FLAIL MOWERS / SHREDDERS - Rankin Equipment Co.

SEVERE DUTY FLAIL MOWERS / SHREDDERS55-90 HP • 69", 79" & 89"OLS SERIESFEATURES:• Low profile belt housing and gearbox• Three rows forged cutter bars• 90 HP gearbox with built in over-running clutch• 5 belt drive, rated for 4" material• Hydraulic linear sideshift - providesup to 22" offset• Close coupled for tractor stability• Adjustable rear hatch• Double wall deck• Rotor bearings are double self aligning• Safety Protection: Front Double Row Chainsand Rear Rubber FlapOLS SERIES Flail Mowers/Shredders are designed for severe conditions and are ideal for mulching prunings andmowing heavy grass. Available in 69", 79" & 89" cutting widths. The 2000 RPM rotor is equipped with 3 lb. dropforged hammer knives designed to mow grass and shred brush up to 4" diameter. An adjustable rear hatch in openposition discharges grass and allows tractor speeds up to 6 MPH, and in closed position contains and further shredsbrush to a finer mulch. The hydraulic sideshift hitch allows quick setting from center mount to offset and is closecoupled to the tractor for stability. Equipped with chain guards in front and rubber shielding on rear for safety protection.The "low profile" belt housing and gearbox is a great advantage when operating in orchards and vineyards.MODELSWORKINGWIDTHOVERALLWIDTHHPREQ’DHITCHFLAILSHOUSINGTHICKNESSROTOR DIA.LESS BLADESNO. OFBELTSOLS-175 69" 75" 50 Cat. 2 Hyd Offset 18 Hammers 1/4" double wall 6-1/4" x 9/16" Wall 5 1795OLS-200 79" 89" 55 Cat. 2 Hyd Offset 21 Hammers 1/4" double wall 6-1/4" x 9/16" Wall 5 1925OLS-225 89" 99" 65 Cat. 2 Hyd Offset 21 Hammers 1/4" double wall 6-1/4" x 9/16" Wall 5 2055WEIGHT

FLAIL MOWERS / SHREDDERSVARIABLE OFFSET Up to 85 HP • 69", 79", 89", 98"REVERSIBLE Up to 85 HP • 69", 79", 89", 98"SMO SERIESFEATURES:• Variable Offset Series - provides up to 24" offset• Reversible Series - front or rear center mount• Cat. 1 & 2, 3-point hitch• Shreds brush & prunings up to 3", constant use 2-1/2"• Drop forged hammer knives and cutter bars• 85HP gearbox with built-in overrunning clutchSMO Series Mowers/Shredders are ideal for mulching prunings and mowing heavy grass in cover crop applications.Available in 69", 79", 89" & 98" cutting widths. The 2000 RPM rotor is equipped with 3 lb. drop forged hammer knives designedto mow grass and shred brush up to 3" diameter. The rotor housing is equipped with two rows of drop forged cutterbars to increase shredding efficiency. Equipped with an adjustable rear hatch - open position for lowest power requirementfor grass mowing - closed position holds in material for brush shredding. Cutting height adjusts 1" to 4". Equipped with chainguards in front and rubber flap on rear for safety protection. Variable Offset Series - optional hydraulic sideshift cylinder.MODELSWORKINGWIDTHOVERALLWIDTHHPREQ’DHITCHFLAILSHOUSINGTHICKNESSROTOR DIA.LESS BLADESROLLERDIA.NO. OFBELTSWEIGHTSMO-175 69" 78" 40Cat. 1 & 2Variable Offset18 Hammers5MM Dbl. SkinFront & Rear5-1/2" 5-1/4" 4 1210SMO-200 79" 88" 45Cat. 1 CenterVariable Offset21 Hammers5MM Dbl. SkinFront & Rear5-1/2" 5-1/4" 4 1368SMO-225 89" 99" 50Cat. 1 CenterVariable Offset21 Hammers5MM Dbl. SkinFront & Rear6-1/2" 6" 5 1521SMO-250 98" 105" 55Cat. 1 & 2Variable Offset24 Hammers5MM Dbl. SkinFront & Rear6-1/2" 6" 5 1697SMO-REV-175 69" 78" 40-50Cat. 1 & 2Reversible18 Hammers5MM Dbl. SkinFront & Rear5-1/2" 5-1/4" 4 1265SMO-REV-200 79" 88" 45-50Cat. 1 CenterReversible21 Hammers5MM Dbl. SkinFront & Rear5-1/2" 5-1/4" 4 1440SMO-REV-225 89" 99" 50-60Cat. 1 CenterReversible21 Hammers5MM Dbl. SkinFront & Rear6-1/2" 6" 5 1605SMO-REV-250 98" 105" 55-65Cat. 1 & 2Reversible24 Hammers5MM Dbl. SkinFront & Rear6-1/2" 6" 5 1785