESSURE HYDRAULIC APPLICATION. ALL SIZESSHOWN ARE NPT (PIPE) THREADCOUPLINGS90° STREET ELBOWSPART NO.820-102820-104820-106820-108820-112820-116820-120820-124820-132SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"PART NO.820-602820-604820-606820-608820-612820-616820-620820-624820-632SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"GROUND JOINT UNIONSTEESPART NO.820-204820-206820-208820-212820-216820-220820-224820-232SIZE1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"PART NO.820-702820-704820-706820-708820-712820-716820-720820-724820-732SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"90° ELBOWSCAPSPUMPS & SPRAY EQUIPMENTPART NO.820-402820-404820-406820-408820-412820-416820-420820-424820-432SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"BANDED CROSSPART NO.823-104823-108SIZE1/4"1/2"PART NO.820-802820-804820-806820-808820-812820-816820-820820-824820-832PLUGSPART NO.820-902820-904820-906820-908820-912820-916820-920820-924820-932SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"540

PUMPS & SPRAY EQUIPMENTGalvanized Malleable Pipe FittingsGALVANIZED MALLEABLE PIPE FITTINGSHEX BUSHINGSREDUCING COUPLINGSPART NO.821-101821-102821-103821-104821-105821-106821-107821-108821-109821-110821-111821-114821-115821-118821-121SIZE1/4" X 1/8"3/8" X 1/8"3/8" X 1/4"1/2" X 1/8"1/2" X 1/4"1/2" X 3/8"3/4" X 1/4"3/4" X 3/8"3/4" X 1/2"1" X 1/2"1" X 3/4"1-1/4 X 3/4"1-1/4" X 1"1-1/2" X 1-1/4"2" X 1-1/2"PART NO.821-601821-603821-605821-606821-608821-609821-610821-611821-615821-618821-621SIZE1/4" X 1/8"3/8" X 1/4"1/2" X 1/4"1/2" X 3/8"3/4" X 3/8"3/4" X 1/2"1" X 1/2"1" X 3/4"1-1/4" X 1"1-1/2" X 1-1/4"2" X 1-1/2"PLATED STEEL FITTING MPT - HOSE BARBPART NO.312-124312-132312-140312-148312-165312-172MPT.3/411 1/41 1/223HOSEBARB3/411 1/41 1/223MFG. NO.AA34PAA100PAA114PAA112PAA200PAA300PPUMPS & SPRAY EQUIPMENTFOR LOW PRESSURE DISCHARGE & SUCTION SERVICE.NOT INTENDED ORRECOMMENDED FOR COMPRESSED AIR OR HYDRAULIC APPLICATIONS.ALL SIZES SHOWN ARE NPT (PIPE) THREAD541

PUMPS & SPRAY EQUIPMENTGalvanized Pipe NipplesPUMPS & SPRAY EQUIPMENTModern Ag Parts - Beaumont, Texas - Order Toll-Free 1-888-404-8908 - Fax Toll-Free 1-888-404-8910NOTE:1 X CLOSE - 1 X 1-1/21-1/4 X CLOSE - 1-1/4 X 1-5/81-1/2 X CLOSE - 1-1/2 X 1-3/42 X CLOSE - 2 X 2CLOSE-ALLTHREADPART NO.822-1001822-1002822-1003822-1005822-1007822-1011822-1101822-1102822-1103822-1104822-1105822-1106822-1107822-1109822-1111822-1201822-1202822-1203822-1204822-1205822-1206822-1207822-1209822-1211822-1301822-1302GALVANIZED PIPE NIPPLESYOU MAY ORDER THESE BY SIZE OR STOCK NUMBER.EXAMPLE: 1/4 X 2 WOULD BE 822-1103SIZE1/8 X Close1/8 X 1-1/21/8 X 21/8 X 31/8 X 41/8 X 61/4 X Close1/4 X 1-1/21/4 X 21/4 X 2-1/21/4 X 31/4 X 3-1/21/4 X 41/4 X 51/4 X 63/8 X Close3/8 X 1-1/23/8 X 23/8 X 2-1/23/8 X 33/8 X 3-1/23/8 X 43/8 X 53/8 X 61/2 X Close1/2 X 1-1/2PART NO.822-1303822-1304822-1305822-1306822-1307822-1309822-1311822-1401822-1402822-1403822-1404822-1405822-1406822-1407822-1408822-1410822-1411822-1501822-1503822-1504822-1505822-1511822-1601822-1605822-1701822-1801822-1805822-1811SIZE1/2 X 21/2 X 2-1/21/2 X 31/2 X 3-1/21/2 X 41/2 X 51/2 X 63/4 X Close3/4 X 1-1/23/4 X 23/4 X 2-1/23/4 X 33/4 X 3-1/23/4 X 43/4 X 4-1/23/4 X 5-1/23/4 X 61 X Close1 X 21 X 2-1/21 X 31 X 61-1/4 X Close1-1/4 X 31-1/2 X Close2 X Close2 X 32 X 6ALL MEASUREMENTS IN INCHES.NOT RECOMMENDED FOR HIGH PRESSURE HYDRAULIC APPLICATION. ALL SIZESSHOWN ARE NPT (PIPE) THREAD542