Blades for Small-Bone Power Systems

MicroAire® & Linvatec® Blades, Burs, Rasps, Pins and DrillsBlades for 4Large Power SystemsBlades for 22Small Power SystemsSternum Saw Blades 39Burs 42Rasps 50K-Wires and 52Steinmann PinsTwist Drills 54and Taps2 3

Blades for Large-Bone Power SystemsBlades for Large-Power SystemsMicroAire® was the first company to offer double-sterile-packaged replacement large-power blades,and our commitment to value pricing and first-class service continues today.MicroAire® is proud to offer the best selection of blades for large-power systems on the market today.For use with the following instruments:Part number prefixes:MicroAire® Series 7000Hall® PowerPro®, Versipower® and Series 4, PowerPro, M-Power, M-Power 2Stryker® System 2000, System 4, System 5 and System 6Synthes® Compact Air Drive, Power Drive, Air Power Line, and Battery Power LineZOZRSOSRAOMicroAire® and Hall® OscillatingMicroAire® and Hall® ReciprocatingStryker® OscillatingStryker® ReciprocatingSynthes®StableCut®Aggressive OffsetXXPatented tooth designXXAggressive angles cut along a straight pathXXIncreased ejection of debrisXXDecreased friction reduces bone necrosis and implant failureXXTop choice of implant companies and orthopedic surgeonsPhotoEtch AggressiveXXStainless steel photo-chemically etchedinto a dual-thickness bladeXXTwo rows of aggressive-angled teethXXDual thickness reduces friction when usedwith a slotted cutting guideDiamond GroundXXTooth geometry similar to PhotoEtch Aggressive bladeXXTwo rows of teeth formed by bending alternating teethaway from the surface of the bladeStandard OffsetXXTooth geometry similar to Diamond-Ground bladesXXTwo rows of teeth formed by bending alternating teethaway from the surface of the bladeD-Cut ReplacementXXSmall “double-teeth” on a straight path instead of a radiusXXChannels between teeth help to move materialaway from cutting surfaceXXTooth pattern is cut into bladeXXAngles are ground into the faces of teethXXTwo rows of sharp teethXXCutting thickness is same as the blade itselfReciprocating BladesXXUsed in total hip and total joint arthroplastyXXAvailable in both single- and double-edged patterns4microaire.com

Blades for Large-Bone Power SystemsOscillating Saw Blades • MicroAire® & Linvatec® D-Cut®MicroAire® Large-Power SawsHall® Large-Power SawsPart No.ZO11-089-09080706050ZO11-089-0904030Width2010UsableLengthCutThicknessMaterialThickness11 mm 90 mm 0.89 mm 0.89 mm 16TPIMicroAire® & Linvatec® Oscillating Saw BladesZO11-119-09011 mm 90 mm 1.19 mm 1.19 mm161020304050607080ZO11-119-090ZO11-127-09011 mm 90 mm 1.27 mm 1.27 mm 161020304050607080ZO11-127-090ZO18-089-09018 mm 90 mm 0.89 mm 0.89 mm 161020304050607080ZO18-089-090ZO18-127-09018 mm 90 mm 1.27 mm 1.27 mm 161020304050607080ZO18-127-090ZO18-127-10018 mm 100 mm 1.27 mm 1.27 mm 16102030405060708090ZO18-127-100To search by manufacturer part number or dimensions, visit www.microaire.com 5

Blades for Large-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®Part No.ZO18-135-090ZO25-089-07580807070605060ZO18-135-09040503040203010Width2010UsableLengthCutThicknessMaterialThickness18 mm 90 mm 1.35 mm 1.35 mm 1625 mm 75 mm 0.89 mm 0.89 mm 16TPIZO25-089-075ZO25-089-09025 mm 90 mm 0.89 mm 0.89 mm 161020304050607080ZO25-089-090ZO25-107-09025 mm 90 mm 1.07 mm 1.07 mm 161020304050607080ZO25-107-090ZO25-119-09025 mm 90 mm 1.19 mm 1.19 mm 161020304050607080ZO25-119-090ZO25-127-09025 mm 90 mm 1.27 mm 1.27 mm 161020304050607080ZO25-127-0906microaire.com

Blades for Large-Bone Power SystemsPart No.ZO25-127-100ZO25-135-0908090ZO25-127-10070807060605050404030WidthUsableLengthCutThicknessMaterialThickness25 mm 100 mm 1.27 mm 1.27 mm 1630201025 mm 90 mm 1.35 mm 1.35 mm 162010TPIMicroAire® & Linvatec® Oscillating Saw BladesZO25-135-090ZO25-147-09025 mm 90 mm 1.47 mm 1.47 mm 161020304050607080ZO25-147-090Oscillating Saw Blades • MicroAire® & Linvatec® Stable Cut®MicroAire® Large-Power SawsHall® Large-Power SawsPart No.WidthUsableLengthCutThicknessMaterialThicknessTPIZO-7222225.4 mm 90 mm 1.27 mm 1.27 mm 122030405060708090ZO-72222To search by manufacturer part number or dimensions, visit www.microaire.com 7

Blades for Large-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®Part No.ZO-72622ZO-72623909080ZO-72622807070606050504040303020WidthUsableLengthCutThicknessMaterialThickness25.4 mm 90 mm 1.19 mm 1.19 mm 1225.4 mm 90 mm 1.27 mm 1.27 mm 1220TPIZO-72623ZO-7262525.4 mm 90 mm 1.35 mm 1.35 mm 122030405060708090ZO-72625ZO-7268925.4 mm 90 mm 0.89 mm 0.89 mm 1220304050607080ZO-72689ZO-7270921.3 mm 90 mm 1.0 mm 1.0 mm 122030405060708090ZO-72709ZO-7271912.7 mm 90 mm 1.19 mm 1.19 mm 1220304050607080ZO-727198microaire.com

