3.1.3 TC-net I/O Module List Type code Module name Function and SpecificationAI914 Analog input module 0~5V, 14 bit, 1 ms period, 4 ch/isolationAI918 Analog input module 0~5V, 14 bit, 0.5 ms period, 8 ch/isolationAI919 Analog input module 0~5V, 14 bit, 50 ms period, 16 ch/ non isolationAI929D Analog input module AI919 with distributor, 16 ch/non isolationTC919Thermocouple inputmoduleThermocouple (B, R, S, J, K, T, E type),Individual type or range setting is available on eachchannel, 16 ch/isolationRT918C RTD input module RTD: Pt100, JPt100, Individual type or range setting isavailable on each channel, 8 ch/isolationAO928 Analog output module 0~20 mA, 14 bit, response within 1 ms period, 8ch/isolationAO928F Analog output module 0~20 mA, 16 bit, response within 1 ms period, 8ch/isolationAO929 Analog output module 0~20 mA, 14bit,response within 20 ms period, 16 ch/nonisolationPI918 Pulse input module DC~50 Hz (contact)/DC~50 Hz, single pulse,12~24 V, 8 ch/isolationSpecial purpose TC-net I/O moduleFL911 FL-net module FL-net interfaceMD911 Modbus module Modbus-RTU (with RS232C port)Unified Controller nv series - Introduction24
I/OI/OI/OI/OI/OI/O3.1.4 TC-net I/O System ConfigurationControllerPS Module SIF TN ENTC-net I/O loop(TC-net 100)TC-net I/O bus adapter(SIO)I/OI/OI/OI/OSIOTC-net I/O ASIC(Fenix2)*SIOTC-net I/O bus(RS485)Existing I/OsI/OI/OI/OI/OSIOTC-net I/O loop(TC-net 100)TC-net I/O base(Terminal block type)*SIOExisting I/Os Intelligent serial PI/Os F series serial PI/Os G3 I/Os G2 I/OsTC-net I/O base(Terminal block type)Unified Controller nv series - Introduction25