FAG VIPDENS C3

25365 Fag Vipdens C3 27.9.2000 13:33 Page 2
UGRA/FOGRA POSTSCRIPT CONTROL STRIP - COPYRIGHT 1990 - Version 1.2 EPS
Nessie
PostScript V.47.0
300 DPI/85µ
FAG-VRG SA
PostScript Level 1
Hamburgefons
Hamburgefons
TECHNICAL SPECIFICATIONS
1 1
2 2
3 3
4 4
100
FAG VIPDENS C3
Simply Perfect – Perfectly Simple
Automatic zero setting
● Automatic colour recognition
● Density and density difference
● Colour balance
● Automatic recognition of function
● Dot % (Murray Davis)
● Dot gain for 2 patches
● Slope adjustment
● Aperture 3.3 mm
● Measuring range:
Density 0.00 – 2.50
Percent 0 – 100
● Measuring time approx. 0.05 sec.
● Digital display LCD symbol height 10 mm
● Repeatability density ± 0.01 D
● Linearity accuracy percent ± 1 %
● Serial interface unidirectional RS 232
● Measurements per battery set > 1’000'000
● Battery 2 alcaline batteries AA Type
● Weight 290 g
● Dimensions 145 x 76 x 41 mm
● Footplate polycarbonate strenghtened with fibreglass
Modification rights reserved.
FAG • GRAPHIC SYSTEMS S.A.
5, rue de la Vigie • CH-1003 Lausanne • Switzerland
0
3
97
5
95
10
90
20
80
30
70
40
60
50 1x1 2x2 4x4
50
A unit, simple and practical, having the
two essential measuring modes.
The simple handy densitometer for tough
daily use in the printing shop gives you the
most important functions for a good quality
control in the printing rooms: density measurement
with automatic colour selection
and Dot Gain measurement (Murray Davis)
with two reference values.
Four versions:
FAG VIPDENS C3
with narrow-band filters.
FAG VIPDENS C3 P
with narrow-band filters and polarizing filters.
www.fag.ch • e-mail:sales@fag.ch
Tél.:++41 21 343 23 23 • Fax:++41 21 343 23 33