las reformas propuestas. En efecto, las reformas político-electorales no puedenconsiderarse fuera de su contexto socioeconómico, histórico y cultural por lasencilla razón de que una misma institución funciona de forma diferente segúnel contexto en el que se encuentre. Así lo confirman las evidencias empíricasde los últimos años en materia de reforma política.Resumiendo, por qué debemos reformar, para qué queremos reformar, y quédebemos reformar, asegurándonos siempre que las medidas propuestas seancoherentes con el problema que deseamos solucionar, y que al mismo tiempoguarden relación con el contexto dentro del cual habrán de operar, son lascuestiones claves que deben guiar todo proceso de reforma político-electoral.1. 4. Como corolario de reclamos sociales y políticos, en el orden nacional esaprobada en diciembre de 2009, la Ley 26.571 de Democratización de laRepresentación Política, la Transparencia y la Equidad Electoral, que introduceimportantes cambios en orden a mecanismos de selección de candidaturas,(primarias, abiertas y simultáneas), modificaciones en torno a los partidospolíticos, esencialmente, nuevos requisitos para la obtención y conservación dela personería jurídica 10 . Pero tal vez, el tema más importante (y positivo) de lareforma legislativa, es el nuevo régimen de financiamiento de campañas laspolíticas 11 .2.- REFORMA POLÍTICA Y RÉGIMEN ELECTORAL. EN SANTA FE NO HAYREFORMA POLÍTICA SIN REFORMA CONSTITUCIONAL.10 Para un análisis de la Ley 26.571 puede verse, STRAFACE, Fernando y PAGE, María M.:“Reforma política 2009: ¿cómo impacta en el sistema de partidos y en los electores?”,Documento de Políticas Públicas/Análisis Nro. 71 CIPPEC, Bs.As., diciembre de 2009.11 Puede consultarse sobre financiamiento de las campañas electorales referido a la Ley26.571 y en el marco del Observatorio Electoral Argentino (OEAR), el trabajo de POMARES,Julia y PAGE, María: “Candidato, ¿qué bien se TV? Una evaluación del nuevo régimen depublicidad audiovisual en las elecciones de 2011”, Programa de Política y Gestión de GobiernoÁrea de Gestión Pública, Documento de Políticas Públicas, Recomendación Nro. 100, CIPPEC,Diciembre de 2011.8

Blades for Large-Bone Power SystemsOscillating Saw Blades • All MicroAire® & Linvatec® (Except D-Cut®)MicroAire® Large-Power SawsHall® Large-Power SawsPart No.ZO-7050WidthUsableLengthCutThicknessMaterialThickness49 mm 63 mm 0.9 mm 0.64 mm 18TPIMicroAire® & Linvatec® Oscillating Saw BladesZO-7050ZO-705213 mm 64 mm 0.9 mm 0.64 mm 18ZO-7052ZO-705319.5 mm 63 mm 0.9 mm 0.64 mm 18ZO-7053ZO-705533.1 mm 71 mm 1.6 mm 1.20 mm 18ZO-7055ZO-711125.4 mm 90 mm 1.4 mm 1.27 mm 12ZO-7111To search by manufacturer part number or dimensions, visit www.microaire.com 11

Blades for Large-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®Part No.ZO-7123ZO-7145ZO-7123ZO-7145WidthUsableLengthCutThicknessMaterialThickness19.1 mm 95 mm 1.27 mm 1.27 mm 1010.7 mm 30 mm 1.10 mm 0.64 mm 18TPIZO-715133.3 mm 63 mm 0.90 mm 0.64 mm 18ZO-7151ZO-715419.5 mm 71 mm 1.40 mm 1.20 mm 18ZO-7154ZO-715632 mm 64 mm 1.00 mm 0.79 mm 18ZO-7156ZO-716125.4 mm 90 mm 1.27 mm 1.27 mm 10ZO-716112microaire.com

Blades for Large-Bone Power SystemsPart No.ZO-7163ZO-7165ZO-7163WidthUsableLengthCutThicknessMaterialThickness25.4 mm 90 mm 1.37 mm 1.37 mm 1025.4 mm 90 mm 1.47 mm 1.47 mm 10TPIMicroAire® & Linvatec® Oscillating Saw BladesZO-7165ZO-716631.5 mm 64 mm 1.00 mm 0.79 mm 10ZO-7166ZO-716719.5 mm 90 mm 1.20 mm 1.20 mm 10ZO-7167ZO-717219.5 mm 71 mm 1.00 mm 0.79 mm 18ZO-7172ZO-718010 mm 80 mm 1.27 mm 1.27 mm 1220304050607080ZO-7180To search by manufacturer part number or dimensions, visit www.microaire.com 13


Blades for Large-Bone Power SystemsPart No.ZO-7243ZO-7244ZO-7243WidthUsableLengthCutThicknessMaterialThickness25.4 mm 90 mm 1.00 mm 0.79 mm 1025.4 mm 90 mm 1.5 mm 1.5 mm 10TPIMicroAire® & Linvatec® Oscillating Saw BladesZO-7244ZO-724512.7 mm 70 mm 1.40 mm 1.27 mm 12ZO-7245ZO-724625.4 mm 90 mm 1.00 mm 0.9 mm 12ZO-7246ZO-725012.7 mm 70 mm 1.40 mm 0.9 mm 16ZO-7250ZO-725112 mm 90 mm 1.35 mm 1.35 mm 12ZO-7251To search by manufacturer part number or dimensions, visit www.microaire.com 15


Blades for Large-Bone Power SystemsPart No.ZO-7377ZO-7380ZO-7377WidthUsableLengthCutThicknessMaterialThickness25.4 mm 90 mm 1.5 mm 1.5 mm 1219 mm 85 mm 1.37 mm 1.37 mm 12TPIMicroAire® & Linvatec® Oscillating Saw BladesZO-7380ZO-739019 mm 90 mm 1.37 mm 1.37 mm 12ZO-7390ZO-759519.5 mm 90 mm 0.90 mm 0.90 mm 10ZO-7595ZO-759625.4 mm 90 mm 0.90 mm 0.90 mm 10ZO-7596ZO-765125.0 mm 90 mm 1.19 mm 1.19 mm 12ZO-7651To search by manufacturer part number or dimensions, visit www.microaire.com 17

Blades for Large-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®Part No.ZO-7654ZO-7682ZO-7654WidthUsableLengthCutThicknessMaterialThickness13.00 mm 90 mm 1.19 mm 1.19 mm 1219.1 mm 90 mm 1.27 mm 1.27 mm 12TPIZO-7682ZO-768519.1 mm 105 mm 1.19 mm 1.19 mm 121020304050MM60708090ZO-7685ZO-768912.7 mm 90 mm 0.89 mm 0.89 mm 12ZO-7689ZO-771825.4 mm 105 mm 1.24 mm 1.24 mm 12ZO-7718ZO-640 30.5 mm 50 mm 1.0 mm 1.64 mm 1218microaire.com

Blades for Large-Bone Power SystemsPart No.MO-121MO-122MO-121WidthUsableLengthCutThicknessMaterialThickness15.2 mm 50 mm 1.60 mm 0.9 mm 1031.5 mm 50 mm 1.60 mm 0.9 mm 10TPIOscillatingSaw Blades3M®/Linvatec®Power Instruments(Models Maxi-Driver® G120A,L120A and Maxion E220)MicroAire® & Linvatec® Oscillating Saw BladesMO-122MO-12315.7 mm 50 mm 1.1 mm 0.6 mm 13MO-123MO-12431.5 mm 50 mm 1.1 mm 0.6 mm 12MO-124MO-125 6.6 mm 20 mm 1.0 mm 0.6 mm 15To search by manufacturer part number or dimensions, visit www.microaire.com 19

