5223 UTEX catalog - Utex Industries, Inc.

Square braid, flax fibers thoroughly impregnated with tallow and wax, plus agraphite coat for extra lubrication.Style 204 is available in the following cross-section range:1/8" to 2"3.0 mm to 50.8 mmPerformanceROTARY RECIPROCATING VALVEMax Pressure - psi bar kg/cm 2 100/6.9/7 900/62/63.3 1500/103/106Temp - °F/°C 32° to +250°F(0 to +121°C) 32° to +250°F(0 to +121°C) 32° to +250°F(0 to +121°C)pH Range 5 to 10 5 to 10 5 to 10Max Speed - fpm (mps) 2500(12.7) 300(1.5) 200(1)Square braid, flax fibers impregnated throughout with PTFE to seal the fibers,surface treated with a special break- in lubricant and dry PTFE particles.Style 206 is available in the following cross-section range:1/8" to 2"3.0 mm to 50.8 mmApplicationsStyle 204UTEX Style 204 is suitable for brine, coldwater service, hydraulics, and cold oil services.Style 204 is recommended for generalhydraulics, low-pressure valves, rotary equipment,reciprocating applications, and sterntubes.Style 206UTEXFlax Packings27PerformanceApplicationsROTARY RECIPROCATING VALVEMax Pressure - psi bar kg/cm 2 300/20.7/21.1 900/62/63 1500/103/106Temp - °F/°C 32° to +250°F(0 to +121°C) 32° to +250°F(0 to +121°C) 32° to +250°F(0 to +121°C)pH Range 4 to 11 4 to 11 4 to 11Max Speed - fpm (mps) 3000(15.2) 300(1.5) 200(1)UTEX Style 206 is excellent in water applications,brine applications, and light oils.Style 206 is recommended for rotary shafts,reciprocating applications, and stern tubepacking combinations.Style 253Square braid, flax fiber and lead wire for reinforcement and strength uponremoval and added load bearing characteristics. Braid is treated with marinegrease and wax.Style 253 is available in the following cross-section range:1/8" to 2"3.0 mm to 50.8 mmPerformanceApplicationsROTARY RECIPROCATING VALVEMax Pressure - psi bar kg/cm 2 N/A 1500/103/106 N/ATemp - °F/°C N/A +32° to +250°F(0 to +121°C) N/ApH Range N/A 2 to 12 N/AMax Speed - fpm (mps) N/A 400(2) N/AUTEX Style 253 is suitable for water, oil,hydraulics, and other down hole services.Style 253 is recommended for slow movingreciprocating polished rod applications.