PR 5334 Universal Thermocouple Transmitter - Thermo-Electra

PRetop5334B2-WIRE PROGRAMMABLE TRANSMITTERTC inputHigh measurement accuracyGalvanic isolationProgrammable sensor error valueFor DIN form B sensor head mountingApplication:• Linearised temperature measurement with TCsensor.• Amplification of bipolar mV signals to a 4...20mA signal, optionally linearised according to adefined linearisation function.Technical characteristics:• Within a few seconds the user can programPR5334B to measure temperatures within allTC ranges defined by the norms.• Cold junction compensation (CJC) with abuilt-in temperature sensor.• Continuous check of vital stored data forsafety reasons.Mounting / installation:• For DIN form B sensor head or DIN railmounting with a special fitting.• NB: As Ex barrier we recommend 5104B,5111B, or 5114B.Lerbakken 10 · DK-8410 RøndeTel. +45 8637 2677 · Fax +45 8637 3085www.prelectronics.dk

Electrical specifications:Specifications range:-40°C to +85°CCommon specifications:Supply voltage, DC ............................ 7.2...28 VDCInternal consumption ......................... 25 mW...0.8 WVoltage drop ....................................... 7.2 VDCIsolation voltage, test / operation....... 1.5 kVAC / 50 VACWarm-up time..................................... 5 min.Communications interface ................. Loop Link 5905Signal / noise ratio.............................. Min. 60 dBResponse time (programmable) ......... 1...60 sEEprom error check ........................... < 3.5 sSignal dynamics, input ....................... 18 bitSignal dynamics, output..................... 16 bitCalibration temperature...................... 20...28°CAccuracy, the greater of general and basic values:Input typeInput typeVoltTC type:E, J, K, L, N, T, UTC type:B, R, S, W3, W5General valuesAbsoluteaccuracyBasic valuesBasicaccuracy≤ ±10 µV≤ ±1°C≤ ±2°CTemperaturecoefficientAll ≤ ±0.05% of span ≤ ±0.01% of span / °CTemperaturecoefficient≤ ±1 µV/°C≤ ±0.05°C/°C≤ ±0.2°C/°CEMC immunity influence ............................ < ±0.5% of spanExtended EMC immunity:NAMUR NE 21, A criterion, burst............... < ±1% of spanEffect of supply voltage variation ....... < 0.005% of span / VDCVibration ............................................. IEC 68-2-6 Test FCLloyd’s specification no. 1.................. 4 g / 2...100 HzMax. wire size..................................... 1 x 1.5 mm2Humidity ............................................. < 95% RH (non-cond.)Dimensions......................................... Ø 44 x 20.2 mmTightness (enclosure / terminal) ......... IP68 / IP00Weight ................................................ 50 gElectrical specifications, input:Max. offset.......................................... 50% of selec. max. valueTC input:TypeBEJKLNRSTUW3W5Cold junction compensation .............. < ±1.0°CVoltage input:Measurement range ........................... -12...150 mVMin. span............................................ 5 mVInput resistance.................................. 10 MΩCurrent output:Signal range ....................................... 4...20 mAMin. signal range ................................ 16 mAUpdating time..................................... 440 msLoad resistance.................................. ≤ (V supply- 7.2) / 0.023 [Ω]Sensor error detection:Programmable.................................... 3.5...23 mANAMUR NE43 Upscale ...................... 23 mANAMUR NE43 Downscale.................. 3.5 mAEx data:Min.temperature+400°C-100°C-100°C-180°C-100°C-180°C-50°C-50°C-200°C-200°C0°C0°CMax.temperature+1820°C+1000°C+1200°C+1372°C+900°C+1300°C+1760°C+1760°C+400°C+600°C+2300°C+2300°CMin.span200°C50°C50°C50°C50°C100°C200°C200°C50°C75°C200°C200°CU i........................................................ 28 VDCI i......................................................... 120 mADCP i........................................................ 0.84 WL i........................................................ ≤ 10 µHC i........................................................ ≤ 1 nFNormIEC584IEC584IEC584IEC584DIN 43710IEC584IEC584IEC584IEC584DIN 43710ASTM E988-90ASTM E988-90EEx approval CENELEC:DEMKO 99 .......................................... ATEX 126963ATEX .................................................. 0539 II 1 GEEx ia IIC T1...T6Max. amb. temperature for T1...T4 .... 85°CMax. amb. temperature for T5 and T6 ... 60°CApplicable in zone .............................. 0, 1 or 2Observed authority requirements: Standard:EMC 89/336/EEC, Emission .............. EN 50 081-1, EN 50 081-2Immunity .............. EN 50 082-2, EN 50 082-1ATEX 94/9/EC..................................... EN 50 014 and EN 50 020Of span = Of the presently selected range5334BY101-UK (0040)