Blades for Large-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®3M®/Linvatec®Power Instruments(Models Maxi-Driver® G120A,L120A and Maxion E220)Part No.MO-126MO-127MO-126WidthUsableLengthCutThicknessMaterialThickness14.5 mm 50 mm 1.5 mm 0.9 mm 1231.5 mm 50 mm 1.60 mm 0.9 mm 12TPIMO-127MO-12829.5 mm 50 mm 1.60 mm 0.6 mm 22MO-128MO-12915.5 mm 50 mm 0.9 mm 0.6 mm 22MO-12920microaire.com

Blades for Large-Bone Power SystemsReciprocating Saw BladesMicroAire® Large-Power SawsHall® Large-Power SawsPart No.WidthUsableLengthCutThicknessMaterialThicknessZR-058 7.9 mm 87.9 mm 1.0 mm 0.64 mm 18TPIMicroAire® & Linvatec® Reciprocating Saw BladesZR-059 6.4 mm 52.8 mm 1.0 mm 0.64 mm 18ZR-060 7.6 mm 38.1 mm 0.60 mm 0.38 mm 33ZR-061 7.9 mm 83.3 mm 1.8 mm 1.27 mm 18ZR-073 12.7 mm 73.5 mm 0.90 mm 0.80 mm 20ZR-079 12.7 mm 76 mm 0.90 mm 0.90 mm 16ZR-160 4.8 mm 38.1 mm 0.50 mm 0.38 mm 24To search by manufacturer part number or dimensions, visit www.microaire.com 21

Blades for Small-Bone Power SystemsBlades for Small-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®OscillatingSaw BladesMicroAire® Oscillating Saw(Models 1700, 1710, 1970, 2700,2710, 6700, and 6710)CautIOn:Do not use the long 1200Series sagittal blades inthese models of oscillatingsaws, as they will overstressthe oscillating mechanism.Part No.WidthUsableLengthCutThicknessMaterialThickness1700-001 10 .2 mm 11 mm 0.5 mm 0.3 mm 361700-002 10.2 mm 12 mm 0.5 mm 0.3 mm 361700-003 12.7 mm 16 mm 0.5 mm 0.3 mm 361700-007 10.2 mm 12 mm 0.5 mm 0.3 mm 36TPI1700-008 10 .2 mm 11 mm 0.5 mm 0.3 mm 361700-009 10.2 mm 10 mm 0.5 mm 0.3 mm 361700-010 10.2 mm 9 mm 0.5 mm 0.3 mm 361700-012 10.2 mm 9 mm 0.5 mm 0.3 mm 361700-013 9.1 mm 7 mm 0.5 mm 0.3 mm 3622microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZO-060 5.8 mm 12 mm 0.6 mm 0.4 mm 36ZO-061 9.6 mm 12 mm 0.6 mm 0.4 mm 36ZO-062 5.8 mm 18.5 mm 0.6 mm 0.4 mm 36ZO-063 9.6 mm 18.5 mm 0.6 mm 0.4 mm 36ZO-064 5.8 mm 28.5 mm 0.6 mm 0.4 mm 36TPIOscillatingSaw BladesMicroAire® andHall® Oscillating Saw(Models 1740, 1972,2740, and 6740)CautIOn:These blades cannot beused in MicroAire® oscillatingsaw models 1700, 1710, 1970,1975, 1976, 2700, 2710,6700, and 6710.MicroAire® & Linvatec® Oscillating Saw BladesZO-065 9.6 mm 28.5 mm 0.6 mm 0.4 mm 36ZO-066 18.5 mm 28.5 mm 0.6 mm 0.4 mm 36ZO-067 5.8 mm 13.5 mm 0.6 mm 0.4 mm 36ZO-068 9.6 mm 13.5 mm 0.6 mm 0.4 mm 36ZO-069 9.6 mm 13.5 mm 0.6 mm 0.4 mm 36To search by manufacturer part number or dimensions, visit www.microaire.com 23

Blades for Small-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®MicroAire® andHall® Oscillating Saw(Models 1740, 1972,2740, and 6740)CautIOn:These blades cannot beused in MicroAire® oscillatingsaw models 1700, 1710, 1970,1975, 1976, 2700, 2710,6700, and 6710.Part No.WidthUsableLengthCutThicknessMaterialThicknessZO-070 9.1 mm 11.9 mm 0.6 mm 0.4 mm 33ZO-071 14 mm 25.4 mm 0.6 mm 0.4 mm 33TPIZO-072 27.4 mm 31.7 mm 0.6 mm 0.4 mm 33ZO-073 9.6 mm 31.0 mm 0.6 mm 0.4 mm 36ZO-07645 mm 16 mm 0.6 mm 0.4 mm 22ZO-076ZO-077 9.4 mm 40.1 mm 0.6 mm 0.4 mm 22ZO-165 9.7 mm 28.5 mm 0.6 mm 0.4 mm 3624microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-360 5.5 mm 12 mm 0.5 mm 0.4 mm 34ZS-361 10 mm 12 mm 0.5 mm 0.4 mm 34ZS-362 5.5 mm 18.5 mm 0.5 mm 0.4 mm 34TPIOscillatingSaw BladesMicroAire® andHall® Oscillating Saw(Models 1975 and 1976)MicroAire® & Linvatec® Oscillating Saw BladesZS-363 10 mm 18.5 mm 0.5 mm 0.4 mm 34ZS-364 5.5 mm 28.5 mm 0.5 mm 0.4 mm 36ZS-365 10 mm 28.5 mm 0.6 mm 0.5 mm 36ZS-366 18.5 mm 28.5 mm 0.4 mm 0.6 mm 34ZS-367 5.8 mm 13.5 mm 0.6 mm 0.4 mm 36ZS-368 9.6 mm 13.5 mm 0.6 mm 0.4 mm 36ZS-369 10 mm 35 mm 0.4 mm 0.6 mm 34To search by manufacturer part number or dimensions, visit www.microaire.com 25

Blades for Small-Bone Power SystemsOscillating Saw Blades MicroAire® & Linvatec®OscillatingSaw BladesMicroAire® andHall® Oscillating Saw(Model 1976)Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-370 9.1 mm 11.9 mm 0.6 mm 0.4 mm 33ZS-371 14 mm 25.4 mm 0.6 mm 0.4 mm 33TPIZS-372 27.4 mm 27.9 mm 0.6 mm 0.4 mm 33ZS-373 13.5 mm 29 mm 0.6 mm 0.4 mm 3326microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-015 5.8 mm 15 mm 0.6 mm 0.4 mm 22ZS-030 19.1 mm 25.4 mm 0.6 mm 0.4 mm 22TPISagittalSaw BladesMicroAire® Coarse-ToothSagittal Saw BladesMicroAire® andHall® Sagittal Saw(Models 1955, 2250,6250, 6670, and 6673)MicroAire® & Linvatec® Sagittal Saw BladesZS-031 19.1 mm 41 mm 0.6 mm 0.4 mm 22ZS-032 5.8 mm 25.4 mm 0.6 mm 0.4 mm 22ZS-033 14 mm 41 mm 0.6 mm 0.4 mm 22ZS-034 5.8 mm 8.9 mm 1.0 mm 0.6 mm 22ZS-035 5.8 mm 17.3 mm 1.0 mm 0.6 mm 22To search by manufacturer part number or dimensions, visit www.microaire.com 27

