You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
®<br />
Industrial<br />
<strong>Dampers</strong>
<strong>Esscano</strong> <strong>Power</strong> are proud to offer complete damper system solutions for all types of industrial dampers.<br />
Our expertise stems from the Scan-Bi-Com company which was founded in 1976 and supplied both<br />
individual dampers and damper system solutions all over the World. In 2002 Scan-Bi-Com was acquired<br />
by <strong>Esscano</strong> <strong>Power</strong>, and our continual references display <strong>Esscano</strong> <strong>Power</strong>s´ International experience as<br />
damper suppliers, consulting engineers and trouble shooters for various damper applications.<br />
Our dampers are specifi cally and individually designed for the desired purpose. The units are supplied<br />
complete with comprehensive manuals for installation, commissioning and maintenance in accordance<br />
to our Quality Management Handbook.<br />
We supply: <strong>Dampers</strong>, individually designed for any application, manufactured from various materials<br />
including duplex stainless steels and fi breglass.<br />
We offer: Advice, design, manufacture, delivery, installation, commissioning, repairs and maintenance.<br />
Types: Louvre dampers, 3 way diverter dampers, fl aps, butterfl y dampers, biplane dampers, non-return<br />
fl aps, stack dampers, guillotine dampers, diesel/gas engine dampers, fi re dampers, sliding gates, silo<br />
dampers, inlet guide vane dampers.<br />
Special Types: Special damper units for the food processing industry or other sanitary applications,<br />
100% sealing dampers without seal air, collaboration designed dampers.<br />
Applications: Filter systems, fl ue gas cleaning, gas turbine, boiler and diesel plants, process- and<br />
cement industry, plus Refi nery and Offshore installations.<br />
Sizes: Max. dimension on DN 6000 mm or 5000 x 8000 mm.<br />
Temperatures: From -80˚C to +1100˚C<br />
Tightness: As per customer requirements, up to 100% sealing can be achieved with or without sealing<br />
air. All types are ambient tight.<br />
Actuators: Manual, electric, pneumatic, hydraulic, all available from any manufacturer.<br />
Accessories: Ducts, expansion joints, electrical junction boxes, limit switches etc.<br />
Service: Repair and modifi cation on any make of damper.<br />
General Introduction<br />
This brochure provides an overview of our product range for industrial dampers. We trust you will fi nd<br />
the information of interest and that you will consider us for your future damper requirements including<br />
replacement / refurbishment of existing damper installations, whatever make. Our aim is to provide<br />
total damper system solutions.<br />
Should you require literature covering the other business areas of <strong>Esscano</strong> <strong>Power</strong>, which include<br />
sales/service and maintenance of steam turbine plant, sales of valves, rupture discs and other<br />
instrumentation please contact us on DK: +45 4488 0070 UK: +44 1480 210601 or visit our Website DK:<br />
www.esscano.dk UK: www.esscano.com to discover more.<br />
Design and Engineering Capabilities<br />
To ensure that our in house engineering experience is delivered to customers in the most<br />
effective way <strong>Esscano</strong> <strong>Power</strong> has invested in the latest technology tools. Our capabilities in<br />
design and engineering include:<br />
Solid Works<br />
All dampers are designed using Solid Works 3D modelling. This<br />
ensures the product is functionally correct and all of the produc-<br />
tion drawings will be fully in accordance with the designed damper.<br />
Cosmos<br />
Where necessary designs are interrogated using COSMOS fi nite element and Structural<br />
Design Analysis to ensure the optimum design to meet the customers requirements.<br />
Designs can be done in accordance with DIN, EN, DS, ISO, API standards.
