Meaco DD8L desiccant dehumidifier Instruction Manual

EMPTYING THE WATERContinuous DrainageWhen the water container is full:An alarm signal will soundThe Empty Tank LED will flashThe dehumidifier will stop automatically.Empty the water container and replace it in the correct position.The dehumidifier will start to work again.If the “Empty tank” light stays on and the unit does not start up then the tank is not correctly fitted.It is possible to connect the drainage hose (included in the box) to the dehumidifier for permanent waterdrainage. Simply connect the hose to the drain spout and ensure that the end of the hose is lower than thedrain opening, otherwise the water will not drain and flooding may occur.Water spigotWhen you no longer wish to use the permanent water drainage, disconnect the drainage tube from thedevice. Ensure that the water container is positioned correctly.12