Blades for Small-Bone Power SystemsSagittal Saw Blades MicroAire® & Linvatec®MicroAire® Coarse-ToothSagittal Saw BladesMicroAire® andHall® Sagittal Saw(Models 1955, 2250,6250, 6670, and 6673)Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-036 14 mm 16 mm 1.0 mm 0.6 mm 18ZS-037 14 mm 25.5 mm 0.6 mm 0.4 mm 22TPIZS-043 9.4 mm 24.9 mm 0.6 mm 0.4 mm 18Sagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesMicroAire® Fine-ToothSagittal Saw BladesMicroAire® andHall® Sagittal Saw(Models 1955, 2250,6250, 6670, and 6673)Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-018 9.7 mm 24.1 mm 0.6 mm 0.4 mm 36ZS-027 19.1 mm 41 mm 0.6 mm 0.4 mm 36TPIZS-028 9.4 mm 7.1 mm 0.6 mm 0.4 mm 3628microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-029 9.4 mm 13.5 mm 0.6 mm 0.4 mm 36ZS-038 9.4 mm 25.5 mm 0.6 mm 0.4 mm 36TPISagittalSaw BladesMicroAire® Fine-ToothSagittal Saw BladesMicroAire® andHall® Sagittal Saw(Models 1955, 2250,6250, 6670, and 6673)MicroAire® & Linvatec® Sagittal Saw BladesZS-038A 9.4 mm 25.5 mm 0.6 mm 0.4 mm 18XZS-038 9.5 mm 25.5 mm 1.0 mm 0.8 mm 36ZS-039 4.5 mm 25.5 mm 0.5 mm 0.4 mm 36ZS-040 9.4 mm 41 mm 0.6 mm 0.4 mm 36ZS-041 5.8 mm 33.8 mm 0.6 mm 0.4 mm 36To search by manufacturer part number or dimensions, visit www.microaire.com 29

Blades for Small-Bone Power SystemsSagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesMicroAire® Fine-ToothSagittal Saw BladesMicroAire® andHall® Sagittal Saw(Models 1955, 2250,6250, 6670, and 6673)Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-042 4.3 mm 35.6 mm 0.6 mm 0.4 mm 36ZS-104 9.4 mm 15 mm 0.6 mm 0.4 mm 36TPIZS-128 10.4 mm 8.1 mm 0.6 mm 0.5 mm 36ZS-129 10.4 mm 13.5 0.6 mm 0.6 mm 36Sagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesMicroAire® and Hall® SagittalSaw(Models 1950, 1955, 2250,6670, 6672, and 6673Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-304 9.4 mm 15 mm 0.6 mm 0.4 mm 36ZS-318 9.5 mm 25.5 mm 0.5 mm 0.4 mm 31TPIZS-327 19.1 mm 40.9 mm 0.6 mm 0.4 mm 3630microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-329 9.5 mm 12 mm 0.6 mm 0.4 mm 34ZS-330 19.5 mm 25.5 mm 0.6 mm 0.4 mm 18TPISagittalSaw BladesMicroAire® and Hall® SagittalSaw(Models 1950, 1955, 2250,6670, 6672, and 6673MicroAire® & Linvatec® Sagittal Saw BladesZS-331 19.5 mm 41 mm 0.6 mm 0.4 mm 18ZS-332 5.5 mm 25.5 mm 0.6 mm 0.4 mm 18ZS-333 14 mm 41 mm 0.6 mm 0.4 mm 18ZS-334 5.8 mm 9 mm 1 mm 0.6 mm 22ZS-336 14 mm 15.5 mm 0.9 mm 0.6 mm 18To search by manufacturer part number or dimensions, visit www.microaire.com 31

Blades for Small-Bone Power SystemsSagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesMicroAire® and Hall® SagittalSaw(Models 1950, 1955, 2250,6670, 6672, and 6673Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-337 14 mm 25.5 mm 0.6 mm 0.4 mm 18ZS-338 9.5 mm 25.5 mm 0.5 mm 0.4 mm 34TPIXZS-338 9.5 mm 25.5 mm 1.0 mm 0.8 mm 34ZS-339 4.5 mm 25.5 mm 0.5 mm 0.4 mm 34ZS-340 9.5 mm 41 mm 0.5 mm 0.4 mm 34ZS-341 6 mm 34 mm 0.5 mm 0.4 mm 34ZS-342 4 mm 34 mm 0.5 mm 0.4 mm 34ZS-343 9.5 mm 25.5 mm 0.6 mm 0.4 mm 1832microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-103 7 mm 15 mm 0.4 mm 0.4 mm 32ZS-105 9 mm 18.5 mm 0.4 mm 0.4 mm 32ZS-114 7 mm 18.5 mm 0.4 mm 0.4 mm 32TPISagittalSaw BladesMicroAire® TPS, CORE, RemB,and Command 2 Stryker-styleBladesFITS MicroAire® andHall® Sagittal Saw(Models 1950, 1955, 2250,6670, 6672, and 6673)ZS-style hubMicroAire® & Linvatec® Sagittal Saw BladesZS-115 7 mm 29.5 mm 0.4 mm 0.4 mm 32ZS-125 9 mm 31 mm 0.4 mm 0.4 mm 32ZS-225 9 mm 31 mm 0.4 mm 0.4 mm 22ZS-410 5.5 mm 11.4 mm 0.4 mm 0.4 mm 32ZS-412 5.5 mm 18 mm 0.4 mm 0.4 mm 32ZS-414 5.5 mm 25 mm 0.4 mm 0.4 mm 32To search by manufacturer part number or dimensions, visit www.microaire.com 33

