LATHE CHUCKS
LATHE CHUCKS
LATHE CHUCKS
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECIAL <strong>CHUCKS</strong> ▪ WITH MORSE TAPER123456Type 9187ROTATING WITHBLOCKING■■Allows for use in horizontal and vertical positions■■Can replace typical center in machine tailstock■■Lathe chuck not included, please choose one of our suitable optionsCode No. Type W*W - Chuck diameterMorseTaper D1 D2 D3 B L1 L2 L3 L4 M rpm kg359187042600 9187-80-2 80 2 56 67 82 - 136,5 72,5 67,5 2,5 M6 3.000 2,5359187043900 9187-80-3 80 3 56 67 82 - 153,5 72,5 67,5 2,5 M6 3.000 2,7359187044100 9187-100-3 100 3 70 83 100 - 157,5 76,5 71,5 3 M8 2.500 3,8359187045400 9187-100-4 100 4 70 83 100 - 180,5 78 71,5 3 M8 2.500 4,1359187031100 9187-125-4 125 4 95 108 125 - 189,5 87 80,5 3,5 M8 2.000 6359187032400 9187-125-5 125 5 95 108 125 - 216,5 87 80,5 3,5 M8 2.000 6,8359187040000 9187-160-4 160 4 125 140 160 125 189,5 87 80,5 3,5 M10 1.800 7,6359187041300 9187-160-5 160 5 125 140 160 125 216,5 87 80,5 3,5 M10 1.800 8,24-Jaw3-JawPlease choose your desired chuck:Type 3574 Page 30Type 3575 Page 30Type 3274 Page 31Type 3275 Page 31Type 3774 Page 40Type 3775 Page 40Type 3674 Page 41Type 3675 Page 419187635078 Type of mounting Material of chuck body Number of jawsType of jawswww.bison-bial.com • e-mail: sales@bison-bial.com • Tel. +48 (85) 741 31 85 • Fax +48 (85) 732 76 58