KaVo INTRAsurg® 300 - Sybron Implant Solutions

KaVo INTRAsurg ®
300
Simple to operate and easy to customize • Variable speed foot control
Ultimate speed and torque ranges • Sterilizable motor and tubing
celebrating 100 years as the world leader
in dental handpieces and dental equipment.

Intrasurg ®
300 is an ideal surgical unit for
implantology and is full of innovative nuances
to streamline surgical procedures.
• Unique brushless motor design with minimum vibration
ensures comfortable handling for prolonged periods of time
• Powerful and efficient; high torque range of 5-55 Ncm and
wide speed motor range of 300-40,000 rpm
• Automatic motor stop at preset torque value, acoustic signal
when 90% of preset value is reached
• Super quiet built-in irrigation system
• Tubing and motor are fully autoclavable
• full compatibility with surgical KAVO straight and contraangle
handpieces
Intuitive Pre-Programmed Settings (fully adjustable)
STEP 1 2 3 4 5 6
TREATmENT
STAgE
Drilling the
osteotomy
Cutting the
thread
Cutting
instrument
counterclockwise
Tapping
implant
Removing
the insertion
pin
HANdPIEcE 27:1 27:1 27:1 27:1 27:1 27:1
FAcToRy
SETTINg
mAX SPEEd
1,500 50 50 50 50 50
Mounting
the
coverscrew/
healing
abutment
ToRQUE 55 Ncm 40 Ncm 40 Ncm 40 Ncm 55 Ncm 10 Ncm
PUmP 4 3 3 3 0 0
moToR
dIREcTIoN
EXcLUSIVE FEATURES
To
• Display screen shows actual speed and
torque for utmost safety and control
• flushing mechanism to prevent
crystallization of tubing
• Self-calibrating
(no yearly calibration required)

• Modern contra-angle handpiece has a separate head (3:1) and shank (9:1)
for a total reduction of 27:1. This unique design allows for a wide range of
applications from smoothing of the alveolar ridge to implant placement.
• Highly efficient operating speed range of 11-1,500 rpm and maximum
torque 55 Ncm
• Internal and external cooling functions ensure ease of sterilization and
longevity of handpiece
• Small head design provides for maximum visibility in the mouth and aids
in treatment efficiency
cLINIcAL PRocEdURE
SPEEd
mAX. ToRQUE
REQUIREd
Smoothing of the alveolar crest 1000 - 1500 rpm 5 - 10 Ncm
Drilling of the osteotomy 700 - 1500 rpm up to 15 Ncm
Thread cutting
- Standard implants
- Large diameter
Screwing in implant
- Standard implant
- Large diameter
10 - 50 rpm
10 - 50 rpm
up to 35 Ncm
up to 50 Ncm
up to 35 Ncm
up to 50 Ncm
Prosthetics 10 - 50 rpm up to 35 Ncm
• Variable speed foot pedal allows for adjustments in motor speed without
changing pre-programmed settings.
• foot pedal conveniently controls all console functions allowing for
complete hands-free operation.

KaVo INTRAsurg ®
300
Technical Data
UNIT
Size 31 cm x 23 cm x 12.5 cm
Input Voltage
100 V; 120 V; 230 V
50/60 Hz
Rinse function Motor is switched off; only the pump operates
Display in
standby mode
Speed range; motor direction;
Instrument gear transmission
Max. pump torque (1-6)
Display during use Actual speed, actual torque
foot control
moToR KaVo INTRA - S 500
Motor on/off; Speed (min. - max.); Clockwise/
counterclockwise operation; Pump on/off;
Rinse function; Switch on program;
Select program step (forward/back)
Motor speed min. 300 rpm; max. 40,000 rpm
Torque
Output power 100 W
Full One Year Warranty
PART # dEScRIPTIoN
1001.3440
5.5 Ncm (300 - 12,000 rpm)
5.0 - 2.0 Ncm (12,000 - 40,000 rpm)
SybrOn - Celebrating over 100 years of dental excellence
www.sybronimplants.com
Ordering Details:
IntraSurg 300 Surgical System
(System includes a single set of pump tubing and irrigation tubing)
1001.4503 Kavo Surgical Reducing Head 3:1 (C3)
1001.2278 Kavo Surgical Reducing Shank 9:1 (C09)
1001.3347 IntraSurg 300 pump tubing
1001.9902 IntraSurg 300 pre-sterilized irrigation tubing - 10pk
1001.2651 IntraSurg 300 Autoclaveable tubing
Headquarters
SoFTwARE
Programs 1 program with 6 steps
Program functions
Instrument gear transmission 1:2 to 36:1
Max. speed 15 - 40,000 rpm
Max. torque 5.5 to 55 Ncm
Pump power 0 to 6
Motor direction Clockwise/counterclockwise
Torque
Max. torque selectable;
acoustic signal emitted on reaching 90%
coNTRA-ANgLE HANdPIEcE KaVo INTRA c3-c09
Total gear reduction
Cooling
Max. torque 55 Ncm
Max. working speed 1,500 rpm
1717 West Collins Avenue
Orange, California 92867 USA
t 714.516.7800
27:1 (INTRA C3 head = 3:1;
INTRA C09 shank = 9:1)
External and internal cooling
(Kirschner and Meyer)
The INTRAsurg ®
300 is manufactured by
InternatIonal
Europe
Sybron Implant Solutions GmbH
Julius-Bamberger-Str. 8a
28279 Bremen Germany
t 49.421.43939.0
United Kingdom
Sybron Implant Solutions U.K.
Suite 5 & 6, Tadcaster House
Kempton Road Keytec 7 Business Park
Pershore, Worcestershire, WR10 2TA
t 44.1386.561.845
France
Sybron Implant Solutions France
16 Rue Du Sergent Bobillot
93100 Montreuil
t 33.149.88.60.85
Australia
Sybron Implant Solutions Pty
Unit 10, 112-118 Talavera Road
North Ryde, NSW 2113
t 61.2.8870.3099
8K-001 Rev. A