Blades for Small-Bone Power SystemsSagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesTitanium Nitride-CoatedACL BladesMicroAire® andHall® Sagittal Saw(Models 1950, 1955, 2250,6670, 6672, and 6673)Part No.WidthUsableLengthCutThicknessMaterialThicknessZS-382 8 mm 12 mm 0.64 mm 0.38 mm 18ZS-390 9.5 mm 10 mm 0.64 mm 0.38 mm 18TPIZS-395 9.5 mm 15 mm 0.64 mm 0.38 mm 18Sagittal Saw Blades MicroAire® & Linvatec®SagittalSaw BladesFor the Wright® MedicalTechnologies Rayhack® SystemPart No.WidthUsableLengthCutThicknessMaterialThicknessZS-110 19.1 mm 40 mm 0.6 mm 0.5 mm 22ZS-510 14 mm 40 mm 0.6 mm 0.5 mm 22TPI34microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThickness1200-001 12.7 mm 21.5 mm 0.5 mm 0.3 mm 361200-003 12.7 mm 25 mm 0.5 mm 0.3 mm 361200-005 6.9 mm 19.8 mm 0.5 mm 0.3 mm 36TPISagittalSaw BladesMicroAire® Sagittal Saw(Models 1220, 1920T, 1920,1922, 2200, and 6200)MicroAire® & Linvatec® Sagittal Saw Blades1200-006 4.1 mm 15 mm 0.5 mm 0.3 mm 361200-007 4.3 mm 15 mm 0.5 mm 0.3 mm 321200-008 8.1 mm 21.5 mm 0.5 mm 0.3 mm 361200-009 10.2 mm 17.8 mm 0.5 mm 0.3 mm 361200-010 10.2 mm 13.2 mm 0.5 mm 0.3 mm 361200-011 8.1 mm 6.6 mm 0.5 mm 0.3 mm 361200-012 9 mm 13.7 mm 0.5 mm 0.3 mm 36To search by manufacturer part number or dimensions, visit www.microaire.com 35

Blades for Small-Bone Power SystemsSagittal Saw Blades MicroAire® & Linvatec®MicroAire® Sagittal Saw(Models 1220, 1920T, 1920,1922, 2200, and 6200)Part No.WidthUsableLengthCutThicknessMaterialThickness1200-013 12.7 mm 29 mm 0.5 mm 0.3 mm 361200-014 7.5 mm 15 mm 0.5 mm 0.3 mm 361200-017 5.8 mm 15 mm 0.5 mm 0.3 mm 36TPI1200-018 10.2 mm 18 mm 0.5 mm 0.3 mm 361200-019 6.9 mm 30 mm 0.5 mm 0.3 mm 361200-019A 6.9 mm 12 mm 0.5 mm 0.3 mm 221200-038 9.4 mm 25.5 mm 0.6 mm 0.4 mm 3636microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessMS-121 6.4 mm 15.7 mm 0.9 mm 0.7 mm 27MS-122 6.4 mm 31.7 mm 0.9 mm 0.7 mm 26MS-123 10.4 mm 15.7 mm 0.9 mm 0.7 mm 27TPISagittalSaw BladesHall® (3M®) Mini-DriverK120 Sagittal Saw InsertMicroAire® & Linvatec® Sagittal Saw BladesMS-124 10.4 mm 31.7 mm 0.9 mm 0.7 mm 26MS-125 15.4 mm 15.7 mm 0.9 mm 0.7 mm 27MS-131 6.4 mm 15.7 mm 0.6 mm 0.4 mm 27MS-132 6.4 mm 31.7 mm 0.6 mm 0.4 mm 26MS-134 10.4 mm 31.7 mm 0.6 mm 0.4 mm 26To search by manufacturer part number or dimensions, visit www.microaire.com 37

Blades for Small-Bone Power SystemsReciprocating Saw Blades MicroAire® & Linvatec®Reciprocating Saw BladesMicroAire® Reciprocating Saw (Models 1400, 1945, 2420, and 6420)Part No.WidthUsableLengthCutThicknessMaterialThickness1400-001 1.5 mm 25.4 mm 0.7 mm 0.4 mm 321400-002 1.5 mm 38.1 mm 0.7 mm 0.4 mm 321400-003 3 mm 12.7 mm 0.9 mm 0.5 mm 30TPI1400-004 3 mm 12.7 mm 0.9 mm 0.5 mm 301400-005 5 mm 22.9 mm 0.6 mm 0.4 mm 301400-006 4.3 mm 40 mm 0.8 mm 0.5 mm 24Reciprocating Saw Blades MicroAire® & Linvatec®Reciprocating Saw BladesMicroAire® Reciprocating Saw (Models 1945, 2420, and 6420)Part No.WidthUsableLengthCutThicknessMaterialThicknessZR-020 7.6 mm 25.4 mm 0.6 mm 0.4 mm 33ZR-021 9.4 mm 39.1 mm 0.6 mm 0.4 mm 33ZR-050 5.8 mm 6.8 mm 0.8 mm 0.5 mm 21TPIZR-051 5.0 mm 17.2 mm 0.8 mm 0.5 mm 21ZR-052 6.1 mm 23.1 mm 0.8 mm 0.5 mm 21ZR-053 7.3 mm 25.1 mm 0.8 mm 0.5 mm 2138microaire.com

Blades for Small-Bone Power SystemsPart No.WidthUsableLengthCutThicknessMaterialThicknessZR-120 3.6 mm 25.4 mm 0.5 mm 0.4 mm 22ZR-154 7.4 mm 23.6 mm 0.64 mm 0.4 mm 36ZR-733 6.4 mm 22.9 mm 0.64 mm 0.4 mm 20Sternum Saw BladesPart No.Part No.WidthWidthUsableLengthUsableLengthCutThicknessCutThicknessMaterialThicknessZR-031 6.6 mm 53.6 mm 1 mm 0.6 mm 18MaterialThicknessZR-032 5.6 mm 34 mm 1.0 mm 0.6 mm 18TPITPITPISternumSaw BladesLinvatec® Sternum Saw(Model 5059-05)SternumSaw BladesMicroAire® Sternum Saw(Model 4800)Linvatec® Sternum Saw(Model 5059-05)MicroAire® & Linvatec® MicroAire® & Linvatec® Sternum Saw BladesPart No.WidthUsableLengthCutThicknessMaterialThicknessZR-032M 5.6 mm 34 mm 1.0 mm 0.6 mm 18TPISternumSaw BladesMicroAire® Sternum Saw(Model 7800)ZR-033M 5.6 mm 34 mm 1.0 mm 0.6 mm 16To search by manufacturer part number or dimensions, visit www.microaire.com 39

Sternum Saw BladesSternum Saw Blades MicroAire® & Linvatec®SternumSaw BladesLinvatec®/Hall®Repeat Sternotomy Saw(Model 5057)Part No.ZO-079ZO-079WidthUsableLengthCutThicknessMaterialThickness53.3 mm 30 mm 0.6 mm 0.4 mm 18TPISternum Saw Blades MicroAire® & Linvatec®SternumSaw BladesMicroAire® Oscillating Saw(Models 7200, 7205, 7600 and 7506)Linvatec® Oscillating Saw(Models 5052 and 5044-02PowerPro®, M-Power®, and M-Power ®2)Part No.ZO-707930 mm20 mmWidth10 mmUsableLengthCutThicknessMaterialThickness53 mm 30 mm 0.60 mm 0.4 mm 22TPIZO-712542 mm 50 mm 1.1 mm 0.6 mm 2210 mm20 mm30 mm40 mm50 mm40microaire.com