Butterfl y <strong>Dampers</strong><br />
Single blade dampers.<br />
Used for on/off fl ow control.<br />
FLAP ISOLATOR and DIVERTER DAMPERS<br />
These dampers are typically used for isolation and gas-fl ow changeover operations. They are characterised<br />
by their very low leakage rates, achieving 99,98% sealing effi ciency per unit surface area. Our seal<br />
air pressure system with a highly effective fl exible metallic twin seal, ensures zero leakage in line with<br />
accident prevention legislation.<br />
Flap isolators and diverter dampers for fl ue gas desulphurisation plants are supplied in stainless steel<br />
or alternatively internal surfaces can be lined with glass fl ake or rubber coatings. These corrosion protection<br />
measures enable us to offer cost-effective solutions for applications involving one-sided exposure<br />
to aggressive gases.<br />
<strong>Esscano</strong> <strong>Power</strong> have developed their own special blade and seal system for operation in de-nox plants<br />
and systems handling dust-laden fl ue gas at temperatures above 400˚C. For gas turbine plants linked to<br />
waste heat recovery boilers, the isolator blades and inside the housing can be thermally insulated to<br />
minimise radiation losses.<br />
BUTTERFLY, LOUVRE AND BI PLANE DAMPERS<br />
These dampers are typically installed to isolate and control fl ue gases.<br />
Louvre <strong>Dampers</strong><br />
With parallel blade motion<br />
Used for isolation and fl ow<br />
control. The blades rotate in<br />
the same direction.<br />
Louvre <strong>Dampers</strong><br />
with Opposed Blade Motion<br />
Single blade dampers.<br />
Used for on/off fl ow control.<br />
Butterfl y Damper Ø500<br />
3-Way Diverter Damper<br />
For changing over gas fl ow<br />
or simultaneously isolating<br />
one duct.<br />
Louvre Damper 2000x2500<br />
Louvre Damper Ø3400<br />
Bi Plane <strong>Dampers</strong><br />
Two dampers in one. The blades<br />
are designed as hollow, which<br />
when closed and fi tted with seals,<br />
form compartments which can be<br />
pressurised with seal air. Biplane<br />
dampers with S3 or S5 seals are<br />
developed to provide a simple<br />
space saving method of ensuring<br />
zero leakage.<br />
Damper Types<br />
Guillotine<br />
For shut-off use.<br />
Flap Isolators/Non Return<br />
<strong>Dampers</strong><br />
For geometrical reasons these are<br />
two bladed and open towards the<br />
centre of the duct.<br />
Guillotine Damper 400x400<br />
Diverter<br />
Damper<br />
Ø600
S0 S1 S2 S3 S4 S5 S6<br />
Type S4 with sealing air<br />
Type: S0<br />
No seals or landing bars<br />
Tightness: 96% - 98%.<br />
Type: S2<br />
Landing bars all over<br />
Tightness: 99% - 99,5%.<br />
Type: S1<br />
Landing bars on top<br />
and bottom<br />
(square/rectangular only)<br />
Tightness: 98% - 99%.<br />
Type: S3<br />
Metallic seals and landing<br />
bars all over<br />
Tightness: 99,5% - 99,9%.<br />
Main Seal Types<br />
Standard Shaft Seals<br />
1. Pressure disc, AISI 316Ti (EN 1.4571)<br />
2. Sealing disc, reinforced graphite SGB C<br />
3. Spring after DIN 1.7224 of EN 1.4310<br />
4. Shaft, AISI 304 (EN 1.4301)<br />
5. Landing bar, material as duct<br />
6. Blade, material as duct<br />
7. Locking pin, AISI 304 (EN 1.4301)<br />
8. Duct<br />
9. Bearing house, material as duct<br />
10. Bearing, reinforced graphite<br />
11. Distance washer, AISI 316Ti (EN 1.4571)<br />
This arrangement is maintenance<br />
and lubrication free.<br />
Type: S3<br />
Double seals for<br />
sealing air 100%,<br />
with sealing air.<br />
Type: S4<br />
Pillow/Bulb metallic<br />
seals all over<br />
(rectangular only).<br />
Tightness: 99,8% - 99,95%<br />
with sealing air 100%.<br />
Type: S5<br />
Pressing metallic seals<br />
and landing bars all over.<br />
Tightness: 99,5% - 99,9%<br />
with sealing air 100%.<br />
Type: S6<br />
Special developed<br />
pressing profi le in Viton.<br />
Tightness: 100%,<br />
without sealing air.
®<br />
Contact<br />
Contact <strong>Esscano</strong> <strong>Power</strong><br />
We trust you have found the information contained within our damper brochure of interest and that you<br />
will consider us for your future damper requirements including replacement/refurbishment of existing<br />
damper installations, whatever make.<br />
Our aim is to provide total damper system solutions<br />
Should you wish to contact us in connection with damper enquiries or require literature covering the<br />
other business areas of <strong>Esscano</strong> <strong>Power</strong>, which include sales/service and maintenance of steam turbine<br />
plant, sales of valves, rupture discs and other instrumentation<br />
please contact us on DK: +45 4488 0070 UK: +44 1480 210601<br />
or visit our Website DK: www.esscano.dk UK: www.esscano.com to discover more.<br />
<strong>Esscano</strong> <strong>Power</strong> A/S · Tempovej 42 · DK - 2750 Ballerup · Tel. +45 4488 0070 · Fax +45 4488 0076 • www.esscano.dk