MEDIUM VOLTAGE - Elettro Italia

Catalogue Medium Low Voltage Voltage 20082010Transition jointsCHMPR 3-1Transition jointsfrom belted cable to polymeric cablesDimensionsType CHMPR3-1 hybrid transition jointsfor transition to three single-coreplastic-insulated cables are suitable forboth paper-insulated lead cables andHochstädter cables up to 17.5 kV.Padding kits for paper-insulated cablesare available for downwards enlargementof the operational area.L = LengthCharacteristics● Reliable stress control due to flexiblesilicone stress control elements● Wide conductor andcross-section range● Quick, safe and easy assembly● Ready for immediate operationTypemin. Ø over conductorinsulation afterremoval of outersemi-conducting layermmU 0/U (U m) 6/10 (12)kV - 8.7 /15 (17.5)kVCHMPR3-117kVApplication● Indoor● Outdoor● Underground● Water● Installation ducts● DuctworkNote● Compression connectors not included● The above-mentioned joints can alsobe used for voltages of 3.6/6 (7.2) kV.Please note changes to cross sectionrange.Crosssectionmm²12 kV 17.5 kVmax. Max.Ø of connectorconnector lengthmm mmStorage conditions/Shelf life● Unlimited shelf lifeScope of delivery● Spreader cap● Thick wall heat-shrinkable outer tubingwith hot melt adhesive● Oil barrier tubing● Heat-shrink tubing● Earthing wire● Copper braid tape● Pressure spring● Assembly accessories● Sealing tape● Stress control filling tape (blue)● Fire protection wrap● Assembly instructionsCrosssectionmm²max.Ø ofconnectormmMax.connectorlengthmmLmm Art.-No.35-50 12.6 50 - 95 25 145 35 - 50 20 110 1100 19760370-240 17.3 95 - 300 34 145 70 - 240 34 145 1100 197604240-400 23.1 300 - 400 42 170 240 - 400 42 170 1100 197606Cable accessories for paper-insulated cablesAppropriate compression connectors must be ordered separately.Padding kits must be ordered separately.Additional remarks: Padding kit PS(G+H)17/1 (Art.-No.197690) to be used with Art.-No. 197604 sur 35-50mm² (17.5kV) and 35-70mm² (12kV).www.cellpack.com61