Sternum Saw BladesPart No.ZO-713730 mm20 mm10 mmWidthUsableLengthCutThicknessMaterialThickness83 mm 30 mm 1 mm 0.6 mm 22TPIMicroAire® Oscillating Saw(Models 7200, 7205, 7600 and 7506)Linvatec® Oscillating Saw(Models 5052 and 5044-02) PowerPro®,M-Power®, and M-Power ®2MicroAire® & Linvatec® Sternum Saw BladesZO-7225 51 mm 19 mm 0.7 mm 0.4 mm 18ZO-7226 63.5 mm 19 mm 0.7 mm 0.4 mm 18To search by manufacturer part number or dimensions, visit www.microaire.com 41

BursBursMedium-Length Burs MicroAire® & Linvatec®MicroAire® Medium-Length BursMicroAire® Drill with Built-on Medium Bur Guard(Models 1140, 1910, 1910T, 1930, 1932, 1940, 1940T, 2100, 2120, 2130, 2910, 2950, 6100, 6120, and 6130- Also fits Linvatec® Micro Drills withMedium Bur Guard.Caution:Do not use burs with headdiameters larger than 4mmin the 1910, 1910T, 2130, 2910,2950, or 6130 High SpeedDrills. The burs may breakand cause injury. Lengthmust be more than 47.8 mmand less than56.9 mm. Do not use longburs without the properbur guard.Part No.End-Side Cut Carbide (Suture Holes)Head SizeDiameterHeadLength# ofFlutesOverallLengthZB-100 .5 mm 4.6 mm 6 50.8 mmSide-Cut CarbideZB-101 1 mm 5.1 mm 6 50.8 mmZB-104 1.5 mm 7.6 mm 6 50.8 mmSide-Cut Tapered CarbideZB-102 1.5 mm 10.2 mm 6 50.8 mmZB-103 1 mm 5.1 mm 6 50.8 mmZB-106 2 mm 7.6 mm 6 50.8 mmZB-113 2 mm 4.9 mm 6 50.8 mmZB-114 2 mm 19.1 mm 6 56.9 mmLindemann Stainless SteelZB-112 1.6 mm 31.8 mm 4 66.5 mmRound-Cut CarbideZB-121 1 mm 1 mm 6 50.8 mmZB-122 1.5 mm 1.5 mm 6 50.8 mmZB-124 2 mm 2 mm 6 50.8 mmZB-125 2.4 mm 2.4 mm 6 50.8 mmZB-126 3 mm 3 mm 8 50.8 mmZB-128 4 mm 4 mm 8 48.3 mmZB-130 5 mm 5 mm 10 48.3 mmZB-132 6.5 mm 6.5 mm 10 48.3 mm42microaire.com

BursPart No.Oval-Cut CarbideHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-136 4 mm 7.9 mm 8 47.8 mmZB-138 5.5 mm 9.9 mm 10 47.8 mmSwanson Pilot Point ReamerZB-142 2 mm 8.6 mm 4 57.2 mmZB-143 3 mm 13.7 mm 5 61.2 mmMicroAire®Medium-Length BursAlso fits Linvatec® MicroDrills with Medium BurGuard.MicroAire® & Linvatec® Medium-Length BursZB-144 4 mm 16.8 mm 6 62 mmZB-145 5 mm 18.5 mm 8 63 mmWire Pass DrillZB-147 1.0 mm 19.1 mm 2 50.8 mmZB-148 1.5 mm 19.1 mm 2 50.8 mmZB-149 2 mm 7.9 mm 2 50.8 mmBarrel-Cut CarbideZB-152 2 mm 10.2 mm 8 50.8 mmZB-154 4 mm 10.2 mm 12 47.8 mmRound DiamondZB-160 2 mm N/A 50.8 mmZB-164 4 mm N/A 47.8 mmZB-168 6 mm N/A 47.8 mmOval DiamondZB-170 4 mm 7.9 mm N/A 48.3 mmZB-180 4 mm 15 mm N/A 48.3 mmZB-181 7 mm 15 mm N/A 48.3 mmTo search by manufacturer part number or dimensions, visit www.microaire.com 43

BursMedium-Length Burs MicroAire® & Linvatec®MicroAire®Medium-Length BursAlso fits Linvatec® MicroDrills with Medium BurGuard.Part No.Diamond DermabradersHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-182 12 mm 15 mm N/A 49 mmZB-183 10.0 mm 15 mm N/A 49.3 mmZB-184 5.0 mm 10.2 mm N/A 49.3 mmLindemann CarbideZB-190 1.5 mm 15.2 mm 4 48.3 mmShannon 44 (Stainless Steel)ZB-192 2.3 mm 14 mm 3 50.8 mmLong Burs MicroAire® & Linvatec®MicroAire® Long BursMicroAire® Drill Models with 1100-005 Bur Guard (Models 1140, 1930, 1932, 1940, 1940T, 2100, 2120, 6100, and 6120)MicroAire® Drill Models with 2910-011 Bur Guard (Models 2130, 2910, 2950, and 6130 high-speed drills)MicroAire® Drill Models with 1910-011 Bur Guard (Models 1910 and 1910T high-speed drills)Also fits Linvatec® Micro Drills with Long Bur Guard.All require long bur guardPart No.Head SizeDiameterHeadLength# ofFlutesOverallLengthCautIOn:Do not use burs withhead diameters larger than4 mm in the 1910, 1910T,2130, 2910, 2950 or 6130High-Speed Drills. The bursmay break and cause injury.Length must be more than69.8 mm and less than 80mm. Do not use longburs without the properbur guard.Lindemann CarbideZB-200 1.5 mm 15.2 mm 4 69.9 mmSide-Cut Tapered CarbideZB-203 1.7 mm 12.2 mm 6 69.9 mmSide-Cut CarbideZB-204 1.5 mm 7.6 mm 6 73.2 mmSide-Cut Tapered CarbideZB-206 2 mm 7.6 mm 6 73.2 mmZB-214 2 mm 19.1 mm 6 80 mm44microaire.com

BursPart No.Round-Cut CarbideHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-220 1 mm 1 mm 6 73.2 mmZB-222 1.5 mm 1.5 mm 6 73.2 mmZB-224 2.0 mm 2.0 mm 6 73.2 mmZB-226 3 mm 3 mm 8 73.2 mmMicroAire® Long BursAlso fits Linvatec®Micro Drills with LongBur Guard.MicroAire® & Linvatec® Long BursZB-228 4 mm 4 mm 8 69.9 mmZB-230 5 mm 5 mm 10 69.9 mmZB-232 6.5 mm 6.5 mm 10 69.9 mmOval-Cut CarbideZB-236 4 mm 7.9 mm 8 69.9 mmZB-238 5.5 mm 9.9 mm 10 69.9 mmBarrel-Cut CarbideZB-252 2 mm 10.2 mm 8 73.2 mmZB-254 4 mm 10.2 mm 12 69.9 mmRound DiamondZB-260 2 mm 2 mm N/A 73.2 mmZB-262 3 mm 3 mm N/A 73.2 mmZB-264 4 mm 4 mm N/A 69.1 mmZB-266 5 mm 5 mm N/A 69.1 mmZB-268 6 mm 6 mm N/A 69.1 mmOval DiamondZB-270 4 mm 7.9 mm N/A 69.9 mmTo search by manufacturer part number or dimensions, visit www.microaire.com 45

