a. pharmaceuticals (finished products) for all ... - Iraq Watch

Glass Bottle Dropper299 Glass bottle droppers 15 ml , round ,amber finish 18 mm(drawing no . 7B809)Specifications:1-Glass bottles to be from glass type III2-Glass bottles should meet the limit test of alkalinity(Analytical certificate is required).3-Transmission of light & chemical resistance of amberglass bottles & specifications to be according to USPXXI.4- Bottles :Finish 19.4 mm, capacity 15 ml ,weight 19-21 gmbody diameter 26-27 mm height 56.7 – 57.7mm .5-Bottles to be arranged as 221 pcs/pack (13x17) ,6 packs /layer ,19layers/palette (25194 pcs/pal)packswith the finish upside down .6-Palette: dimensions 1200/800 , height 1320 mm weight550 kg.7- Covering : 10 pcs pads in between each 2 layers withdimensions 1195x795 mm10 pcs trays with 1195x100 mm dimensions arrangedin the bottom, then on the 3,5,7,9,11,13,15,17,19 layer .Totally covered by double plastic foil 2120/1900/0.25Shrink warped & stripped , labels contains all theIn formations To be stacked on outer sides.300 Un graduated glass dropper , composed of glass tube ,Black butyl rubber leucolene teat, black Bakelite cap.18mm& must be assembled1-Glass dropper to be from glass type III2-Glass droppers to fit with glass bottle dropper 15 mlfinish 18 mm ( drawing no. SDI-19 – improved ) .3- Enclosed samples of glass droppers to be suppliedaccordingly .4-To be packed in a well closed nylon sac of 1000 pcs &each 2 saces packed in a strong worthy export corrugatedcard board carton in non return shrink warp palette , withlarge outer labels on cartons & palettes Contained allin formations with quantities inside .93