www.Danatec.com 1.800.465.3366 2012 Product Catalogue

Recommendations

Info

Workplace Safety Training Programs QUANTITY PRICE 1 to 24 $95 .00 25 to 99 $80 .00 100 to 199 $70 .00 200 to 299 $60 .00 300 + $50 .00 WHY online training? • Effective online adult learning training • Easy set-up • Cost-effective • Interactive and user-friendly • 3D Virtual Electrical Workplace • Real pictures and video content of work tasks • Resource Toolbox available • Scenario based training exercises 30 www.Danatec.com 1.800.465.3366 Electrical Safety Training System (ESTS) CSA Z462 Workplace electrical safety Standard, Arc Flash & Shock Product Code 9290 Danatec has partnered with ESPS Electrical Safety Program Solutions Inc. (ESPS) to bring you the Electrical Safety Online Training System (ESTS). This course focuses on Workplace Electrical Safety and the effective management of the electrical hazards of arc flash and shock. It applies content from CSA Z462 Workplace Electrical Safety Standard to allow you to identify and quantify arc flash and shock hazards. It provides guidance on applying a Plan, Do, Check and Act philosophy when you have to work with energized electrical equipment. Occupational Health & Safety Regulatory requirements are also reviewed. A 3D Virtual Electrical Workplace (VEW) classroom allows for simulation based training and reviews concepts in CSA Z462 as well as establishing the proper administrative controls, working conditions and PPE. The course content includes the following modules: • Introduction • OH&S Regulations, Standards and Best Practices • Understanding Electricity in the Workplace • Electrical Hazards: Understanding the Danger • Electrical Hazard Analysis • Establishing an Electrical Safe Work Condition • Engineering and Administrative Controls • Electrical Specific PPE, Tools & Equipment – Selection & Management • Emergency Response, Incident Reporting and Program Maintenance Each module includes a Knowledge Check that utilizes interactive elements that will engage the student in the learning process. Printable resources are available and a detailed final exam utilizes enhanced scenario based questions where you interact with the Virtual Electrical Workplace classroom. The student will be provided with a wallet size certificate following completion of the course, provided they receive a 100% passing grade on the final test. Managing your employee’s online training: Danatec’s Learning Management System (LMS) automatically manages and tracks student progress and results, while logged into the training system. Record keeping is now easy, user-friendly and cost-efficient. Corporate Administrator Account Features: • Simple administered individual or bulk employee registration, self registration • Add, edit and view record information, training history and usage stats • Easily add additional courses to student profiles • Print and export a variety of reports, such as expired employees certifications • Print a copy of the student certificates • Purchase additional training courses online using VISA, Mastercard, or Amex • Bulk training discounts available • 100% fully customizable courses and corporate training sites Student Account Features: • 24/7, 365 days a year online training access • 30 days to complete the course and review content • Easy-to-use and simple registration – just login and begin training • Student cannot fast-forward to the exam – they must complete the course fully before writing the exam • Various resources throughout the training to enhance the learning experience • Printable Certificate of Completion • Ask the Instructor Feature
Electrical Safety Handbook for Arc Flash & Shock Product Code 9295 NEW! This Electrical Safety Handbook for Arc Flash and Shock is intended to be used in conjunction with a management system (e.g. see ANSI Z10 or CSA Z1000) based Electrical Safety Program that provides more detailed policies and practices for energized electrical work. This Handbook contains useful information with respect to the specification, care, use, maintenance, testing and pre-use inspection requirements of Electrical Specific PPE, Tools & Equipment that can be used to reduce exposure of risk to electrical shock and arc flash. The Handbook is intended to be used with the associated Inspection checklists for Electrical Specific PPE: Everyday Wear, and Arc Flash Suits. Tools & Equipment used must also be pre-use inspected by the user to ensure they are suitable for use. Electrical Specific PPE, Tools & Equipment should be inspected before every use, and when within an inventory management system they should be inspected at an acceptable frequency to ensure that when the PPE, Tools & Equipment are required they are available and fit for use. When an inventory inspection is performed the storage location, the use of separate storage bags, and tagging of lockers, storage bags, PPE, Tools & Equipment referenced in procedures and in PMs should be checked as well as ensuring where applicable that the PPE, Tool or piece of Equipment has been third party tested within acceptable frequencies. Where Electrical Specific PPE, Tools & Equipment are shared a Check In and Check Out system should be established and audited to ensure that it is being followed. For guidance on selecting suitable arc flash protective clothing and shock PPE, Tools & Equipment please refer to CSA Z462 Workplace electrical safety Standard or NFPA 70E Standard for Electrical Safety in the Workplace. It is noted that this Handbook doesn’t preclude the need for formal training (e.g. classroom, online, on the job) on the specification, care, use and maintenance of Electrical Specific PPE, Tools & Equipment. Additionally the Supervisor of the worker using the PPE, Tools & Equipment should complete Supervisory level inspections/audits to ensure that workers are competent in the care, use and maintenance requirements. The user of this Handbook should refer to the most recent versions of CSA Z462 and/ or NFPA 70E and should confirm Clause, Article and Table numbers referenced in this Handbook based on the current edition of the referenced Standard. This Electrical Safety Handbook for Arc Flash and Shock contains the following information: • Useful definitions related to arc flash and shock and associated electrical equipment. • Related figures and images including arc flash and shock hazards, boundaries, effects, flowcharts and example warning labels. • Look-up tables & checklists for PPE Tools & Equipment specifications, care, use and maintenance, approach boundaries and related technical information. Workplace Safety Training Programs QUANTITY PRICE 1 to 49 $9 .95 50 to 99 $9 .50 100 + $9 .00 1.800.465.3366 www.Danatec.com 31
Page 1 and 2: For all your educational and compli
Page 3 and 4: Table of Contents Introducing... ..
Page 5 and 6: Workplace Hazardous Materials Infor
Page 7 and 8: WHMIS Online Training Product Code
Page 9 and 10: WHMIS Handbook Product Code 2135 Al
Page 11 and 12: WHMIS “The Winning Label” VHS P
Page 13 and 14: WHMIS MSDS Handbook Product Code 21
Page 15 and 16: Transportation of Dangerous Goods T
Page 17 and 18: TDG Online Training Product Code 91
Page 19 and 20: TDG Class 7-Type B Packaging Online
Page 21 and 22: TDG Regulations Product Code 9120 T
Page 23 and 24: TDG - The Story of Safe Transport D
Page 25 and 26: Emergency Response Guidebook (Coil
Page 27 and 28: Class 1 Explosives Style Quantity I
Page 29 and 30: Class 7 Radioactives Style Quantity
Page 31: Ground Disturbance Online Training
Page 35 and 36: H2S Awareness Online Training Produ
Page 37 and 38: Fire Safety Awareness Online Traini
Page 39 and 40: Safety Moments Volume I Product Cod
Page 41 and 42: Safety Moments Volume III Product C
Page 43 and 44: Consulting Services Consulting Serv

www.Danatec.com 1.800.465.3366 2012 Product Catalogue

Create successful ePaper yourself

Delete template?

Save as template?