BursExtra-Long Burs MicroAire® & Linvatec®MicroAire® Extra-Long BursMicroAire® Drill Models with 1100-006 Bur Guard (Models 1140, 1930, 1932, 1940, 1940T, 2100, 2120, 6100, and 6120)MicroAire® Drill Models with 2910-019 Bur Guard (Models 1935, 2130, 2910, 2950, and 6130 high-speed drills)MicroAire® Drill Models with 1910-019 Bur Guard (Models 1910 and 1910T high-speed drills )Also fits Linvatec® Micro Drills with Extra-Long Bur Guard.All require long bur guardCautIOn:Do not use burs withhead diameters largerthan 4 mm in the 1910,1910T, 1935, 2130, 2910,2950, or 6130 High SpeedDrills. The burs may breakand cause injury. Do notuse long burs without theproper bur guard.Part No.Side-Cut Tapered CarbideHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-306 2 mm 7.6 mm 6 95.3 mmRound-Cut CarbideZB-320 1 mm 1 mm 6 95.3 mmZB-322 1.5 mm 1.5 mm 6 95.3 mmZB-324 2 mm 2 mm 6 95.3 mmZB-326 3 mm 3 mm 8 95.3 mmZB-328 4 mm 4 mm 8 95.3 mmZB-330 5 mm 5 mm 10 95.3 mmOval-Cut CarbideZB-336 4 mm 7.9 mm 8 95.3 mmZB-338 5.5 mm 9.9 mm 10 95.3 mmRound DiamondZB-360 2 mm 2 mm N/A 94.5 mmZB-362 3 mm 3 mm N/A 94.5 mmZB-364 4 mm 4 mm N/A 95.3 mmZB-366 5 mm 5 mm N/A 94.5 mm46microaire.com

BursMicroAire® Oral Surgery BursMicroAire® Drill(Models 1140, 1910, 1910T, 1930, 1932, 1940, 1940T, 2100,2120, 2130, 2910, 2950, 6100, 6120 and 6130 high-speed drills)Also fits Linvatec® Micro and High Speed Drills with Medium Bur Guard.All require medium bur guardPart No.Round-Cut CarbideHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-70 2.3 mm 2.3 mm 8 50.8 mmMicroAire® & Linvatec® Oral Surgery BursSide-Cut CarbideZB-71 1.6 mm 4.4 mm 6 50.8 mmTapered Side-Cut CarbideZB-72 1.2mm 4.0 mm 6 50.8 mmZB-73 1.6 mm 4.6 mm 6 50.8 mmZB-74 2.1mm 4.6 mm 6 50.8 mmRound-Cut CarbideZB-75 1.8 mm 1.6 mm 6 50.8 mmRound-End CarbideZB-76 1.2 mm 4.3 mm 6 50.8 mmSide-Cut CarbideZB-77 1.2mm 4.3 mm 6 50.8 mmCross-Cut FissureZB-78 2.1 mm 4.6 mm 8 50.8 mm1100-008MicroAire Drill Nose ShieldSpecial autoclavable silicone nose cap prevents blood and saline from entering the drill nose.Especially important during oral surgery where deposits can damage the bearing and grippingmechanism, resulting in overheating.XXFor models 1930, 1932,1940, 1940T, 2100, 2120, 2130, 2910, 2950, 6100, 6120, and 6130 drillsXXPackage of 10To search by manufacturer part number or dimensions, visit www.microaire.com 47

BursCebotome Burs Linvatec® / Hall®Cebotome Drill BursFor use with Linvatec® (Hall®) Cebotome drillsPart No.Side CuttingHead SizeDiameterHeadLength# ofFlutesOverallLengthZB-581 5 mm 24.3 mm 2 42.7 mmZB-582 6 mm 24.3 mm 2 42.7 mmZB-583 7 mm 24.3 mm 2 42.7 mmRound CuttingZB-584 7 mm 6.1 mm 10 30.2 mmZB-585 8.mm 7.6 mm 10 31.3 mmZB-586 9 mm 8.4 mm 10 32.5 mmShort Round Osteon Burs Linvatec® / Hall®Short Round BursFor use with Linvatec® (Hall®) Osteon drill systemPart No.Head SizeDiameterHeadLength# ofFlutesUsableLengthZB-617 6.5 mm 6.5 mm 10 30 mmZB-618 5 mm 5 mm 10 30 mmZB-619 4 mm 4 mm 8 30 mm48microaire.com

BursMedium Round BursFor use with Linvatec® (Hall®) Osteon drill systemPart No.Part No.Head SizeDiameterHead SizeDiameterHeadLengthHeadLength# ofFlutes# ofFlutesUsableLengthZB-625 6.5 mm 6.5 mm 10 38 mmZB-626 5 mm 5 mm 10 38 mmZB-627 4 mm 4 mm 8 38 mmZB-628 3 mm 3 mm 8 38 mmZB-647 5 mm 5 mm 0 38 mmZB-648 4 mm 4 mm 0 38 mmZB-650 5 mm 5 mm 0 48 mmLong Round BursFor use with Linvatec® (Hall®) Osteon drill systemUsableLengthZB-640 1.5 mm 1.5 mm 6 48 mmZB-642 2 mm 2 mm 6 48 mmZB-644 5 mm 5 mm 10 48 mmLinvatec® / Hall® Medium Round Osteon Burs Linvatec® / Hall® Long Round Osteon BursZB-645 4 mm 4 mm 8 48 mmZB-646 3 mm 3 mm 8 48 mmZB-659 3 mm 3 mm 0 48 mmZB-662 2 mm 2 mm 0 48 mmZB-664 1 mm 1 mm 6 48 mmTo search by manufacturer part number or dimensions, visit www.microaire.com 49

RaspsRaspsRasps MicroAire® & Linvatec®RaspsMicroAire® Reciprocating Saw(Model 1400)Part No.WidthUsableLength1400-011 Cross-Serrated 5.3 mm 11 mm1400-013 Cottle 5.3 mm 15.5 mmMicroAire® Reciprocating Saw(Models 1945, 2420, 1915, 1915Tand 6420)ZR-080Small Straight-Cut5.5 mm 9.5 mmZR-081Large Straight-Cut6.5 mm 12.5 mm50microaire.com

RaspsPart No.ZR-082Small Cross-CutWidthUsableLength5.5 mm 9.5 mmMicroAire® Reciprocating Saw(Models 1945, 2420, 1915, 1915Tand 6420)MicroAire® & Linvatec® RaspsZR-083Large Cross-Cut6.5 mm 12.5 mmZR-084Small Intramedullary5.3 mm 24.5 mmTo search by manufacturer part number or dimensions, visit www.microaire.com 51

