Cross reference guides, application and ... - INSCO Group

Penflex’s most flexible hose – close pitch, low force to bendSeries 600 Stainless Steel HoseConstruction: Annular / Close PitchMaterial: Hose: 321 Stainless SteelBraid: 304L Stainless Steel — SB, see pg. 11Characteristics: Light Weight / Extremely High FlexibilityPackaging: Standard Cartons or Braided Hose-on-ReelsNom.I.D.(IN.)1/4”3/8”1/2”3/4”1”1-1/4”1-1/2”2”PartNumberBraidLayersNom.O.D.(IN.)Maximum Pressure @70ºF(PSIG) aWorking Test NominalBurstCenterline BendRadius (IN.)DynamicWeightper Foot(LB.)62-004 0 .50 180 270 ---- .09621-1SB-004 1 .57 2,082 3,122 8,326 3.00 1.00 .17 100 500621-2SB-004 2 .64 3,331 4,997 13,324 .25621-006 0 .67 100 150 ---- .14621-1SB-006 1 .74 1,501 2,251 6,004 3.50 1.25 .26 100 500621-2SB-006 2 .81 2,401 3,600 9,604 .38621-008 0 .82 80 120 ---- .23621-1SB-008 1 .89 1,075 1,613 4,301 4.00 1.50 .35 100 500621-2SB-008 2 .96 1,720 2,580 6,881 .47621-012 0 1.21 70 105 ---- .34621-1SB-012 1 1.28 792 1,188 3,168 6.00 2.25 .54 100 500621-2SB-012 2 1.35 1,267 1,901 5,069 .74621-016 0 1.48 40 60 ---- .37621-1SB-016 1 1.55 571 857 2,285 7.00 2.75 .60 100 450621-2SB-016 2 1.63 914 1,371 3,656 .83621-020 0 1.86 25 38 ---- .76621-1SB-020 1 1.93 531 797 2,125 8.00 3.00 1.07 50 400621-2SB-020 2 2.02 850 1,275 3,400 1.38621-024 0 2.19 20 30 ---- .84621-1SB-024 1 2.28 472 708 1,887 9.00 3.50 1.24 50 350621-2SB-024 2 2.37 755 1,132 3,020 1.64621-032 0 2.51 15 23 ---- 1.00621-1SB-032 1 2.61 505 758 2,022 10.25 4.00 1.62 50 250Static621-2SB-032 2 2.71 809 1,213 3,235 2.24CartonQty. b(FT.)ReelQty b(FT.)Series 600 Stainless Steel Standard BraidConstruction: Tubular – Braid and Braided BraidMaterial: 304L Stainless Steel in stock (SB-304)–321 (SB-321) and 316L (SB-316) available – other alloys available upon requestPackaging: Standard CartonsNom. I.D.(IN.)Part NumberBraid Diameter(IN.)Braid Construction Maximum Pressure @ 70ºF (PSIG) a Braid CoverageWorkingNominal(%)BurstWeightper Foot(LB.)1/4” 1SB-004 0.50 24x5x.014 2,082 8,326 89 .08 1103/8” 1SB-006 0.67 24x7x.014 1,501 6,004 91 .12 1101/2” 1SB-008 0.82 24x7x.014 1,075 4,301 82 .12 110CartonQty. b(FT.)3/4” 1SB-012 1.21 36x8x.014 792 3,168 90 .20 1101” 1SB-016 1.51 36x9x.014 571 2,285 85 .23 1101-1/4” 1SB-020 1.85 48x7x.016 531 2,125 83 .31 1101 -1/2” 1SB-024 2.19 48x9x.016 472 1,887 87 .40 1102” 1SB-032 2.60 48x9x.020 505 2,022 89 .62 110a. Pressures listed have been reduced to account for welding as the method of attachment. Other methods such as brazing, neck-down designs or crimping will result in differentpressures. Contact the factory for details.b. Actual length may vary ± 20%.DS-EN-1000 (05)800-232-3539 610-367-2260 Fax 877-647-4011 www.penflex.com sales@penflex.com 9pflex.catalog_090403.indd 94/6/09 6:04:32 PM