z/VM: TCP/IP Messages and Codes - z/VM - IBM

BOOTPD and DHCPD MessagesTCP0007IPrior error message refers to line line infileExplanation: The preceding error message indicatedan error in a machine file or configuration file. Thismessage identifies the line that caused the error.System Action:None.User or Operator Response:None.Source File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0103EUnable to establish the Event MonitorEnvironmentExplanation: An error prevented the enablement ofthe event monitor environment.System Action:User or Operator Response:server.The server shuts down.IPL CMS and restart theSource File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0007IPrior error message refers to statementstmtnumb in file. The statement in erroris: stmtExplanation: The preceding error message indicatedan error in a machine file or configuration file. Thismessage identifies the statement that caused the error.System Action:None.User or Operator Response:None.Source File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0101ERC=rc loading Machine file: fn ft fmExplanation: An unexpected return code was receivedwhen reading a machine file.System Action: The statements in the machine filewere not executed.User or Operator Response: You may receive a returncode that is the same as one of the return codes theFSREAD macro instruction. For more information onFSREAD and a complete list of the return codes itgenerates, see z/VM: CMS Macros and FunctionsReference.Source File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0106EUnable to read file: fileExplanation: An error occurred while attempting toread the specified file.System Action: Execution of the command orsubcommand terminates.User or Operator Response: This error indicates aproblem Verify access to the file and that the file can beread. After problems are corrected, reenter thecommand or subcommand that caused the file to beread.Source File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0107EUnable to start cyclic timer: timer token,RC=return code, RE=reason codeExplanation: An error occurred while attempting tostart a cyclic timer used by the server.System Action:The server shuts down.User or Operator Response: Correct the problem thatprevented the timer from being started and restart theserver. See z/VM: CMS Application Multitasking for moreinformation on the TimerStartInt function, its returncode, and reason codes.Source File:DHCPD EXECTCP0102ERC=rc trying to start communicationsExplanation: An error prevented the activation orreactivation of the UDP environment.System Action: If STAYUP mode is active, the serverwill wait a period ofUser or Operator Response: If STAYUP is not active,then IPL CMS and restart the server after you correctthe problem. time and attempt to activate the UDPenvironment. Otherwise, the server shuts down.Source File: BOOTPD EXEC for TCPBOO or DHCPDEXEC for TCPDHCTCP0110EUnable to write file: file Pipe rc=rcExplanation: An error occurred while attempting towrite to the specified file.System Action:DHCPD server shuts down.User or Operator Response: Verify access to the fileand that the file can be written. See z/VM: CMSPipelines Reference for more information on the '>>' PIPEstage return code. The most probable cause was thatthere was not enough disk space to update the DHCPDBINDINFO or DHCPDWRK BINDINFO file. Afterproblems are corrected, restart the DHCPD server.Source File:DHCPD EXEC2 z/VM: TCP/IP Messages and Codes