K-Wires and Steinmann PinsK-Wires MicroAire® & Linvatec®K-WiresXXSmooth or threadedXX4-, 6-, and 9-inch lengthsXX6-packs onlyXXSterile or non-sterileTo order non-sterile, add “NS” to the end of the product numberLength Point Style Type0.7 mm /.028”0.9 mm /.035”Wire Diameter1.1 mm /.045”1.4 mm /.054”1.6 mm /.062”Single Trocar Smooth 1604-128 1604-135 1604-145 1604-154 1604-1624”Double TrocarSmooth 1600-428 1600-435 1600-445 1600-454 1600-462Threaded 1600-435T 1600-445T 1600-454T 1600-462T6” Double TrocarSmooth 1600-628 1600-635 1600-645 1600-654 1600-662Threaded 1600-635T 1600-645T 1600-654T 1600-662TSingle Trocar Smooth 1600-9355 1600-9455 1600-9545 1600-96259”Double TrocarSmooth 1600-935 1600-945 1600-954 1600-962Threaded 1600-935T 1600-945T 1600-954T 1600-962TK-Wires with Wire Guide MicroAire® & Linvatec®K-Wires with Wire GuideFor MicroAire® Pencil Grip Wire Driver(Models 1620, 1625, 1995 and 2600)XX6-packs onlyLength Point Style Type0.7 mm /.028”0.9 mm /.035”Wire Diameter1.1 mm /.045”1.4 mm /.054”1.6 mm /.062”5.5” Double Trocar Smooth 1600-020 1600-021 1600-022 1600-023Wire Guide only (non-sterile) 1600-009NS 1600-010NS 1600-011NS 1600-013NS 1600-012NSColor Red Blue Yellow White Black52microaire.com

K-Wires and Steinmann PinsSteinmann PinsXXSmooth or threadedXX9-inch lengthsXXSingle- or double-pointedXXDiamond or Trocar pointsXX6-packs onlyXXSterile or non-sterileTo order non-sterile, add “NS” to the end of the product numberLength Point Style Type9”SingleTrocarDoubleTrocarSingleDiamondDoubleDiamond2.0 mm /5/64”K-Wire & Pin ProtectorsXXMolded thermoplasticXXProtection from sharp pointsXXSold in sterile 4-packsFor K-WiresFor Steinmann Pins2.4 mm /3/32”2.8 mm /7/64”Wire Diameter3.2 mm /1/8”3.6 mm /9/64”4.0 mm /5/32”4.8 mm /3/16”Smooth 1620-509 1624-509 1628-509 1632-509 1636-509 1640-509 1648-509Threaded 1620-509T 1624-509T 1628-509T 1632-509T 1636-509T 1640-509T 1648-509TSmooth 1620-109 1624-109 1628-109 1632-109 1636-109 1640-109 1648-109Threaded 1620-109T 1624-109T 1628-109T 1632-109T 1636-109T 1640-109T 1648-109TSmooth 1620-609 1624-609 1628-609 1632-609 1636-609 1640-609 1648-609Threaded 1620-609T 1624-609T 1628-609T 1632-609T 1636-609T 1640-609T 1648-609TSmooth 1620-709 1624-709 1628-709 1632-709 1636-709 1640-709 1648-709Threaded 1620-709T 1624-709T 1628-709T 1632-709T 1636-709T 1640-709T 1648-709T0.7 mm /.028”0.9 mm /.035”Wire Diameter1.1 mm /.045”1.6 mm /.062”1601-028 1601-035 1601-045 1601-062Color: Yellow Blue White Green2.0 mm /5/64”2.4 mm /3/32”2.8 mm /7/64”Wire Diameter3.2 mm /1/8”3.6 mm /9/64”4.0 mm /5/32”4.8 mm /3/16”MicroAire® & Linvatec® Steinmann Pins MicroAire® & Linvatec® K-Wire & Pin Protectors1601-564 1601-332 1601-764 1601-180 1601-964 1601-532 1601-316Color: Pink Gray Tan Lavendar Brown Navy Blue OrangeTo search by manufacturer part number or dimensions, visit www.microaire.com 53

Twist Drills and TapsStandard Orthopedic Twist Drills MicroAire® & Linvatec®Standard Orthopaedic Twist DrillsFor MicroAire® Jacobs® Drill CouplersAlso fits all other standard Jacobs®-Style Drill Couuplers (Hall®,Stryker®, Synthes®, Aesculap®, DeSouter®, Brasseler®, etc.)XXSterile or non-sterileTo order non-sterile, add “NS” to the end of the product numberDiameter Length MicroAire Part # Replaces Zimmer®MicroAire Standard Twist Drills1.6 mm8054-010 256-01-212.0 mm 8054-011 256-01-222.4 mm 8054-012 256-01-23127 mm2.8 mm 8054-013 256-01-243.2 mm 8054-014 256-01-253.6 mm 8054-015 256-01-264.0 mm8054-016 256-01-274.5 mm 8054-017 256-01-28127 mm4.8 mm 8054-018 256-01-296.4 mm 8054-019ECT® Twist Drills*2.0 mm8054-020 2318-202.8 mm 8054-021 2318-273.2 mm 127 mm 8054-022 2318-323.6 mm 8054-023 2318-354.5 mm 8054-024 2318-45* ECT® European Compression Technique54microaire.com

Twist Drills and TapsSmall Power Instrument Twist DrillsFor MicroAire® Wire Driver (Models 1620, 1625, 1995 and 2600 with wire guide)XXWire guide required (not included)XXSold individuallyXXSterile or non-sterileTo order non-sterile, add “NS” to the end of the product numberDiameter Length MicroAire Part #2.0 mm 65 mm 8051-1202.7 mm 79 mm 8051-127Wire Guide for DrillsSold in packs of 6Non-sterile only1600-012NSMicroAire® & Linvatec® Small Power Instrument Twist DrillsStandard Twist Drills with 2.34 mm Dental Bur Shank - May be used in standard MicroAire® and Linvatec® Micro DrillsXXSold individuallyXXSterile or non-sterileTo order non-sterile, add “NS” to the end of the product numberDiameter Length MicroAire Part #1.1 mm 49 mm 8051-0111.3 mm 49 mm 8051-0131.5 mm 49 mm 8051-0151.8 mm 49 mm 8051-0182.0 mm 65 mm 8051-0202.2 mm 49 mm 8051-0212.7 mm 79 mm 8051-0273.2 mm 79 mm 8051-0323.5 mm 79 mm 8051-035Caution:Do not operate above 10,000 RPM.Do not use in high-speed drill.To search by manufacturer part number or dimensions, visit www.microaire.com 55

Blades for Small-Bone Power Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?