a. pharmaceuticals (finished products) for all ... - Iraq Watch

302 Un graduated glass dropper for 12 ml glass bottle dropper ,composed of Un graduated white bent glassTube , blue teat, white Bakelite cap & to be assembled Together.Specifications:1-Glass dropper to be from glass type III2-Outer diameter of the glass tube to be 5 mm(+0.25,-0.25)mm the clearance distance between the glasstube nazzle & inside bottom of the glass bottle dropperto be 1.5 – 2 mm after closing .3-Blue leucolene teat to be made from butyl rubber &Have :-Weight of 2.1-2.2 gm to prevent floating of droppers onWashing solution total length 23.5 (+0.5,-0.5) mm4-The glass tube , rubber teat ,to be well fitted into theBakelite cap to ensure no movement or separation ofEach .5-Complete droppers( teat ,Bakelite cap & glass tube).Have to bear autoclaving at 122C for 30 minEnclosed samples of 100 sampled glass bottle withDroppers is required .Samples of 200 sampled glass droppers is requiredFor evaluation .To be packed in a well closed nylon sac of 1000 pcs& each 2 saces packed in a strong worthy exportcorrugated card board carton in non return shrinkwarp palette , with large in non return shrink warpPalette , with large outer labels on cartons & palettesContained all in formations with quantities inside.4-Tubes to be packed in corrugated cartons withoutdivisions of 250 pcs/each & repacked in wooden caseswith outer side printed with all in formations & quantityin side, Inner sides carton dimensions :(length 293 x width 148 x height105mm)5-In addition assembled thin carton divisions is needed &to be used inside the above cartons for packing 200 tubesof the finished product , the division are with thefollowing dimensions:a- Partition with 15 slots size 290 x 65 mmb- Partition with 9 slots size 140 x 65 mm .Each 19 partitions of size (140 x 65 mm) & 9 PartitionsOf size (290 x 65mm) to be assembled together in one division (set) .6- Packing:- Each 100 sets (assembled divisions) to bepacked in a worthy export strong corrugated carton &Palletized , large in formation lable on the carton outerSide is needed .95